Not able to open another session in source sys when i log in from BW to sys
hello friends ,
I am not having the source sys access , but I took it from one of my collouege . when i login into source sys via BW - RSA ( like source sys and custmizing extractor ) , I am getting log in screen , where i am giving the my collegue;s usr id and password . ( i do not have the sys details , like it is not in my log on pad and i do not my own id ) .
I am directly in SBIW transaction screen ..but when i wanted to open a new session i m not able to do so .
please let me know how to do ? is there any specific setting .
Regards,
manoj
Hi Jain,
Please check the server details and the connection IP address.
Regards,
Lakshman.G
Similar Messages
-
Not able to open Logic8 sessions after upgrade from 10.5.8 to 10.6.8
Hello,
I recently upgraded my 2x2.93 GHz Quad-Core system from 10.5.8 to 10.6.8, and now i'm not able to open certain logic 8 sessions. Most of my sessions open fine, but theres a bunch that I'm getting memory errors for, saying things like "not enough memory" or "audio units failed to load" or the session will load with just a blank screen.
Since I'm running in 32 bit, and I know these particular sessions were (in 10.5.8) using around 2.21 gigs of real mem its pretty clear that i'm pushing the limits of my computer. However it would stand to reason that if i could open the session in leopard, I should be able to open the session in snow leopard.
Strangely enough, I have a mobile rig (2.3 GHz Intel Core i7 macbook pro running on 10.6.8) that will open up these "troubling" sessions just fine. The only thing i can think of thats different is the lap top was a clean OS install while the 8 core was an archive install.
Also strangely enough, I'm able to load sessions larger than 2.21 on my 10.6 8 core as long as its not from the "troubled" bunch of sessions. Which leads me to believe it could possibly be a specific instrument or plug-in or combination that is causing these crashes. Not quite sure how to test for that. Also since the sessions load on the laptop, not sure why it would be an issue on my mac pro.
If i go into the "troubling" sessions by not lunching the "core audio" driver, and delete some instruments i'm not using my sessions will open just fine on my mac pro. While this is a temporary work around, its not work for me in the long run.
Also, none my virtual memory servers have changed since my update so I don't think thats the problem.
If anyone has any idea they could through my way I would greatly appreciate it. I'm definitely stumped on this one.Syed,
This could be the issue. Please follow the steps in the following thread to change the status of this product from shared to installed and check then.
R12-Please let me know how to change the product status
R12-Please let me know how to change the product status
Regards,
Hussein -
Not Able To Open Forms Session After Developer 6i patch
Hi,
Our enviroment is
Db version --> 9.2.0.6
EBS version --> 11.5.10.2
We are upgrading our db to 10gr2.As a prerequisite developer 6i patch (patch 19) has been applied.
After this patch, some forms could not be opened .No error or anything observed in logs.
After some investigation, when the responsibility key updated into new value the forms have been opened succesfully.
Update -->
update fnd_responsibility set responsibility_key='SYSTEM_ADMINISTRATOR_N'
where responsibility_key='SYSTEM_ADMINISTRATOR';
But this update caused concurrent managers not open.Because of this error -->
Routine AFPCSQ cannot set profile option value for USER_ID. ORACLE
error 1403 in get_responsibility_data
Cause: get_responsibility_data
failed due to ORA-01403: no data found.
error.
select application_id,responsibility_id,responsibility_key, end_date
from fnd_responsibility
where responsibility_key like 'SYSTEM_ADMINISTRATOR'
returned no data.
SYSTEM_ADMINISTRATOR responsibility may be special case.By applying this update
to other responsibility solves the problem.But this behaviour is true or not ?
We couldn't find any solution.
Thanks for advices.Hi,
I believe this approach is not correct since you should not update this table manually. For the CM error, it is expected to get this error as the select statement no longer returns "SYSTEM_ADMINISTRATOR" after the update.
I suggest you obtain the FRD log file and see if errors are logged there when trying to reproduce the issue.
Note: 150168.1 - Obtaining Forms Runtime Diagnostics (FRD) In Oracle Applications 11i
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=150168.1
I would also suggest you enable debug on Jinitiator and see if it generates any errors.
Regards,
Hussein -
I am not able to open my account in icloud
i am not able to open my account in icloud
What happens when you try to access your account ? If you are doing it on your iPhone then you are trying to log into Settings > iCloud, not http://icloud.com via Safari (you can't access it on Safari on an iOS device) ?
-
Urgent:: Not able to open/lauch forms session
Hi All,
I had cloned our production instance to create a new instance.
But now I'm not able to open the form session. We are having apps 11.5.10.2.
The dbc file is perfect.. I even checked ICX parameters & related profile values.. seems to be ok..
I can login through /dev60cgi/f60cgi. But can not lauch forms from personal home page.
Can anyone plz suggect wht might be wrong?
