Not able to put data selection condition in data selection tab of infopakag
I was loading data from data source as data mart ( export data sauce from ODS) to other ODS.
when I tried to do delta Initialization with data transfer , I am not able to put data selection condition in data selection tab of infopakage.
when I choose Full Update in Update tab . It enables data selection fields in data selection tab. and I could put the condition.
I have checked in transfer structure as well , the fields are marked for selection.
Please advice .
Please tell me what could be the reason for this problem
Ashutosh,
As you are doing delta upload the data selection tab will be disabled, if you want to do the selective load then you need to do init update with your selection.
When you do the full updtae then definitely the data selection tab will be enabled for all the objects.
Hope this helps...
*******Assign Points if it helps********
Thanks,
Gattu
Similar Messages
-
Why i am not able to put a pdf format on iBook from itunes?
I tried to put a textbook that is in pdf format in my iPod in iBooks but I am not able to put it there. As much as I try to sync it, it does not work. Why is it like that and what should I do?
I plugged my iPod with the computer, I opened iTunes, I clicked on Books at the top, I put my file there and I selected the books that I wanted to have in my iPod. Then, I clicked Sync. Afterwards, my older books were still there in the iBooks application in my iPod. However, the new book that I put was not there and I don't get why. What I mean by iBooks app is the application that I downloaded from app store and this is where I put my books and my pdf format files. However, I am not able to put this book.
-
Not able to put reason for rejection at sales order level.
Hi Gurus,
I have an issue where I am not able to put reason for rejection for line item in sales order. It gives error as please delete the follow on document purchase order line item number 10. I have already deleted the line item in purchase order. Then tried but did not work. Tried by deleting the purchase requision item also but it did not work.
Tried to undelete the item from PO and then again tried to put reason for rejection but it could no worked out.
Please guide me what can be the solution.
Regards
VinodAs far a I understand you created PO for line item
So first check whether GR is reversed or not for PO
Then mark this line item for deletion in PO and then in PR
Check if you have created any billing document for PO if so reversed that invoice
Also check if you have created any delivery for the Line item in sales order if yes then reversed the same
If you have Sales order related Billing, and if you have done billing reverse the same
If you have Delivery related Billing, and if you have done billing reverse the same
After reversing all docuemnts created for Sales order then only try to reject the line item
You can check table VBFA for document flow -
not able to put my music from itunes back in my ipod after intalling itunes 10 on a new computer, it does recognize my ipod but refuses te put music back after taking it all out ... help
From your Old Computer or its Backup... you need to Copy your ENTIRE iTunes FOLDER to your New Computer..
-
my phone went on switch off mode since yesterday and not able to put on again till now.
I am having the same problem.
-
Hey. When I put a blank cd into my computer nothing shows up. I am not able to put music on it. What should I do?
I have a disc that has this logo:
compact disc recordable cd-rI just tried what u said and it wasn't on ignore. Any other ideas?
-
How can I get my time machine to allow me to recover files again?
After upgrading MBA to OS X, the time machine still backs up the files; but, I'm not able to navigate within the time machine or select any folders or files for restore.
I've searched and can not find a solution to the problem that's being encountered.Yeap that all makes sense now.
Do you only have the current backup showing in the TM display?? Won't it fill in the rest?
Over wireless are you waiting for the indexing to finish.. ??
Previous backup may not show for a couple of hours.
Long short of it.. Mavericks version of TM is a pain.
Sometimes it is easier to completely ignore the TM backup and do the restore manually.
I have posted the details here. See if this helps.
Can't access old files on time capsule -
ST03N, i am not able to see today n previous day data
Hii All
In my ST03N, i am not able to see today n last day data, it shows me data upto last two day before data. plz tell me abt where i can check the retention period.
System Details:
SAP: ECC 6.0
DATA BASE: ORACLE 10G
OS: AIX5.3
SAP KERNEL:179
SAP_ABA: SAPKA70015
SAP_BASIS:SAPKB70015
ST-PI:2008_1_700
PI_BASIS:SAPKIPYJ7F
Already jobs:
SAP_COLLECTOR_FOR_PERFMONITOR
SAP_APPLICATION_STAT_COLLECTOR
SAP_CCMS_MAPPING_SCHEDULER
SAP_COLLECTOR_FOR_JOBSTATISTIC
and saposcol running fine.
