Not able to print in landscape using acroread ..

Hi,
On solaris 5.8, we installed Acrobat7.0.
on server we ahve a file which is in .pdf format
$ file o2487088.out
o2487088.out: Adobe Portable Document Format (PDF) v1.1
I am able to pring this file using
cat o2487088.out | acroread -toPostScript -shrink | lp -d INFOSYS2
This prints in portrait and from rightside letters get truncated.
I wnat to print this file in ladscape so I am giving
cat o2487088.out | acroread -toPostScript -pairs -shrink -landscape | lp -d INFOSYS2
It is stprinting but not in ladscape.
Can you tell em how to can i print in landscape using acroread ?

Help to rescue the child+
Very urgently money resources are required, translate who how many can on webmoney, perhaps you will rescue a life to our girl!!!!!
Eight years old to Sasha Suldina, our daughter. In 2001 doctors have made it the diagnosis: sharp a blood cancer.
The child has passed chemotherapy in the Moscow regional oncological clinic (Balashikha),
Now is in remission. In January, 2003 have been found out viruses of hepatitises In and With,
That very seriously threatens life of Sasha. Now we find additional financial assets for this purpose,
To have possibility to spend qualitative treatment of hepatitises expensive medicines(these preparations are not included in the list of preferential medicines).
We ask everyone who is not indifferent to the stranger to misfortune, to bring whenever possible the feasible contribution to business of rescue of the girl.
Copies of documents are attached to the letter.
Very much we ask, translate who how many can, probably you will rescue our girl
This letter not a deceit, we Ask the help, a critical situation.
Thanks all who helped, helps or wishes to help, the help to our girl now is necessary.
Then we spent a lot of time with the child on air, walking on wood. After 3 hours of walks Sasha has started to complain of strong weariness and a pain in joints. Have taken temperature. 38,7. The doctor who has suspected a usual sharp respiratorno-virus infection has been immediately caused. Standard antibiotics and warm tea with a raspberry have been appointed. Late at night observed very strong pains in the bottom of a stomach and its pressure (the stomach was «доскообразный»).Fast immediately hospitalised the child in the Central regional hospital of of Balashikha with suspicion on a sharp appendicitis. Emergency operation has been spent, the diagnosis has proved to be true. The peritonitis, an inflammation began. Operation on appendicitis removal has passed successfully. But after operation condition Сашеньки has not improved. The heat (from above 38).В stably kept Every possible analyses of blood, including on rare infectious diseases, have not given results. But viruses of a belly typhus and a salmonella have been found out. Meanwhile a condition of the child promptly worsened. Haemoglobin level was more low 60, the quantity тромбоцитов and лекоцитов has sharply decreased. Donor blood and an intravenous hormone преднизолон was applied. From children's branch of oncology МООД of Balashikha, Svetlana Varfolomeyev has been invited to that moment were зав.отделением which has suspected system disease of blood at the child. Sasha it has been urgently translated in children's oncological branch where the diagnosis «sharp лимфобластный лейкоз» has been exposed, a blood cancer. Pathological бластных cages in a bone brain was more than 96 %.Состояние the child - the hardest. There has been immediately begun antibacterial therapy by antibiotics of a wide spectrum of action, in parallel - massed инфузионная therapy (glucose, физраствор), was applied преднизолон. After a while there has been begun chemotherapy of the sharp period under German report ALL BFM-90.
Always yours, Irina and Evgenie
SULDINA SASHA, 16.12.1996 of the river
It is observed in the Moscow regional oncological clinic (МООД)
(Acceptance date on the account - June, 2001)
The clinic address: 143900 Moscow regions, Balashikha, street Karbysheva, 6, children's branch.
The case record № 6562, an out-patient card - M - 377
Attending physician МООД: Injushkina Evgenie Vasilevna
Managing branch MOOD: Varfolomeyev Svetlana Rafaelevna
The pediatrist on a residence: Меткалова Love Александровна
The inquiry on physical inability: series МСЭ - 011, № 832324, is given out 31.10.01 Main bureaus
медико - social examination on the basis of the Certificate № 538.
(Physical inability is prolonged 13.11.03, the new inquiry: series МСЭ - 2001, № 1090547, is given out 13.11.03 Bureaus
МСЭ Balashihinsky area of the Moscow area on the basis of the Certificate № 4123)
(Physical inability is prolonged 09.12.04, the new inquiry: series МСЭ - 2001, № 5992493, is given out 09.12.04 Bureaus
МСЭ Balashihinsky area of the Moscow area on the basis of the Certificate № 5041)
The pension certificate: № 921810, it is given out by 20.12.02 Management ПФР of Balashihinsky area.
Expensive operation is required, send money and rescue the girl
The scanned copies of documents: http://new.swapfile.ru/files/31402 / % D0%9E%D1%82%D1%81%D0%BA%D0%B0%D0%BD%D0%B8%D1%80%D0%BE%D0%B2%D0%B0%D0%BD%D0%BD%D1%8B%D0%B5 + % D0%B4%D0%BE%D0%BA%D1%83%D0%BC%D0%B5%D0%BD%D1%82%D1%8B.rar
Photos Of Sasha:
http://new.swapfile.ru/files/31403 / % D0%A4%D0%BE%D1%82%D0%BE%D0%B3%D1%80%D0%B0%D1%84%D0%B8%D0%B8.rar
For interested persons to render immediate material aid:
ELECTRONIC PURSES: Transfer by means of system of payments WEBMONEY TRANSFER:
PURSES: USD Z338444558172, EUR E227345040422, RUB R195149635709
WMID: 416818651774
The user (Suldin E. Ju) is certified.
We very much hope for your support....