Regards..
Edited by: user10200748 on Aug 30, 2008 10:25 PMHi Kali,
Thanks for the response.
I'm not getting any sort of error.. It just dont proceed after clicking the menus.. Even I try to check the error from java console, but even no errors are listed in it..
Moreover , I m getting successful AOLjtest run on the cloned instance.
The inputs I can give is -
The error_log shows -
[Sun Aug 31 07:19:54 2008] [error] [client 160.95.202.46] client denied by server configuration: /fh02/BON/oraapps/common/java/java
[Sun Aug 31 22:22:13 2008] [error] [client 160.95.202.46] client denied by server configuration: proxy:http://severname:8212/pls/BON/f
nd_icx_launch.launch
~
The access_log shows -
160.95.202.46 - - [31/Aug/2008:22:22:11 -0500] "GET /OA_HTML/RF.jsp?function_id=271&resp_id=20456&resp_appl_id=160&security_group_id=0&lang_code=US&oas=NvqKw
EsSQW1RppGR5XrWdw..&formsLink=yes HTTP/1.1" 302 376
lb57gpb1.ced.corp.cummins.com - - [31/Aug/2008:22:22:13 -0500] "GET /pls/BON/fnd_icx_launch.launch?resp_app=ALR&resp_key=ALERT_MANAGER&secgrp_key=STANDARD&s
tart_func=ALR_ALRALERT&other_params= HTTP/1.1" 403 240
~
Regards,
Edited by: user10200748 on Aug 31, 2008 8:36 PM -
If I download a .mov file from gmail, I am not able to open the file. I reinstalled QuickTime 7.6.6, still unable to open the file. If I download the same file from another mail server I have no trouble. What is gmail doing to my file?
Also i have reinstalled the reader9 two times and tried with reader8 also but in both the cases same problem.
it would be gr8 help if someone can help. -
I am not able to open your answer for some reason my computer is not opening it in Explorer, it’s not responding and I keep getting error messages and I don’t know how to open it in another browser when Explorer experiencing issues.
HeatherIf you have IE version 10 go to TOOLS and change the option to use Compatibility View
-
When I download certain files(most often exe files), I'm not able to open the source folder anymore when the download is complete. Neither can I execute the exe file. It often forces me to redownload the file in google chrome and then I go to the source folder and right click properties and I have to unblock the file. Only then I'm able to start the exe file.
FYI: I use vista, so that might be the problem by itself...It is possible that your anti-virus software is corrupting the downloaded files or otherwise interfering with downloading files by Firefox.
Try to disable the real-time (live) scanning of files in your anti-virus software temporarily to see if that makes downloading work.
See "Disable virus scanning in Firefox preferences - Windows"
*http://kb.mozillazine.org/Unable_to_save_or_download_files -
1st-I was able to log into my account but was not able to open any applications, tried another account and same thing. was able to log out and restart but now am unable to use mouse. g5 dual core, can't remember the os without seeing it.
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
Let us know how far you get, or results. -
In my macbook pro I'm not able to open aap store
few days ago I'm install 1 aap is clean my mac and when run that time some file are deleted and problem is created I'm not able to open quick time player as well as priview, app store...
I'm install 1 aap is clean my mac
The first thing you need to do is remove that software according to the developer's instructions. Never install it, or anything like it, again. Then see below.
If you don't already have a current backup, back up all data, then reinstall the OS.* You don't need to erase the startup volume, and you won't need the backup unless something goes wrong. If the system was upgraded from an older version of OS X, you may need the Apple ID and password you used.
If you use FileVault 2, then before running the Installer you must launch Disk Utility and select the icon of the FileVault startup volume ("Macintosh HD," unless you gave it a different name.) It will be nested below another icon with the same name. Click the Unlock button in the toolbar and enter your login password when prompted. Then quit Disk Utility to be returned to the main Recovery screen.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
If you installed the Java runtime distributed by Apple and still need it, you'll have to reinstall it. The same goes for Xcode. All other data will be preserved.
