Not able to post the recurring entry using F.14

Hi
I have created the recurring document using FBD1 and the document is stored in the company code.
Using F.14, tried to post the recurring document but error message displayed "Session SAPF120 was not created"
<removed_by_moderator>
Regards
Hashmathulla
Edited by: Julius Bussche on Dec 2, 2008 5:14 PM

HI All,
Following is the solution of this problem.
Before execution F.14. just visit at FBD3 TCode with your recurring document number.
Click on GOTO-> Recurring entry data.
There you find one field called Next Run on...... please enter this date while running F.14 TCODE.
It will work.
Or else check for the Delete document checkbox on the same popup screen.
Reward if you got your solution.
Thanks
Guneetinder Singh.

Similar Messages

Not able to post the invoice cancel MR8M document

Dear All,
I am not able to cancell the invoice document using MR8M transaction. System is showing the message as "balance not zero, difference between debits & credits"
Invoice document is created in the FY 2006 as a credit memo, and now i want to reverse/ cancel it by using MR8M transaction.
Pl. let me know the possibilities & checks required for cancellation of it.
Regards
Mangesh

hi,
2006 documents cannot be reversed now since the posting period will be closed.
I think there is no solution. the only solution is
If the vendor is live and supplying any material adjust against them.
G.Ganesh Kumar

Not able to post the document

Hi All,
I have a one doubt i am not able to post the document. After the withholding tax setting i am not able to post the document. I am getting the error Account determination not defined for translation SKT in chart of account. Please help me.
Thanks in advance.
Thanks
Srikanth Gajulla

Dear Srikanth,
Error occurred due to payment difference is loss and that should be adjusted with cash discount loss account and assigned the GL account which should be posted here.
use the T-Code - OBXI and the GL account. check the screen shot.
Regards,
PK.

I am not able to shutdown the database by using stopsap

Dear all,
As mentioned in the subject "I am not able to shutdown the database by using stopsap". I am getting the following errors:
exec(): 0509-036 Cannot load program oracle<SID> because of the following errors:
        0509-150   Dependent module libjox9.a(shr.o) could not be loaded.
        0509-022 Cannot load module libjox9.a(shr.o).
        0509-026 System error: A file or directory in the path name does not exist
R3 is terminated correctly by using the command stopsap and also I am able to shutdown the database normally by using the SQL command.
Thanks for your cooperation.
Maher

Thank you Nick for your care.
I will test start/stop manually later; because the system is active and used by the users for testing purpose (not production).
Yes, LIBPATH is the same for both users.
The ownership/permisssion for the both files is
-rwxr-xr-x   1 <SID>adm   sapsys    stopdb
-rwxr-xr-x   1 <SID>adm   sapsys    startdb
I compared with production, it seems ok.
I started DBCheck by using the transaction DB13 and also it failed due to same errors.
Job started
Step 001 started (program RSDBAJOB, variant &0000000000272, user name ****)
No application server found on database host
Execute logical command BRCONNECT On host *******
Parameters: -u / -c -f check
BR801I BRCONNECT 6.20 (113)
exec(): 0509-036 Cannot load program oracle<SID>because of the following errors:
#0509-150   Dependent module libjox9.a(shr.o) could not be loaded.
#0509-022 Cannot load module libjox9.a(shr.o).
#0509-026 System error: A file or directory in the path name does not exist.
BR805I Start of BRCONNECT processing: cdnybrme.chk 2004-08-11 08.27.04
exec(): 0509-036 Cannot load program oracle<SID> because of the following errors:
#0509-150   Dependent module libjox9.a(shr.o) could not be loaded.
#0509-022 Cannot load module libjox9.a(shr.o).
#0509-026 System error: A file or directory in the path name does not exist.
BR280I Time stamp 2004-08-11 08.27.07
BR301E SQL error -12547 at location db_connect-2
ORA-12547: TNS:lost contact
BR310E Connect to database instance <SID> failed
exec(): 0509-036 Cannot load program oracle<SID> because of the following errors:
#0509-150   Dependent module libjox9.a(shr.o) could not be loaded.
#0509-022 Cannot load module libjox9.a(shr.o).
#0509-026 System error: A file or directory in the path name does not exist.
BR280I Time stamp 2004-08-11 08.27.07
BR301E SQL error -12547 at location thr_db_connect-4
ORA-12547: TNS:lost contact
BR310E Connect to database instance <SID> failed
BR806I End of BRCONNECT processing: cdnybrme.chk 2004-08-11 08.27.07
BR280I Time stamp 2004-08-11 08.27.07
BR804I BRCONNECT terminated with errors
External program terminated with exit code 3
BRCONNECT returned error status E
Job finished
Do you think that we need to rebuild the Oracle Software ?
Thank in advance for your cooperation.
Maher.
Message was edited by: Maher M.

