Not able to open RPD online mode

Hi,
Im not able to login to RPD online. Throwing following error,
[nQSError:37001] Couldnot connect to the Oracle BI Server Instance.
    All my services are up and the status are Alive,My biserver is in Running Mode and I am able to open the Answers page too.
    I am able to open the same RPD in Offline mode but not in Online mode.
After some time services are down though.
Can you please help me to resolve this Issue.

I can connect to repository in offline mode (start > All Programs > Oracle Business Intelligence > Administration). However, when I try to connect in online mode I get following error:
[nQSError:37001] Could not connect to BI Server Instance.
After getting this error when I check services I see that Oracle BI Services has stopped.
I restart the service and try to connect in online mode and again I get the same error - [nQSError:37001]...... and see that Oracle BI Server service has stopped.

Similar Messages

  • Not able to open rpd in online mode

    I am not able to open rpd in online mode.
    It just says that it opens in Read Only mode.
    The service is up and running. Still I get this problem.
    When the service is turned off and I try to open the rpd in offline mode too, it gives me the same problem.
    I am facing this issue even when the NQConfig.ini file is pointing to someother rpd.
    This issue is not with all the rpds in my Repository folder but only with few rpds. I have observed these probs with the latest two rpds each time.
    Can someone pls suggest me on this.
    Thanks,
    Swetha

    Yes.. so far the latest 2 rpds are not working.. (last two rpds that I have saved.. the older ones are working fine)

  • Excel sheet is not able to open in edit mode.

    Hi all,
    I have one issue where user is not able to open an excel file in edit mode. 
    User uploaded .XLS file and have MS office 2003 installed on her system.
    I asked her to save it as .xlsx and then upload it again....any idea why she is not able to open in edit mode.

    Hi,
    What did you mean that the user is not able to open an excel file in edit mode?
    Whether he or she can find "Edit in Microsoft Excel" via clicking the right of the name of the file.
    If yes, when he or she clicked it, whether there are some errors occurred.
    Whether other users can open the excel file in edit mode.
    Best Regards,
    Wendy
    Wendy Li
    TechNet Community Support

  • Not able to open XMind files from IE in read only mode

    I have configured my SharePoint Farm to support .xmind file types
    Below are the steps I have done
    1.  
    Added an entry in DOCICON.XML
        <Mapping Key="xmind" Value="xmind_file1.png" EditText="XMind Mapping Software"  OpenControl="SharePoint.OpenDocuments"/>
    2. Added an entry in htmltransinfo.xml
        <Mapping Extension="xmind" AcceptHeader="application/vnd.xmind.workbook" HandlerUrl="" ProgId=""/>
    3. Added a MiME type 'application/vnd.xmind.workbook' in the Inetmgr.
    Now, xmind files are getting detected, but I am not able to open xmind files in read only mode from IE.
    Xmind files are working perfectly from Mozilla, but my client wants the xmind to be working perfectly from IE.
    Need a help on this issue....

    Hi Aries,
       Please find the screenshot below , while I am trying to open the xmind file in read only mode. It is redirecting the user to a blank page...
    Also please find the extract from the fiddler when trying to open it after selecting the read only mode
    GET http://myserver/sites/Team_test_8/Documents/file1.xmind HTTP/1.1
    Accept: text/html, application/xhtml+xml, */*
    Referer:
    http://myserver/sites/Team_test_8/Documents/Forms/AllItems.aspx
    Accept-Language: en-US
    User-Agent: Mozilla/5.0 (compatible; MSIE 9.0; Windows NT 6.1; WOW64; Trident/5.0)
    Accept-Encoding: gzip, deflate
    Host: myserver
    If-Modified-Since: Tue, 22 Apr 2014 06:40:41 GMT
    If-None-Match: "{3243523D-B412-4437-A587-FA02D4C3C763},9"
    Connection: Keep-Alive
    Cookie: WT_FPC=id=125.22.78.82-1203562128.30325182:lv=1398735003583:ss=1398735003583; WSS_KeepSessionAuthenticated={ce7264f1-49e7-4483-9413-eed8c6929dd7}; ASP.NET_SessionId=knrzwvfb03puo1551qwl3lut
    Authorization: NTLM TlRMTVNTUAABAAAAB4IIogAAAAAAAAAAAAAAAAAAAAAGAbEdAAAADw==
    HTTP/1.1 401 Unauthorized
    Server: Microsoft-IIS/7.5
    SPRequestGuid: 16c42597-cfa9-4993-a19a-539ae9b5a7ec
    WWW-Authenticate: NTLM TlRMTVNTUAACAAAAEAAQADgAAAAFgomiyxgpfwFl18AAAAAAAAAAAKQApABIAAAABgGxHQAAAA9FAFIASQBDAFMAUwBPAE4AAgAQAEUAUgBJAEMAUwBTAE8ATgABABYARQBTAEUAUwBTAE0AVwAyADQAMgA1AAQAFgBlAHIAaQBjAHMAcwBvAG4ALgBzAGUAAwAuAEUAUwBFAFMAUwBNAFcAMgA0ADIANQAuAGUAcgBpAGMAcwBzAG8AbgAuAHMAZQAFABYAZQByAGkAYwBzAHMAbwBuAC4AcwBlAAcACACy5d2OcGPPAQAAAAA=
    X-Powered-By: ASP.NET
    MicrosoftSharePointTeamServices: 14.0.0.6114
    Date: Tue, 29 Apr 2014 06:02:10 GMT
    Content-Length: 0
    Proxy-Support: Session-Based-Authentication

