Not able to print with an P1102 through a buffalo link station LS-QVL

Hi,
I've seen older posts on this subject which have not resolved my issue. The printer is visible and the PC (win 7 32 bit) sends the document to the printer, the doc disapears from the que, but never re-appears out of the printer. Full setup for print server on the Buffalo has been followed (p1102 driver in place), and previous post instructions also followed with no results. any ideas?
thanks

iPad printing Apps usually need a Mac on the network to enable the printing.
I have not seen any others, but someone else may have better info.
I use an HP App to print from my iPhone, but it does require a Mac on the network that can access the printer to work.

Similar Messages

Not able top print with elements 8

How do I print with elements 8? while attempting to print a message state only 200 dpi of the image will print. What am I doing that is causing this to happen?

jag213 wrote:
How do I print with elements 8? while attempting to print a message state only 200 dpi of the image will print. What am I doing that is causing this to happen?
You are doing absolutely nothing to warrant this to happen. 200 dpi could be the resolution of your printer. Most laser printers would print at 600 dpi but there were old ones that printed at 300 dpi or less.
Have you installed the latest printer drivers for your operating system? Windows 8 will inevitable require new drivers but you are not using it so this point might be not relevant.
DPI simply means Dots per inch when printing. Higher the better to get a sharper picture.

Not able to connect with Oracle server through VBScript without DSN

Hi
I have both Oracle9i and Oracle10g clients installed with local system.
I am able to connect to Oracle Database 11g Enterprise edition server though sqlplus through command prompt and also through AQT without any error.
As the server has lots of database ,whenever I connect to a particular database through sqlplus from command prompt,I connect as below
C:>sqlplus username/password@service_name
and it gets connected without any error.
When I am trying to connect the same database through VB Script,I am getting ORA-12560 TNS:Protocol Adaptor Error.
Below is the connection string I am using:
Database_String = "SERVER=xxxx.vvvn.Com;Driver={Oracle in OraHome92};DATABASE=service_name;user id=userid; password=passowrd"
I have installed a Oracle10g server in my local system and tried to connect the same way and I was successfully ,but its not working when the server is running remotely.
Does it make any difference with the version of driver being used ?Should I need to modify my connection string anyway.
Please help me as to identify the issue.Thank you very much in advance.
Regards
Sahina

check the listener status in server end,
lsnrctl status
lsnrctl servicesif not start
lsnrctl startThanks

I am not able to print with my hp 7350??

It recognizes the printer on my macbook pro and sets it up to print, goes through the printing, but nothing prints on the paper....and yes there is ink in the cartridge.:) Any help!! I know it's an older printer, but it works great with my OLD PC. New to the Mac world.

Dear sir,
Really something surprising. My instument is 'LakeShore DRC-93C'
temperature controller. Probably bought around 7-8 years back.
Here is the actual GPIB add & address read by MAX and correponding
three NI-SPY log.
actual GPIB add*****address read by MAX*****Max Capture(attached files)
25***** 9*****capture_1
21***** 5*****no file attached
20***** 4*****capture_2
17***** 1*****no file attached
10***** instrument not found****capture_3
7*****instrument not found*****no file attached
for first four cases MAX showed 'instrument did not reply to *IDN? query?
Same thing happened when I connected an Keithely Current Source.
(only one instrument is connected,)
actual GPIB add*****address read by MAX
8*****instrument not found
17***** 1
25***** 9
This means MAX is reading GPIB number 16 less than actual Number? Then I tried
to write command at both GPIB address(actual and read by MAX) but both didn't work?
What should I do next?
with best regards
Ram Shanker
Attachments:
Capture_1.spy ‏23 KB
Capture_2.spy ‏23 KB
Capture_3.spy ‏13 KB

I am not able to print or to do a print preview with firefox 5. The problem happens with my Xerox Laser printer and also with Bullzip PDF printer. All prints are white with the printer and empty with the PDF printer.

I have a Phaser 6280DN and Bullzip (PDF virtual printer). They work perfectly with firefox 4 and with other application on my notebook running Windows Vista. But I am not able to print with firefox 5. All prints are white or empty. My notebook is a Dell Vostro 1710 with 3GB RAM and 500GB HD.

