Not able to print wireless

i have a 6700 HP all in one printer.
i run windows 7
i was able to print wireless after i installed the printer for a few days. now i am unble to print wireless. i recieve a unable to communitcate with printer.
ii have every thing the help web site has said to try.
the network test shows the printer is contected to the network.
i have not changed anything since i set up my printer.

Power on/off your printer, then pc. When you go to printers and devices does it show the printer as connected, and ready? Print a test page; I had the same problem, then viewed my network and re-applied the printer via IP address ---good luck! Let us know how you get along
ProBook 4710S, Win 8 Pro 32 bit, T6570 @ 2.1Ghz, 320GB, 3GB, ATI Mobility HD 4330
Elitebook 8440p Win 7 Enterprise x64, M520 2.4 Ghz, 250GB 4 GB, Intel HD Graphics

Similar Messages

Hp office jet 4315 i am not able to print wireless

I am not able to print wireless Only when wired

Hi,
Waht do you mean by print wirelessly?
As you may find by the product specification, it support USB connectivity only:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00615491&cc=us&dlc=en&lang=en&lc=en&product=113...
Connectivity: Available USB port and USB cable for direct connection.
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Epson Artisan 725 Arthic White - Not able to print wirelessly

I just got an Epson Artisan 725 and I'm amazed with the quality of the print job the downside is that even tough I have already done all necessary updates I'm still not able to print wirelessly. When I try to ad it on my printer's list I can not find it! Also, I realized that the manual of the printer is really poor on explanation and it is missing information about it.
I have a MCBP 15 running Mac OS X v10.6 wirelessly connected on a linksys router as the printer is also. The printer finds the wifi and connects to it susccesfuly but I still not able to find it!
If somebody can help me I really appreciate it!
Thank you in advance for any help!

I'd suggest going to the Epson website and checking/downloading the manual for your model; when I set up my Artisan 810, there were specific instructions on how to install it (both wired and wirelessly) - the wireless install included steps such as connecting it via a USB cable first and then disconnecting the cable at some point during the install process. Also, I had to enter the printer's MAC address on the router's website - if your model is similar to mine, you can get the MAC address by checking the setup settings on the LCD panel.

Why can't I print from my Mac book Pro to my HP Deskjet 3054A. I am currently able to print wirelessly from my old PC desk top but not the laptop

Why can't I print from my Mac book Pro to my HP Deskjet 3054A. I am currently able to print wirelessly from my old PC desk top but not the laptop

I am running Mac OS X Lion 10.7.3. I believe I have the lastes drivers. I bought the laptop and got the printer free with it in December. I was initially able to print from the laptop but now says there is no connection.

HP LaserJet M1536dnf cannot connect to internet but we are able to print wirelessly.

I connected our HP LaserJet M1536dnf MFP via USB to our Aiport Express... I was able locate and add it using the Print & Scan function in System Tools (and I am able to print wirelessly) but we cannot scan from our computers or use AirPrint.
I pulled up a Network Summary and it says it the Network Cable is disconnected. After reading some other users' feedback, I found a suggestion of using an ethernet cable, rather than USB, so I tried that - no change. Right now I have both the USB and ethernet cables plugged in... still no luck.
Worth noting (maybe?) - when reset the Airport, the light next to the Ethernet plug blinked a few times but then went out.
Seems weird that we would be able to print wirelessly while it says it's not connected but maybe these are two different things?
Help please, this is the third printer we've purchased in the last 2 months and I'd *really* like this one to work.

Sorry, it's my Desktop PC that the Router and Modem are connected with.
I went into the thing with my IP addy into internet explorer. I couldn't find where to change the IP and all the stuff with the IP seemed normal. None of them had the one that the router said it was operating on.
If I create a NEW umm channel, or whatever, will I have to redo the Laptop and my Xbox config wirelessly? I should note I had a friend install all of this router/wireless stuff for me, since I am nto good with this kind of thing. So, I'm not completely up on how to do all this stuff. I was gonna ask if he could do something but I haven't got the chance to talk to him, so I came to you guys.
That's where the situation stands right now. I just wanna make sure I'm not setting myself up for hours of work. I'm sure it's easy, since he didn't take too long setting it up. But I don't like messing with things that might screw up my system/modem etc beyond what it is already.

