Not able to print cards with design in iphoto any more

At Christmas I needed some more of the cards I had ordered at short notice so I printed them out on my own printer. It worked really well. I have just created a card and went to print but the card template does not print any more. I assume that this has been changed with an update???!! How do I fix??
It will still print the text and photos but not the card template( design)???

Welcome to the Apple Discussions. Are you able to change themes/templates on the cards?
Try this: delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your User/Library/Preferences folder, launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding the the Option key. You'll also have to reset the iPhoto's various preferences.

Similar Messages

OSX 10.8.5 not able to print color with HP photosmart 1115

I used to be able to print in color with this computer/laptop combo but after the upgrade to OS 10.8.5, there is no color option for printing. Please help!
This question was solved.
View Solution.

Hi,
The Photosmart 1115 is not officially supported on Mac OS X since version 10.5.
You may try using the 3rd party HPIJS print drivers, those are compatible with 10.8 and list the Photosmart 1115 as supported.
Be sure to install any of the 3 required downloads prior following the printer set up instructions:
http://www.linuxfoundation.org/collaborate/workgroups/openprinting/macosx/hpijs
Best of luck,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

HP Support Assistant not able to print/scan with my HP photosmart B-209a-m wireless

I am running Windows 7 (64 bit) and rencently my photosmart B-209a-m wireless is not responding when I try to scan or print. I just downloaded the print and scan doctor and I am getting a port match errror. Do you have any suggestions for how I can resolve this issue?
Thank you,

I think your router has issued a new IP address for your printer and the Win software can no longer find the printer.
Let's set a static (non-changing) IP address for the printer:
- Print a Network Config Page from the front of the printer. Note the printer's IP address.
- Type that IP address into a browser to reveal the printer's internal settings.
- Choose the Networking tab, then Wireless along the left side, then the IPv4 tab.
- On this screen you want to set a Manual IP. You need to set an IP address outside the range that the router automatically sets (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') to 250
- Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
- Enter your router's IP (on the Network Config Page) for the gateway.
- Enter 8.8.8.8 for the first DNS and 8.8.4.4 for the second DNS. This is Google DNS. You can choose another external DNS if you wish.
- Click 'Apply'.
Now, shut down the router and printer, start the router, wait, then start the printer.
Next, go to Start > Control Panel > Devices and Printers and delete all instances of the printer.
Finally, re-add the printer in this manner:
1. Make sure the printer is turned on and connected to your network. Verify that you can access the printer's internal web page by browsing to its IP address before continuing. Get its IP from a Network Test printed from the front panel of the printer.
2. Click >> Start >> Control panel >> Devices & Printers.
3. Click the Add a printer
4. Select Local printer
5. Select Create a new port and select Standard TCP/IP Port and click Next button.
6. Under Device type, select TCP/IP Device. Under Hostname or IP address, enter the printer's IP address. Click Next.
7. Select Hewlett-Packard from the list of manufacturers and select and select your printer model. Click Next.
If your printer model was not listed, then select Have Disk, browse the HP CD that came with your printer and select the first file that starts with hp and ends with inf. Click Open then OK. Select your printer model. Click Next.
8. If you are asked, use the currently installed driver.
9. It will ask for the Printer name -- enter a new name or use the existing one. This will be the name of the printer that you select from other applications.
10. You may be asked to share the printer. Choose NO.
11. The Print Test Page box appears. Go ahead and print it.
12. Click Finish.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

I am not able to print or to do a print preview with firefox 5. The problem happens with my Xerox Laser printer and also with Bullzip PDF printer. All prints are white with the printer and empty with the PDF printer.

I have a Phaser 6280DN and Bullzip (PDF virtual printer). They work perfectly with firefox 4 and with other application on my notebook running Windows Vista. But I am not able to print with firefox 5. All prints are white or empty. My notebook is a Dell Vostro 1710 with 3GB RAM and 500GB HD.

