Not able to open Access Manager

Hi,
Not able to open Access Manager after shut down the machine and when its started after a long time ( 2-3 hours), Its giving the error " The page is not found" . After configuring the IIS policy agent in other machine i m not getting the browser what i got b4ly. I m getting "U r not authorized to view this page". Pls reply Very Urgent.

Thanks Karthik.
1. Was this always like this or the issue is seen recently ?
2. Did you try opening Config Manager from Start menu or it's native folder ?
3. What type of Admin Workstation ( AW ) is this, from where you are trying to run config mgr ? Distributor or client AW ?
4. The error indicates towards issue in receiving " Real-time feed ( RTF )" . I would try restarting the AW & see if it restores the RTF which is a process running on it.
5. Try pinging ( ping -t ) to Logger from AW to see if there are any network issues.
GP

Similar Messages

Not able to install Access Manager 7.1 in Legacy Mode with amsamplesilent

HI All,
I am building test setup on Solaris Zones.Recently it was patched to following level *5.10 Generic_138888-03*
I am trying to install Access Manager in Legacy mode with amsamplesilent file.
SERVER_NAME=sesamesso1
SERVER_HOST=$SERVER_NAME.example.com
SERVER_PORT=80
ADMIN_PORT=8989
DS_HOST=ssoldap1.example.com
DS_DIRMGRPASSWD=l0cuz123
ROOT_SUFFIX="dc=example,dc=com"
SM_CONFIG_BASEDN=$ROOT_SUFFIX
ADMINPASSWD=l0cuz123
AMLDAPUSERPASSWD=l0cuz123am
DEBUG_LEVEL=error
DEBUG_DIR=/logs/sso/debug
COOKIE_DOMAIN=.example.com
AM_ENC_PWD=""
NEW_OWNER=wbsrv
NEW_GROUP=javaes
PAM_SERVICE_NAME=other
WEB_CONTAINER=WS
AM_REALM=disabledBut AM is getting installed in Realm Mode. I need to install portal server with this Access Manager.
please confirm,I am doing any mistake in my installation and please let me know whether portal server supports access manager realm mode or not.
Thanks in Advance
Madhu

Thanks for the reply.
I will give a try to install sun portal server 7.2 with accessmanager 7.1 in realm mode.Before patch updation my solaris sparc OS level was *5.10 Generic_118833-36* and I was able to install access manager 7.1 in legacy mode
Is there any thing to be done for new patch level(*5.10 Generic_138888-03*) to install access manager 7.1 in legacy mode.
Please let me know
Thanks
Madhu

Not able to open access/decyption policy pages

Hi Guys,
We aer not able to this. It gives out the below error. I have donloaded the gui logs. Please find them attached.
Application Error
An application error has occurred and been logged to the GUI log.
Return to the default screen.
Thanks
Varadarajan.R

I just reviewed those logs. I'd recommend you open up a TAC case to get this issue investigated. I believe something about your configuration file is corrupted.
Generally, high bit ascii characters do not do very well in the configuration files which could cause this problem. This was another defect I recalled regarding some Time-Based options that caused such behavior.
-Vance

VDS fails to launch provider {CA7DE14F-5BC8-48FD-93DE-A19527B0459E}. Error code: 80072498@0200000C ( Not able to open disk management )

Hi,
This is happening on a Windows Server 2008 R2 SP1 server. When we try to open Disk Management it would stay there with a message " connecting to virtual disk service " and after a while the message changes to " Unable
to connect to Virtual disk service ".
The disk management view stays blank with no drives shown in it. And the following error is registered in System event log -- " VDS fails to launch provider {CA7DE14F-5BC8-48FD-93DE-A19527B0459E}. Error code: 80072498@0200000C "
The VDisk service is set to manual and stopped as it is supposed to be.
An application called " PI System " is installed on the server. We noticed that if we stop the " PI Application services " and reboot the server the disk management opens up fine. Has any one faced this or a similar
situation. Thanks in advance for the help :)

Hi VijayKPV,
Lets start with updating the drivers and confirm you have the latest VDS patch updated from the link.
You cannot cancel a shrink operation on a volume in Windows 7 or in Windows Server 2008 R2
http://support.microsoft.com/kb/2615327
If after install above hotfix the problem still exist I suggest you ask your PI system software vendor for the further help.
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

I am not able to open a PDF file that I just created. I get an access denied message instead.

I am not able to open a PDF file that I just created. I get an access denied message instead.

Thanks for asking.
I was combining different types of files into a single PDF. Some of them were excel spreadsheets and I had set the print areas in each file. When I cleared the print area the problem stopped. So I am assuming that had something to do with it. Though I am not sure.
The strange thing was that I was able to open the excel source documents after creating the faulty PDF but some of the MS word source documents also had "access denied" status. I still cannot figure that part out.