LytKT wrote:
We called the internet company and from their end everything was working.
Your ISP can only determine that their equipment is responding to ping requests. They can determine nothing about your equipment or if theirs is communicating with it.
Disconnect the Ethernet cable that comes from their equipment and connect it directly to a computer instead of the Extreme. If you can load web pages, it means your Internet connection is working. If not, it's not.
Is your ISP supplying cable Internet? Sometimes it is necessary to reset your ISP's connection by disconnecting their coaxial cable that connects to their modem. Literally unscrew it and leave it detached for a minute or so, then screw it back in again and power up the modem. They call this a "full reset". I don't know how it differs from simply powering down the modem, but I have confirmed that on rare occasions doing this will reset a recalcitrant connection.
... however the internet bars are present on the desktop and also indicated I was connected to the internet.
The Wi-Fi icon "bars" show that a connection to a wireless network has been established. It conveys no information about an Internet connection that lies beyond your local network. Option-click that menu and select "Open Wireless Diagnostics..." Authenticate with your Admin name and password and click the Continue button. Some useful diagnostic information and suggestions will result.

I was able to print with my acrobat before, but I can no longer do it. the error message says "adobe creation cannot continue because acrobat is not activated" How do I activate it?

i was able to print with my acrobat before, but I can no longer do it. the error message says "adobe creation cannot continue because acrobat is not activated" How do I activate it?

I have the exact same issue. I can print one document and then I get the error mentionned above ("adobe creation cannot continue because acrobat is not activated"). Then I need to reboot in order to be able to print a new document.
I have suite and went to Photoshop as suggested, but this program is already activated. I tried to launch Acrobat Pro but it won't.
I'm using the Design and Web Premium CS6 Suite on Windows Vista.
Thank you so much for your help.

I am not able to connect with my Epson all in one printer

I am having Epson All in one printer which is being installed on my HP notebook. However, i am not able to print from this notebood as it says communication port is not available. I am able to scan, but can't able to print. My operating system is Windows 7 home edition. Please help me to resolve the issue.

What happens when you try?

Not able to print PDF report from Oracle APPS

adcmctl.sh version 115.17.
We have a network printer HP Laserjet 4250 which is configured on our concurrent manager server of RH Linux OS. We are using HP LASERJET 4250 Postscript driver. We are able to print PDF's directly however through CC manager we are not able to print reports in Proper PDF format. Has anyone faced such an issue with Oracle Apps?

user11996936 wrote:
Has anyone faced such an issue with Oracle Apps?Maybe. Maybe not. Ask to the proper forum. Here you are in Peoplesoft forum.
Nicolas.

Users not able to print local (frontend)

SAP users are not able to print LOCL (front-end). The error message found in SP01 is waiting for formatter. This is no dump on ST22 related to this problem. SM21 is clean as well. SM66 looks OK. There are plenty of spool work process in wait status (SM50). How to troubleshoot this problem?

Hello.
Is this an issue across all of the users?
The way i would look into this is first look at the user in SU01. Does the user have local as the printer default and is print immediately checked?
From there i would have a look at the spool using transaction SP01. Is this beginning to get full?
If it is just specfic users is there any differences with the SAPGui's to someone that it works with? Does the users have SAPLPD coming up? This often gives a better error than the spool. If it is what is the error.
Sorry if you have already looked into this but this is the process i always work through with printing errors
Kind Regards,
Emily
Edited by: Emily Needham on Jul 28, 2009 3:24 PM

Not able to Print the report

Hello All,I am not able to print the report. When i click on the icon a blank form opens up. Is there something i need to do to see the form with some details.Thanksram 

Hi Ram, Can you give me some more details around your issue? How exactly are you building the viewer? Are you using the JSP Page Wizard that comes with Crystal Reports for Eclipse? If so, then can you tell me what application server you are deploying to? All of these pieces may help narrow down the issue. Regards, Sean Johnson (CR4E Product Manager) <a href="http://www.eclipseplugincentral.com/Web_Links-index-req-ratelink-lid-639.html">Rate this plugin @ Eclipse Plugin Central</a>

About 2 weeks ago, not able to print all pages in a .pdf document using internet explorer 11?

About 2 weeks ago, not able to print all pages in a .pdf document stored in a folder (I'm using Windows 7)?
It only prints 1 page then my Brother MFC-J4510DW Printer says "Please put another piece of paper in the feed slot"....the problem is the print setting is set to "manual mode" in Windows 7 rather than "general setting". If you try to change the setting to "general", it will not accept the change.