MB1C - Sloc 0001, Mov type 561 (not able to post the goods)

When I post inventory for ROH material
using movement type 561 (Tcode:MB1C) with
SLOC 0001, the system errors outs with the following message
"Material XXXX doesnot exist in warehouse 001"
Iam not maintaining warehouse management for ROH materials.
But I am able to post for the same material with Sloc 0002
Its the issue with sloc 0001
System posts the following Message:
Material XXXX does not exist in warehouse 001
    Message no. L9023
Diagnosis
    All the materials that you use within a warehouse number must also be
    defined for this warehouse number. The material you are using is not
    defined.
Procedure
    If you want to use the material within your warehouse number, you must
    create the material in the material segment for that warehouse number.
Is there any workaround, where I need not maintain WHSE management view for ROH
materials but still able to post the goods with Sloc 0001

Csaba/Rajesha:
Thank you for your replies
For the Sloc 0001, like mentioned it is assigned to whse number 001
I tried to remove/delete the whse number 001 for the sloc0001, but its a entry required
field
In order to fullfill the requirement, maintained the same whse number(HMM) that is
being maintained for sloc 0002 {for which I was able to post (Mvt type 561, Tcode MB1C)}
In MB1C Mtype 561 posted with sloc 0001, Now the system posts
"Material XXXX doesnot exist in warehouse HMM" (previously it gave "Material XXXX doesnot exist in warehouse 001")
It does not give the message for Sloc 0002
Any way in this process, I learned some new things
Due points have been assigned

Not able to post the Time for already created timecard

Hi All,
I have a question on OTL, already time is posted for a week say 29-MAY-2010 to 06-JUN-2010 (for 5 working days), now I need to post the time on saturday & sunday too.
I'm using all the mentioned API's given by the oracle. But while processing the API's, it is throwing an error saying 'Time is already posted for this period'.
Time is posted for the week (start date & end date) but not on saturday & sunday.
Can any one help me out of this issue.
Below is the list of API's I'm using.
1.hxc_timestore_deposit.create_timecard_bb - To create the timecard for the period (in this case it is week)
2.hxc_timestore_deposit.create_day_bb - To create the day wise records for the above timecard id.
3.hxc_timestore_deposit.create_detail_bb - To create the detail hours for the above day wise records.
4.hxc_timestore_deposit.execute_deposit_process - To submit the timecard for the approval.
Thanks in advance..
--Raja

Can you share your code you are using for update? It looks like you are treating the update case as create case. Make sure you use the update apis' during timecard update.
--Shiv

I am not able to post the MIRO Document with reference of PO

Hello friends
My user while posting the MIRO document TDS (service tax ) amount not appering in the MIRO screen
But last month it was working fine.
before that i have checked out vendor master in that they given tax code properly.
can any body please give me suggestion on the same
Regards
vamsi
Edited by: asuvamsi on Mar 2, 2010 4:53 PM

Hello friends
Thanks For all my problem was resloved
Solution is
An message has been occuring like withhold tax has been refreshed. it is just an information message not an error message. this message will trigger when the trans. type is non project type activity. No back end process has been disturbed due to this message. it just passing the information to the user.
we changed the trans. type to manufacturing activity and it is working fine.
I hope it ll help in future
Thanks and Regards
vamsi