  • Not able to open Admin Tool in OBIEE 10.1.3.1 after the installation

    Hi Friends,
    After installing OBIEE (10.1.3.4.1 in Windows) i am not able to open Admin tool,when i click on the Administration it doesnt respond and i dont see any error message either.i have installed 10.1.3.1 several times before and i never faced this type of issue.I re-installed 4- 5 times and overwritten the existing s/w but still see the same issue.I am able to start the services and default RPD is working fine but not able to open the RPD and also i am able to launch the Catalog Manager.
    I searched online but it didn't help me,please share if anyone has faced the similar issue before and found the resolution.

    i tried to launch the Admin tool from OracleBI\server\Bin after the installation but its not responding,seems issue with Admin Tool as i am able to launch other applications.

  • Not able to connect CRM Online to PowerBI

    Not able to connect CRM Online to PowerBI, Please let me know if you have an idea to resolve this issue.
    oops, something went wrong
    Failed to update model parameters
    Activity Id59a2a854-8e34-6636-0679-3d2e245d2241
    Request Id9b7fa606-324e-4ec8-495f-13f91d03bc54
    Error Code400
    TimeWed Mar 18 2015 21:24:18 GMT-0400 (Eastern Daylight Time)
    Version11.0.9165.945
    Cluster URIhttps://wabi-south-east-asia-redirect.analysis.windows.net

    Hi Kiran
    Please chcek the Note 1359600-MDM stopped communicating after upgrading to 7.1.03 from SAP NOTES.
    https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1359600
    SAP Note Description:
    Summary
    Symptom
    MDM components stopped communicating after upgrading to 7.1.03
    Other terms
    TCP ports, Firewall, connection, network, SP03, SP3, 7.1
    Reason and Prerequisites
    Starting from version 7.1.03 the MDM suite is using different TCP ports for its operations. The change was in order to be compliant with the Internet Authority for Numbering Assignment. Port numbers changed as follows:
    Application Old Port # New Port #
    MDS 20005 59950
    MDLS 20008 59650
    MDIS 20009 59750
    MDSS 20010 59850
    If firewalls were configured to allow MDM's communication throughout the landscape, they actually might prevent (depending on their rules table) the communication after an upgrade to MDM suite starting at version 7.1.03 and higher.
    Solution
    Revise the firewall rules such that they will allow the communication according to the changes described above.
    In order to check that the ports are allowed to pass trough the firewall a telnet test could be done like so:
    1) Open a terminal window (on UNIX) or a command window (on Windows) on the same machine which hosts the application which tries to connect, and issue the following command:
    telnet <MDM server host name or IP address> <TCP port to test>
    2) If no error response is received than it means that the TCP port is allowed to go trough.
    3) Repeat steps 1,2 for all the other ports need by the application.
    Thanks
    Sowseel
    Edited by: sowseel pasumarthi on Jan 18, 2011 6:36 AM