Thanks
Amit Srivastava
BasisHi
You can refere this [Link|No system load data available; may help you
Regards
Uday -
I am not able to put in complected status in service desk
Hello,
I am not able to put in complected status in service desk message .
can i know the reson ?
Regards,
SwaroopHello Swaroop,
may be it is not activated.
Please confirm if you had used SLFN0001 profile while configurig service desk
try doing this,it willl help:
go to spro-SAP solution manager-advanced configuration-service desk-status profile-change status profile for user status-double click on SLFN0001-here all the status wil be there in german language just check this once and if possible send me the screenshot for this
now go back and double click on SLFI0001-just have a look at this and send me a screenshot if possible
Rohit -
My Ipad got wet in the rain. Unfortunately it was in my bag it was in sleep mode. Now i am not able to switch it off and it automatically selects different pages and Icons.What should i do. Please help
Solutions for wet iPad.
http://www.gazelle.com/how-to/ipad/ipad-recover-from-water-damage
http://www.knowyourmobile.com/appleiphone/ipad/ipaduserguides/701079/how_to_fix_ an_ipad_if_it_gets_wet.html
Cheers, Tom -
Not able login to DBA cockpit. Dropdown to select system is empty
Not able login to DBA cockpit. Dropdown to select system is empty.
Version :->
SAP IQ/16.0.0.807/140804/P/sp08.03/Enterprise Linux64 - x86_64 - 2.6.18-194.el5/64bit/2014-08-04 18:42:22
$ sh cockpit.sh --version
Cockpit Server 4 SP08 PL01
Build Type : release
Build Timestamp : 201405191326
Build Number : 5558
Additional information :->There is nothing to select in the drop-down menu under "System"
Please let me know whether there is any solution/workaround to resolve this issue.Hi
First of all, you need to check the hosts file on your client system.
hosts file has to include some information such as "host/ipaddress" and so forth..
In my case, I found out that the issue is related to OS System.
If I installed IQ16 SP08 on window 2008 R2 (English version) or added a package of english language.
And then I changed display language from korean to english.
I succeeded to log in to cockpit console.
And the cockpit related log files are helpful to investigate the root causes.
thanks
Gi-Sung Jang -
Windows 8.1 Pro - FTP.exe not able to put file to FTP Server
Hi
We have replaced our Windows XP environment to Windows 8.1 Pro. Now I have problem with sending files through FTP to very old devices. Devices are runninng FTP Servers. Each time I try to "PUT" file on Windows 8.1 I receive message after some time:
"Connection closed by remote host"
If I make the same on Windows XP file is stored on FTP successfully.
From Windows 8.1 I am able to upload software only via Filezilla, but I need command line solution like FTP.exe or ncFTP.exe (non of them are able to stor file)
I have observed in Wireshark, that ftp.exe sends about 80kB of data, waits for some time and then it stops.
Summary of my problem:
Source Appl
Destination
Status
Win XP ftp.exe
FTP Server upload ok
Win 8.1 ftp.exe
FTP Server upload failed
Win 8.1 ncFTP.exe
FTP Server upload failed
Win 8.1 filezilla
FTP Server upload ok (but no command line solution)
Win 8.1 environment:
- standard installation of Windows 8.1 with newest Microsoft patches
- firewall ports - opened for inbound and outbound traffic
- no antivirus
FTP Server on problematic devices:
- old FTP Server, transfer in passive mode
I need command line solution tu upload files. Now I am not able to upload 1500 devices as we don't have Windows XP anymore.
What I have observed, when I type "PUT file" it takes about 20-30 seconds to start transfer on Windows XP or through filezilla.
Is there any problem with timeout in Windows 8.1 when it transfer files to old FTP server (working in passive mode)?
