Not able to open Enterprise dba console in 10g after changing the system ip
Hi Guys,
I have installed 10g database on windows 2003 server.
I was able to open the Enterprise manager DB console(EM) after installation. But I changed the IP address of the system and now I m not able to open the Enterprise manager.
Any help will be much appriciated in this regard.
With Regards
Ansh
Message was edited by:
AnshTyagi
Message was edited by:
AnshTyagi
Configure EM manually
emca -repos drop
emca -repos create
emca -config dbcontrol db
emctl start dbconsole
emctl status dbconsole
- Virag Sharma
http://virag.sharma.googlepages.com
http://viragsharma.blogspot.com/
Similar Messages
-
i have updated my ipad yestarday sicne then i am not able to open any application on my ipad2. some of the application able to open in the page and not able to open all the applications in the second page. Does any one got this type of issue? any suggestions?
This problem has been reported a few times. The solution is to install any new App say a free one. This seems to fix whatever has gone wrong.
-
I am not able to open iCloud from pc, error is "problem with the server". what should I do?
Go to Settings>General>Restrictions>Accounts (near the bottom) and set this to Allow Changes. You will then be able to access Settings>iCloud again.
-
BEfore updating my iPhone 4S, I could double click the home button and delete all of the previously opened apps. After updating, I am not able to figure out how to do this. Can someone tell me how to do this? Thank you.
After you double click the home button you swipe up on the app screenshot.
-
MDM 7.1 not able to open in MDS console
Hello,
From MDM console, i'm trying to have DBMS Setting of Oracle 10.2.0.4, but it is giving me error as Database not connected, when i checked in logs file, it is giving me "Oracle Initialization Failed -- likely missing libraries/dlls".
"ERROR CODE=-1 ||| Failed to intitialize Oracle shared library"
I did check all the settings and so far it looks good, as my Dev system is working fine.
I'm using MDM 7.1, if anyone came across such issue, please let me know, what can be done to avoid this?
Thanks,
Anand.Hi,
Even we faced a similar issue. We were also on same oracle version.
We found out that the main problem was with the default database created after installation. So our Oracle DBAs, created a similar database manually and deleted the default database and problem got resolved.
Hope this gives you a hint to the way forward.
Regards,
Dheeraj. -
pls help.... with my problem with my iphone
The phone randomly shutting down-that could be a hardware issue. Do you live near an apple store? they could see whats up with the phone. It could very well be something in the software though. A good way to test it would be to follow this article: http://support.apple.com/kb/HT4137 and test it for a few days. If it doesn't do the shutting down thing, you know it's a software issue. If it still does it, you know it's a hardware issue.
As far as deleting the apps, they'll always be there. Just make sure there's not a check mark next to them and they won't sync to your phone =] -
Dear All
I have one Forefront Client Security server which exist on Storage, before 3 days Storage was goen down and when it ups we are not able to open FCS/MOM console and getting errors given below
plesae help>>
Event Type: Warning
Event Source: SQLAgent$FCSDB
Event Category: (3)
Event ID: 208
Date: 2/6/2014
Time: 12:10:00 PM
User: N/A
Computer: COMV-FCS-GGN
Description:
The description for Event ID ( 208 ) in Source ( SQLAgent$FCSDB ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag
to retrieve this description; see Help and Support for details. The following information is part of the event: OnePoint - TodayStatisticsUpdateComputersAndAlerts, 0xB315BE3B7359194DA14F3B22838F57EA, Failed, 2014-02-06 12:10:00, The job failed. The Job
was invoked by Schedule 20 (TodayStatisticsUpdateComputersAndAlerts Schedule). The last step to run was step 2 (Update Alerts)..
Event Type: Error
Event Source: Microsoft Operations Manager
Event Category: (1)
Event ID: 21213
Date: 2/6/2014
Time: 12:34:07 PM
User: NT AUTHORITY\NETWORK SERVICE
Computer: COMV-FCS-GGN
Description:
The description for Event ID ( 21213 ) in Source ( Microsoft Operations Manager ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the
/AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: 1, IDispatch error #3222.
Event Type: Warning
Event Source: Microsoft Operations Manager
Event Category: None
Event ID: 20607
Date: 2/6/2014
Time: 12:32:24 PM
User: NT AUTHORITY\NETWORK SERVICE
Computer: COMV-FCS-GGN
Description:
The description for Event ID ( 20607 ) in Source ( Microsoft Operations Manager ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the
/AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: COMV-FCS-GGN, -2147217770, IDispatch error #3222, ConfigurationGetOnePointFreeSpace, d:\bt\4\private\product\core\engine\managers\perfcountermanager\src\momperfcountermanager.cpp,
984.