Similar Messages

I am not able to print double side using HP 2015dn printer using imac

I am not able to print double side using HP 2015dn printer using imac.

I found this information on HP site, but the article was quite old. May still be relevant:
1. Create a multi page document, or something that is more than one page.
2. Go to File/Page Setup.
3. Ensure the printer is listed in the Format for menu.
4. Click OK.
5. Go to File/Print but do not print yet.
6. Change the Copies and Pages menu to 'Layout'.
7. The Two-Sided option will be selectable only if the P2015 is listed in the Printer menu at the top of the print dialogue box.
8. Once you have chosen Long-edged binding, for example, click Print.

About 2 weeks ago, not able to print all pages in a .pdf document using internet explorer 11?

About 2 weeks ago, not able to print all pages in a .pdf document stored in a folder (I'm using Windows 7)?
It only prints 1 page then my Brother MFC-J4510DW Printer says "Please put another piece of paper in the feed slot"....the problem is the print setting is set to "manual mode" in Windows 7 rather than "general setting". If you try to change the setting to "general", it will not accept the change.

Hi.
I did try using the printParams feature and it worked, but since I need to be able to print sets of non-consecutive pages, I end up having to bring up the print dialogue multiple times and have the user set watermarks each time.
I decided to just create a new pdf in a temp directory containing the selected pages and open this document in a new window. This works well and allows them to use the print button on the window to print, bringing up the print dialogue just once. However, since I need to open the document in a way that shows the print button, I am using OpenInWindowEx, with AV_DOC_VIEW, and the option PDUseBookmarks or PDUseThumbs, rather than PDUseNone. This displays a toolbar which also includes icons for creating a new pdf, deleting pages, etc. I do not really want to include these icons on the toolbar. Is there a way to remove unwanted icons from the toolbar, or make them invisible?
Hope this makes sense. Thanks for your help.
Mary

I can only print the current page of downloaded pdf's. Not able to print "all". I'm using a Macbook air.

I can only print the current page of downloaded pdf's. Not able to print "all". I'm using a Macbook air.

it says "the document could not be printed". "There were no ages selected to print".
I selected "all". I always tried selecting pages "1-3".
The only choice that works is current page. Very strange.

Not able to print PDF report from Oracle APPS

adcmctl.sh version 115.17.
We have a network printer HP Laserjet 4250 which is configured on our concurrent manager server of RH Linux OS. We are using HP LASERJET 4250 Postscript driver. We are able to print PDF's directly however through CC manager we are not able to print reports in Proper PDF format. Has anyone faced such an issue with Oracle Apps?

user11996936 wrote:
Has anyone faced such an issue with Oracle Apps?Maybe. Maybe not. Ask to the proper forum. Here you are in Peoplesoft forum.
Nicolas.