How do I reset Firefox if I am not able to open the application after ending it on the task manager?

We changed the privacy options on firefox, closed the program, and now we are not able to open it. We have ended the process on the task manager, but it still will not open. We tried to uninstall it but it won't even let us do that. I've read lots of articles on how to reset firefox, but it isn't helpful when i can't get into firefox to try it.

See:
*http://kb.mozillazine.org/Browser_will_not_start_up
You can use one of these to start Firefox in <u>Safe mode</u>:
*On Windows, hold down the Shift key while starting Firefox with a double-click on the Firefox desktop shortcut
*On Mac, hold down the Options key while starting Firefox
*Help > Restart with Add-ons Disabled
*https://support.mozilla.org/kb/Safe+Mode
Can you bring up the Profile Manager to create a new profile?
*http://kb.mozillazine.org/Profile_Manager
*https://support.mozilla.org/kb/Managing+profiles

HT4528 On connecting my iphone5 to my windows7 pc I am not able to open the iphone folder from my computers. It says "you dont have permission to access this phone"

On connecting my iphone5 to my windows7 pc I am not able to open the iphone folder from my computers. It says "you dont have permission to access this phone"

I'm not sure what you're asking. Are you writing a program that results in the error when you test it? (This is the developer forum).

TS4009 I am not able to open iCloud from my settings, Sirs says I don't have iCloud installed what has happened?

I am not able to open iCloud from my settings, Sirs says I don't have iCloud installed what has happened? I have an email saying my device can't be backed up because my I cloud is full, and telling me to go to settings to manage it, but my iCloud button is in light grey instead of black and unresponsive.

Go to Settings>General>Restrictions>Accounts (near the bottom) and set this to Allow Changes. You will then be able to access Settings>iCloud again.

Not able to open mail from my mac, gmail repeatedly asking for password. but using same password able to open gmail on safari

not able to open mail from my mac, gmail repeatedly asking for password. but using same password able to open gmail on safari

okay well they got me to take out some .plist files to see if that would help it didn't. I'm not sure what ones that they deleted for my self maybe someone here would be abel to tell you what ones to take out but didn't work the one that came close to working was this going into keychain and deleting the account(s) then reading them again.
if you are to do this please back up first with Time Machine. You can do this with a usb drive.
Okay so go back to where you had internet accounts and make sure mail is shut. click the - on the account your having problems with then quit system preferences.
Okay so then press cmd and space bar at the same time then type 'keychain access' into the search then click on 'keychain access'
once it is open go to the top of the window and put your email address that you are having problems with.
once you have put in your full email, have a look at what comes up i deleted things in the kind colome with 'internet password' and anything with under name that had smtp.gmail.com or imap.gmail.com so it would look like this, map.gmail.com - internet password.
right click and delete them. make sure not to touch any other files that dont say them things on them.
Once you have done this quit keychain access and then restart the computer, once the computer is restarted go back to system preferences and internet accounts and re-add the account.
Hope this helps. if something is not clear just ask.

Not able to open Admin Tool in OBIEE 10.1.3.1 after the installation

Hi Friends,
After installing OBIEE (10.1.3.4.1 in Windows) i am not able to open Admin tool,when i click on the Administration it doesnt respond and i dont see any error message either.i have installed 10.1.3.1 several times before and i never faced this type of issue.I re-installed 4- 5 times and overwritten the existing s/w but still see the same issue.I am able to start the services and default RPD is working fine but not able to open the RPD and also i am able to launch the Catalog Manager.
I searched online but it didn't help me,please share if anyone has faced the similar issue before and found the resolution.

i tried to launch the Admin tool from OracleBI\server\Bin after the installation but its not responding,seems issue with Admin Tool as i am able to launch other applications.

I have used Firefox on my computer for several years. Today, after upgrading to the new version, I was not able to open Firefox. I have tried several times uninstalling and re-downloading Firefox. It still will not open! What is wrong?

I have used Firefox on my computer for several years. Today, after upgrading to the new version, I was not able to open Firefox. I have tried several times uninstalling and re-downloading Firefox. It still will not open! Is the new version not compatible with Windows Vista?

