Not able to publish project as a single swf File
Hello Captivate experts.
I have a problem publishing only one swf file with Captivate.
My project consists of three slides. The first one is a introduction Slide, the second and the third one only contain one swf each (swf that i also created with captivate).
These files are the files who always get published together with the main .swf. So after publishing I got three swfs instead of only one
I know that a topic like this has been discussed, especially because of the new feature of Captivate 4 wich allows to export only one file, but so far i haven't read anything about swf files that can not be included. (I only found that flash video can not be inserted into a single swf).
I realized that this problem only occurs with swf files created with captivate. Swf files created with Flash don't result in a septerated file.
Did anybody have this problem before? Does anyone know a workaround?
Thanks in advance
captiware
HI Captiware,
When you insert a swf, which was created from Captivate, as animation into Captivate and publish => the swfs are kept external. This is by design.
Manish
http://blogs.adobe.com/captivate
Similar Messages
-
In P6 version7 not able to copy project with the baseline.
Hi,
In P6 version 7 it is not able to copy project with the baseline. It copies only the schedule.
Please help.
regards,
Baber.Tried the solution from another thread but did not work completely (as warned) - the workaround didn't quite work for me either:
https://discussions.apple.com/thread/1398462?start=0&tstart=0
Ended up taking a backup, did a fresh install, created the account as the first one so that it gets the same UID as the other Mac (on which my account was the first) and restored my data - was painful but finally on track. -
Hello I am not able to published to the web using an FTP the test has a negative response I do not know what is required in Directory/path Protocol and port
If you use FTP then ftp is the protocol and 21 is the port.
Your webhoster will tell you what path to use.
You probably can read it in the FAQ/Help/Support pages where you host your website.
All difficult words are explained in manuals, dictionaries or wikis. -
The Urgent Change request is in created status and I am not able to assign project to it. Also I am not able to change the status of the change request to In developement with developer's Id. Everything works fine if i assign SAP_ALL authorization to the developer.
Below are the roles assigned to Developer ID -
SAP_CM_SMAN_DEVELOPER
SAP_SM_CRM_UIU_FRAMEWORK
SAP_SM_CRM_UIU_SOLMANPRO
SAP_SM_CRM_UIU_SOLMANPRO_CHARM
SAP_SMWORK_BASIC_CHANGE_MAN
SAP_SMWORK_CHANGE_MAN
SAP_SOCM_DEVELOPER
Z_S001
ZSAP_SOCM_DEVELOPER
Issue screen -
SU53 for Developer-
Please suggest which roles/Authorization should be assign to Developer Id.
Thanks
KavitaHi Kavita,
Copy these roles to Z-roles
SAP_CM_SMAN_DEVELOPER
SAP_SM_CRM_UIU_FRAMEWORK
SAP_SM_CRM_UIU_SOLMANPRO
SAP_SM_CRM_UIU_SOLMANPRO_CHARM
SAP_SMWORK_BASIC_CHANGE_MAN
SAP_SMWORK_CHANGE_MAN
SAP_SOCM_DEVELOPER
Assign this to user.
Put a stace using ST01.
Find that object and modify/add in your custom role.
Regards,
Divyanshu -
Users are not able to edit projects even with right permissions
Hello,
We have a weird issue. Your help or inputs is appreciated.
A user is not able to edit projects in SAP PPM 50 unless 1)the project is created by the user and 2)user has access to ACO_SUPER auth object. For the projects, the user is trying to edit, we made sure user has write ACL access in the administration tab of the project.
Obviously, we can't give all users ACO_SUPER access. Please advise how to proceed.
Thanks in advanceHi Pranith,
You are right..ACO_SUPER is not recommended for all users, it's an super user access.
In PPM-Project management, there are two authorizations
1) General Authorizations
2) Project Specific authorizations
General authorizations:
This is provided to user using a backend PFCG roles like 'SAP_CPR_USER' which contains business partner view access and other similar roles are assigned for project creation, template creation etc.,
Project Specific authorizations:
This authorizations are provided using ACL 'Authorizations' tab within the project and here you have different authorisation activities like admin, write, read & none.
As you said, the user who creates the project will get 'Admin' authorization and after that if you want give access to other users, then you need to add manually users in the project definition-authorisation tab or you can provide default authorization through project role type.
Have you added the users manually in authorisation tab?