Hi.
I did try using the printParams feature and it worked, but since I need to be able to print sets of non-consecutive pages, I end up having to bring up the print dialogue multiple times and have the user set watermarks each time.
I decided to just create a new pdf in a temp directory containing the selected pages and open this document in a new window. This works well and allows them to use the print button on the window to print, bringing up the print dialogue just once. However, since I need to open the document in a way that shows the print button, I am using OpenInWindowEx, with AV_DOC_VIEW, and the option PDUseBookmarks or PDUseThumbs, rather than PDUseNone. This displays a toolbar which also includes icons for creating a new pdf, deleting pages, etc. I do not really want to include these icons on the toolbar. Is there a way to remove unwanted icons from the toolbar, or make them invisible?
Hope this makes sense. Thanks for your help.
Mary

Not able to print reader file

When I convert MS Word files to Adobe Reader files, some people are not able to print them. Some of the content prints for instance, but some is missing. The graphics may print, but the text is missing.
Any ideas?
Thanks,
Brian

Thanks for the response Michael,
Here is a file I converted from Word to a PDF that will only print the graphics.
I am using Word 2007 and Adobe Reader 9 Pro. I have the CS4 suite. When I save, I am using the following parameters:
Convert Document Information
Enable Accessibility and Reflow with tagged Adobe PDF
Create Bookmarks
Convert Word Headings to Bookmarks
I should add that changing and eliminating these parameters make no difference.
Thanks,
Brian

Single user is not able to print PDF files.

I have the following situation at our organisation for one of our users.
Printer:
Kyocera FS1030D
Kyocera KM-C3225
I have one user that is not able to print any PDF files in our network. (User Chris)
Printing a Word document or Notepad works fine.
To be specific:
The user is mainly using Windows 7 Pro 64 bits.
We also have a Citrix environment.
When this user is trying to print a PDF file we follow the following steps:
Open any PDF file.
Go to: File -> Print -> Select the printer to use.
Hit Print button.
Now the pop up comes up loading the PDF file to be printed. (The percentage bar)
After this bar disappears nothing happens.
The print que does not show on the bottom right hand of the screen.
If you open the printer que there is no document that needs to be printed.
We tested printing a PDF file on a different computer with user account Chris, but no success.
We tested printing a PDF file on the same computer with another user account, success.
We tested printing a PDF file in our Citrix environment (still on Chris his pc), success.
So as a wrap up: Printing with another user account works fine. The issue seems to be located in the user profile, but is not specific to a single computer.
We tested the following.
Print as Image setting.
Remove the print drivers and reinstalled them.
Renamed the Windows folders where the drivers are installed.
Removed Adobe Acrobat version 9 and installed version 10.
Any suggestions are welcome.

Hi Bill@VT,
Thanks for your reply. I have checked and the current installed version is 10.1.4. I tried updating but I get the message that the there are no new updates available.
Also I tried to find a 64 bits download but unfortunately I cannot find a 64 Bits install file.

Not able to Print Invoice thru Crystal Integration

Hi All,
Could anybody help me on the issue given below.
One of our client Issue while printing from crystal Integration in SAP Business One. I can able to view the crystal report through Crystal Integration but i am unable to print the document.No Error is getting displayed .If i am printing from PLD it's working fine .After exporting to PDF from crytal integration i can able to Print but not able to print directly from the crystal Integration.
Thanks,
Vishwanath

Vishwanath,
Please post your question in this forum ...
Reporting and Printing
Eddy

Not able to print in duplex

On this windows 7 PC, Since I upgraded from Acrobate Reader 8 to Adober 9 and reader10, I am not able to print in duplex mode. I works fine from another computer Windows XP using Adobe Reader 6.0 using the same shared and WiFi printers.
Looking at the document file property in the advance tab, in the print dialog preset window, I am not able to change the duplex mode from grayed "Simplex" to Duplex.
How do I fix this problem?
See screen print picture

Hi,
The HP Deskjet 2520 does not support automatic print duplexing and therefore any checkbox will not apply for such.
You may perform manual duplexng on Mac OS using the Pages to Print option as following:
From the file used to print click the File menu and select Print.
NOTE: The Print window might be minimized. Press on Show Details to show any available print option.
From the main drop does menu select Paper Handaling.
The main menu will usually list the program name (e.g. TextEdit).
Will appear as Copies & Pages within Microsoft Office applications.
Set the Pages to Print option as Odd Only, as well set the Page Order as Automatic and click on Print.
After the odd-numbered pages have printed, reload the paper with the printed side facing up and repeat the process above by setting the Pages to Print as Even Only this time.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Not able to print with an P1102 through a buffalo link station LS-QVL

Similar Messages

Maybe you are looking for