Not able to put delivery completed indicator in scheduleing aggrement
Hi ,
We are unable to put delivery completed indicator in scheduling aggrement . We are geting following message and its common scheduleing aggremnt and material don't have any stock and sub contracting order . Still what the point s we need to check in this case .
"Delivery completed" indicator cannot be set for item 00010
Message no. 06 848
Diagnosis
You have set the "delivery completed" indicator for a stock transfer item.
System Response
You can only set the "delivery completed" indicator in stock transfer items if
the sum of the goods issue quantities in the supplying plant equals the sum of the goods receipt quantities in the receiving plant
the sum of the delivery note quantities is equal to the sum of the goods receipt quantities.
Procedure
Cancel the "delivery completed" indicator."
RB
Is there an old/any STO pending.(Plant to plant delivery) of that particular item....
like Completion of stock transfers with GI qty > GR qty scenario....
plz check and revert back,if there is one plz close it and then put indicaor in SCHLD AGREE...
Similar Messages
-
Change Button Not Active even after Delivery Completion Indicator is Remove
Hi ,
In SRM 5.0 ,Change Button Not Active even after Delivery Completion Indicator is Removed for Completed PO to cancel the GR or make changes.
Thanks & Regards,Hi,
Please check these notes.
Note 1267916 - PO item flags do not stay checked
Note 1174982 - Return/deletion of confirmation does not update the PO flag
Thanks
Zameer -
Delivery completed indicator is not coming in PO
Dear All,
I have two users A and B
In A user I am not abl to see delivery completed indicator in PO while is user B I am able to se it.
There is no screen varient used and also have not done any personal settings.
Regards,
GiteshHi,
Normally for service POs delivery completed indicator is not reflected,
please check if your looking for service PO & normal PO by mistaken,
regards
chenna -
Delivery Completed Indicator for Services
Hi Guys
In PO's, in the delivery tab, the Delivery Completed Indicator appears only for Stock PO's. Is it possible to make the Delivery Completed Indicator appear for non stock PO's as well, I mean for services?
ThanksHi,
It is not possible to setup Delivery Completed Indicator For Services Purchase orders or Non stock Items.
Reg,
Ashok
Rewards welcome. -
Delivery completed indicator wrt Mat document & P.O
Hello
why is it that at times the
"Delivery completed indicator of the material document not set "
while the "Delivery completed indicator of the purchase order item" is set.
can anyone explain the logic behind this ?
ThanksHi,
Delivery completed indicator in the PO is set manually at the time of PO creation.
After GR if the quantity of GR is equal to PO quantity then it will be set automatically. Indicating that you cannot expect further GR for the PO item.
Regards
Ravi shankar. -
Not able to do GR for PO's , Delivery Completion Indicator Not Ticked
Hi ,
In SRM 5.0
Users Not able to do GR for PO's eventhough Delivery Completion Indicator Not Ticked , having Confirmation Roles
Either the PO is not appearing in the List or when they click the confirmation icon , the screen is not taking to the next screen to enter the quantity.
What all must be the probable reasons.
Thanks & Regards,Hello,
You can check following things,
1. User in the PO should be correctly assigned in org without any sync errors(check users_gen)
2. Check in PO if the Confirmation/services performed tick is assigned properly.
3. Check if the PO in SRM and backend is correctly synchorinzed with PO in Ordered status.
4. Finally if there is any existing confirmation for the PO, then they can create the next confirmation only after the earlier conf is synchronized with backend, which means it would depend upon your schedule of clean_reqreq_up report.
Regards,
Sanjeev -
Delivery Completed Indicator Not Displaying in Purchase Order Screen
Hi,
Here clinet system has 2 document types for service orders. In one type of service order I can see the delivery completed indicator checkbox in purchase order screen & in other type of service order I am not able to see the delivery completed indicator chekbox.
I have checked the screen layout for both purchase order types & assignement of layout to both order types. In both screen layout types I found that Delivery Completed Indicator Checkbox as Optional Entry. System should display delivery completed indicator in both type of Purchase Order create/change/display screen. Then why it is showing in one type of service order and not in other type of service order.
Awaiting your reply.
Regards
PradipHi Pradip,
You check the for your document type which field selectio is assigned in config
spro-MM-Purchasing-purchase order- define document types
And then go to
spro-mm-purchase- purchae order-Define Screen Layout at Document Level
select the field slection which is assigned to your document type and then go details and then double click the GR/IR and then select it as optional if it is selected as hidden.
Cheers
Chris -
Delivery completed indicator not working..
HI SAP expers,
some purchase orders not getting chick mark of Delivery completed indicator ater receiving goods
i have PO with 100 qty . then GR 100 qty . but its not taking in the purchas eorder
Delivery completed indicator not check automaticalley. i did all the configuration in spro-mm-inventory-GR-indi extt...
most of th ePO or getting but some POs or not getting.. is there any settings behind MATERIAL MASTER or any .?
Regards,
Anthyodaya.Try the following config..
1. Set Delivery complete indicator at plat leve
spro - mm --inventory mgmt -
Goods receipt -
Set delivery complete indicator
2. COntrol field selection for MIGO to disable users from changing it.
spro --> Materials Mgmt --> Inventory Mgmt --> Settings for enjoy Transaction --> Field Selection for MIGO
set field : "Del.Completed" Ind. GOITEM-MIGO_ELIKZ to Display -
Delivery completed indicator is not tick on generic article
Hello Expert,
I create a normal purchase order with generic article and variants.
Then, I do goods receipt with full quantity.
Delivery completed indicator is automatic set 'X' on variant items.
But with generic article, Delivery completed indicator is not set 'X'.
Do I miss any configuration ?
Please help me !