I hope that link points to mozilla.com or mozilla.org
You will have to close firefox.exe with the Windows Task Manager from the "Processes" tab of the WTM since you don't have a widow to close.
The best way to close Firefox is through File > Exit, for those who stuck with the "Firefox" button click on the Firefox button then Exit. It is not perfect but it is a lot better than just closing the window with the "X" in the upper right corner

Not able to open PDF or do any changes even if the PDF opens. Run Time Error is shown every time when trying to open PDF. Please help

Hi,
Not able to open PDF or do any changes even if the PDF opens. Run Time Error is shown every time when trying to open PDF. Please help

Hi Shilpa ,
Please refer to the following link and see if that helps you out.
https://helpx.adobe.com/acrobat/kb/runtime-error-roaming-profile-workflows.html
Are you trying to access the PDF with Acrobat or Adobe Reader?
Regards
Sukrit Dhingra

Not able to open FCS console

Dear All
I have one Forefront Client Security server which exist on Storage, before 3 days Storage was goen down and when it ups we are not able to open FCS/MOM console and getting errors given below
plesae help>>
Event Type: Warning
Event Source: SQLAgent$FCSDB
Event Category: (3)
Event ID: 208
Date:  2/6/2014
Time:  12:10:00 PM
User:  N/A
Computer: COMV-FCS-GGN
Description:
The description for Event ID ( 208 ) in Source ( SQLAgent$FCSDB ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag
to retrieve this description; see Help and Support for details. The following information is part of the event: OnePoint - TodayStatisticsUpdateComputersAndAlerts, 0xB315BE3B7359194DA14F3B22838F57EA, Failed, 2014-02-06 12:10:00, The job failed. The Job
was invoked by Schedule 20 (TodayStatisticsUpdateComputersAndAlerts Schedule). The last step to run was step 2 (Update Alerts)..
Event Type: Error
Event Source: Microsoft Operations Manager
Event Category: (1)
Event ID: 21213
Date:  2/6/2014
Time:  12:34:07 PM
User:  NT AUTHORITY\NETWORK SERVICE
Computer: COMV-FCS-GGN
Description:
The description for Event ID ( 21213 ) in Source ( Microsoft Operations Manager ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the
/AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: 1, IDispatch error #3222.
Event Type: Warning
Event Source: Microsoft Operations Manager
Event Category: None
Event ID: 20607
Date:  2/6/2014
Time:  12:32:24 PM
User:  NT AUTHORITY\NETWORK SERVICE
Computer: COMV-FCS-GGN
Description:
The description for Event ID ( 20607 ) in Source ( Microsoft Operations Manager ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the
/AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: COMV-FCS-GGN, -2147217770, IDispatch error #3222, ConfigurationGetOnePointFreeSpace, d:\bt\4\private\product\core\engine\managers\perfcountermanager\src\momperfcountermanager.cpp,
984.
Event Type: Error
Event Source: FcsMs
Event Category: None
Event ID: 10002
Date:  2/6/2014
Time:  12:32:05 PM
User:  N/A
Computer: COMV-FCS-GGN
Description:
The description for Event ID ( 10002 ) in Source ( FcsMs ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve
this description; see Help and Support for details. The following information is part of the event: The Management Server Service could not import the updated antimalware definition. The component reporting the error returned the following details:
Cannot open database "OnePoint" requested by the login. The login failed.
Details
Error number: 4060
Severity level: 11
State: 1
Server: COMV-FCS-GGN\FCSDB
Procedure:
Line: 1
Result code: 0x80004005
Connection string:
Provider=SQLOLEDB.1;Integrated Security=SSPI;Persist Security Info=False;Initial Catalog=OnePoint;Data Source=COMV-FCS-GGN\FCSDB;Use Procedure for Prepare=1;Auto Translate=True;Packet Size=4096;Workstation ID=COMV-FCS-GGN;Use Encryption for Data=False;Tag with
column collation when possible=False.
Event Type: Error
Event Source: DataTransformationServices
Event Category: None
Event ID: 81
Date:  2/6/2014
Time:  12:16:19 PM
User:  N/A
Computer: COMV-FCS-GGN
Description:
The description for Event ID ( 81 ) in Source ( DataTransformationServices ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE=
flag to retrieve this description; see Help and Support for details. The following information is part of the event:
Error Source: Microsoft Data Transformation Services (DTS) Package
Error Description:Package failed because Step 'DTSStep_DTSTransferObjectsTask_1' failed.
Error code: 80040428
\Error Help File:sqldts80.hlp
Error Help Context ID:0
Package Name: Microsoft Forefront Client Security
Package Description: Microsoft Forefront Client Security DTS
Package ID: {4589F8C7-17D3-4A87-BB5B-0DBF47B6D00A}
Package Version: {B02AC71F-35F8-45BA-ABA9-2EBFA5F33F62}
Package Execution Lineage: {00A27827-0F39-4D31-BDED-AA77A00ACF12}
Executed On: COMV-FCS-GGN
Executed By: SYSTEM
Execution Started: 2/6/2014 12:16:02 PM
Execution Completed: 2/6/2014 12:16:19 PM
Total Execution Time: 16.969 seconds
Package Steps execution information:
Step 'DTSStep_DTSTransferObjectsTask_1' failed
Step Error Source: Microsoft SQL-DMO (ODBC SQLState: 01000)
Step Error Description:[Microsoft][ODBC SQL Server Driver][SQL Server]Database 'OnePoint' cannot be opened. It has been marked SUSPECT by recovery. See the SQL Server errorlog for more information.
Step Error code: 8004039E
Step Error Help File:SQLDMO80.hlp
Step Error Help Context ID:1131
Step Execution Started: 2/6/2014 12:16:18 PM
Step Execution Completed: 2/6/2014 12:16:19 PM
Total Step Execution Time: 0.547 seconds
Progress count in Step: 0
Step 'DTSStep_DTSTransferObjectsTask_3' was not executed
Step 'DTSStep_DTSExecuteSQLTask_1' was not executed
Step 'DTSStep_DTSDynamicPropertiesTask_1' succeeded
Step Execution Started: 2/6/2014 12:16:18 PM
Step Execution Completed: 2/6/2014 12:16:18 PM
Total Step Execution Time: 0.015 seconds
Progress count in Step: 0
Step 'DTSStep_DTSExecuteSQLTask_2' succeeded
Step Execution Started: 2/6/2014 12:16:18 PM
Step Execution Completed: 2/6/2014 12:16:18 PM
Total Step Execution Time: 0.063 seconds
Progress count in Step: 0
Step 'DTSStep_DTSExecuteSQLTask_3' was not executed.
===========================
Event Type: Error
Event Source: SQL Server Report Service
Event Category: None
Event ID: 0
Date:  2/5/2014
Time:  12:34:44 PM
User:  N/A
Computer: COMV-FCS-GGN
Description:
Service cannot be started. Microsoft.ReportingServices.Diagnostics.Utilities.EventLogSourceNotFound: The event source "Schedule and Delivery Processor" does not exist.
   at Microsoft.ReportingServices.Diagnostics.Utilities.RSEventLog.Init()
   at Microsoft.ReportingServices.Diagnostics.Globals.Init(RSConfigurationManager configManager, RunningApplication app, Boolean resetAllPerfCounters)
   at Microsoft.ReportingServices.Diagnostics.Globals.Init(RSConfigurationManager configManager, RunningApplication app)
   at Microsoft.ReportingServices.Library.ServiceAppDomainController.Start(Boolean firstTime)
   at Microsoft.ReportingServices.NTService.ReportService.OnStart(String[] args)
   at System.ServiceProcess.ServiceBase.ServiceQueuedMainCallback(Object state)
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.