*The linked support article refers to OS X 10.9 ("Mavericks"), but the procedure is the same for OS X 10.7 ("Lion") and later. -
Not able to open MS Excel attachment in the email Using SO_NEW_DOCUMENT_ATT
Hi, I am not able to open the attached MS excel in the mail its giving error as "Problems came up in the following areas during load Table". My requirement is to send a colored excel as attachment through mail when the program is executed in background. For this i have reffered the following link " http://wiki.sdn.sap.com/wiki/display/Snippets/FormattedExcelasEmailAttachment". That is i have used the XML method for this . I would be thankful if you can let me know where i am doing the mistake For refference i am pasting my code: * Send mail when executed in background mode IF sy-batch eq 'X'. PERFORM send_mail_bkgrnd. ELSE. " Foreground mode PERFORM build_layout. PERFORM build_field_cat. PERFORM display. ENDIF. FORM SEND_MAIL_BKGRND . PERFORM process_xml_data. PERFORM disatch_mail. ENDFORM. " SEND_MAIL_BKGRND &---- *& Form PROCESS_XML_DATA &---- FORM PROCESS_XML_DATA . DATA lv_xlwidth TYPE i. * Creating a ixml Factory l_ixml = cl_ixml=>create( ). * Creating the DOM Object Model l_document = l_ixml->create_document( ). * Create Root Node 'Workbook' l_element_root = l_document->create_simple_element( name = 'Workbook' parent = l_document ). l_element_root->set_attribute( name = 'xmlns' value = 'urn:schemas-microsoft-com:office:spreadsheet' ). ns_attribute = l_document->create_namespace_decl( name = 'ss' prefix = 'xmlns' uri = 'urn:schemas-microsoft-com:office:spreadsheet' ). l_element_root->set_attribute_node( ns_attribute ). ns_attribute = l_document->create_namespace_decl( name = 'x' prefix = 'xmlns' uri = 'urn:schemas-microsoft-com:office:excel' ). l_element_root->set_attribute_node( ns_attribute ). * Create node for document properties. r_element_properties = l_document->create_simple_element( name = 'TEST_REPORT' parent = l_element_root ). l_value = sy-uname. l_document->create_simple_element( name = 'Author' value = l_value parent = r_element_properties ). * Styles r_styles = l_document->create_simple_element( name = 'Styles' parent = l_element_root ). * Style for Header r_style = l_document->create_simple_element( name = 'Style' parent = r_styles ). r_style->set_attribute_ns( name = 'ID' prefix = 'ss' value = 'Header' ). r_format = l_document->create_simple_element( name = 'Font' parent = r_style ). r_format->set_attribute_ns( name = 'Bold' prefix = 'ss' value = '1' ). r_format = l_document->create_simple_element( name = 'Interior' parent = r_style ). r_format->set_attribute_ns( name = 'Color' prefix = 'ss' value = '#92D050' ). r_format->set_attribute_ns( name = 'Pattern' prefix = 'ss' value = 'Solid' ). r_format = l_document->create_simple_element( name = 'Alignment' parent = r_style ). r_format->set_attribute_ns( name = 'Vertical' prefix = 'ss' value = 'Center' ). r_format->set_attribute_ns( name = 'WrapText' prefix = 'ss' value = '1' ). r_border = l_document->create_simple_element( name = 'Borders' parent = r_style ). r_format = l_document->create_simple_element( name = 'Border' parent = r_border ). r_format->set_attribute_ns( name = 'Position' prefix = 'ss' value = 'Bottom' ). r_format->set_attribute_ns( name = 'LineStyle' prefix = 'ss' value = 'Continuous' ). r_format->set_attribute_ns( name = 'Weight' prefix = 'ss' value = '1' ). r_format = l_document->create_simple_element( name = 'Border' parent = r_border ). r_format->set_attribute_ns( name = 'Position' prefix = 'ss' value = 'Left' ). r_format->set_attribute_ns( name = 'LineStyle' prefix = 'ss' value = 'Continuous' ). r_format->set_attribute_ns( name = 'Weight' prefix = 'ss' value = '1' ). r_format = l_document->create_simple_element( name = 'Border' parent = r_border ). r_format->set_attribute_ns( name = 'Position' prefix = 'ss' value = 'Top' ). r_format->set_attribute_ns( name = 'LineStyle' prefix = 'ss' value = 'Continuous' ). r_format->set_attribute_ns( name = 'Weight' prefix = 'ss' value = '1' ). r_format = l_document->create_simple_element( name = 'Border' parent = r_border ). r_format->set_attribute_ns( name = 'Position' prefix = 'ss' value = 'Right' ). r_format->set_attribute_ns( name = 'LineStyle' prefix = 'ss' value = 'Continuous' ). r_format->set_attribute_ns( name = 'Weight' prefix = 'ss' value = '1' ). * Style for Data "Color properties are set over here r_style1 = l_document->create_simple_element( name = 'Style' parent = r_styles ). r_style1->set_attribute_ns( name = 'ID' prefix = 'ss' value = 'Data' ). r_border = l_document->create_simple_element( name = 'Borders' parent = r_style1 ). r_format = l_document->create_simple_element( name = 'Border' parent = r_border ). r_format->set_attribute_ns( name = 'Position' prefix = 'ss' value = 'Bottom' ). r_format->set_attribute_ns( name = 'LineStyle' prefix = 'ss' value = 'Continuous' ). r_format->set_attribute_ns( name = 'Weight' prefix = 'ss' value = '1' ). r_format = l_document->create_simple_element( name = 'Border' parent = r_border ). r_format->set_attribute_ns( name = 'Position' prefix = 'ss' value = 'Left' ). r_format->set_attribute_ns( name = 'LineStyle' prefix = 'ss' value = 'Continuous' ). r_format->set_attribute_ns( name = 'Weight' prefix = 'ss' value = '1' ). r_format = l_document->create_simple_element( name = 'Border' parent = r_border ). r_format->set_attribute_ns( name = 'Position' prefix = 'ss' value = 'Top' ). r_format->set_attribute_ns( name = 'LineStyle' prefix = 'ss' value = 'Continuous' ). r_format->set_attribute_ns( name = 'Weight' prefix = 'ss' value = '1' ). r_format = l_document->create_simple_element( name = 'Border' parent = r_border ). r_format->set_attribute_ns( name = 'Position' prefix = 'ss' value = 'Right' ). r_format->set_attribute_ns( name = 'LineStyle' prefix = 'ss' value = 'Continuous' ). r_format->set_attribute_ns( name = 'Weight' prefix = 'ss' value = '1' ). * Worksheet r_worksheet = l_document->create_simple_element( name = 'Worksheet' parent = l_element_root ). r_worksheet->set_attribute_ns( name = 'Name' prefix = 'ss' value = 'Sheet1' ). * Table r_table = l_document->create_simple_element( name = 'Table' parent = r_worksheet ). r_table->set_attribute_ns( name = 'FullColumns' prefix = 'x' value = '1' ). r_table->set_attribute_ns( name = 'FullRows' prefix = 'x' value = '1' ). * Column Formatting DO 32 TIMES. CASE sy-index. WHEN 1. lv_xlwidth = '300'. WHEN 2. lv_xlwidth = '300'. WHEN OTHERS. lv_xlwidth = '300'. ENDCASE. PERFORM clmn_formatting USING lv_xlwidth. ENDDO. * Blank Row r_row = l_document->create_simple_element( name = 'Row' parent = r_table ). * Column Headers Row r_row = l_document->create_simple_element( name = 'Row' parent = r_table ). r_row->set_attribute_ns( name = 'AutoFitHeight' prefix = 'ss' value = '1' ). * VC. No. r_cell = l_document->create_simple_element( name = 'Cell' parent = r_row ). r_cell->set_attribute_ns( name = 'StyleID' prefix = 'ss' value = 'Header' ). r_data = l_document->create_simple_element( name = 'Data' value = 'VC No.' parent = r_cell ). r_data->set_attribute_ns( name = 'Type' prefix = 'ss' value = 'String' ). * Source r_cell = l_document->create_simple_element( name = 'Cell' parent = r_row ). r_cell->set_attribute_ns( name = 'StyleID' prefix = 'ss' value = 'Header' ). r_data = l_document->create_simple_element( name = 'Data' value = 'Source' parent = r_cell ). r_data->set_attribute_ns( name = 'Type' prefix = 'ss' value = 'String' ). DO 30 TIMES. * * TPLGRP r_cell = l_document->create_simple_element( name = 'Cell' parent = r_row ). r_cell->set_attribute_ns( name = 'StyleID' prefix = 'ss' value = 'Header' ). r_data = l_document->create_simple_element( name = 'Data' value = '' parent = r_cell ). r_data->set_attribute_ns( name = 'Type' prefix = 'ss' value = 'String' ). ENDDO. * Blank Row after Column Headers r_row = l_document->create_simple_element( name = 'Row' parent = r_table ). DO 32 TIMES. r_cell = l_document->create_simple_element( name = 'Cell' parent = r_row ). r_cell->set_attribute_ns( name = 'StyleID' prefix = 'ss' value = 'Data' ). ENDDO. * Data Table CLEAR gs_output. LOOP AT gt_output INTO gs_output. r_row = l_document->create_simple_element( name = 'Row' parent = r_table ). DO 32 TIMES. CASE sy-index. WHEN 1. a_dvalue = gs_output-vc_number. WHEN 2. a_dvalue = gs_output-source. WHEN 3. a_dvalue = gs_output-tplgrp_01. WHEN 4. a_dvalue = gs_output-tplgrp_02. WHEN 5. a_dvalue = gs_output-tplgrp_03. WHEN 6. a_dvalue = gs_output-tplgrp_04. WHEN 7. a_dvalue = gs_output-tplgrp_05. WHEN 8. a_dvalue = gs_output-tplgrp_06. WHEN 9. a_dvalue = gs_output-tplgrp_07. WHEN 10. a_dvalue = gs_output-tplgrp_08. WHEN 11. a_dvalue = gs_output-tplgrp_09. WHEN 12. a_dvalue = gs_output-tplgrp_10. WHEN 13. a_dvalue = gs_output-tplgrp_11. WHEN 14. a_dvalue = gs_output-tplgrp_12. WHEN 15. a_dvalue = gs_output-tplgrp_13. WHEN 16. a_dvalue = gs_output-tplgrp_14. WHEN 17. a_dvalue = gs_output-tplgrp_15. WHEN 18. a_dvalue = gs_output-tplgrp_16. WHEN 19. a_dvalue = gs_output-tplgrp_17. WHEN 20. a_dvalue = gs_output-tplgrp_18. WHEN 21. a_dvalue = gs_output-tplgrp_19. WHEN 22. a_dvalue = gs_output-tplgrp_20. WHEN 23. a_dvalue = gs_output-tplgrp_21. WHEN 24. a_dvalue = gs_output-tplgrp_22. WHEN 25. a_dvalue = gs_output-tplgrp_23. WHEN 26. a_dvalue = gs_output-tplgrp_24. WHEN 27. a_dvalue = gs_output-tplgrp_25. WHEN 28. a_dvalue = gs_output-tplgrp_26. WHEN 29. a_dvalue = gs_output-tplgrp_27. WHEN 30. a_dvalue = gs_output-tplgrp_28. WHEN 31. a_dvalue = gs_output-tplgrp_29. WHEN 32. a_dvalue = gs_output-tplgrp_30. ENDCASE. PERFORM fill_data_val_excel USING a_dvalue. ENDDO. CLEAR gs_output. ENDLOOP. * Creating a Stream Factory l_streamfactory = l_ixml->create_stream_factory( ). * Connect Internal XML Table to Stream Factory l_ostream = l_streamfactory->create_ostream_itable( table = l_xml_table ). * Rendering the Document l_renderer = l_ixml->create_renderer( ostream = l_ostream document = l_document ). l_rc = l_renderer->render( ). * Saving the XML Document l_xml_size = l_ostream->get_num_written_raw( ). ENDFORM. " PROCESS_XML_DATA &---- *& Form DISATCH_MAIL &---- FORM DISATCH_MAIL . DATA: objpack LIKE sopcklsti1 OCCURS 2 WITH HEADER LINE. DATA: objhead LIKE solisti1 OCCURS 1 WITH HEADER LINE. DATA: objbin LIKE solix OCCURS 10 WITH HEADER LINE. DATA: objtxt LIKE solisti1 OCCURS 10 WITH HEADER LINE. DATA: reclist LIKE somlreci1 OCCURS 5 WITH HEADER LINE. DATA: doc_chng LIKE sodocchgi1. DATA: tab_lines LIKE sy-tabix. DATA: l_num(3). DATA: subj_date(10) TYPE c. * Mail Subject data lv_date TYPE d. lv_date = sy-datum. CONCATENATE lv_date6(2) '-' lv_date4(2) '-' lv_date+0(4) INTO subj_date. CONCATENATE 'SAP Application Usage Report ' subj_date INTO doc_chng-obj_descr SEPARATED BY space. * Mail Contents objtxt = 'Dear User,'. APPEND objtxt. CLEAR objtxt. APPEND objtxt. CONCATENATE 'Please find the attached SAP Application Usage Report for ' subj_date INTO objtxt SEPARATED BY space. " Mail Contents APPEND objtxt. CLEAR objtxt. APPEND objtxt. objtxt = 'Thanks & Regards,'. APPEND objtxt. objtxt = 'Himanshu Kanekar'. APPEND objtxt. DESCRIBE TABLE objtxt LINES tab_lines. READ TABLE objtxt INDEX tab_lines. doc_chng-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objtxt ). * Packing List For the E-mail Body objpack-head_start = 1. objpack-head_num = 0. objpack-body_start = 1. objpack-body_num = tab_lines. objpack-doc_type = 'RAW'. APPEND objpack. * Creation of the Document Attachment LOOP AT l_xml_table INTO wa_xml. CLEAR objbin. objbin-line = wa_xml-data. APPEND objbin. ENDLOOP. DESCRIBE TABLE objbin LINES tab_lines. objhead = 'SAP Login Details'. APPEND objhead. * Packing List For the E-mail Attachment objpack-transf_bin = ''."'X'. objpack-head_start = 1. objpack-head_num = 0. objpack-body_start = 1. objpack-body_num = tab_lines. CONCATENATE 'SAP_Login_Details' subj_date INTO objpack-obj_descr SEPARATED BY space. objpack-doc_type = 'XLS'. objpack-doc_size = tab_lines * 255. APPEND objpack. * Target Recipent CLEAR reclist. reclist-receiver = reclist-rec_type = 'U'. APPEND reclist. * Sending the document CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1' EXPORTING document_data = doc_chng put_in_outbox = 'X' commit_work = 'X' TABLES packing_list = objpack object_header = objhead contents_txt = objtxt contents_hex = objbin receivers = reclist EXCEPTIONS too_many_receivers = 1 document_not_sent = 2 operation_no_authorization = 4 OTHERS = 99. ENDFORM. " DISATCH_MAIL
Refer:
http://www.sap-img.com/abap/sending-mail-with-attachment-report-in-background.htm
http://www.saptechies.com/sending-mail-with-attachment-report-in-background/ -
Dear All
I have one Forefront Client Security server which exist on Storage, before 3 days Storage was goen down and when it ups we are not able to open FCS/MOM console and getting errors given below
plesae help>>
Event Type: Warning
Event Source: SQLAgent$FCSDB
Event Category: (3)
Event ID: 208
Date: 2/6/2014
Time: 12:10:00 PM
User: N/A
Computer: COMV-FCS-GGN
Description:
The description for Event ID ( 208 ) in Source ( SQLAgent$FCSDB ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag
to retrieve this description; see Help and Support for details. The following information is part of the event: OnePoint - TodayStatisticsUpdateComputersAndAlerts, 0xB315BE3B7359194DA14F3B22838F57EA, Failed, 2014-02-06 12:10:00, The job failed. The Job
was invoked by Schedule 20 (TodayStatisticsUpdateComputersAndAlerts Schedule). The last step to run was step 2 (Update Alerts)..
