Not able to post in F-02 error message is displaying

hi
when i am trying to post in F-02 i am getting the following error
COMPANY CODE DOES NOT ASSIGNED TO COUNTRY OR COUNTRY TO CALCULATION PROCEDURE
please help me

Hi Saraswati
Go to OY01 & assign your taxprocedure to your country
then post document this will resolve the issue
regards

Similar Messages

HT1338 Not able to down load itunes updates, error message: corrupt file could not be saved

Not able to down load itunes updates, error message: corrupt file could not be saved try again another time. All other update are able to download...... but not Itunes.
Note: My internet service is DSL and very slow (military installation with no other option).

Not able to down load itunes updates, error message: corrupt file could not be saved try again another time. All other update are able to download...... but not Itunes.
Note: My internet service is DSL and very slow (military installation with no other option).

I am trying to install Indesign 2014 but am not able to complete it because an error message (EX11) appeats while extracting

I am trying to install Indesign 2014 but am not able to complete it because an error message (EX11) appears while extracting

Without system info and other details nobody can tell you much. This simply means that you run out of (temporary) disk space, maybe because the drive is really full, maybe because you have insufficient user privileges...
Mylenium

I am not able to download Flash Player--- the error message is Internet Explorer should be closed

I am unable to download Flash Player ===== the error message says that Internet Explorer should be closed---- how would I get to Adobe.com if Internet Explorer is not open?

You download the installer (http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player_ax.exe) and save it to disk, then close all Internet Explorer windows and run the downloaded installer.

Error message getting displayed in testing system not in development system

Hi All,
I am working on BW 3.5 BEx Query Designer.
I have transported my queries to quality system twice as there were few changes in the variables.
now after the second transports, when I execute the queries in quality system I am getting one error message at the top of report output stating "variable name" does not exist.
I am not able to trace out why the error message is getting displayed while query is working fine in quality system.
If it is due to some variable that has been removed or deleted....will it impact on production move?
how to resolve this problem?
Please provide me some inputs.
Thanks,
Rashmi.
Edited by: Rashmi on Aug 6, 2008 1:29 PM

Rashmi,
Once again Create transport request in RSA1 ans while creating it you need to collect the all the query element.
Transport it again into quality and do the testing as per the business requirment
It would help to resolve the issue

Not able to post vendor payment in case of Cash discount received

Hello
We are on SAP ECC 6.0
I'm not able to post an outgoing payment through F-53 T code when cash discount is received from vendor due to early payment before due date.
I get the following error message -
Tax code V0 for country IN has been deleted or incorrectly changed
Message no. FS201
Our tax calculation procedure is TAXINN and we are an indian company in India.
GL account for cash discount received is already defined in OBXU t code for SKE transaction key tax code wise.
V0 tax code is defined through FTXP.
I'm able to display correct cash discount amount and cash discount % when i click on select process open item in F-53 after entering document date; posting date; company code; currency; Bank GL A/c; Amount (Net of discount); value date and Vendor Account.
What am i missing? Why am i not able to post vendor outgoing payment?
Is it possible to post cash discount received to the credit of Stock / Inventory Account as quantity received is not consumed or quantity is lying in inventory?
Thanks.
Vimal

Hello Chintan
I have assigned GL A/c in OBXU t code with and without reference to tax code.
Still, i am not able to post outgoing payment when cash discount is received as i am paying it before due date.
Cannot i take credit of cash discount received to Inventory / Stock Account?
Is cash discount received always posted to non-Inventory / non-stock GL Account?
Thanks.
VS

Not able to post a new topic to Discussions Safari Safari for Mac

Hi, I'm new to Apple Discussions, but not new to posting to forums.
Currently I'm not able to post to Discussions>Safari>Safari for Mac. I can login, view all post threads, create and save a draft, preview the draft, but cannot post the draft to Discussions>Safari>Safari for Mac.
However I am able to post to a different category; Discussions>Mac OS X v10.4 Tiger>Using Mac OS X Tiger. See posting "This is a test. Please do not reply to this post".
When I try to post to Discussions>Safari>Safari for Mac I get pushed to another web link and system message as follows;
http://discussions.info.apple.com/backsoon/discussionstempaway.html
We're sorry, Apple Discussions is temporarily unavailable. We'll be back soon.
Until then, please visit http://www.apple.com/support
Currently when I open the category Discussions>Safari>Safari for Mac, I see an error message that reads;
Error
An error in the system has occured. Please contact the system administrator if the problem persists.
I have searched for a link to "contact the system administrator", but cannot find it.
I get around the Safari for Mac category error message by clicking on 'next' and it then displays the current threads.
Any help would be greatly appreciated. This is a bonus issue I'd like to resolve asap, to get to my original issue with Safari 4.1 crashing.
Thanks to those who can help!