Not able to Print the report

Hello All,I am not able to print the report. When i click on the icon a blank form opens up. Is there something i need to do to see the form with some details.Thanksram 

Hi Ram, Can you give me some more details around your issue? How exactly are you building the viewer? Are you using the JSP Page Wizard that comes with Crystal Reports for Eclipse? If so, then can you tell me what application server you are deploying to? All of these pieces may help narrow down the issue. Regards, Sean Johnson (CR4E Product Manager) <a href="http://www.eclipseplugincentral.com/Web_Links-index-req-ratelink-lid-639.html">Rate this plugin @ Eclipse Plugin Central</a>

Not able to print reader file

When I convert MS Word files to Adobe Reader files, some people are not able to print them. Some of the content prints for instance, but some is missing. The graphics may print, but the text is missing.
Any ideas?
Thanks,
Brian

Thanks for the response Michael,
Here is a file I converted from Word to a PDF that will only print the graphics.
I am using Word 2007 and Adobe Reader 9 Pro. I have the CS4 suite. When I save, I am using the following parameters:
Convert Document Information
Enable Accessibility and Reflow with tagged Adobe PDF
Create Bookmarks
Convert Word Headings to Bookmarks
I should add that changing and eliminating these parameters make no difference.
Thanks,
Brian

Single user is not able to print PDF files.

I have the following situation at our organisation for one of our users.
Printer:
Kyocera FS1030D
Kyocera KM-C3225
I have one user that is not able to print any PDF files in our network. (User Chris)
Printing a Word document or Notepad works fine.
To be specific:
The user is mainly using Windows 7 Pro 64 bits.
We also have a Citrix environment.
When this user is trying to print a PDF file we follow the following steps:
Open any PDF file.
Go to: File -> Print -> Select the printer to use.
Hit Print button.
Now the pop up comes up loading the PDF file to be printed. (The percentage bar)
After this bar disappears nothing happens.
The print que does not show on the bottom right hand of the screen.
If you open the printer que there is no document that needs to be printed.
We tested printing a PDF file on a different computer with user account Chris, but no success.
We tested printing a PDF file on the same computer with another user account, success.
We tested printing a PDF file in our Citrix environment (still on Chris his pc), success.
So as a wrap up: Printing with another user account works fine. The issue seems to be located in the user profile, but is not specific to a single computer.
We tested the following.
Print as Image setting.
Remove the print drivers and reinstalled them.
Renamed the Windows folders where the drivers are installed.
Removed Adobe Acrobat version 9 and installed version 10.
Any suggestions are welcome.

Hi Bill@VT,
Thanks for your reply. I have checked and the current installed version is 10.1.4. I tried updating but I get the message that the there are no new updates available.
Also I tried to find a 64 bits download but unfortunately I cannot find a 64 Bits install file.

Not able to print in duplex

On this windows 7 PC, Since I upgraded from Acrobate Reader 8 to Adober 9 and reader10, I am not able to print in duplex mode. I works fine from another computer Windows XP using Adobe Reader 6.0 using the same shared and WiFi printers.
Looking at the document file property in the advance tab, in the print dialog preset window, I am not able to change the duplex mode from grayed "Simplex" to Duplex.
How do I fix this problem?
See screen print picture

Hi,
The HP Deskjet 2520 does not support automatic print duplexing and therefore any checkbox will not apply for such.
You may perform manual duplexng on Mac OS using the Pages to Print option as following:
From the file used to print click the File menu and select Print.
NOTE: The Print window might be minimized. Press on Show Details to show any available print option.
From the main drop does menu select Paper Handaling.
The main menu will usually list the program name (e.g. TextEdit).
Will appear as Copies & Pages within Microsoft Office applications.
Set the Pages to Print option as Odd Only, as well set the Page Order as Automatic and click on Print.
After the odd-numbered pages have printed, reload the paper with the printed side facing up and repeat the process above by setting the Pages to Print as Even Only this time.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Not able to print anything on ATG Rest webservices

Hi..I am new to ATG Rest.. Just for the heads up, i followed following steps :-
1 ) Added rest module to MANIFEST.MF
2) Created a custom class which looks like this -
package com.sgs.utils;
import atg.nucleus.GenericService;
public class SGSdummy extends GenericService {
public void dummy() throws Exception {
 logDebug("sdbfhj");
3) Mapped it to the property file -
$class=com.sgs.utils.SGSdummy
$scope=global
loggingInfo=true
4) Configured the security for above component in restSecurityConfiguration.xml
<rest-security>
<resource component="/atg/commerce/order/dummy" secure="false">

<method name="dummy" secure="false"/>
</resource>
</rest-security>
I commented acl as i really didn't need it for a POC plus it was throwing 401 unauthorized.
5) Now I am calling it from chrome's Advanced Rest Client. However, status is 200 OK but I am not able to print a logDebug or sysout in my SGSdummy class.
 When i check console, it says "Depth 0 is greater than maximum depth 0"
 I tried to change maxDepthAllowed in configuration.properties but in vain..I need help to proceed.