Event Type: Error
Event Source: FcsMs
Event Category: None
Event ID: 10002
Date: 2/6/2014
Time: 12:32:05 PM
User: N/A
Computer: COMV-FCS-GGN
Description:
The description for Event ID ( 10002 ) in Source ( FcsMs ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve
this description; see Help and Support for details. The following information is part of the event: The Management Server Service could not import the updated antimalware definition. The component reporting the error returned the following details:
Cannot open database "OnePoint" requested by the login. The login failed.
Details
Error number: 4060
Severity level: 11
State: 1
Server: COMV-FCS-GGN\FCSDB
Procedure:
Line: 1
Result code: 0x80004005
Connection string:
Provider=SQLOLEDB.1;Integrated Security=SSPI;Persist Security Info=False;Initial Catalog=OnePoint;Data Source=COMV-FCS-GGN\FCSDB;Use Procedure for Prepare=1;Auto Translate=True;Packet Size=4096;Workstation ID=COMV-FCS-GGN;Use Encryption for Data=False;Tag with
column collation when possible=False.
Event Type: Error
Event Source: DataTransformationServices
Event Category: None
Event ID: 81
Date: 2/6/2014
Time: 12:16:19 PM
User: N/A
Computer: COMV-FCS-GGN
Description:
The description for Event ID ( 81 ) in Source ( DataTransformationServices ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE=
flag to retrieve this description; see Help and Support for details. The following information is part of the event:
Error Source: Microsoft Data Transformation Services (DTS) Package
Error Description:Package failed because Step 'DTSStep_DTSTransferObjectsTask_1' failed.
Error code: 80040428
\Error Help File:sqldts80.hlp
Error Help Context ID:0
Package Name: Microsoft Forefront Client Security
Package Description: Microsoft Forefront Client Security DTS
Package ID: {4589F8C7-17D3-4A87-BB5B-0DBF47B6D00A}
Package Version: {B02AC71F-35F8-45BA-ABA9-2EBFA5F33F62}
Package Execution Lineage: {00A27827-0F39-4D31-BDED-AA77A00ACF12}
Executed On: COMV-FCS-GGN
Executed By: SYSTEM
Execution Started: 2/6/2014 12:16:02 PM
Execution Completed: 2/6/2014 12:16:19 PM
Total Execution Time: 16.969 seconds
Package Steps execution information:
Step 'DTSStep_DTSTransferObjectsTask_1' failed
Step Error Source: Microsoft SQL-DMO (ODBC SQLState: 01000)
Step Error Description:[Microsoft][ODBC SQL Server Driver][SQL Server]Database 'OnePoint' cannot be opened. It has been marked SUSPECT by recovery. See the SQL Server errorlog for more information.
Step Error code: 8004039E
Step Error Help File:SQLDMO80.hlp
Step Error Help Context ID:1131
Step Execution Started: 2/6/2014 12:16:18 PM
Step Execution Completed: 2/6/2014 12:16:19 PM
Total Step Execution Time: 0.547 seconds
Progress count in Step: 0
Step 'DTSStep_DTSTransferObjectsTask_3' was not executed
Step 'DTSStep_DTSExecuteSQLTask_1' was not executed
Step 'DTSStep_DTSDynamicPropertiesTask_1' succeeded
Step Execution Started: 2/6/2014 12:16:18 PM
Step Execution Completed: 2/6/2014 12:16:18 PM
Total Step Execution Time: 0.015 seconds
Progress count in Step: 0
Step 'DTSStep_DTSExecuteSQLTask_2' succeeded
Step Execution Started: 2/6/2014 12:16:18 PM
Step Execution Completed: 2/6/2014 12:16:18 PM
Total Step Execution Time: 0.063 seconds
Progress count in Step: 0
Step 'DTSStep_DTSExecuteSQLTask_3' was not executed.