Regards,
Ravi -
Flex project into a single SWC file!!
please help me with this problem:
i created an image gallery using actionscript 3.0 classes in Flash CS4...in one of the classes, i used a mask Movieclip to mask the thumbnails in the gallery...this mask movieclip is a rectangle Movieclip symbol in the library that is exported for actionscript...
in order to run my application in Flex 3, i did the following:
a. i placed the classes in a folder called "com"
b. i placed my assets (the images) in folder called "images"
placed both "com" & "images" folders in the "src" folder of my Flex project
c. i exported the mask movieclip symbol from the Flash library as a SWC file, and placed the SWC file in the "lib" folder of my Flex project
d. i dragged my custom component (image gallery) onto the stage
e. in the main MXML application file, i went to "Design Mode" and found my custom component under the "Custom" folder..i dragged the component on the stage
and my gallery worked fine!
now the problem happened when i tried to compile the WHOLE Flex project as a SINGLE SWC file...in order to compile the whole Flex project as a SINGLE SWC file, i did the following:
1. i created a new Flex Library Project
2. i placed my classes folder ("com") and my images folder ("images") in the "src" directory of the Flex library project
3. i went to Project --> Properties --> Flex Library Build Path -->
- on the "Classes" tab, i checked the ("com") folder which contains all of the classes
- on the "Assets" tab, i checked the ("images") folder which contains all of the images
- on the "Library Path" tab, i clicked the "Add SWC" button, browsed to my mask movieclip SWC file (that i created earlier from the mask movieclip symbol in the library in Flash CS4) and selected it
I then pressed Ok,and now a SWC file that represents my project was created in the "bin" directory of my Flex library project
4. I created a new Flex project, and in the "lib" folder i placed the SWC file that was created in the Flex Library project...in the main MXML application file, i went to "Design Mode" and found my custom component under the "Custom" folder..i dragged the component on the stage
BUT NOTHING DISPLAYS!!
so obviously there's a problem in "condensing" the whole project as single SWC file
could someone please help me!!
thanx a lotI am also facing same problem, when i am including librabry in application not able to see any image...............can you tell me the solution.................................thanks
-
Captivate 7 - How to publish into a single swf file?
Our Authoring tool has been designed to cater for Captivat swf files for video uploads. Now that we have upgraded to Captivate 7 the swf - is merely a 'holden cache file' the video content is saved in the .mp4 file. Our programmer tells us that it will take some time to reprogramme this. Is there a way within the Captivate 7 publishing settings to still create a .swf file which will be able to stream the entire video content when uploaded or to generate a single swf file with all content?
Thank you so much! We are trying superfast to adapt to all the different changes and really appreciate you input.
PeterOK, only solution I've found is to use a 3rd party program - try cutePDF.
Thanks for nothing HP! -
How to publish a single SWF file?
Hello, I need to know how can I publish a single SWF file
(like the EXE option).
I've tryied to publish many times, but the Captivate creates
many SWF files, including the skin.swf file, but this one I know
how to remove.
I'm using Captivate 3.0.
Thank you!Hi there
Given the date I'm sure it's something that got lost in translation during the forums upgrade.
See if the link below helps.
Click here
Cheers... Rick
Click here for Adobe Certified Captivate and RoboHelp HTML Training
Click here for the SorcerStone Blog
Click here for RoboHelp and Captivate eBooks -
I am not able to burn a cd from a video file.
I Mac OSXIC .6X
I am not able to burn a cd from a video file. Here is the message that I get :
" the disc can't be burned because the Device failed to calibrate the laser power level for this media ."
Can anybody help?
Thanks .Try using a different brand of CD.......
Failing that...
Your CD Writer may need servicing/replacing.... -
Video and skin in single swf file... sigh....
Hi all,
This may be an obvious one to some of you but I have been
tearing my hair out for several days and cannot find detailed
information on what I am trying to do anywhere...
I have a requirment to convert several short DV video files
to SWF so I can publish on a web page. The finished products need
to be a single SWF files.
Importantly they also need to include a control skin.
I have been trying to use both Flash CS3 and Captivate 3 to
do this with no success. (I have found info on how to do it with
Captivate, i.e. remove borders etc, but that presents some other
problems which I won't go in to here as it's a different topic)
Is what I am trying to do possible inside Flash ? Surely it
is?! Can I import a DV video, add a control skin and publish it all
as a single SWF ?
I believe there are shareware third party products that can
do this, but I really want to use Flash and I can't understand why
it appears to be so difficult. (unless I am missing something
obvious...)
So if anyone coudl help that would be fantastic, even if
that's just pointing me in the direction of some reading material..
Cheers.oconndav,
> Is what I am trying to do possible inside Flash ? Surely
it is?!
It is. :)
> Can I import a DV video, add a control skin and publish
it all
> as a single SWF ?
