Not Able To Print w/ Lexmark X2600 After Recent Airport Firmware Update

Hi,
So, after the recent firmware update for the Airport Extreme (802.11n), I can no longer print to my printer share. The device is recognized in Bonjour, and I use the correct driver as I did before, but when I send something to the printer, it just reads:
"Connecting to MyNetwork.local...
There is a problem communicating with the printer. Make sure the printer is powered on and connected to the computer. Delete or hold the job and try again."
Now, if I connect the printer directly to my computer and set it up with the same drivers over USB, it works just fine. Can I get some support on this?

Hi,
Have you tried this?
To change the printer’s network settings:
1. Open the printer's embedded Web server.
2. Click the Networking tab. For wireless settings, click Wireless. For IP settings, click IP
Configuration.
3. Change the printer's settings to match the settings of the network, then click Finish.
4. Close the printer's EWS, then disconnect the Ethernet cable from the printer.
5. The control panel lights will cycle.
The previous procedure is from the Wireless Printer User Guide for your printer.
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Similar Messages

27" iMac very sluggish after recent software/firmware update

I bought my 27" iMac (2.7 GHz Intel Core i5, 4GB RAM) maybe 6-7 months ago...and it has had NO problems. Even after updating to Lion. Smooth.
But after the most recent graphics firmware update (Feb 29) and software update (late Feb/ealry March 2012...can't remember exact date)...now my iMac is so sluggish! Running more than one application really makes my iMac run slow. And I'm not talking about Photoshop...I'm talking about Firefox, Safari, Mail, iTunes. Basic ones. Especially bad when I play video...very choppy.
Any clue what's going on? I ran Disk Utilitiy (all good, repaired permissions), Clean My Mac, CCleaner...all say good and healthy. So I am at a loss.
Any help would be greatly be appreciated. I'm still under warranty...but I don't think I need to bring it in do I?
Thanks!