You're Welcome cuzindave!
That's odd. It was OK before but when I checked again it was down and now it's back.
Safari For Mac
"Is there really a system admin to contact?"
Posting here is the correct procedure.
ali b

Not able to post the document

Hi All,
I have a one doubt i am not able to post the document. After the withholding tax setting i am not able to post the document. I am getting the error Account determination not defined for translation SKT in chart of account. Please help me.
Thanks in advance.
Thanks
Srikanth Gajulla

Dear Srikanth,
Error occurred due to payment difference is loss and that should be adjusted with cash discount loss account and assigned the GL account which should be posted here.
use the T-Code - OBXI and the GL account. check the screen shot.
Regards,
PK.

Not able to post Depreciation

Hi FI Gurus
I am not able to post Depn. in T code AFAB for the year 2007. Year 2006 there was no transactions are available and has been closed properly. when i execute the depn i am getting the following error.
"No posting is possible in the fiscal year 2007 specified. The fiscal year specified differs by more than a year from the fiscal year in which the last postings were performed".
Can you pls help on this.
Regards,
MR

Hi MR
Is it that 1st time AFAB is done in SAP, when was your go live date.
Are you able to post any other Asset related documents, if not please
check whether you had done period generation through T code OA84
Please revert back
regards
A Chandrasekaran

Not able to post outgoing excise invoice

hi expert
i am not able to post outgoing excise invoice, its showing error that G/L account is missing (1) and i checked evrywhere
in tax code ,outgoing cenvet clearing account is there ..
can anyone know where i am missing

Hi Sahil,
Check below three reasons .....
1. open form setting on outgoing excise invoice and tick the g/l account and choose it at transaction time.
2. Check cenvat account on warehouse level .
3. Check cenvat account on item group level
4 Check cenvat account in g/L account determination(General tab) .
Regards
Deepak Tyagi

Not able to post MIGO.

Dear All ,
User is not able to post MIGO as an info displays in status bar " this p.o does not contain any item ".
as user had made a p.o in whihc he had given the qty as 1 EA & also Acttt assign. cat is given.pl help that why this error is coming .
sap11

Vendor Confirmations
In procurement, it is quite normal that once a purchaser sends a Purchase Order to Vendor then he needs a response from vendor expecting some of the information as follows:
Receipt of purchase order by vendor
Acceptance of all the terms and conditions mentioned in purchase order by vendor
Expected date of delivery the goods
Expected date of goods dispatched from the vendor end
Transport confirmation and the shipping notification
And many more
So vendor confirmation is nothing but dispatching of this information to the recipient about the status of the purchase order. Once he has received this then there is a requirement of updating the respective purchase order.
This updating helps the planner to plan the materials more precisely because between the purchase order and planned delivery date, more reliable information has become available.
In Standard SAP, the term "confirmation" (short for "vendor confirmation") has been defined as an umbrella term for various types of information provided by a vendor to a customer, including order acknowledgments, loading or transport confirmations and shipping notifications.
For updating this information in PO, the consultant has to make the following setting in SPRO under the node Set up Confirmation Control:
To define confirmation categories, choose External Confirmation Categories or Internal Confirmation Categories
To define confirmation control keys, choose Confirmation Control Keys
To define the confirmation sequence, choose Confirmation Sequence
Once these settings have been done in SPRO, we have to assign the confirmation control key at item level in the purchase order under the tab page Confirmation. If we are not assigning this we may face error while creating inbound delivery on receipt of shipping notification. Apart from this, reference document for goods receipt will also be decided on these settings.
If there are more than one confirmation categories, then for all confirmation categories, consultant can also specify whether they are for information only or whether they are to constitute a basis for goods receiving and materials planning activities.
Hope this will help you in Understanding Confirmations.

Not able to post material

Hi,
I am not able to post material in MB1C.I am getting error,"posting only possible in periods 2002/11 and 2002/10 in company code ZVAN". I have already done,OMS2 and OMS2.