  • Not able to open MS Excel attachment in the email Using SO_NEW_DOCUMENT_ATT

    Hi, I am not able to open the attached MS excel in the mail its giving error as "Problems came up in the following areas during load Table". My requirement is to send a colored excel as attachment through mail when the program is executed in background. For this i have reffered the following link " http://wiki.sdn.sap.com/wiki/display/Snippets/FormattedExcelasEmailAttachment". That is i have used the XML method for this . I would be thankful if you can let me know where i am doing the mistake For refference i am pasting my code: * Send mail when executed in background mode IF sy-batch eq 'X'. PERFORM send_mail_bkgrnd. ELSE. " Foreground mode PERFORM build_layout. PERFORM build_field_cat. PERFORM display. ENDIF. FORM SEND_MAIL_BKGRND . PERFORM process_xml_data. PERFORM disatch_mail. ENDFORM. " SEND_MAIL_BKGRND &---- *& Form PROCESS_XML_DATA &---- FORM PROCESS_XML_DATA . DATA lv_xlwidth TYPE i. * Creating a ixml Factory l_ixml = cl_ixml=>create( ). * Creating the DOM Object Model l_document = l_ixml->create_document( ). * Create Root Node 'Workbook' l_element_root = l_document->create_simple_element( name = 'Workbook' parent = l_document ). l_element_root->set_attribute( name = 'xmlns' value = 'urn:schemas-microsoft-com:office:spreadsheet' ). ns_attribute = l_document->create_namespace_decl( name = 'ss' prefix = 'xmlns' uri = 'urn:schemas-microsoft-com:office:spreadsheet' ). l_element_root->set_attribute_node( ns_attribute ). ns_attribute = l_document->create_namespace_decl( name = 'x' prefix = 'xmlns' uri = 'urn:schemas-microsoft-com:office:excel' ). l_element_root->set_attribute_node( ns_attribute ). * Create node for document properties. r_element_properties = l_document->create_simple_element( name = 'TEST_REPORT' parent = l_element_root ). l_value = sy-uname. l_document->create_simple_element( name = 'Author' value = l_value parent = r_element_properties ). * Styles r_styles = l_document->create_simple_element( name = 'Styles' parent = l_element_root ). * Style for Header r_style = l_document->create_simple_element( name = 'Style' parent = r_styles ). r_style->set_attribute_ns( name = 'ID' prefix = 'ss' value = 'Header' ). r_format = l_document->create_simple_element( name = 'Font' parent = r_style ). r_format->set_attribute_ns( name = 'Bold' prefix = 'ss' value = '1' ). r_format = l_document->create_simple_element( name = 'Interior' parent = r_style ). r_format->set_attribute_ns( name = 'Color' prefix = 'ss' value = '#92D050' ). r_format->set_attribute_ns( name = 'Pattern' prefix = 'ss' value = 'Solid' ). r_format = l_document->create_simple_element( name = 'Alignment' parent = r_style ). r_format->set_attribute_ns( name = 'Vertical' prefix = 'ss' value = 'Center' ). r_format->set_attribute_ns( name = 'WrapText' prefix = 'ss' value = '1' ). r_border = l_document->create_simple_element( name = 'Borders' parent = r_style ). r_format = l_document->create_simple_element( name = 'Border' parent = r_border ). r_format->set_attribute_ns( name = 'Position' prefix = 'ss' value = 'Bottom' ). r_format->set_attribute_ns( name = 'LineStyle' prefix = 'ss' value = 'Continuous' ). r_format->set_attribute_ns( name = 'Weight' prefix = 'ss' value = '1' ). r_format = l_document->create_simple_element( name = 'Border' parent = r_border ). r_format->set_attribute_ns( name = 'Position' prefix = 'ss' value = 'Left' ). r_format->set_attribute_ns( name = 'LineStyle' prefix = 'ss' value = 'Continuous' ). r_format->set_attribute_ns( name = 'Weight' prefix = 'ss' value = '1' ). r_format = l_document->create_simple_element( name = 'Border' parent = r_border ). r_format->set_attribute_ns( name = 'Position' prefix = 'ss' value = 'Top' ). r_format->set_attribute_ns( name = 'LineStyle' prefix = 'ss' value = 'Continuous' ). r_format->set_attribute_ns( name = 'Weight' prefix = 'ss' value = '1' ). r_format = l_document->create_simple_element( name = 'Border' parent = r_border ). r_format->set_attribute_ns( name = 'Position' prefix = 'ss' value = 'Right' ). r_format->set_attribute_ns( name = 