LytKT wrote:
We called the internet company and from their end everything was working.
Your ISP can only determine that their equipment is responding to ping requests. They can determine nothing about your equipment or if theirs is communicating with it.
Disconnect the Ethernet cable that comes from their equipment and connect it directly to a computer instead of the Extreme. If you can load web pages, it means your Internet connection is working. If not, it's not.
Is your ISP supplying cable Internet? Sometimes it is necessary to reset your ISP's connection by disconnecting their coaxial cable that connects to their modem. Literally unscrew it and leave it detached for a minute or so, then screw it back in again and power up the modem. They call this a "full reset". I don't know how it differs from simply powering down the modem, but I have confirmed that on rare occasions doing this will reset a recalcitrant connection.
... however the internet bars are present on the desktop and also indicated I was connected to the internet.
The Wi-Fi icon "bars" show that a connection to a wireless network has been established. It conveys no information about an Internet connection that lies beyond your local network. Option-click that menu and select "Open Wireless Diagnostics..." Authenticate with your Admin name and password and click the Continue button. Some useful diagnostic information and suggestions will result.

HELP: How do I print a photograph from my computer (not from a memory card) with photo quality ?

HP6510 print-scan-copy-web (All-in-one) ePrint wireless
Mac OS X 10 6.8
How do I print a photograph from my computer (not from a memory card) with photo quality ?
Is there a software that enables me to let the printer know that what I am sending to print is a photograph and not, for example, a document?
I sent a photograph to print from I-Photo and from Photoshop and the printer prints it like a document, that is to say, quickly and with very poor quality...for what is a PHOTOGRAPH.
I bought my print yesterday in Spain and Monday I must turn in a printing job at work. Pleas help. (Today is already Saturday.)
Thanks

In OSX when you go to file and print you will usually get a window that pops up with print settings.
In 10.6 it may only show you the printer to use, and the preset to use, but you can click the square to the right of that with a triangle in it to view more options.
From here there is a drop down for paper type/quality, where you can select photo paper, and a higher quality, then go to print.
The following link will actually show screenshots of these settings and how to navigate them:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01662562&tmp_task=useCategory&cc=us&dlc=en&lang...
Jon-W
I work on behalf of HP
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
Click the KUDOS STAR on the left to say “Thanks” for helping!

Not able to print PDF report from Oracle APPS

adcmctl.sh version 115.17.
We have a network printer HP Laserjet 4250 which is configured on our concurrent manager server of RH Linux OS. We are using HP LASERJET 4250 Postscript driver. We are able to print PDF's directly however through CC manager we are not able to print reports in Proper PDF format. Has anyone faced such an issue with Oracle Apps?

user11996936 wrote:
Has anyone faced such an issue with Oracle Apps?Maybe. Maybe not. Ask to the proper forum. Here you are in Peoplesoft forum.
Nicolas.

Not able to Print the report

Hello All,I am not able to print the report. When i click on the icon a blank form opens up. Is there something i need to do to see the form with some details.Thanksram 

Hi Ram, Can you give me some more details around your issue? How exactly are you building the viewer? Are you using the JSP Page Wizard that comes with Crystal Reports for Eclipse? If so, then can you tell me what application server you are deploying to? All of these pieces may help narrow down the issue. Regards, Sean Johnson (CR4E Product Manager) <a href="http://www.eclipseplugincentral.com/Web_Links-index-req-ratelink-lid-639.html">Rate this plugin @ Eclipse Plugin Central</a>

About 2 weeks ago, not able to print all pages in a .pdf document using internet explorer 11?

About 2 weeks ago, not able to print all pages in a .pdf document stored in a folder (I'm using Windows 7)?
It only prints 1 page then my Brother MFC-J4510DW Printer says "Please put another piece of paper in the feed slot"....the problem is the print setting is set to "manual mode" in Windows 7 rather than "general setting". If you try to change the setting to "general", it will not accept the change.