No longer able to print wirelessly

Hi
I have and iPhone 4S and an HP Photosmart 7510 printer and a Three Mifi. I used to be able to print from my laptop and iPhone to my printer with no problem - until I updated my printer. Now I'm unable to print from either wirelessly.
My iPhone detects the printer but when it goes to print it says the printer is offline - but it isn't.
I've set the printer to print using HPs email address and this works but I've tried using the HP app and it says it can't find the printer.
I'm confused.

jlcnyc0 wrote:
I have a Canon Pixma MP150 printer connected by usb to my iMac. I have a macbook networked (wireless) with the iMac (D-link router). Months ago - I USED to be able to print wirelessly from the macbook (maybe pre 10.5.x??? - not sure)but now when i try to print, I get the never ending message of "looking for printer". What happened??? Leopard update issue?
....and how can resume printing wirelessly.
Is your iMac's "Sharing" System Preference still set for printer sharing?

AX not able to print; host is "busy"

I have a new Airport Express connected via Ethernet to a router. The AX is configured in bridge mode because the router is handling NAT etc.
I have a printer connected to the AX, I connect wirelessly to the AX and can see and set up the printer. However, when I try to print, I get a "host busy" error. If I delete the printer and try to set it up again, sometimes it doesn't show up.
Through the Airport Setup Assistant, I can see the Airport but can't read the configuration. A hard-reset will let me re-configure it and set up the printer, but I'm not able to print.
I tried to to update the firmware (currently 7.2.1) but it just spins endlessly trying to find the firmware.
Can anyone help?

Check under "Additional information" near the bottom here (the AirPrint knowledge base article):
HT4356

I am not able to print via wifi printer

I HAVE SAMSUNG ML1866W WIRELESS PRINTER AND I AM NOT ABLE TO PRINT MY EMAIL ATTACHMENTS OR NE OTHER DOCS...... FROM MY IPHONE 4S.......

That printer is listed as airprint compatible - http://support.apple.com/kb/ht4356
Try the troubleshooting steps in that link to see if they help. Also, make sure the printer's firmware is up to date.

I am not able to print or to do a print preview with firefox 5. The problem happens with my Xerox Laser printer and also with Bullzip PDF printer. All prints are white with the printer and empty with the PDF printer.

I have a Phaser 6280DN and Bullzip (PDF virtual printer). They work perfectly with firefox 4 and with other application on my notebook running Windows Vista. But I am not able to print with firefox 5. All prints are white or empty. My notebook is a Dell Vostro 1710 with 3GB RAM and 500GB HD.

LytKT wrote:
We called the internet company and from their end everything was working.
Your ISP can only determine that their equipment is responding to ping requests. They can determine nothing about your equipment or if theirs is communicating with it.
Disconnect the Ethernet cable that comes from their equipment and connect it directly to a computer instead of the Extreme. If you can load web pages, it means your Internet connection is working. If not, it's not.
Is your ISP supplying cable Internet? Sometimes it is necessary to reset your ISP's connection by disconnecting their coaxial cable that connects to their modem. Literally unscrew it and leave it detached for a minute or so, then screw it back in again and power up the modem. They call this a "full reset". I don't know how it differs from simply powering down the modem, but I have confirmed that on rare occasions doing this will reset a recalcitrant connection.
... however the internet bars are present on the desktop and also indicated I was connected to the internet.
The Wi-Fi icon "bars" show that a connection to a wireless network has been established. It conveys no information about an Internet connection that lies beyond your local network. Option-click that menu and select "Open Wireless Diagnostics..." Authenticate with your Admin name and password and click the Continue button. Some useful diagnostic information and suggestions will result.

Error message 'System/Library/Extensions/AppleUSBEthernetHost' not able to print anymore

Possibly the source of the error message is: 'AppleUSBEthernetHost.kext' has not been installed properly and cannot be used. on my Mac Book Pro'13 early '11 is http://download1290.mediafire.com/5u5azohfzhgg/zo22n2u2eml78vc/AppleUSBEthernetH ost, http://www.mediafire.com/download/zo22n2u2eml78vc/AppleUSBEthernetHost - I cancelled the download, but I found it in my downloads.
Resulting that I cannot print any more wired and wireless. Please would you help to fix this problem at short term? Thank you.