GR based IV tick mark in PO- not able to post MIRO

we are working for a indian client with CIN. most of the PO's which is created in SAP system with all Excise parameters and applicable taxes. further all PO's created with GR based IV check box enabled.
now the issue is, in some of the purchases vendor is not applicable for excise, so there is no excise parameters in the PO, only tax is applicable. for this case we have not maintained vendor excise details in J1ID. but we have maintained material chapter id and CENVAT determination in J1ID. but as i mentioed earlier these PO's also with GR based IV check box enabled.
If the PO is not excisable no Excise capturing and posting is required, for these types of PO's we are following the below steps
1. Creation of PO with GR based IV check box enabled
2. Goods Receipt without excise capturing
3. Invoice verification - MIRO ( here system is not able to post the docuement because of GR based IV tick mark)
waiting for the response

hi,
thanks for the response
problem is MIRO is not posting whenever GR made with GR based IV tick in PO.
i have checked three scenario
scenario1.
1. created PO with GR based IV, but there is no Excise or Tax captured in PO ( means no FV11 created)
2. Created MIGO ( no excise parameter will appear)
3. MIRO done with respect to MIGO
this scenario is fine
Scenario 2 - current scenario
1. Created PO with GR based IV, No excise is captured in PO but Tax (VAT captured with condition type JVRD) is captured ( means no FV11 created for VAT only)
2. Created MIGO ( no excise parameter will appear)
3. while doing MIRO for this scenario system is not able to post the MIRO because of the VAT in PO and GR based IV tick mark.
Scenario 3
1. Created PO without GR based IV, No excise is captured in PO but Tax (VAT captured with condition type JVRD) is captured ( means no FV11 created for VAT only)
2. Created MIGO ( no excise parameter will appear)
3. MIRO system is picking from PO based IV. so, it is allowing to post
need your expert advice on scenario 2 - how to post MIRO

Not able to get the Alias Name(Member Description) in FR by using Planning

Hi All,
we are using the 11.1.2 version in my project. While i am developing the FR repots by using planning database i am not able to find the Member name in my report, but i am able to see the option. MemberName, Alias and Both. If i check the Alias or both its giving only member name only.
Any ides on this or any post are there prior this .
Thanks in Advance.
Rao

Rao,
Thanks for the info! It is strange that despite having alias name report is populating member name. It is not the first time strange things hapend with FR.
Can you please check if you are connecting to same data source where you see alias name? Can you pull alias name from SmartView?
Venu

Not able to create a universe when using nav. att. 0MATL_TYPE in the query

Dear experts,
A few days ago I posted a message in the BO General Category due to this error and I was adviced to install SP19 in BW (3.5). We've allready installed it but the issue is still arising. I am posting this thread now in this category since maybe the other category was too general and this one a little bit more specified.
The error we are having is the following:
We are having an issue when trying to create a universe over a BEx query which uses navigational attribute 0MATL_TYPE of 0MATERIAL (0MATERIAL__0MATL_TYPE).
No matter where do we insert this nav. attribute in the query (lines, columns, free characteristics...) that we are not able to create the universe. We receive a message when trying to create it such as "error without message"
We have other navigational attributes from several characteristics which are not giving us any problems in universes, just nav attributes 0MATL_TYPE and a Z characteristic (ZMATPR) which is the same as 0MATL_TYPE (it is defined the same way, not related).
We are working with:
BW 3.5 - SP19, BEx 3.x
BOBJ XI 3.0 (without service pack or fix pack)
Does any one have any clue on what could be the reason for this issue??
Thanks in advance for your interest!
Best regards!!!!
Cecilia