Hi Linc Davis,
I am trying the Terminal commands as you suggested. I am copying and pasting the output below:
Step 1 output:
com.Cycling74.driver.Soundflower (1.5.1)
Step 2 output (after password):
com.microsoft.office.licensing.helper
com.machangout.glims.loader
com.citrixonline.GoToMyPC.CommAgent
Step 3 output:
com.citrixonline.GoToMyPC.LaunchAgent
com.adobe.CS4ServiceManager
com.macpaw.CleanMyMac.volumeWatcher
com.macpaw.CleanMyMac.trashSizeWatcher
com.macpaw.CleanMyMac.helperTool
com.google.keystone.user.agent
Step 4 output:
/Library/Components:
/Library/Extensions:
/Library/Frameworks:
AEProfiling.framework
AERegistration.framework
Adobe AIR.framework
AudioMixEngine.framework
GlimsAdditions.framework
HPDeviceModel.framework
HPPml.framework
HPServicesInterface.framework
HPSmartPrint.framework
NyxAudioAnalysis.framework
PluginManager.framework
iLifeFaceRecognition.framework
iLifeKit.framework
iLifePageLayout.framework
iLifeSQLAccess.framework
iLifeSlideshow.framework
net.juniper.DSApplicationServices.framework
net.juniper.DSCoreServices.framework
net.juniper.DSNetworkDiagnostics.framework
/Library/Input Methods:
/Library/Internet Plug-Ins:
.DS_Store
AdobePDFViewer.plugin
Flash Player.plugin
GlimsAdditions.webplugin
JavaAppletPlugin.plugin
OfficeLiveBrowserPlugin.plugin
Quartz Composer.webplugin
QuickTime Plugin.plugin
SharePointBrowserPlugin.plugin
SharePointWebKitPlugin.webplugin
Silverlight.plugin
flashplayer.xpt
huludesktop.webplugin
iPhotoPhotocast.plugin
net.juniper.DSSafariExtensions.plugin
nsIQTScriptablePlugin.xpt
/Library/Keyboard Layouts:
/Library/LaunchAgents:
com.adobe.CS4ServiceManager.plist
com.citrixonline.GoToMyPC.LaunchAgent.plist
com.machangout.glims.agent.plist
/Library/LaunchDaemons:
com.apple.remotepairtool.plist
com.citrixonline.GoToMyPC.CommAgent.plist
com.machangout.glims.loader.plist
com.microsoft.office.licensing.helper.plist
/Library/PreferencePanes:
Flash Player.prefPane
GoToMyPC.prefPane
Perian.prefPane
/Library/PrivilegedHelperTools:
com.microsoft.office.licensing.helper
/Library/QuickLook:
GBQLGenerator.qlgenerator
iWork.qlgenerator
/Library/QuickTime:
AC3MovieImport.component
AppleIntermediateCodec.component
AppleMPEG2Codec.component
Perian.component
/Library/ScriptingAdditions:
Adobe Unit Types.osax
Glims.osax
/Library/Spotlight:
GBSpotlightImporter.mdimporter
LogicPro.mdimporter
Microsoft Office.mdimporter
iWork.mdimporter
/Library/StartupItems:
Aladdin
/etc/mach_init.d:
/etc/mach_init_per_login_session.d:
/etc/mach_init_per_user.d:
Library/Address Book Plug-Ins:
SkypeABDialer.bundle
SkypeABSMS.bundle
YMsgrCallABPlugin.bundle
YMsgrMsnABPlugin.bundle
YMsgrSmsABPlugin.bundle
YMsgrYimABPlugin.bundle
Library/Fonts:
Library/Input Methods:
.localized
Library/Internet Plug-Ins:
BrowserPlus_2.9.2.plugin
GlimsAddition.notplugin
Picasa.plugin
Library/Keyboard Layouts:
Library/LaunchAgents:
com.apple.AddressBook.ScheduledSync.ABExchangeSource.1B4BA2C7-8ACA-4857-8BDE-B6F 9698BABA2.plist
com.apple.AddressBook.ScheduledSync.PHXCardDAVSource.1F0D2067-5983-4134-AD50-A70 652DAED7C.plist
com.apple.AddressBook.ScheduledSync.PHXCardDAVSource.A4130F93-370D-42FD-86A0-CD8 4B1494812.plist
com.google.keystone.agent.plist
com.macpaw.CleanMyMac.helperTool.plist
com.macpaw.CleanMyMac.trashSizeWatcher.plist
com.macpaw.CleanMyMac.volumeWatcher.plist
Library/PreferencePanes:
BrowserPlusPrefs.prefPane
Growl.prefPane
Step 5 output:
2012-03-11 22:38:01.741 osascript[408:707] Error loading /Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: dlopen(/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types, 262): no suitable image found. Did find:
/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: no matching architecture in universal wrapper
osascript: OpenScripting.framework - scripting addition "/Library/ScriptingAdditions/Adobe Unit Types.osax" declares no loadable handlers.
GrowlHelperApp, Skype, Nokia Multimedia Transfer, Quicksilver, Dropbox
Ok...I hope you can see if there are some 3rd party apps that are slowing down my system Linc Davis...please let me know okay?
Thank you very much for your assitance!!!

I am not able to print in cannon ir series 2520 after Maverick update

I am not able to print in cannon ir series 2520 after Maverick update, printer is in pause and even after resuming it it dosent work. Pl help
Same case with the projector not able to connect it.

The driver link you have provided will work. But we have found that if the previous driver is installed on the Mac, the user selects this older driver PPD when adding the printer instead of the new driver PPD because it has UFR in the name, which the new v10.2 driver does not.
So as mentioned this new version UFR2 v10.2.1 includes an uninstaller to remove the old driver and PPDs, thus reducing the chance of the user making a mistake when adding the printer. The next issue is then getting them to select the correct protocol.
I expect that Canon USA will update their site over the weekend to provide this latest version of the driver. Canon Oz gets its drivers direct from Canon INC so that's why we are a little bit earlier with some updates.

Single user is not able to print PDF files.