Hi Domique,
Thank you very much for your answer. Yesterday I moved the file to the Trash and restarted the PC. Afterwards it didn't succeed to print.
Today (at lunchtime) I didn't find the file AppleUSBEthernetHost.kext at all on my PC. I did request a software update, but no updates were available.
I just (at dinertime) solved the wireless printing problem. By adding a new printer (my own printer) and gave it another name (extension of date of today). I did do this also yesterday, but it didn't solve both printing problems at all.
Now I am able to print wireless. I also looked again if the file AppleUSBEthernetHost.kext was on the system. Yes! It was at the right place System/library/extensions/. It's an old file of 16.05.2011.
The wired printing possibility is still UNSOLVED. Please would you help me to solve this problem too? Thank you very much in advance!

Not able to print PDF report from Oracle APPS

adcmctl.sh version 115.17.
We have a network printer HP Laserjet 4250 which is configured on our concurrent manager server of RH Linux OS. We are using HP LASERJET 4250 Postscript driver. We are able to print PDF's directly however through CC manager we are not able to print reports in Proper PDF format. Has anyone faced such an issue with Oracle Apps?

user11996936 wrote:
Has anyone faced such an issue with Oracle Apps?Maybe. Maybe not. Ask to the proper forum. Here you are in Peoplesoft forum.
Nicolas.

Not able to Print the report

Hello All,I am not able to print the report. When i click on the icon a blank form opens up. Is there something i need to do to see the form with some details.Thanksram 

Hi Ram, Can you give me some more details around your issue? How exactly are you building the viewer? Are you using the JSP Page Wizard that comes with Crystal Reports for Eclipse? If so, then can you tell me what application server you are deploying to? All of these pieces may help narrow down the issue. Regards, Sean Johnson (CR4E Product Manager) <a href="http://www.eclipseplugincentral.com/Web_Links-index-req-ratelink-lid-639.html">Rate this plugin @ Eclipse Plugin Central</a>

About 2 weeks ago, not able to print all pages in a .pdf document using internet explorer 11?

About 2 weeks ago, not able to print all pages in a .pdf document stored in a folder (I'm using Windows 7)?
It only prints 1 page then my Brother MFC-J4510DW Printer says "Please put another piece of paper in the feed slot"....the problem is the print setting is set to "manual mode" in Windows 7 rather than "general setting". If you try to change the setting to "general", it will not accept the change.

Hi.
I did try using the printParams feature and it worked, but since I need to be able to print sets of non-consecutive pages, I end up having to bring up the print dialogue multiple times and have the user set watermarks each time.
I decided to just create a new pdf in a temp directory containing the selected pages and open this document in a new window. This works well and allows them to use the print button on the window to print, bringing up the print dialogue just once. However, since I need to open the document in a way that shows the print button, I am using OpenInWindowEx, with AV_DOC_VIEW, and the option PDUseBookmarks or PDUseThumbs, rather than PDUseNone. This displays a toolbar which also includes icons for creating a new pdf, deleting pages, etc. I do not really want to include these icons on the toolbar. Is there a way to remove unwanted icons from the toolbar, or make them invisible?
Hope this makes sense. Thanks for your help.
Mary

Not able to print purchase order..

Dear All,
I am not able to print one import purchase order.
I have checked everything and also able to print another import Purchase orders..but particular this PO print out is not coming.
I have deleted message and again created the same..also condition record is maintained...
Not able to see print preview also (Not generating)
What could be the reason?
Please help..
Naren

Hi Naren,
try the note :111062.
[https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=111062]
Please check the setting mentioned in the note and revert.
Thanks,
Hrishi

Not able to print on Purchase order whatever we fill in item text

not able to print on Purchase order whatever we fill in item text, from where can we link to get printed item text on purchase order

while doing in quality whatever we fill in text in item details of p.o we are getting it printed on p.order
but same thing when we are doing in production we are not able to print on purchase order. where we should look out
for e.g in spro-mm-purchasing-purchase order..

Not able to print wireless

Similar Messages

Maybe you are looking for