Not able to open files through any Application in Mavericks

HI, Since upgrading to Mavericks, I am not able to open the files/folders through any applications (Photoshop, Open office) or attach any files in Mail or web sites, as these files/folders appear greyed out. I could access those files either by locating them in the Finder and right click 'Open with' or drag and drop those files on to the Application icon on the dock. I could not even attach screen shots for this query. Thanks for your help.

This occurred only to my login. Apple Support advised me to delete the Finder preference list (
~/Library/Preferences/com.apple.finder.plist) and restart. Since then, it is working fine.

Similar Messages

Have downloaded flip4mac to watch .avi files on quicktime but still not able to access files. Any suggestions? Thanks L

have downloaded flip4mac to watch .avi files on quicktime but still not able to access files. Any suggestions? Thanks L

Flip4Mac plays Windows Media content, not AVI content. The codec needed to play those specific AVI files is most likely part of Perian or VLC but may not exist for Mac OS X.
(97189)

Not able to open files

I use LR 5.4 und PS CC 14.2.1, as well PSE on a W7HP 64bit. I am not able to open any files useing the open command in PSE or PS CC. Nor Raw or Psd. no error message. I reinstalled all apps without any result. does anyone know something about that?

This occurred only to my login. Apple Support advised me to delete the Finder preference list (
~/Library/Preferences/com.apple.finder.plist) and restart. Since then, it is working fine.

Not able to open file...maybe you can help.

Last Saturday I was recording direct to hard drive using Adobe Premiere Elements 9 and my computer shut down. I have a 41GB file saved with a .avi extension but it is not able to be opened in any program yet. From what I understand, in Adobe, once the file is saved to the timeline (which is how I had it set up) it then goes through the process of adding the appropriate data and processing the file. Since the computer shut down, that didn’t happen. When I right click on the "avi" file in Windows and select Properties>Details the only information showing is the File information. None of the other information that is normally there in video section for a video file in Window 7 is there.
I opened the video in "GSpot" (the free app recommended by some in this forum) and clicked on the button at the bottom for “Proposed Codec Solutions and Tests.” I’ve included a couple of screen shots of what appeared in GSpot:
A screen shot showing the results of file that I cannot open
A screen shot for a similar file: the video production that we did after I restarted the computer. I include this for comparison, since this file works fine.
I don’t know enough about video to know what to look for or how it might be possible to correct the first file, but I thought having this information you might be able to point me in a direction or tell me definitively that it’s hopeless and we should move on to re-recording the session.
Thank you in advance for any assistance you may be able to provide.

Thanks for responding.
The shutdown is not the problem. As you'll see from my repsonse to Bill, I went on battery to reduce the noise I was getting in the audio and was expecting to get an alert but I never saw it before the computer went into Hibernate. That is an issue, but if I choose to do that again, i can correct for that by closely monitoring the battery. I'd like to find a way to get rid of the audio noise (crackling sound and low buzz) without unplugging, but my more immediate concern is recovering the 3.5 hour video that is part of a training class that we are offering online.
Any ideas you have about that besides what Bill suggested would be great.
Thanks!

Not able to open Forms in Oracle Applications,after I login

Hello All,
I have Windows 7 and internet explorer 8 in my laptop.
After I connected to VPN, now i'm able to open the Oracle Applications login page.
After I enter, I can see the list of responsibilities.
When clicked to any of the responsibilities, showing to download the JInitiator, and once it is downloaded and installed, still the forms are not opening.
Also checked with FireFox 3.6 Version, same thing happening. Able to download the JInitiator, but after installing, forms are not opening.
Please do let me know the fix for this.
Thanks.

Hi,
I have Windows 7 and internet explorer 8 in my laptop.What is the application release?
Do you meet the minimum requirements in these docs?
Note: 285218.1 - Recommended Browsers for Oracle E-Business Suite 11i (Customer Recommended)
Note: 389422.1 - Recommended Browsers for Oracle E-Business Suite Release 12 (Customer Recommended)
After I connected to VPN, now i'm able to open the Oracle Applications login page.
After I enter, I can see the list of responsibilities.
When clicked to any of the responsibilities, showing to download the JInitiator, and once it is downloaded and installed, still the forms are not opening.Can you reproduce the issue when NOT connected through VPN?
Can you find any errors in the Jinitiator Console Window? If not, you may need to enable trace as per these documents and check then.
Note: 232651.1 - How to Enable Tracing in Jinitiator
Note: 310961.1 - How To Enable The Java Console Jinitiator 1.1.8 and 1.3
Regards,
Hussein

I am not able to use Wifi through any party. My Labtop informs me I need to Network Configurate

I am not able to use Wifi in the outside of my house because my Mac pro informs me i need configuration and i do not know what that means nor do i know how or what to do? Can some one help give me a 101 course and step by step?

>>Duplicate post removed for cross-posting violation of the forum's ToS Verizon Wireless Terms of Service
See Possible fix for some dlink routers with wifi issues <<
Message was edited by: Verizon Moderator

Not able to export files in any format from PP 5.5 new installation.