Event Type: Error
Event Source: Microsoft Operations Manager
Event Category: (1)
Event ID: 21213
Date: 2/6/2014
Time: 12:34:07 PM
User: NT AUTHORITY\NETWORK SERVICE
Computer: COMV-FCS-GGN
Description:
The description for Event ID ( 21213 ) in Source ( Microsoft Operations Manager ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the
/AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: 1, IDispatch error #3222.
Event Type: Warning
Event Source: Microsoft Operations Manager
Event Category: None
Event ID: 20607
Date: 2/6/2014
Time: 12:32:24 PM
User: NT AUTHORITY\NETWORK SERVICE
Computer: COMV-FCS-GGN
Description:
The description for Event ID ( 20607 ) in Source ( Microsoft Operations Manager ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the
/AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: COMV-FCS-GGN, -2147217770, IDispatch error #3222, ConfigurationGetOnePointFreeSpace, d:\bt\4\private\product\core\engine\managers\perfcountermanager\src\momperfcountermanager.cpp,
984.
Event Type: Error
Event Source: FcsMs
Event Category: None
Event ID: 10002
Date: 2/6/2014
Time: 12:32:05 PM
User: N/A
Computer: COMV-FCS-GGN
Description:
The description for Event ID ( 10002 ) in Source ( FcsMs ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve
this description; see Help and Support for details. The following information is part of the event: The Management Server Service could not import the updated antimalware definition. The component reporting the error returned the following details:
Cannot open database "OnePoint" requested by the login. The login failed.
Details
Error number: 4060
Severity level: 11
State: 1
Server: COMV-FCS-GGN\FCSDB
Procedure:
Line: 1
Result code: 0x80004005
Connection string:
Provider=SQLOLEDB.1;Integrated Security=SSPI;Persist Security Info=False;Initial Catalog=OnePoint;Data Source=COMV-FCS-GGN\FCSDB;Use Procedure for Prepare=1;Auto Translate=True;Packet Size=4096;Workstation ID=COMV-FCS-GGN;Use Encryption for Data=False;Tag with
column collation when possible=False.
Event Type: Error
Event Source: DataTransformationServices
Event Category: None
Event ID: 81
Date: 2/6/2014
Time: 12:16:19 PM
User: N/A
Computer: COMV-FCS-GGN
Description:
The description for Event ID ( 81 ) in Source ( DataTransformationServices ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE=
flag to retrieve this description; see Help and Support for details. The following information is part of the event:
Error Source: Microsoft Data Transformation Services (DTS) Package
Error Description:Package failed because Step 'DTSStep_DTSTransferObjectsTask_1' failed.
Error code: 80040428
\Error Help File:sqldts80.hlp
Error Help Context ID:0
Package Name: Microsoft Forefront Client Security
Package Description: Microsoft Forefront Client Security DTS
Package ID: {4589F8C7-17D3-4A87-BB5B-0DBF47B6D00A}
Package Version: {B02AC71F-35F8-45BA-ABA9-2EBFA5F33F62}
Package Execution Lineage: {00A27827-0F39-4D31-BDED-AA77A00ACF12}
Executed On: COMV-FCS-GGN
Executed By: SYSTEM
Execution Started: 2/6/2014 12:16:02 PM
Execution Completed: 2/6/2014 12:16:19 PM
Total Execution Time: 16.969 seconds
Package Steps execution information:
Step 'DTSStep_DTSTransferObjectsTask_1' failed
Step Error Source: Microsoft SQL-DMO (ODBC SQLState: 01000)
Step Error Description:[Microsoft][ODBC SQL Server Driver][SQL Server]Database 'OnePoint' cannot be opened. It has been marked SUSPECT by recovery. See the SQL Server errorlog for more information.