Hello Ingo,
First of all thanks for your help, since we are really concerned about this issue.
We have been analysing the file you have talked us about. The thing is that a week and a half ago we had to write an OSS message to SAP concerning another issue, and we were recommended to install note 1260004 which involves editing the registry in order to show SOFA logs, and if we have understood correcty, the file you have given us modifies as well the server registry in order to show sofa logs.
Does the file you have given us includes new information in the SOFA logs, what is the difference between what we have changed with the SAP note and what you have given us?
Nevertheless, we have retrieved two logs from two executions (having navigational attribute 0MATL_TYPE in the query from which we want to create the universe) in case you could help us to interpret the informations given since we are not able to understand it. (You can seen them below my signature.....haven't find a way to attach files....sorry....)
Thank's very much in advance for your help!!!! This is so disconcerting.......
Best regards!
No way , I cannot copy the logs since the message format is destroyed when I copy it..... If you need it please inform me and we will send it to you!
Thanks again for the help!!!
Cecilia
Edited by: Cecilia Guerra on May 11, 2009 1:56 PM
Edited by: Cecilia Guerra on May 11, 2009 2:09 PM

I have just recently brought the blackberry curve 8310 and i am not able to access the internet, MSN etc. I rang my phone company(Crazy Johns) and they saif i cannot use the internet on this phone because they don't sell it anymore and i need a setting fo

I have just recently brought the blackberry curve 8310 and i am not able to access the internet, MSN etc.
I rang my phone company(Crazy Johns) and they saif i cannot use the internet on this phone because they don't sell it anymore and i need a setting for it to work.
Can you please help me with this?
Thanks Matthew.

Hello,
The services you listed in your post will require a data plan which is provisioned by your wireless provider. You may want to contact your wireless provider to see if you have the correct plan.
Cheers,
-FB
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click "Accept as a Solution" for posts that have solved your issue(s)!

Not able to change the password using FNDCPASS

I am not able to change password using FNDCPASS. I am getting follwoing error while executing following command with APPLMGR user ( before that I have source the .env file ) (OS-Linux)
[applmgr@ora11 /]$ FNDCPASS apps/apps 0 Y system/manager SYSTEM APPLSYS WELCOME
Log filename : L2741743.log
Report filename : O2741743.out
APP-FND-01630: Cannot open file L2741743.log for appending
Cause: FDPFOP encountered an error when attempting to open file L2741743.log for appending.
Action: Verify that the filename is correct and that the environment variables controlling that filename are correct.
Action: If the file is opened in read mode, check that the file exists. Check that you have privileges to read the file in the file directory. Contact your system administrator to obtain read privileges.
Action: If the file is opened in write or append mode, check that you have privileges to create and write files in the file directory. Contact your system administrator to obtain create and write privileges.
Can some one pls guide me on this

Duplicate post-
Not able to change the password using FNDCPASS
Please post only once.
Thanks,