Hi.
I did try using the printParams feature and it worked, but since I need to be able to print sets of non-consecutive pages, I end up having to bring up the print dialogue multiple times and have the user set watermarks each time.
I decided to just create a new pdf in a temp directory containing the selected pages and open this document in a new window. This works well and allows them to use the print button on the window to print, bringing up the print dialogue just once. However, since I need to open the document in a way that shows the print button, I am using OpenInWindowEx, with AV_DOC_VIEW, and the option PDUseBookmarks or PDUseThumbs, rather than PDUseNone. This displays a toolbar which also includes icons for creating a new pdf, deleting pages, etc. I do not really want to include these icons on the toolbar. Is there a way to remove unwanted icons from the toolbar, or make them invisible?
Hope this makes sense. Thanks for your help.
Mary

My reminders are gone from my Ical since upgrade. What do I need to do to input reminders in Ical and be able to print reminders with my ical. Thank you

My reminders are gone from my Ical since upgrade. What do I need to do to input reminders in Ical and be able to print reminders with my ical. Thank you

I totally agree. I just wasted .5 hrs trying to figure out how to manipulate and sync the reminders with the iCAl. Thanks for posting this thread online, I can stop wasting my time now. Apple, please change it back or make these apps sync.
Side note. I was creating my to do list and found the ability to asign a date by draging the task to the calendar in the bottom right. Then I discovered that I can drag that same reminder/to-do task into iCal and it will be created as an event. Would be great if I could simply sync the reminders to iCal instead of draging them over though. Then when I make the change in one the other can update with the next sync. This also prevents human error if I drag and drop the reminder onto the wrong date in iCal.

Not able to print reader file

When I convert MS Word files to Adobe Reader files, some people are not able to print them. Some of the content prints for instance, but some is missing. The graphics may print, but the text is missing.
Any ideas?
Thanks,
Brian

Thanks for the response Michael,
Here is a file I converted from Word to a PDF that will only print the graphics.
I am using Word 2007 and Adobe Reader 9 Pro. I have the CS4 suite. When I save, I am using the following parameters:
Convert Document Information
Enable Accessibility and Reflow with tagged Adobe PDF
Create Bookmarks
Convert Word Headings to Bookmarks
I should add that changing and eliminating these parameters make no difference.
Thanks,
Brian

Single user is not able to print PDF files.

I have the following situation at our organisation for one of our users.
Printer:
Kyocera FS1030D
Kyocera KM-C3225
I have one user that is not able to print any PDF files in our network. (User Chris)
Printing a Word document or Notepad works fine.
To be specific:
The user is mainly using Windows 7 Pro 64 bits.
We also have a Citrix environment.
When this user is trying to print a PDF file we follow the following steps:
Open any PDF file.
Go to: File -> Print -> Select the printer to use.
Hit Print button.
Now the pop up comes up loading the PDF file to be printed. (The percentage bar)
After this bar disappears nothing happens.
The print que does not show on the bottom right hand of the screen.
If you open the printer que there is no document that needs to be printed.
We tested printing a PDF file on a different computer with user account Chris, but no success.
We tested printing a PDF file on the same computer with another user account, success.
We tested printing a PDF file in our Citrix environment (still on Chris his pc), success.
So as a wrap up: Printing with another user account works fine. The issue seems to be located in the user profile, but is not specific to a single computer.
We tested the following.
Print as Image setting.
Remove the print drivers and reinstalled them.
Renamed the Windows folders where the drivers are installed.
Removed Adobe Acrobat version 9 and installed version 10.
Any suggestions are welcome.

Hi Bill@VT,
Thanks for your reply. I have checked and the current installed version is 10.1.4. I tried updating but I get the message that the there are no new updates available.
Also I tried to find a 64 bits download but unfortunately I cannot find a 64 Bits install file.