I have the following situation at our organisation for one of our users.
Printer:
Kyocera FS1030D
Kyocera KM-C3225
I have one user that is not able to print any PDF files in our network. (User Chris)
Printing a Word document or Notepad works fine.
To be specific:
The user is mainly using Windows 7 Pro 64 bits.
We also have a Citrix environment.
When this user is trying to print a PDF file we follow the following steps:
Open any PDF file.
Go to: File -> Print -> Select the printer to use.
Hit Print button.
Now the pop up comes up loading the PDF file to be printed. (The percentage bar)
After this bar disappears nothing happens.
The print que does not show on the bottom right hand of the screen.
If you open the printer que there is no document that needs to be printed.
We tested printing a PDF file on a different computer with user account Chris, but no success.
We tested printing a PDF file on the same computer with another user account, success.
We tested printing a PDF file in our Citrix environment (still on Chris his pc), success.
So as a wrap up: Printing with another user account works fine. The issue seems to be located in the user profile, but is not specific to a single computer.
We tested the following.
Print as Image setting.
Remove the print drivers and reinstalled them.
Renamed the Windows folders where the drivers are installed.
Removed Adobe Acrobat version 9 and installed version 10.
Any suggestions are welcome.

Hi Bill@VT,
Thanks for your reply. I have checked and the current installed version is 10.1.4. I tried updating but I get the message that the there are no new updates available.
Also I tried to find a 64 bits download but unfortunately I cannot find a 64 Bits install file.

Not able to Print Invoice thru Crystal Integration

Hi All,
Could anybody help me on the issue given below.
One of our client Issue while printing from crystal Integration in SAP Business One. I can able to view the crystal report through Crystal Integration but i am unable to print the document.No Error is getting displayed .If i am printing from PLD it's working fine .After exporting to PDF from crytal integration i can able to Print but not able to print directly from the crystal Integration.
Thanks,
Vishwanath

Vishwanath,
Please post your question in this forum ...
Reporting and Printing
Eddy

Not able to print in duplex

On this windows 7 PC, Since I upgraded from Acrobate Reader 8 to Adober 9 and reader10, I am not able to print in duplex mode. I works fine from another computer Windows XP using Adobe Reader 6.0 using the same shared and WiFi printers.
Looking at the document file property in the advance tab, in the print dialog preset window, I am not able to change the duplex mode from grayed "Simplex" to Duplex.
How do I fix this problem?
See screen print picture

Hi,
The HP Deskjet 2520 does not support automatic print duplexing and therefore any checkbox will not apply for such.
You may perform manual duplexng on Mac OS using the Pages to Print option as following:
From the file used to print click the File menu and select Print.
NOTE: The Print window might be minimized. Press on Show Details to show any available print option.
From the main drop does menu select Paper Handaling.
The main menu will usually list the program name (e.g. TextEdit).
Will appear as Copies & Pages within Microsoft Office applications.
Set the Pages to Print option as Odd Only, as well set the Page Order as Automatic and click on Print.
After the odd-numbered pages have printed, reload the paper with the printed side facing up and repeat the process above by setting the Pages to Print as Even Only this time.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Not able to print double sided or into the mailbox of our "Canon Image Press C1" anymore

Maybe someone can help me.
Yesterday I noticed, that I am not able to print double sided or into the mailbox of our "Canon Image Press C1" anymore (InDesign Version 6.0.4).
At the end of january I printed double sided the last time and it worked.
Right now, I can choose "double print", but the system does not keep it. I tried with different documents already and it didn't work, so it can't be just that one file. Since everything works out of other programs like Adobe Acrobat or MS Word, it can not be printer bug; it's pretty much my impression that it must be a InDesign bug.
So if somebody has any idea .... please help :-(
Thank you in advance
red witch

Sorry that I forgot about the operating system, but I am new so you may forgive me about that ...
I am working with a PC. Last week I was working in a document and suddenly the side window did not show the sides anymore. Our IT department took a file from my collegues PC and copied it to my PC, after this the sides where shown again. Since my colleque has got the same basic problem, I think something went wrong on the installation. I am not the expert with this installation stuff.
Bye
red witch

Not able to get the login page after installing 12.1.1

HI,
i am not able to get the login page after installing in the 12.1.1. when i accessed from client machineo.Please help me in fixing out this problem.
Thanks,
venkat.

Hi,
What is the OS?
What is the error message?
Any errors in Apache/Database log files?
Thanks,
Hussein

Not able to open adobe XI Pro after I have filled out a documents and trying saving it. The program stops working & won't open up again. Tried to complete a repair, rebooting nothing works. Help please.