Problem Using HTTP Dispatcher -- Could Not able to get the data in JSP

Hi, I am using HTTP Dispatcher to send my events to particular URL which is a JSP page. I am trying to populate the received event through URL and populate to a oracle data base. But could not able to get the data in Oracle database.
Code is :
<h1>JSP Page</h1>
<%
long type = 0;
String tagId = null;
String timeStr = "0";
String deviceName = "";
// Get Event Parameters
// Available Parameters: id, siteName, deviceName, data, time, type, subtype, sourceName, correlationId
try
type = Long.parseLong(request.getParameter("type")); // Get type
tagId = request.getParameter("id"); // Get tagId
timeStr = request.getParameter("time"); // Get time
          deviceName = request.getParameter("deviceName");
catch (Exception e)
out.println( "Error: "+e.getMessage() );
          // Write into DB.
          try {
          if ((tagId == null) || (type != 200) ){
               // Do Nothing
               //return;
          } else {
               OracleDataSource ods = new OracleDataSource();
               String URL = "jdbc:oracle:thin:@//3.235.173.16:1525/vislocal";
               ods.setURL(URL);
               ods.setUser("cus");
               ods.setPassword("cus");
               Connection myConn = ods.getConnection();
               Statement stmt = myConn.createStatement();
               String selectQuery =
                         "SELECT MAX(rfid_raw_reads_id) as max_id FROM "+
                    "cus.rfid_raw_reads ";
               ResultSet rs = stmt.executeQuery(selectQuery);
               String maxId = "1";
               if (rs.next()) {
                    maxId = rs.getString(1);
               String selectMaxTagIDQuery =
                         "SELECT MAX(rfid_raw_reads_id) as max_id FROM "+
                    "cus.rfid_raw_reads WHERE tag_id = '" + tagId + "'" ;
               stmt = myConn.createStatement();
               rs = stmt.executeQuery(selectMaxTagIDQuery);
               String maxTagId = "1";
               if (rs.next()) {
                    maxTagId = rs.getString(1);
               long primaryKey = 1;
               long tagKey = 1;
               try {
                    primaryKey = Long.parseLong(maxId) + 1;
                    tagKey = Long.parseLong(maxTagId) + 1;
               } catch (Exception e) {
               long currentTime = System.currentTimeMillis();
               long updateKey = (tagKey - 1);
               String updateQuery = " UPDATE cus.rfid_raw_reads SET read_end_time = " + currentTime + " WHERE rfid_raw_reads_id = " + updateKey;
               Statement updateStmt = myConn.createStatement();
               updateStmt.execute(updateQuery);
               String query =
                    "INSERT INTO cus.rfid_raw_reads (rfid_raw_reads_id, tag_id,device_name,read_start_time) VALUES ("+ primaryKey + ",'" + tagId + "'," + deviceName + "'," + System.currentTimeMillis() + " )" ;
               Statement insertStmt = myConn.createStatement();
               insertStmt.execute(query);
               myConn.commit();
               myConn.close();
          } catch (Exception e) {
%>
<p>For browser debug:
<%
out.println( "Type="+type+" ID="+tagId +" time="+timeStr );
%>
Kindly suggest where is the problem...
Thanks and regards
Mohammad Nasim Akhtar

HI Prabhat,
Thanx for your reply, I worked out and able to receive the data in oracle database, Actually there was some problem in insert Query. Now I have tested the same... and able to edit the same in the Database.....
But I am facing a new problem, Http Dispatcher in SES console is displaying all the Events generated as well as event in Que but there is no events in the Event Send. I guess it is not able to send the events.....?????
Event statical is showing like this
Events Received: 0 (0.00/sec)
Events Generated: 311 (0.19/sec)
Events Sent: 2 (0.19/sec)
Queued Events: 309 (0.19/sec)
Kindly suggest where is the problem, Is it a JSP problem or OSES end problem.....
Thanks and regards
Nasim

Not able to get the message from Queue using MQ adapter

HI
Using Mq adapter am able to put the message in a queue and am able to get the message if i select the schema type as opaque, but am not able to get the message if i specify any schema type and am getting timed out exception.
Kindly help to proceed with this issue.

Hi,
Am also facing the same issue.
I would be thankful if anyone can provide the solution

F110- not able to clear the debit and credit entry with the same reference

Hi,
I am not able to clear the debit and credit entry with the same reference in F110 even after having the payment terms as immediate payment, payment method is maintained in document no and vendor master data. Both debit and credit entry is appearing in FBL1N as an open item but it is not appearing in F110.
In Log message appear as 8 days grace period is existing whereas as payment term is just 0001- immediate payment.
Kindly advice me what could be wrong.
Thanks,
Manya.

Hi,
Credit and debit balance in vendor account are not cleared automatically when only vendor line item has payment method and credit memo has not payment method. Also when there is not payment method maintained in vendor master data.
In such case to avoid payment to vendor when vendor has debit balance we perform debit balance check.
In second scenario when u2018individual paymentu2019 is selected in vendor master data vendor invoice and credit memo are not cleared automatically in F110.
To setoff vendor credit and debit balance in F110 you to uncheck u2018individual paymentu2019 check in vendor master data > company code data > payment data.
Thanks!
Raju

Not able to post the recurring entry using F.14

Similar Messages

Maybe you are looking for