Java aplication not able to detect card reader sometimes

Hi
We have a Java application (jre1.6.0_05.) which runs as window service under "Local System". It tries to detect card reader after every one minute. Normally it is working fine. However on some machines (which can be Windows XP, 2003 Server etc) some times it is not able to detect Card Reader, while other applications (which are not Java based) are able to detect. Sometimes service restart helps in solving the issue, but it reoccurs again after few hours/days.
Below is the exception we get:
javax.smartcardio.CardException: list() failed
at sun.security.smartcardio.PCSCTerminals.list(PCSCTerminals.java:109)
at javax.smartcardio.CardTerminals.list(CardTerminals.java:55)
Below is the code we are using to get list of terminals:
TerminalFactory factory = TerminalFactory.getDefault();
try {
terminals = factory.terminals().list();
} catch (CardException e) {
e.printStackTrace();
}Any idea what might be causing this random problem?

Hi,
According to the source for OpenJDK 6 (b19) the only way to get the exception you posted was with a PCSCException being thrown with the root exception wrapped in the new exception.
// from PCSCTerminals.list(State state)
try {
// do some stuff to get the reader list
} catch (PCSCException e) {
throw new CardException("list() failed", e);
}If this was not the case in the version you have, you will definitely see the root cause with the new JDK.
Cheers,
Shane

Not able to print in duplex

On this windows 7 PC, Since I upgraded from Acrobate Reader 8 to Adober 9 and reader10, I am not able to print in duplex mode. I works fine from another computer Windows XP using Adobe Reader 6.0 using the same shared and WiFi printers.
Looking at the document file property in the advance tab, in the print dialog preset window, I am not able to change the duplex mode from grayed "Simplex" to Duplex.
How do I fix this problem?
See screen print picture

Hi,
The HP Deskjet 2520 does not support automatic print duplexing and therefore any checkbox will not apply for such.
You may perform manual duplexng on Mac OS using the Pages to Print option as following:
From the file used to print click the File menu and select Print.
NOTE: The Print window might be minimized. Press on Show Details to show any available print option.
From the main drop does menu select Paper Handaling.
The main menu will usually list the program name (e.g. TextEdit).
Will appear as Copies & Pages within Microsoft Office applications.
Set the Pages to Print option as Odd Only, as well set the Page Order as Automatic and click on Print.
After the odd-numbered pages have printed, reload the paper with the printed side facing up and repeat the process above by setting the Pages to Print as Even Only this time.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

User not able to print from SAP

Hi guys,
User is not able to print from SAP. The printer is directly connected to his PC. It is not a network printer. The user is able to print at OS level perfectly. IN SP01, it shows in green and the print job has been completed successfully. I can see the output request. Its all fine in SAP. I am not sure why it is not printing from SAP. Please help ?
Thanks

hi venkata,
did you already defined your printer on SAP Server using tcode SPAD ?
What kind of printing you're using ?
My suggest for simplest one is create new output devices.
Type tcode SPAD
Give simple name
Choose SAPWIN for device type (if you're using WIndows clients)
On Access Method tab
Choose Host Spool Access Method F : Front end Printing or G :
For Host Printer fill with __DEFAULT (remember double underscore)
save and test it.
ardhian
http://sapbasis.wordpress.com

Users not able to print local (frontend)

SAP users are not able to print LOCL (front-end). The error message found in SP01 is waiting for formatter. This is no dump on ST22 related to this problem. SM21 is clean as well. SM66 looks OK. There are plenty of spool work process in wait status (SM50). How to troubleshoot this problem?

Hello.
Is this an issue across all of the users?
The way i would look into this is first look at the user in SU01. Does the user have local as the printer default and is print immediately checked?
From there i would have a look at the spool using transaction SP01. Is this beginning to get full?
If it is just specfic users is there any differences with the SAPGui's to someone that it works with? Does the users have SAPLPD coming up? This often gives a better error than the spool. If it is what is the error.
Sorry if you have already looked into this but this is the process i always work through with printing errors
Kind Regards,
Emily
Edited by: Emily Needham on Jul 28, 2009 3:24 PM

Not able to print cards with design in iphoto any more

Similar Messages

Maybe you are looking for