'LineStyle' prefix = 'ss' value = 'Continuous' ). r_format->set_attribute_ns( name = 'Weight' prefix = 'ss' value = '1' ). * Style for Data "Color properties are set over here r_style1 = l_document->create_simple_element( name = 'Style' parent = r_styles ). r_style1->set_attribute_ns( name = 'ID' prefix = 'ss' value = 'Data' ). r_border = l_document->create_simple_element( name = 'Borders' parent = r_style1 ). r_format = l_document->create_simple_element( name = 'Border' parent = r_border ). r_format->set_attribute_ns( name = 'Position' prefix = 'ss' value = 'Bottom' ). r_format->set_attribute_ns( name = 'LineStyle' prefix = 'ss' value = 'Continuous' ). r_format->set_attribute_ns( name = 'Weight' prefix = 'ss' value = '1' ). r_format = l_document->create_simple_element( name = 'Border' parent = r_border ). r_format->set_attribute_ns( name = 'Position' prefix = 'ss' value = 'Left' ). r_format->set_attribute_ns( name = 'LineStyle' prefix = 'ss' value = 'Continuous' ). r_format->set_attribute_ns( name = 'Weight' prefix = 'ss' value = '1' ). r_format = l_document->create_simple_element( name = 'Border' parent = r_border ). r_format->set_attribute_ns( name = 'Position' prefix = 'ss' value = 'Top' ). r_format->set_attribute_ns( name = 'LineStyle' prefix = 'ss' value = 'Continuous' ). r_format->set_attribute_ns( name = 'Weight' prefix = 'ss' value = '1' ). r_format = l_document->create_simple_element( name = 'Border' parent = r_border ). r_format->set_attribute_ns( name = 'Position' prefix = 'ss' value = 'Right' ). r_format->set_attribute_ns( name = 'LineStyle' prefix = 'ss' value = 'Continuous' ). r_format->set_attribute_ns( name = 'Weight' prefix = 'ss' value = '1' ). * Worksheet r_worksheet = l_document->create_simple_element( name = 'Worksheet' parent = l_element_root ). r_worksheet->set_attribute_ns( name = 'Name' prefix = 'ss' value = 'Sheet1' ). * Table r_table = l_document->create_simple_element( name = 'Table' parent = r_worksheet ). r_table->set_attribute_ns( name = 'FullColumns' prefix = 'x' value = '1' ). r_table->set_attribute_ns( name = 'FullRows' prefix = 'x' value = '1' ). * Column Formatting DO 32 TIMES. CASE sy-index. WHEN 1. lv_xlwidth = '300'. WHEN 2. lv_xlwidth = '300'. WHEN OTHERS. lv_xlwidth = '300'. ENDCASE. PERFORM clmn_formatting USING lv_xlwidth. ENDDO. * Blank Row r_row = l_document->create_simple_element( name = 'Row' parent = r_table ). * Column Headers Row r_row = l_document->create_simple_element( name = 'Row' parent = r_table ). r_row->set_attribute_ns( name = 'AutoFitHeight' prefix = 'ss' value = '1' ). * VC. No. r_cell = l_document->create_simple_element( name = 'Cell' parent = r_row ). r_cell->set_attribute_ns( name = 'StyleID' prefix = 'ss' value = 'Header' ). r_data = l_document->create_simple_element( name = 'Data' value = 'VC No.' parent = r_cell ). r_data->set_attribute_ns( name = 'Type' prefix = 'ss' value = 'String' ). * Source r_cell = l_document->create_simple_element( name = 'Cell' parent = r_row ). r_cell->set_attribute_ns( name = 'StyleID' prefix = 'ss' value = 'Header' ). r_data = l_document->create_simple_element( name = 'Data' value = 'Source' parent = r_cell ). r_data->set_attribute_ns( name = 'Type' prefix = 'ss' value = 'String' ). DO 30 TIMES. * * TPLGRP r_cell = l_document->create_simple_element( name = 'Cell' parent = r_row ). r_cell->set_attribute_ns( name = 'StyleID' prefix = 'ss' value = 'Header' ). r_data = l_document->create_simple_element( name = 'Data' value = '' parent = r_cell ). r_data->set_attribute_ns( name = 'Type' prefix = 'ss' value = 'String' ). ENDDO. * Blank Row after Column Headers r_row = l_document->create_simple_element( name = 'Row' parent = r_table ). DO 32 TIMES. r_cell = l_document->create_simple_element( name = 'Cell' parent = r_row ). r_cell->set_attribute_ns( name = 'StyleID' prefix = 'ss' value = 'Data' ). ENDDO. * Data Table CLEAR gs_output. LOOP AT gt_output INTO gs_output. r_row = l_document->create_simple_element( name = 'Row' parent = r_table ). DO 32 TIMES. CASE sy-index. WHEN 1. a_dvalue = gs_output-vc_number. WHEN 2. a_dvalue = gs_output-source. WHEN 