You can, but be aware that video -- especially sizable video
-- works
best when the FLV file is situated outside the SWF. I
understand that your
project requirements dictate otherwise, which makes this a
bit of a
challenge, but you can put everything into a single SWF. It
just means
you'll be building your elements by hand and will control the
video as if it
were a movie clip (that is, a MovieClip class instance)
instead of an
FLVPlayback instance or Video instance in conjunction with
NetConnection and
NetStream instances.
> I believe there are shareware third party products that
can do
> this, but I really want to use Flash and I can't
understand why
> it appears to be so difficult. (unless I am missing
something
> obvious...)
Well, again, heavy Video files aren't really designed to
play inside
SWFs. For whatever reasons Macromedia/Adobe chose, video is
ideally
designed to be controlled as an external asset.
In your case, you won't be able to use the FLVPlayback
component. You
won't even be able to use the older Media components or the
component-less
Video object solution. You'll import your video asset to the
Library, place
it inside a movie clip symbol (which will stretch to an
incredible length),
then place your movie clip on the Stage and give it an
instance name. Once
it has an instance name, you can refer to it with
ActionScript. The
MovieClip class entry of the ActionScript 2.0 Language
Reference (or 3.0, if
you're uasing AS3) will give you everything you need to know
(and can do)
with movie clips.
ActionScript will give you access to the total number of
frames of that
clip, as well as the current frame. You can tell the playhead
to go to any
of its frames, play, stop, etc. In this way, you can mimic
many of the
capabilities of the FLVPlayback component -- though with less
precision.
The "skin" of your video player will be determined by you
... by button
symbols for the buttons (or you could use movie clips), as
well as other
graphic elements. It's going to be a totally
built-from-scratch project,
and you'll have to program the buttons yourself. How would
you rate your
comfort level with ActionScript?
David Stiller
Co-author, Foundation Flash CS3 for Designers
http://tinyurl.com/2k29mj
"Luck is the residue of good design." -
Creating single .swf file without border causes control bar jump
If the goal is creating a single .swf file and the answer is
to simply uncheck the border checkbox, there's a small problem. If
there is a Captivate control bar -- in my case a full length
stretched one -- it will ride up and over the Captivate movie,
covering some of the movie. In my case the control bar is riding up
and over several buttons referenced in the project, screwing things
up considerably.
How can we keep the control bar from riding up -- or more
specifically perhaps being loaded over top of the project -- such
that it obscures part of the project?
Quick answers would be really fantastic!
Thanks!Thanks Paul,
That did work. I use a pretty stripped down control bar so
adding in 27 pixles works. A cohort mentioned that Captivate 1
required a similar work around -- though it only produced a single
file. It'd have been nice to have known before her co-worker.
It's too bad there's not some verbage somewhere -- maybe in
the help -- that explains that adding a control bar to an exisiting
project will result in the toolbar obscuring some of the project --
how much depending on the size of the control bar.
It'd be great to have a little checkbox that would allow the
project to expand the exact number of needed pixels so that the
project and control bar were nearly mated together.
To come full circle, after I've done this and gotten the two
together, I have to resize again -- this time down -- for my
project.
So after making it bigger to fit the control bar, I resize it
again to make it smaller, make adjustments to the text -- which
doesn't seem to scale -- and to the caption boxes that don't mate
exactly anymore and publish. What I found is that the file size is
now closer to the original "larger" project file.
I find this curious, as I was finding when the control bar
was on top of the project before learning this workaround that the
file size for a smaller resolution project was actually turning out
larger. That never made sense to me.
After the workaround, it's actually close to the same size.
Thanks for your help! -
So Wat to do? Is there any way to get out as a single swf file from captivate.
Dear friends,
I am beginner in Adobe Captivate. We have a E-learning
project. We are using Dockers as our LMS. Previously we were using
Flash for all. Now we are trying Captivate for better and faster
results. I have few swf files and i inserted al files in Captivate
and i published. So instead of getting single output, am getting
all the swfs, skin swf and html file. Html file is accessing all
swfs and works. But it is not working in Dockers. Single swf will
only work in Dockers. So Wat to do? Is there any way to get out as
a single swf file from captivate. please Help mee.
Thanks
FlashloverIf 'Dockers' cannot handle a .zip file as the content and
instead
requires a single, uncompressed content file, then it is not
SCORM-compliant. The SCORM specification requires the LMS to
handle a
'pif' file (most common is .zip) which contains the lesson
and the
required manifest file. If Dockers doesn't support that then
you can't
do SCORM-compliant content.
Erik
loverflash wrote:
> Dear friends,
>
> We are using
> Dockers as our LMS.