Not able to open adobe XI Pro after I have filled out a documents and trying saving it. The program stops working & won't open up again. Tried to complete a repair, rebooting nothing works. Help please.

Hi,
Can you pls. provide more details of the issue?
OS/Platform
It would be great if you can provide the MSI logs for repair from the %temp% directory.
Thanks,

Not able to print PDF report from Oracle APPS

adcmctl.sh version 115.17.
We have a network printer HP Laserjet 4250 which is configured on our concurrent manager server of RH Linux OS. We are using HP LASERJET 4250 Postscript driver. We are able to print PDF's directly however through CC manager we are not able to print reports in Proper PDF format. Has anyone faced such an issue with Oracle Apps?

user11996936 wrote:
Has anyone faced such an issue with Oracle Apps?Maybe. Maybe not. Ask to the proper forum. Here you are in Peoplesoft forum.
Nicolas.

Not able to Print the report

Hello All,I am not able to print the report. When i click on the icon a blank form opens up. Is there something i need to do to see the form with some details.Thanksram 

Hi Ram, Can you give me some more details around your issue? How exactly are you building the viewer? Are you using the JSP Page Wizard that comes with Crystal Reports for Eclipse? If so, then can you tell me what application server you are deploying to? All of these pieces may help narrow down the issue. Regards, Sean Johnson (CR4E Product Manager) <a href="http://www.eclipseplugincentral.com/Web_Links-index-req-ratelink-lid-639.html">Rate this plugin @ Eclipse Plugin Central</a>

I am not able to activate my iPhone 3GS after upgrading it to IOS 5.1.1 since it shows the error message "your iPhone could not be activated because the activation server is temporarily unavailable. I am asked to retry after some time. How can I avoid thi

i am not able to active my ipone 3gs after upgrat to ios5.1.1. it show error message " your iphone could not be activted because the activation server is temperarily unavailable.try connecting you iphone to itunes to activate it, or try again in a couple of munutes" i retry many time, could not sold problem.

You had a jailbreak and unlock.
When you updated you cooked it.
Your phone is done.
Time for a new one.

HT4061 im not able to activate my iphone 3gs after upgrading to ios6, saying server not available, what i can do

im not able to activate my iphone 3gs after upgrading to ios6, saying server not available try later. im not able to make my phone work, not able to bring serial # im in guatemala what i can do?

Activation issues are almost always the result of a device that has been hacked or jailbroken.
If this is the case, no support can be provided here.

About 2 weeks ago, not able to print all pages in a .pdf document using internet explorer 11?

About 2 weeks ago, not able to print all pages in a .pdf document stored in a folder (I'm using Windows 7)?
It only prints 1 page then my Brother MFC-J4510DW Printer says "Please put another piece of paper in the feed slot"....the problem is the print setting is set to "manual mode" in Windows 7 rather than "general setting". If you try to change the setting to "general", it will not accept the change.

Hi.
I did try using the printParams feature and it worked, but since I need to be able to print sets of non-consecutive pages, I end up having to bring up the print dialogue multiple times and have the user set watermarks each time.
I decided to just create a new pdf in a temp directory containing the selected pages and open this document in a new window. This works well and allows them to use the print button on the window to print, bringing up the print dialogue just once. However, since I need to open the document in a way that shows the print button, I am using OpenInWindowEx, with AV_DOC_VIEW, and the option PDUseBookmarks or PDUseThumbs, rather than PDUseNone. This displays a toolbar which also includes icons for creating a new pdf, deleting pages, etc. I do not really want to include these icons on the toolbar. Is there a way to remove unwanted icons from the toolbar, or make them invisible?
Hope this makes sense. Thanks for your help.
Mary

Not able to print purchase order..

Dear All,
I am not able to print one import purchase order.
I have checked everything and also able to print another import Purchase orders..but particular this PO print out is not coming.
I have deleted message and again created the same..also condition record is maintained...
Not able to see print preview also (Not generating)
What could be the reason?
Please help..
Naren

Hi Naren,
try the note :111062.
[https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=111062]
Please check the setting mentioned in the note and revert.
Thanks,
Hrishi

Not Able To Print w/ Lexmark X2600 After Recent Airport Firmware Update

Similar Messages

Maybe you are looking for