3. a_dvalue = gs_output-tplgrp_01. WHEN 4. a_dvalue = gs_output-tplgrp_02. WHEN 5. a_dvalue = gs_output-tplgrp_03. WHEN 6. a_dvalue = gs_output-tplgrp_04. WHEN 7. a_dvalue = gs_output-tplgrp_05. WHEN 8. a_dvalue = gs_output-tplgrp_06. WHEN 9. a_dvalue = gs_output-tplgrp_07. WHEN 10. a_dvalue = gs_output-tplgrp_08. WHEN 11. a_dvalue = gs_output-tplgrp_09. WHEN 12. a_dvalue = gs_output-tplgrp_10. WHEN 13. a_dvalue = gs_output-tplgrp_11. WHEN 14. a_dvalue = gs_output-tplgrp_12. WHEN 15. a_dvalue = gs_output-tplgrp_13. WHEN 16. a_dvalue = gs_output-tplgrp_14. WHEN 17. a_dvalue = gs_output-tplgrp_15. WHEN 18. a_dvalue = gs_output-tplgrp_16. WHEN 19. a_dvalue = gs_output-tplgrp_17. WHEN 20. a_dvalue = gs_output-tplgrp_18. WHEN 21. a_dvalue = gs_output-tplgrp_19. WHEN 22. a_dvalue = gs_output-tplgrp_20. WHEN 23. a_dvalue = gs_output-tplgrp_21. WHEN 24. a_dvalue = gs_output-tplgrp_22. WHEN 25. a_dvalue = gs_output-tplgrp_23. WHEN 26. a_dvalue = gs_output-tplgrp_24. WHEN 27. a_dvalue = gs_output-tplgrp_25. WHEN 28. a_dvalue = gs_output-tplgrp_26. WHEN 29. a_dvalue = gs_output-tplgrp_27. WHEN 30. a_dvalue = gs_output-tplgrp_28. WHEN 31. a_dvalue = gs_output-tplgrp_29. WHEN 32. a_dvalue = gs_output-tplgrp_30. ENDCASE. PERFORM fill_data_val_excel USING a_dvalue. ENDDO. CLEAR gs_output. ENDLOOP. * Creating a Stream Factory l_streamfactory = l_ixml->create_stream_factory( ). * Connect Internal XML Table to Stream Factory l_ostream = l_streamfactory->create_ostream_itable( table = l_xml_table ). * Rendering the Document l_renderer = l_ixml->create_renderer( ostream = l_ostream document = l_document ). l_rc = l_renderer->render( ). * Saving the XML Document l_xml_size = l_ostream->get_num_written_raw( ). ENDFORM. " PROCESS_XML_DATA &---- *& Form DISATCH_MAIL &---- FORM DISATCH_MAIL . DATA: objpack LIKE sopcklsti1 OCCURS 2 WITH HEADER LINE. DATA: objhead LIKE solisti1 OCCURS 1 WITH HEADER LINE. DATA: objbin LIKE solix OCCURS 10 WITH HEADER LINE. DATA: objtxt LIKE solisti1 OCCURS 10 WITH HEADER LINE. DATA: reclist LIKE somlreci1 OCCURS 5 WITH HEADER LINE. DATA: doc_chng LIKE sodocchgi1. DATA: tab_lines LIKE sy-tabix. DATA: l_num(3). DATA: subj_date(10) TYPE c. * Mail Subject data lv_date TYPE d. lv_date = sy-datum. CONCATENATE lv_date6(2) '-' lv_date4(2) '-' lv_date+0(4) INTO subj_date. CONCATENATE 'SAP Application Usage Report ' subj_date INTO doc_chng-obj_descr SEPARATED BY space. * Mail Contents objtxt = 'Dear User,'. APPEND objtxt. CLEAR objtxt. APPEND objtxt. CONCATENATE 'Please find the attached SAP Application Usage Report for ' subj_date INTO objtxt SEPARATED BY space. " Mail Contents APPEND objtxt. CLEAR objtxt. APPEND objtxt. objtxt = 'Thanks & Regards,'. APPEND objtxt. objtxt = 'Himanshu Kanekar'. APPEND objtxt. DESCRIBE TABLE objtxt LINES tab_lines. READ TABLE objtxt INDEX tab_lines. doc_chng-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objtxt ). * Packing List For the E-mail Body objpack-head_start = 1. objpack-head_num = 0. objpack-body_start = 1. objpack-body_num = tab_lines. objpack-doc_type = 'RAW'. APPEND objpack. * Creation of the Document Attachment LOOP AT l_xml_table INTO wa_xml. CLEAR objbin. objbin-line = wa_xml-data. APPEND objbin. ENDLOOP. DESCRIBE TABLE objbin LINES tab_lines. objhead = 'SAP Login Details'. APPEND objhead. * Packing List For the E-mail Attachment objpack-transf_bin = ''."'X'. objpack-head_start = 1. objpack-head_num = 0. objpack-body_start = 1. objpack-body_num = tab_lines. CONCATENATE 'SAP_Login_Details' subj_date INTO objpack-obj_descr SEPARATED BY space. objpack-doc_type = 'XLS'. objpack-doc_size = tab_lines * 255. APPEND objpack. * Target Recipent CLEAR reclist. reclist-receiver = reclist-rec_type = 'U'. APPEND reclist. * Sending the document CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1' EXPORTING document_data = doc_chng put_in_outbox = 'X' commit_work = 'X' TABLES packing_list = objpack object_header = objhead contents_txt = objtxt contents_hex = objbin receivers = reclist EXCEPTIONS too_many_receivers = 1 document_not_sent = 2 operation_no_authorization = 4 OTHERS = 99. ENDFORM. " DISATCH_MAIL