Step Error code: 8004039E
Step Error Help File:SQLDMO80.hlp
Step Error Help Context ID:1131
Step Execution Started: 2/6/2014 12:16:18 PM
Step Execution Completed: 2/6/2014 12:16:19 PM
Total Step Execution Time: 0.547 seconds
Progress count in Step: 0
Step 'DTSStep_DTSTransferObjectsTask_3' was not executed
Step 'DTSStep_DTSExecuteSQLTask_1' was not executed
Step 'DTSStep_DTSDynamicPropertiesTask_1' succeeded
Step Execution Started: 2/6/2014 12:16:18 PM
Step Execution Completed: 2/6/2014 12:16:18 PM
Total Step Execution Time: 0.015 seconds
Progress count in Step: 0
Step 'DTSStep_DTSExecuteSQLTask_2' succeeded
Step Execution Started: 2/6/2014 12:16:18 PM
Step Execution Completed: 2/6/2014 12:16:18 PM
Total Step Execution Time: 0.063 seconds
Progress count in Step: 0
Step 'DTSStep_DTSExecuteSQLTask_3' was not executed.
===========================
Event Type: Error
Event Source: SQL Server Report Service
Event Category: None
Event ID: 0
Date: 2/5/2014
Time: 12:34:44 PM
User: N/A
Computer: COMV-FCS-GGN
Description:
Service cannot be started. Microsoft.ReportingServices.Diagnostics.Utilities.EventLogSourceNotFound: The event source "Schedule and Delivery Processor" does not exist.
at Microsoft.ReportingServices.Diagnostics.Utilities.RSEventLog.Init()
at Microsoft.ReportingServices.Diagnostics.Globals.Init(RSConfigurationManager configManager, RunningApplication app, Boolean resetAllPerfCounters)
at Microsoft.ReportingServices.Diagnostics.Globals.Init(RSConfigurationManager configManager, RunningApplication app)
at Microsoft.ReportingServices.Library.ServiceAppDomainController.Start(Boolean firstTime)
at Microsoft.ReportingServices.NTService.ReportService.OnStart(String[] args)
at System.ServiceProcess.ServiceBase.ServiceQueuedMainCallback(Object state)
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.Hi,
Based on my research, this event ID 81 occurs if the account that the SQL Server agent runs as on the server with the Reporting database does not have permissions to
the collection database on the other server. This most frequently happens if the SQL Server agent is running as Local System.
If you are using an existing SQL Server computer for Client Security, you may not have the SQL Server Agent service using a domain user account.
For Client Security to work correctly, you must give permissions for the account under which the SQL Server Agent service runs on the reporting database to the collection database on the
management, collection, and reporting servers.
In addition, the event ID 10002 is usually due to the installation of Client Security not being fully configured.
Best regards,
Susie -
Not able to open XMind files from IE in read only mode
I have configured my SharePoint Farm to support .xmind file types
Below are the steps I have done
1.
Added an entry in DOCICON.XML
<Mapping Key="xmind" Value="xmind_file1.png" EditText="XMind Mapping Software" OpenControl="SharePoint.OpenDocuments"/>
2. Added an entry in htmltransinfo.xml
<Mapping Extension="xmind" AcceptHeader="application/vnd.xmind.workbook" HandlerUrl="" ProgId=""/>
3. Added a MiME type 'application/vnd.xmind.workbook' in the Inetmgr.
Now, xmind files are getting detected, but I am not able to open xmind files in read only mode from IE.
Xmind files are working perfectly from Mozilla, but my client wants the xmind to be working perfectly from IE.
Need a help on this issue....Hi Aries,
Please find the screenshot below , while I am trying to open the xmind file in read only mode. It is redirecting the user to a blank page...