Welcome to this forum. Please make a search in the forum before posting any repeated questions. This question has been answered many times and you will get inputs from there.
thanks
G. Lakshmipathi

Not able to post messages

Hello,
I am not able to post any message from my office PC neither;
1.Using IE in windows xp
2.Using Firefox in windows xp
3.Using Firefox in RHEL 4
When i click on reply button, message windows comes as usually, but when i click on Post Message button, it becomes endless; progress bar seems to increase for 2-3 steps, with no error, while; from other PC in the office; same LAN connection, messages are going to post perfectly. Even this question, i am posting from my office's another PC. Anyone has encountered such a problem/issue, please share with me. I have'nt installed/removed any program. I am able to access other websites normally.
Thanks and Regards
Girish Sharma

Girish Sharma wrote:
Hello,
I am not able to post any message from my office PC neither;
1.Using IE in windows xp
2.Using Firefox in windows xp
3.Using Firefox in RHEL 4
When i click on reply button, message windows comes as usually, but when i click on Post Message button, it becomes endless; progress bar seems to increase for 2-3 steps, with no error, while; from other PC in the office; same LAN connection, messages are going to post perfectly. Even this question, i am posting from my office's another PC. Anyone has encountered such a problem/issue, please share with me. I have'nt installed/removed any program. I am able to access other websites normally.
Thanks and Regards
Girish SharmaHave you solved your problem Girish?

Why am i not able to post anywhere?

I have a general question about blocking access to programs, and the relevant discussion boards have no "Post new topic" button anywhere. I've searched every page and I even see posts from other users, yet I can't find a button anywhere that it is supposed to be.
I even tried going to the Tips board. I found a "new topic" button that I clicked on, and it tells me that I can't post there and asks me to login. When I try to, it says "error" and redirects me to some "helpful" links that don't help me at all.
Am I missing something?

Hi Oh Theatrical One!
You're probably on a Category page, and not a Forum page.
And submitting User Tips is only accessible to Level 2 members and above, so you are not able to post in that Forum.
If you have a question, or suggestion, about using Discussions, from this page Feedback about Discussions, click on Post New Topic.
If you have a Technical question about Apple Hardware, Programs, Services, Technology, Software, Applications, Products, etc, from this page Discussions - Forum Home, select an appropriate Category from one of the thirteen divisions.
For example, under Mac OS X Related Software, choose the Category Mac OS X v10.4 Tiger.
On the page that opens, select a Forum, such as Installation & Setup, or Using Mac OS X Tiger.
Most Category pages, have numerous Forums within them.
But some may have only one, two, or three.
For example the Safari Category page has three choices listed under Forum / Category, but only one is a Forum: Safari Support forum.
And the Apple Remote Desktop Category, has only one Apple Remote Desktop Forum.
On Forum pages, there is an option to Post New Topic.
Click here for all iPod Forums.
Click here for all iTunes Forums.
More info here How Is Discussions Content Organized.
It can be confusing, but explore the different areas, and you will acquire a better understanding of the hierarchy.
ali b

GR based IV tick mark in PO- not able to post MIRO

we are working for a indian client with CIN. most of the PO's which is created in SAP system with all Excise parameters and applicable taxes. further all PO's created with GR based IV check box enabled.
now the issue is, in some of the purchases vendor is not applicable for excise, so there is no excise parameters in the PO, only tax is applicable. for this case we have not maintained vendor excise details in J1ID. but we have maintained material chapter id and CENVAT determination in J1ID. but as i mentioed earlier these PO's also with GR based IV check box enabled.
If the PO is not excisable no Excise capturing and posting is required, for these types of PO's we are following the below steps
1. Creation of PO with GR based IV check box enabled
2. Goods Receipt without excise capturing
3. Invoice verification - MIRO ( here system is not able to post the docuement because of GR based IV tick mark)
waiting for the response

hi,
thanks for the response
problem is MIRO is not posting whenever GR made with GR based IV tick in PO.
i have checked three scenario
scenario1.
1. created PO with GR based IV, but there is no Excise or Tax captured in PO ( means no FV11 created)
2. Created MIGO ( no excise parameter will appear)
3. MIRO done with respect to MIGO
this scenario is fine
Scenario 2 - current scenario
1. Created PO with GR based IV, No excise is captured in PO but Tax (VAT captured with condition type JVRD) is captured ( means no FV11 created for VAT only)
2. Created MIGO ( no excise parameter will appear)
3. while doing MIRO for this scenario system is not able to post the MIRO because of the VAT in PO and GR based IV tick mark.
Scenario 3
1. Created PO without GR based IV, No excise is captured in PO but Tax (VAT captured with condition type JVRD) is captured ( means no FV11 created for VAT only)
2. Created MIGO ( no excise parameter will appear)
3. MIRO system is picking from PO based IV. so, it is allowing to post
need your expert advice on scenario 2 - how to post MIRO

Not able to post in F-02 error message is displaying

Similar Messages

Maybe you are looking for