    Refer:
    http://www.sap-img.com/abap/sending-mail-with-attachment-report-in-background.htm
    http://www.saptechies.com/sending-mail-with-attachment-report-in-background/

  • I'm not able to open PDF files in Adobe Reader XI.

    I recently updated to Adobe Reader XI and now I can't open any of my PDF documents or PDF e-mail attachments.  When I click on a document I now get a window that asks if I want to allow this file to open.  I click yes and get a monstrousity the likes I've never seen.  It blacks out my screen for a couple seconds and then I get a mixture of my desktop, task bar, and a window wanting to know if I want to open this with Protected Mode disabled.  It only fills 3/4 of the screen, the items all all blown-up in size, and are distorted.  In playing with this I have gotten notes that I have an "Incompatable Application" and "Acrobat failed to connect to a DDS Server".  On occasion I will get an Adobe Reader screen that is completely greyed out with no content in it and after a couple of seconds it goes off.  Other times I got the window about Protected Mode and I've clicked on to disable it but that doesn't work either.  I removed Adobe Reader XI and re-installed Adobe Reader X and I still have the same problem which I did not have before.  I 'm running Windows 7 Professional and have McAfee anti-virus, which I have disbled on one occasion during download and that I still had the same problem.  I went to program files to find the End User License Agreement and try to see if I needed to click on 'Accept" but it tells me the file does not exist.  I even tried using System Restore to take me back to before I did the upgrade to Adobe Reader XI and I still have this problem.  I'm at the end of my knowledge level and because these files are needed in my business I'm only able to operate at about 50%. 

    From: Test Screen Name [email protected]
    Sent: Sunday, August 04, 2013 11:32 AM
    To: gunner0490
    Subject: I'm not able to open PDF files in Adobe Reader XI.
    Re: I'm not able to open PDF files in Adobe Reader XI.
    created by Test Screen Name <http://forums.adobe.com/people/TestScreenName>  in Adobe Reader - View the full discussion <http://forums.adobe.com/message/5565198#5565198

  • In the latest version of Firefox, I am not able to open a new tab neither by Ctrl+T nor from the File Tab nor by pressing the '+' sign next to the last tab

    In the latest version of Firefox, I am not able to open a new tab neither by Ctrl+T nor from the File Tab nor by pressing the '+' sign next to the last tab. So the only solution is opening "New window" which is extremely messy. Kindly help me with this issue.