===========================
Event Type: Error
Event Source: SQL Server Report Service
Event Category: None
Event ID: 0
Date: 2/5/2014
Time: 12:34:44 PM
User: N/A
Computer: COMV-FCS-GGN
Description:
Service cannot be started. Microsoft.ReportingServices.Diagnostics.Utilities.EventLogSourceNotFound: The event source "Schedule and Delivery Processor" does not exist.
at Microsoft.ReportingServices.Diagnostics.Utilities.RSEventLog.Init()
at Microsoft.ReportingServices.Diagnostics.Globals.Init(RSConfigurationManager configManager, RunningApplication app, Boolean resetAllPerfCounters)
at Microsoft.ReportingServices.Diagnostics.Globals.Init(RSConfigurationManager configManager, RunningApplication app)
at Microsoft.ReportingServices.Library.ServiceAppDomainController.Start(Boolean firstTime)
at Microsoft.ReportingServices.NTService.ReportService.OnStart(String[] args)
at System.ServiceProcess.ServiceBase.ServiceQueuedMainCallback(Object state)
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.Hi,
Based on my research, this event ID 81 occurs if the account that the SQL Server agent runs as on the server with the Reporting database does not have permissions to
the collection database on the other server. This most frequently happens if the SQL Server agent is running as Local System.
If you are using an existing SQL Server computer for Client Security, you may not have the SQL Server Agent service using a domain user account.
For Client Security to work correctly, you must give permissions for the account under which the SQL Server Agent service runs on the reporting database to the collection database on the
management, collection, and reporting servers.
In addition, the event ID 10002 is usually due to the installation of Client Security not being fully configured.
Best regards,
Susie -
Not able to open an older document in version 3.5
Since i have upgraded numbers to version 3.5 i am not able to open an older numbers-document. I get the message to get a newer numbers-version. What´s wrong?
Hi Ma,
You may be trying to open your document in Numbers 2.3. Checkout Wayne's tip Need newer version of Numbers to open file.
quinn -
Not able to open em console!
Hi,
I have created a new domain and started the weblogic server.Its in running mode, but not able to open http://<host>:7001/em
the error is as follows..
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.5 404 Not Found
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
I have checked in weblogic console. there in the "Deployments" tab , em.ear is in failed state.i tried to update(redeploy) it to adminserver, but im getting the following error....
"weblogic.application.ApplicationLifecycleEvent.getDeploymentOperation()Lweblogic/application/DeploymentOperationType; "
Please provide some inputs.stopping and starting em application from AdminConsole-> Deployments did the trick.
Thanks,
Bob -
Not able to open existing process chains in BW development
Hello Experts,
I am not able to open my existing process chains in development, actually I would like to schedule the process chain but I couldnt do that becoz of above reason. While opneing I am getting pop-up message as " Choose a change request with target system/CONSOL/". I reported this issue to Basis but they told it is not an issue at all
I need to resolve this asap.
Thanks in advance,
AndyRoger,
For the time being you can create a transport, but indicate that it shouldn't be transported.
Then you will be able to work with the process chain.
Just be sure to delete the transport so it doesn't get moved to production on accident.
Nick -
Urgent:: Not able to open/lauch forms session
Hi All,
I had cloned our production instance to create a new instance.
But now I'm not able to open the form session. We are having apps 11.5.10.2.
The dbc file is perfect.. I even checked ICX parameters & related profile values.. seems to be ok..
I can login through /dev60cgi/f60cgi. But can not lauch forms from personal home page.
Can anyone plz suggect wht might be wrong?
Regards..
Edited by: user10200748 on Aug 30, 2008 10:25 PMHi Kali,
Thanks for the response.
I'm not getting any sort of error.. It just dont proceed after clicking the menus.. Even I try to check the error from java console, but even no errors are listed in it..
Moreover , I m getting successful AOLjtest run on the cloned instance.
The inputs I can give is -
The error_log shows -
[Sun Aug 31 07:19:54 2008] [error] [client 160.95.202.46] client denied by server configuration: /fh02/BON/oraapps/common/java/java
[Sun Aug 31 22:22:13 2008] [error] [client 160.95.202.46] client denied by server configuration: proxy:http://severname:8212/pls/BON/f
nd_icx_launch.launch
~
The access_log shows -
160.95.202.46 - - [31/Aug/2008:22:22:11 -0500] "GET /OA_HTML/RF.jsp?function_id=271&resp_id=20456&resp_appl_id=160&security_group_id=0&lang_code=US&oas=NvqKw
EsSQW1RppGR5XrWdw..&formsLink=yes HTTP/1.1" 302 376
lb57gpb1.ced.corp.cummins.com - - [31/Aug/2008:22:22:13 -0500] "GET /pls/BON/fnd_icx_launch.launch?resp_app=ALR&resp_key=ALERT_MANAGER&secgrp_key=STANDARD&s
tart_func=ALR_ALRALERT&other_params= HTTP/1.1" 403 240
~
Regards,
Edited by: user10200748 on Aug 31, 2008 8:36 PM -
Not able to open pdf and adobe reader on windows xp sp3.