> So instead of getting single output, am
> getting all the swfs, skin swf and html file. Html file
is accessing all swfs
> and works. But it is not working in Dockers. Single swf
will only work in
> Dockers.
>
> Thanks
> Flashlover
>
Erik Lord
http://www.capemedia.net
Adobe Community Expert - Authorware
http://www.adobe.com/communities/experts/
http://www.awaretips.net -
samples, tips, products, faqs, and links!
*Search the A'ware newsgroup archives*
http://groups.google.com/group/macromedia.authorware -
How to use aggregator to create a single swf file from multiple files
Hi everyone,
I am working on the client's requirement where i have to create a SCROM 2004 based video. Its basically a PPT inside the captivate file. And it has around 175 slides in the file. Some of the slides have animations, voiceover. I am facing a problem during PUBLISHING the file into single SWF file format. Whenever I Publish the slides as SWF, it creates number of SWF files, Swf skin of the player and other manifest, Scorm 2004 files.
I want only one single SWF file in which every slide should be incorporated in it. Dont know, why it is happening? I tried aggregator for this also, but it didnt worked... The Skin.swf has been easily added and no other files are adding. It shows me an error: "Name.swf is not a AS3 Captivate file ....."
I am new to this. Please help me out as I have a very short deadline for this.
Thanks and RegardsMaybe you misunderstand: this is a user forum, not online help by Adobe staff.
Sorry, but if you are that impatient, you'll have to pay for online support. You post a question and expect to have answers within minutes?
Lilybiri -
Hi,
I have several mp3 files that I use in my Flash animation but I want to publish this animation as a single SWF file. Don't want the mp3 to be also made available along with the SWF. Can you please tell me how to do this ?
-ThanksSince I am not sure if your question was about security, you can use Sound and SoundChannel classes to stream mp3s at runtime.This way you don't need to include these files with your SWF and sound stream is more controllable.
There are many tutorials on how to do that, inclusing Adobe documentation:
http://www.adobe.com/livedocs/flash/9.0/ActionScriptLangRefV3/flash/media/Sound.html
http://www.adobe.com/livedocs/flash/9.0/ActionScriptLangRefV3/flash/media/SoundChannel.htm l
As for the security, DRM is a big expensive thing that is not affordable for the majority of us. In addition, there are tons of free stream sniffers on the web that extract media very easily. -
Export a fla as single swf files
Hi,
is there a hint or workaround how to export (save) all frames
of a FLA file
as single swf files (like
you can export a FLA in single JPG files)?
Would much appreciate if someone has a hint for me.
Thank you in advanve
PeterHi,
that hint does'nt help. The problem is that I want to have
all frames out of
one FLA file stored as SINGLE swf file.
Example: Source: test.fla with 5 frames exported to:
test_001.swf,
test_002.swf, test_003.swf ...
Any idea how to do?
Kind regards
Peter
"Chris Georgenes" <[email protected]> schrieb
im Newsbeitrag
news:e5f88q$83h$[email protected]..
>i may have missed your question - but this is a simple
File > Publish
>Settings question - you can also Export as SWF - so not
sure if you know
>this and are having problems? there are no work arounds
to this as it is
>very basic flash procedure. Please re-explain if i didn't
understand.
>
> ******************************************
> --> **Adobe Certified Expert**
> --> www.mudbubble.com
> --> www.keyframer.com
>
>
>
>
> lollipop wrote:
>> Hi,
>>
>> is there a hint or workaround how to export (save)
all frames of a FLA
>> file as single swf files (like
>> you can export a FLA in single JPG files)?
>>
>> Would much appreciate if someone has a hint for me.
>>
>> Thank you in advanve
>>
>> Peter
Maybe you are looking for
-
BAPI_PO_Change in SAP 4.7 not able to check version complete check box
Hello, Our requirement is to change the delivery date of one or more items in PO after PO release and print, We are using BAPI_PO_CHNAGE to change the delivery date which will run in background. As version management is active in our system, new ve
-
Does apple even make an external isight and if so can it be used in ichat instead of the built in isight?
-
I dropped my iPhone 4 while using it. When I picked it up, it would not turn on. I have tried charging it. I don't have the money to get it fixed right now. What am I supposed to do??
-
Hi I want to run a query on a table and display the results which will be multiple records in my table in a browser. E.g: String sql="SELECT * FROM Table1"; Statement stmt = con.createStatement(); rs = stmt.executeQuery(sql);
-
Blackberry Bold 9650 rebooting ?
Hello I am a bit new to this and have a question regarding my sons phone. This phone has always worked well with no problems. On Aug 1st we called Verizon and advised he was traveling to Europe. We chose to communicate via email when he was able to