    hello, can you try to replicate this behaviour when you launch firefox in safe mode once? if not, maybe an addon is interfering here...
    [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]

  • Not able to open Database Engine

    Hi all,
    I am facing issue while trying to access the database engine of my SQL Server 2012 instance. It say login faile with error code "18456".
    In order to give user the login rights in to Database We must open the database engine which in my case I am not able to open the database engine. Analysis Services is opening fine.
    Can you please help me how to fix this issue so that I can open the Database Engine and view the contents of the database.
    My 'sa' account is also not enabled so that I can use the SQL authentication and then open it then give the user login right.
    Please help me with this. As I do not think installing the sql server 2012 from scratch is the solution, there must be some way.If the user has issue in accessing the Database Engine.
    Thanks for help.

    Just make sure when you are trying Olaf's link before doing anything please disable SQL Server agent other wise moment you put server is single user mode agent will make a connection and you would not be able to make connection then.
    Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
    My Technet Wiki Article
    MVP

  • Not able to open Dataset when adding Encoding Default

    Hi Experts,
    I have an urgent requirement . I wanted to make one programs Unicode Complaint
    I had to change the statement
      open dataset gv_string in text mode  for output.
    to
      open dataset gv_string in text mode encoding default for output.
    But after this change the sy-subrc is becoming 8 and not able to open the .Can any one please help
    Thanks
    Arshad

    HI,
    Maybe there is no authorization for you to write the file onto the app.server.
    Check with basis about your authorizations.
    Or could be the directory does not exist.
    Regards,
    Subramanian
    Edited by: Subramanian PL on Jun 27, 2008 1:24 AM

  • I am not able to open contacts on iMac osx maverick

    I am not able to open contacts on iMac osx maverick.

    Hmm, have you tried restarting it? if so< try holding down shift while you turn the computer on untill the gray loading bar appears. this is safe mode. When it loads try to run it from there. If it does not open, you have to test it in a new user. If it still does not work there it is a system wide issue and must be reinstalled. *not erase and reinstall*

  • Just to version 7.Like all updates,ad-ons get disabled.The ad-ons that was disabled,where I am not able to open my emails.Why can't FireFox have updates without disabling ad-ons we need to work with?

    Just to version 7.Like all updates,ad-ons get disabled.The ad-ons that was disabled,where I am not able to open my emails.Why can't FireFox have updates without disabling ad-ons we need to work with?

    ''guigs2 [[#answer-672422|said]]''
    <blockquote>
    NoScript stops cookies, please disable this addon/extension as well as make sure that the language en-us is installed.
    # 1) Open up the Firefox Preferences tab. You can do this by typing about:preferences in the URL bar.
    # 2) Click "Content"
    # 3) Next to "Languages", click "Choose"
    # 4) Select "English/United States [en-us]", click "Add"
    # 5) re-open "about:accounts"
    # 6) Click "Get Started"
    </blockquote>
    Thank you for replying. Unfortunately, I already did all of these things. As you can see from the below screenshot, the language is already set. Also, this screenshot was taken in Safe Mode, so NoScript is not enabled. About:accounts still says I need to enable cookies for some reason. So, this solution didn't work....

  • HT5624 I Am not able to open my IPAD - it is asking for a "Pass Code"  what is this?

    I am not able to open my IPAD - it is asking for a "Pass Code"  what is this?

    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • How do I reset Firefox if I am not able to open the application after ending it on the task manager?

    We changed the privacy options on firefox, closed the program, and now we are not able to open it. We have ended the process on the task manager, but it still will not open. We tried to uninstall it but it won't even let us do that. I've read lots of articles on how to reset firefox, but it isn't helpful when i can't get into firefox to try it.

    See:
    *http://kb.mozillazine.org/Browser_will_not_start_up
    You can use one of these to start Firefox in <u>Safe mode</u>:
    *On Windows, hold down the Shift key while starting Firefox with a double-click on the Firefox desktop shortcut
    *On Mac, hold down the Options key while starting Firefox
    *Help > Restart with Add-ons Disabled
    *https://support.mozilla.org/kb/Safe+Mode
    Can you bring up the Profile Manager to create a new profile?
    *http://kb.mozillazine.org/Profile_Manager
    *https://support.mozilla.org/kb/Managing+profiles

Maybe you are looking for