Hello,
I am not able to open pdf and adobe reader on my windows xp sp3 computer. I have reinstalled adobe reader 11.0.3 twice, but, no luck. I would appreciate if you could help me in resolving this issue. Thanks in advance.
Regards,
VenkataYou can try using this tool to first remove all traces of Reader from your computer:
http://labs.adobe.com/downloads/acrobatcleaner.html
Then, you can download the full offline Reader installer from
http://get.adobe.com/reader/enterprise/
After downloading, restart your computer and run the installer before doing anything else. -
Not able to open Database Configuration Assitance after installing MGT ser
I've install Oracle Grid Control Enterprises manage in sperate machine(MON1) to moniter 3 servers and I've install Oracle Management Service to get connect with MON1 server. After installation i'm not able to open Databaase configuration assitance and net configuration assitance.
Please help on thisI've found the solution for this problem. Follow this step
step 1. Before install management service copy the environment variable value of PATH in a notepad. For this Select MyComputer-> Do right click->click on advance tab->Click Environment Variables>Under System Variables you see a variables called PATH->select and click on Edit button You will get the value of PATH Value.
Step 2. Now you do Management Service installation
Step 3. Again you do the same step as STEP 1(Make sure you should do this).
Step 4. Now you copy the content which you have copy in step 1 and paste it in PATH Variable
Step 5. Now you try to open.
Step 6. Now You restore the content of PATH Variable which you have copy(STEP 3) after installation so the Management Service will work fine -
I am not able to open up Safari!!!!!!!
I am not able to open up Safari, but I think that maybe I have a virus on my computer what is not allowing me to open it up. The Safari icon jumps when I click on it, but thats it. It doesn't open and I really need to use it! I have to use Google Chrome and I absolutely hate it! Please someone help!!!
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting. -
Not able to open Modal Page through a report attribute link
Dear All,
Not able to open Modal Page through a report attribute link, kindly help me...
I am using skill builders modal page plugin ...
Thanks and Regards,
MadonnaHere's what you have to do.
You set up your column link like this:
Link text: whatever you like
Link attributes: onclick="return false;" class="open_modal"
Target: Page in this application
Page: number of the page you want to open in your modal window
You set up your dynamic action like this:
Event: Click
Selection type: jQuery selector
jQuery selector: .open_modal
(notice the dot at the beginning!)
Action: SkillBuilders Modal Page (2.0.0) [Plug-in]
Event Scope: Dynamic
And finally, in your True Action (SkillBuilders Modal Page (2.0.0)), URL Location should be set as Attribute of Triggering Element.
And that's pretty much all it takes.
Hope this helps.
Maybe you are looking for
-
Unable to get LaserJet M175nw to print over network
I have just installed a new LaserJet 100 Pro M175nw printer on my network. However I am unable to get it to print via the network. The printer is connected to a ethernet cable and configured with a static IP address on the network I am using a Window
-
How to Execute or Publish URL using ABAP
Hi, I would like to publish URL (Ex: HTTP://WWW.SDN.SAP.COM ) Using any ABAP Statement. If i execute ABAP Report, it should publish the URL. Please guide me to achive this. Thanks in Advance! Thanks, Nagesh Ganisetti.
-
See the Updates page http://developers.sun.com/prodtech/javatools/jscreator/downloads/updates/index.html for information about the latest hot fix for Java Studio Creator 2. Use the Update Center in the IDE to download and install the fixes.
-
[openoffice] problem
/opt/openoffice/program/soffice.bin: /usr/lib/libstdc++.so.6: version `GLIBCXX_3.4.9' not found (required by /opt/openoffice/program/libbasegfx680li.so) Any idea ? Narcisse
-
Silent Install -- ignore Non Empty Home
Doing a 10g install in Silent mode and wondering how I can get past the Non Empty home message. During the interactive install, you simply say ignore or continue. I cleared all of the files in the $ORACLE_HOME prior to the install, but it creates a l