Hi all.
Hoping someone can help. I just recentlyinstalled a full licensed education version of CS5.5. I was previously running a trial version. I have been trying to export a project, yet everytime I try and export, it crashes at around 2%. I have tried a number of different export formats and have adjusted the codecs to settings that I knew worked in the trial version. It just comes up with an "Unexplained error".
it's driving me nuts as I have to get this file output.
the file I am trying to output is 2 hours and 10 mins long, although I'm pretty sure the length would not cause an issue as it exported fine in the trial version.
has anyone encountered something similar or can anyone please offer a solution or advice.
thank you in advance.

More information needed for someone to help... click these links and provided the requested information
-http://forums.adobe.com/message/4200840
-http://forums.adobe.com/thread/416679
For CS5 and later, the easy way to insure that your video and your project match
See 2nd post for picture of NEW ITEM process http://forums.adobe.com/thread/872666
Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037
What is a CODEC... a Primer http://forums.adobe.com/thread/546811
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037
Report back with the codec details of your file, use the programs below... a screen shot works well to SHOW people what you are doing
For PC http://www.headbands.com/gspot/ or http://mediainfo.sourceforge.net/en
For Mac http://mediainspector.massanti.com/
http://blogs.adobe.com/premiereprotraining/2011/02/red-yellow-and-green-render-bars.html
If you have a red line over the timeline after importing a video and before adding any effects... your project is wrong for your video... read above about codecs
Once you know exactly what it is you are editing, report back with that information... and your project setting, and if there is a red line above the video in the timeline, which indicates a mismatch between video and project
H.264 will NOT work inside an AVI wrapper http://forums.adobe.com/thread/854115
Run as Administrator http://forums.adobe.com/thread/771202
-Set to always "run as" via icon http://forums.adobe.com/thread/969395
Odd Errors http://forums.adobe.com/thread/670174
Long File Names or odd characters cause problems
Read http://forums.adobe.com/thread/588273
And #4 http://forums.adobe.com/thread/666558
And This Message Thread http://forums.adobe.com/thread/665641

Google Chrome doesn't open files with any applications

Hey all,
After downloading stuff, it is desirable to open the files downloaded; however this is made difficult on my Arch system because Chrome doesn't know what to open the files with, nor does it ask.
I'm using SLiM, xmonad, and have a rather minimalistic set up.
Secondary to this, Chrome cannot determine by itself whether it is the default browser application.
I don't know where I could provide this information to Chrome, Can anybody help?
Thanks

have a look here
http://bbs.archlinux.org/viewtopic.php?id=89053

Not able to open PDF file after scanning

I just purchased an HP Envy 4500 , can scan items and save them as pdf files on the computer. Later going into documents I'm not able to open file - get error box stating not able to open document.

Hi there and welcome to the community! I understand you can scan however, you cannot open up the PDF file afterwards. Please let me know which operating system you are running and I will certainly look into this issue for you.Which Windows Operating System am I running?
Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer? In the meantime, try updating Adobe to see if that helps. Have a great day

Not able to open Dataset when adding Encoding Default

Hi Experts,
I have an urgent requirement . I wanted to make one programs Unicode Complaint
I had to change the statement
open dataset gv_string in text mode for output.
to
open dataset gv_string in text mode encoding default for output.
But after this change the sy-subrc is becoming 8 and not able to open the .Can any one please help
Thanks
Arshad

HI,
Maybe there is no authorization for you to write the file onto the app.server.
Check with basis about your authorizations.
Or could be the directory does not exist.
Regards,
Subramanian
Edited by: Subramanian PL on Jun 27, 2008 1:24 AM

Not able to open ichat

I have a MAC Book Pro with 10.4.11.. I am not able to open iChat. The application starts running when I click it, but the ichat window does not open up.. Did anyone face this problem before?

Reinstall iChat and run the Combo Update afterwards as per this FAQ http://discussions.apple.com/thread.jspa?threadID=1486891
10:32 PM Wednesday; July 2, 2008

I am not able to open pdf files from any web through Firefox. Internet explorer opens those pdf files

I am not able to open pdf files from any web when I use FireFox.
I am able to open pdf files when I use internet explorer.

For the settings to check, see the [[opening PDF files within Firefox]] article.

Not able to open XML file in the application server..........

Hi,
I have downloaded a XML file to the application server.....
File is created but i am not able to open the file there....
Plz advice ....how to open it.....
Regards.

Use Notepad. Drag and drop in notepad.
Aman

I have updated my ipad yestarday sicne then i am not able to open any application on my ipad2. some of the application able to open in the page and not able to open all the applications in the second page. Does any one got this type of issue? any sugg?

i have updated my ipad yestarday sicne then i am not able to open any application on my ipad2. some of the application able to open in the page and not able to open all the applications in the second page. Does any one got this type of issue? any suggestions?

This problem has been reported a few times. The solution is to install any new App say a free one. This seems to fix whatever has gone wrong.

I not able to open any links in the emails I receive and get an "Error: No associated application could be found" when I click on it. HELP!! What's going on? This happened after I downloaded Chrome and then

I not able to open any links in the emails I receive and get an "Error: No associated application could be found" when I click on a link. HELP!! What's going on? This happened after I downloaded Chrome and then decided to delete it.

I have Lion and I just came across this link and it took care of the problem.
Jose Antonio Solis
Re: Lion: Delete google chrome completely include user profile?
Try deleting:
~Library/Application Support/Google
and
~Library/Caches/Google/Chrome

Not able to open files through any Application in Mavericks

Similar Messages

Maybe you are looking for