Now I am trying to create a REST request using custom client. I believe it should be a POST request as I am trying to call a method. My custom client looks like this :-
package atg.rest.client;
import java.io.IOException;
import java.util.HashMap;
import java.util.Map;
import atg.rest.client.RestClientException;
import atg.rest.client.RestComponentHelper;
import atg.rest.client.RestResult;
import atg.rest.client.RestSession;
public class RestDemoClient {
/** The m username. */
private String mUsername;
/** The m password. */
private String mPassword;
/** The m host. */
private String mHost;
/** The m port. */
private int mPort;
/** The m session. */
private RestSession mSession = null;
 * Instantiates a new method call by rest.
public RestDemoClient() {
 * Execute.
 * @throws RestClientException the rest client exception
private void execute() {
 mSession = RestSession
 .createSession(mHost, mPort, mUsername, mPassword);
 mSession.setUseHttpsForLogin(false);
 Map<String,Object> params = new HashMap<String,Object>();
 params.put("atg-rest-input", "json");
 RestResult result = null;
 try {
 result = RestComponentHelper.executeMethod("/atg/rest/SGSdummy", "addOrder", new
 Object[] {}, params, mSession);
 } catch (RestClientException e1) {
 System.out.println(e1);
 try {
 if (result != null && result.getResponseCode() == 200) {
 System.out.println("Executed Successfully.");
 } else {
 System.out
 .println("Error while execution : Error Code ["
 + result.getResponseCode()
 + "] and Message ["
 + result.getResponseMessage() + "]");
 } catch (IOException e) {
 System.out.println("Error while execution Successfully.");
 * @param args
public static void main(String[] args) {
 RestDemoClient stepUtils = new RestDemoClient();
 stepUtils.mUsername = "admin";
 stepUtils.mPassword = "admin";
 stepUtils.mHost = "localhost";
 stepUtils.mPort = 8080;
 stepUtils.execute();
But everytime i execute this, I get following exception :-
atg.rest.client.RestClientException: java.io.IOException: Unauthorized Server returned HTTP response code: 401 for URL: http://localhost:8080/rest/bean/atg/rest/SGSdummy/addOrder
Exception in thread "main" java.lang.NullPointerException
at atg.rest.client.RestDemoClient.execute(RestDemoClient.java:64)
at atg.rest.client.RestDemoClient.main(RestDemoClient.java:82)
I tried different set of credentials but nothing seems to work out for me.
However it always works fine for GET requests. I am able to see status as 200 OK but it never hits my addOrder() method in SGSdummy class, hence I am not able to print sysout in that method. For status 200 OK GET requests, my logs say "[JSONOutputCustomizer] Depth 0 is greater than maximum depth 0. Outputting object of class java.lang.String as string rather than continuing to nest."
Can you give me some pointers how to run it without any errors plus it should print a random sysout in my custom class. Thanks

User not able to print from SAP

Hi guys,
User is not able to print from SAP. The printer is directly connected to his PC. It is not a network printer. The user is able to print at OS level perfectly. IN SP01, it shows in green and the print job has been completed successfully. I can see the output request. Its all fine in SAP. I am not sure why it is not printing from SAP. Please help ?
Thanks

hi venkata,
did you already defined your printer on SAP Server using tcode SPAD ?
What kind of printing you're using ?
My suggest for simplest one is create new output devices.
Type tcode SPAD
Give simple name
Choose SAPWIN for device type (if you're using WIndows clients)
On Access Method tab
Choose Host Spool Access Method F : Front end Printing or G :
For Host Printer fill with __DEFAULT (remember double underscore)
save and test it.
ardhian
http://sapbasis.wordpress.com

Users not able to print local (frontend)

SAP users are not able to print LOCL (front-end). The error message found in SP01 is waiting for formatter. This is no dump on ST22 related to this problem. SM21 is clean as well. SM66 looks OK. There are plenty of spool work process in wait status (SM50). How to troubleshoot this problem?