Hi,
Based on my research, this event ID 81 occurs if the account that the SQL Server agent runs as on the server with the Reporting database does not have permissions to
the collection database on the other server. This most frequently happens if the SQL Server agent is running as Local System.
If you are using an existing SQL Server computer for Client Security, you may not have the SQL Server Agent service using a domain user account.
For Client Security to work correctly, you must give permissions for the account under which the SQL Server Agent service runs on the reporting database to the collection database on the
management, collection, and reporting servers.
In addition, the event ID 10002 is usually due to the installation of Client Security not being fully configured.
Best regards,
Susie

Not able to open Enterprise dba console in 10g after changing the system ip

Hi Guys,
I have installed 10g database on windows 2003 server.
I was able to open the Enterprise manager DB console(EM) after installation. But I changed the IP address of the system and now I m not able to open the Enterprise manager.
Any help will be much appriciated in this regard.
With Regards
Ansh
Message was edited by:
AnshTyagi
Message was edited by:
AnshTyagi

Configure EM manually
emca -repos drop
emca -repos create
emca -config dbcontrol db
emctl start dbconsole
emctl status dbconsole
- Virag Sharma
http://virag.sharma.googlepages.com
http://viragsharma.blogspot.com/

TS3988 I am not able to open the settings icon from my old iPAD. When I try to select the settings icon it looks like it's about to launch and open however; it will not stay open. I am trying to transfer all my data from my old iPAD to my new 4th gen iPAD

I am not able to open the settings icon from my old iPAD. When I try to select the settings icon it looks like it's about to launch and open however; it will not stay open. I am trying to transfer all my data from my old iPAD to my new 4th gen iPAD.

Try a soft reset - press the home and power bottons and keep them pressed until the Apple logo comes on. Then see if you can access Settings.

Not able to open Access Manager

Similar Messages

Maybe you are looking for