Also please find the extract from the fiddler when trying to open it after selecting the read only mode
GET http://myserver/sites/Team_test_8/Documents/file1.xmind HTTP/1.1
Accept: text/html, application/xhtml+xml, */*
Referer:
http://myserver/sites/Team_test_8/Documents/Forms/AllItems.aspx
Accept-Language: en-US
User-Agent: Mozilla/5.0 (compatible; MSIE 9.0; Windows NT 6.1; WOW64; Trident/5.0)
Accept-Encoding: gzip, deflate
Host: myserver
If-Modified-Since: Tue, 22 Apr 2014 06:40:41 GMT
If-None-Match: "{3243523D-B412-4437-A587-FA02D4C3C763},9"
Connection: Keep-Alive
Cookie: WT_FPC=id=125.22.78.82-1203562128.30325182:lv=1398735003583:ss=1398735003583; WSS_KeepSessionAuthenticated={ce7264f1-49e7-4483-9413-eed8c6929dd7}; ASP.NET_SessionId=knrzwvfb03puo1551qwl3lut
Authorization: NTLM TlRMTVNTUAABAAAAB4IIogAAAAAAAAAAAAAAAAAAAAAGAbEdAAAADw==
HTTP/1.1 401 Unauthorized
Server: Microsoft-IIS/7.5
SPRequestGuid: 16c42597-cfa9-4993-a19a-539ae9b5a7ec
WWW-Authenticate: NTLM TlRMTVNTUAACAAAAEAAQADgAAAAFgomiyxgpfwFl18AAAAAAAAAAAKQApABIAAAABgGxHQAAAA9FAFIASQBDAFMAUwBPAE4AAgAQAEUAUgBJAEMAUwBTAE8ATgABABYARQBTAEUAUwBTAE0AVwAyADQAMgA1AAQAFgBlAHIAaQBjAHMAcwBvAG4ALgBzAGUAAwAuAEUAUwBFAFMAUwBNAFcAMgA0ADIANQAuAGUAcgBpAGMAcwBzAG8AbgAuAHMAZQAFABYAZQByAGkAYwBzAHMAbwBuAC4AcwBlAAcACACy5d2OcGPPAQAAAAA=
X-Powered-By: ASP.NET
MicrosoftSharePointTeamServices: 14.0.0.6114
Date: Tue, 29 Apr 2014 06:02:10 GMT
Content-Length: 0
Proxy-Support: Session-Based-Authentication -
Not able to open canon xf 305 mxf in premiere cs6 but opening in cs5....need help....plsss
am not able to open canon xf 305 mxf in premiere cs6 but opening in cs5. I almost completed my project in cs6 and got this 3 gb footage just now.....help me please
Are you using the Media Browser for importing?
Import assets from file-based sources with Media Browser
http://helpx.adobe.com/content/help/en/premiere-pro/using/importing-assets-tapeless-format s.html#import_assets_from_file_based_sources_with_media_browser -
Not able to open Communication Channel Monitoring
Hello All,
I am not able to open communication Channel Monitoring in Runtime workbench under Component Monitoring. When i am click on Communication Channel Monitoring button following error was thrown. Can anybody suggest me, How to resolve this problem.
java.lang.NullPointerException
at com.sapportals.htmlb.table.TableView.getColumns(TableView.java:332)
at com.sapportals.htmlb.table.TableView.getColumn(TableView.java:350)
at com.sap.aii.mdt.amt.channelmonitoring.ChannelListTableView.setTableSortingStuff(ChannelListTableView.java:556)
at com.sap.aii.mdt.amt.channelmonitoring.ChannelListTableView.setSingleSelectTable(ChannelListTableView.java:393)
at jsp_channelmonitoring1213186378553._jspService(jsp_channelmonitoring1213186378553.java:257)
at com.sap.engine.services.servlets_jsp.server.jsp.JspBase.service(JspBase.java:112)
at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:566)
at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:190)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
at com.sapportals.htmlb.page.PageProcessorServlet.handleRequest(PageProcessorServlet.java:68)
at com.sapportals.htmlb.page.PageProcessorServlet.doGet(PageProcessorServlet.java:29)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
Thanks&Regards,
VenkatK.Hi,
The error could be because
1) The URL referenced from RWB (Communictaion Channel) is incorrect.
Try accesing the link directly http://HOST:JAVAPORT/mdt/channelmonitorservlet
If you are able to open the window with out nay error, it means you url referenced from SLD is wrong. Correct your SLD and update the cache.
2) If you are not able to access above URL, it means the java service is not running to accept your request, check in visual admin if any of the services are stopped. Try restarting the same.
Regards,
KNS Kumar
Maybe you are looking for
-
Not Able to Create Vendor Through PRAA
Hi All, I am not able to convert employee into vendor through PRAA program. It seems the background program is not running. So it would be great if any one can tell me exactly step by step how to run this program and how to check its result. Also pls
-
None responsive ipod apple logo comes on then screen goes black
Ive not used ipod for a while .Now it wont charge apple logo comes on then screen goes black
-
Report with data that is present in cube and not in ODS from a multiprovide
Hi Friends, I have a multiprovider with one cube and one ODS. I have a requirement to create a exception report. This exception report should have records that are present in cube but not in ODS. If cube has a record which is present in both infoprov
-
I can't find my user account photo on my hard drive.
I can't find the photo I took of myself with the iSight camera of my iMac, which is used in my user account, on my hard drive. When I go to System Preferences, Accounts, and click on the photo next to Change Password, a drop down window appears. In t
-
Create Alerts using CSOM/REST in O365
Hi, Is there any CSOM/REST API for creating alerts in Office 365 environment? -Thanks Nilesh Jain