Hello.
Is this an issue across all of the users?
The way i would look into this is first look at the user in SU01. Does the user have local as the printer default and is print immediately checked?
From there i would have a look at the spool using transaction SP01. Is this beginning to get full?
If it is just specfic users is there any differences with the SAPGui's to someone that it works with? Does the users have SAPLPD coming up? This often gives a better error than the spool. If it is what is the error.
Sorry if you have already looked into this but this is the process i always work through with printing errors
Kind Regards,
Emily
Edited by: Emily Needham on Jul 28, 2009 3:24 PM

Not Able to Print in PDF Format Apex

we are not able to print in pdf format with using a template, if we use default layout we are getting a pdf output,
Can any one please help me on this issue....
Thanks
Malleswar

Hello Malleswar,
we are not able to print in pdf format with using a template, if we use default layout we are getting a pdf output,If your scenario with APEX Listener is generally capable of producing a PDF when using a working template, than the error is very likely to be in your template, not in APEX Listener.
If that's the case, you'll probably find more people with experiences on how to build custom xsl-templates into your APEX application in the APEX forum: {forum:id=137}.
If you decide to post there (or even if you think it's better to continue here), please provide information on your APEX and APEX Listener version and whether you see some error information in APEX Listeners log when trying your own template or not. If you don't see anything there right now, enabling debug mode will make the log more verbose and probably provide a hint on which part of your template can't be processed properly by the FOP built into APEX Listener.
-Udo

TDMS Project not able to assign a landscape

I have a landscape created between source and target and ofcourse the controller system, but when I am trying to select the same, in my project, I am not able to see any landscape, and it takes me to create a landscape. not sure if I am doing it wrong..
Wondering if someone could help. Note: Created landscape is green and is distributed with the RFC's. Am I missing anything..?

Interesting..
I think the one already created is "tdms landscape". any idea what we can use this for then? I mean for any specific project type?
Lets say if I now create a new landscape of type HCM, and this helps me to take certain data from the source to the target, can I use another landscape to bring another set of data into the same target landscape? or does it impact.
Coz, I have 1 source and 1 target here, which is ECC/ that has both HCM and FICO.
Now, if I want to select HCM related data, I understood that I selected a landscape related to HCM and then create a project by selecting a HCM template.
Once this is done, can I opt other template / BPL or anything to bring in more data to the same target system on top of what I have extracted earlier?
And once this is done, or while this is being done, can I select/create another landscape and create another project to pull FICO related data to the same target system? would there be a conflict..?

I am not able to print or to do a print preview with firefox 5. The problem happens with my Xerox Laser printer and also with Bullzip PDF printer. All prints are white with the printer and empty with the PDF printer.

I have a Phaser 6280DN and Bullzip (PDF virtual printer). They work perfectly with firefox 4 and with other application on my notebook running Windows Vista. But I am not able to print with firefox 5. All prints are white or empty. My notebook is a Dell Vostro 1710 with 3GB RAM and 500GB HD.

LytKT wrote:
We called the internet company and from their end everything was working.
Your ISP can only determine that their equipment is responding to ping requests. They can determine nothing about your equipment or if theirs is communicating with it.
Disconnect the Ethernet cable that comes from their equipment and connect it directly to a computer instead of the Extreme. If you can load web pages, it means your Internet connection is working. If not, it's not.
Is your ISP supplying cable Internet? Sometimes it is necessary to reset your ISP's connection by disconnecting their coaxial cable that connects to their modem. Literally unscrew it and leave it detached for a minute or so, then screw it back in again and power up the modem. They call this a "full reset". I don't know how it differs from simply powering down the modem, but I have confirmed that on rare occasions doing this will reset a recalcitrant connection.
... however the internet bars are present on the desktop and also indicated I was connected to the internet.
The Wi-Fi icon "bars" show that a connection to a wireless network has been established. It conveys no information about an Internet connection that lies beyond your local network. Option-click that menu and select "Open Wireless Diagnostics..." Authenticate with your Admin name and password and click the Continue button. Some useful diagnostic information and suggestions will result.

Not able to print in landscape using acroread ..

Similar Messages

Maybe you are looking for