Thanks and regards,
MarcinHi Marcin,
Here is a thread talking about Windows 8.1 and FTP, see:
Windows 8.1 and FTP problems
https://social.technet.microsoft.com/Forums/windows/en-US/db3793a6-2810-464c-af9a-522b05f51ba9/windows-81-and-ftp-problems?forum=w8itprogeneral
Further, I am currently checking on the issue, if more things found out, I will update here.
Thank you for your understanding.
Best regards
Michael Shao
TechNet Community Support -
Not able to connect N82 to pc in data transfer mod...
I am not able to connect N82 in data transfer mode( other modes are working fine) though i installed latest connectivity cable driver for N82. It says that it could not find any suitable driver(after search cd provided and online).
My current firmware version of N82(RM-313) is 10.0.046. Operating system is Windows Vista. Will the firmware update fix the problem or I have to contact customer care center?
Thank you for your support.
mlhpr
Solved!
Go to Solution.22-Mar-2008 02:51 PM
scoobyman wrote:
Hi mlhpr
If phone is set to 'data transfer" mode on user interface and USB plugged into PC N82 behaves as a Windows USB mass storage device and you are saying that Windows Vista can't recognize this?
Ya thats is what the problem is. As you said the phone was to behave like USB pendrive in data transfer mode but i am getting this error.
:I first connected the N82 with cable Nokia CA-101 provided with handset and selected the data transfer mode. Then the windows(Vista) icon would appear in task bar showing windows is installing the driver. Then a window pops up saying driver not found and requests permission to search online for driver. When I choose search online for suitable driver, it searches for a while and says no driver found. (net is working prefectly fine). The icon disappears from the bar and phone is inaccessible from windows explorer. But USB indicator on mobile screen is active until i disconnect using mobile connectivity settings.
Actually i wanted this mode for installing the Nokia Maps which requires the phone to be in data transfer mode.
mlhpr -
Extraction problem - selection conditions for data load using abap program
Hi All,
I have a problem loading data over a selected period where the selection of date range is done using ABAP routine (type 6). Here though in the request header tab in monitor screen i'm able to see the selection date range populated correctly, no records are being extracted. But if i delete the abap filter and directly give the same date range for selection we are able to extract data. if any body has faced similar problem and have a solution for it please help me with yur suggestion.
Thanks,
nithin.It seems the the data range is not properly set in the routine.
You can check the value of selection period generated by routine in the data selection tab-> execute button is there .
Click it to to test the selection values generated by the ABAP routine..
If the value here seems correct one then paste the code of the routine that u have written with brief logic details that u have applied.
Sonal..... -
Not able to "put" in dreamweaver
New to this forum...Thanks...
Although I'm able to cut and past my html files via the
ftp.domain.org windows, I'm not able to do so through the "put"
command after I've saved changes to html pages. I've tested the
connection which seems to work fine, but nothing happens when I
select
"put"
RandyIt's always better when you figure it out yourself!
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"RandyRichards" <[email protected]> wrote in
message
news:e5ah9b$q0b$[email protected]..
> Murray,
> Thanks to your question, I took a look at the remote
server info and no
> wonder
> it didn't work. Sorry to trouble you. I've since set the
definitions
> correctly.
> I'm sure you noticed the error in my setup in the REMOTE
SERVER section.
>
> Sorry to trouble you, but thanks for getting me to look
at the settings
> more
> closely and figuring it out!
>
> Randy
>
>
>
Maybe you are looking for
-
To simplify my life, (hah) I changed my apple ID and password so that entering that information would be easier on my new 4s. I did this after I activated my phone. Now all my apps still think I use the old email address and refuse to accept my passw
-
Merging two or more separate Pages documents into a single document
Hello everyone... I have written a book as a bunch of separate Pages docs. I want to compile these together as a single document that I can edit and paginate. Therefore, I don't want to convert to PDF format, since I wouldn't be able to do any editin
-
No sound from earphones on iPad 2, iOS8.02
I Do not get any sound when I plug in headphones into my iPad 2. Speaker works fine.
-
New S6 and can't change language
Brand new phone, had hand on screen when i turned it on and it went to French, I can't change it as I don't speak French
-
How do I disable Firefox with out un installing
There are times I need to use explore and not Firefox how do I stop Firefox from interfering. In other word disable firefox