Regards,
MinhHi Minh,
as far as I know, this is a normal system behaviour and not an error or missing configuration.
The generic article in the goods receipt has a statistical character. No goods receipt can take place for the generic article. The goods receipt only takes place for the variants of the generic article and so the delivery completed indicator only gets set for the variants and not for the generic article.
Hope it helps.
Regards
Tobias -
Delivery completion indicator not working
Hi ,
I am giving delivery completion indicator in the delivery tab of the PO thru ME22N and saving the PO . After that when I am trying to do GR it is allowing me to do GR. It is is not stopping me from doing goods receipt even after giving delivery completion .
Please help . HOw it can be sorted out.
Regards
NandiniHello nandini,
It is std SAP functionality. The Delivery completed indicator will Indicates that the item is to be regarded as closed.
The delivery complete indicator will just remove the said PO item from the open PO list. It will not object from further goods receipt if we try to do. The PO - line item whihc is marked as complete will not appear in any std open PO reports (ME2M / ME2L / ME2N with selection parameter as WE101).
If you dont want the users to make further GR to the PO, what you can do is that, mark the PO - item as delivery completed and also block the PO line item in Me22n. (Select the line item and click the lock icon)
Regards
Gregory Mathews -
"Delivery Completed" Indicator in Goods Receipt
Hi,
While doing GR, we want to check the "Delivery Completed" on the Goods Receipt Screen if we are expecting no future receipt against the Purchase Order.
Currently we are not able to check the Delivery Completed Indicator as it is not in editable mode.
Is there any issue if we enable the Check Box on Goods Receipt Screen. If no, how can we enable the Check Box.
Please guide.
Regards,Hi
This is handled by the system automatically. you can change only in purchase order.
Refer SAP note 1093582 for more info
About delivery completed indicator functionality
The purchase order item is considered closed, even though the total
quantity may not have been delivered.
o Although a further delivery is not expected, it is still possible.
o At the time of the next goods receipt, the system suggests the item
as unselected.
o The purchase order item can be deleted, even if the total quantity
was not delivered.
Although the "delivery completed" indicator is not set, a purchase order
item is still considered closed if the full quantity has been delivered. In
this case, the "delivery completed indicator" is not required.
In Customizing for Inventory Management/Goods Receipt/Set Delivery
Completed Indicator, you can define at plant level that the "delivery
completed indicator" is set automatically in the order if:
o the total quantity was delivered
o the underdelivery or overdelivery lies within the tolerances
Hope it helps
Thanks/karthik -
Delivery completed indicator in PO
Hi team,
What's the significance of delvirey completed indiocator in PO. Even if i choose this, able to do GR with MIGO.
I hope my question is clear. Kindly respondHi Prasad
When u tick delivery complete indicator system will not consider that Po as Open Qty. which u can check in MMBE stock overview
Where open Qty is reduced..u can check this
first try to check stock w/o delivery complete indicator
And then after ticking Delivery complete indicator
( Note that here PO balance qTY SHOULD BE more than 1)
As the PO is not closed, system allows you to do GR for the rest of the quantity.
If u don't want system to allow pass GR once indicator is ticked u need to delete line item
Hope this will clear ur doubt
revert for any clarification
Vishal... -
Delivery Complete Indicator in PO
Dear Experts ,
I have manually ticked the delivery complete indicator in the delivery Tab in the PO .
I had ordered 100 qty . Did the gr for 50 & now i dont expect any delivery.
But when i try to do a GR against the PO ,the system still allows to proceed & shows 50 qty as open for GR .
Why should it be so ?
As i have marked the delivery complete indicator , the system should not allow mw to do any further GRs .
Pls give ur inputs
Regards
AnisHi
Please note that delivery complete indicator is meant for making the open order quantity as 0 so that during MRP run it should not consider the PO for the planning purpose, but still PO is open for balance quantity.
If you wish not to do any GR for that PO, then in PO itself you need to ammend the quantity as 50 so that system will automaticaly put delivery complete and no GR can be done further.
Rgds
Srini -
Prevent GR with the delivery complete indicator set in the purchase order
Dear friends,
During GR reference to PO, if goods are received partially and the delivery complete indicator is set, the PO line item is deemed to be closed.
However, if reference is made again to the same PO line item, GR can still be done to the item that delivery complete indicator was set.(due to there is still quantity to be received)
Is there anyway, we could prevent reference to be made to a PO line item that has delivery complete indicator set?
Thank you.
Regards.it is by design that you still can receive material.
See SAPs explanation here:
http://help.sap.com/erp2005_ehp_04/helpdata/EN/a5/63343943a211d189410000e829fbbd/frameset.htm
The delivery complete indicator only reduces the commitment values to zero.
If you want restrict further good receipts, then you have to reduce PO quantity to equal the received quantity and must not allow overdelvivery. Further you can enter a latest GR date, which will not allow receipt beyond this date.
Locking the item will as well prevent further actions, but this should only be a short term solution, because the PO will still be considered in MRP runs and will never treated as beeing closed. And you will not be able to archive such POs -
"Delivery Completed" Indicator in Purchase Order
Hi,
While doing GR, we want to check the "Delivery Completed" on the Goods Receipt Screen if we are expecting no future receipt against the Purchase Order.
On SDN & SAP Note, I got to know that we canu2019t tick the "Delivery Completed" Check Box while doing Goods Receipt.
We have implemented the Release Strategy on the Purchase Order. To tick the "Delivery Completed" Check Box, we need to cancel the Release Strategy.
Is there any other way (T Codes) to achieve the same?
Regards,Even you flag Delivery Completed" Indicator in Purchase Order, system still allows GRN for open Qty.
Use MEMASSPO trxn & Put Deletion indicator for the PO Line Item. So that you can not do GRN for the open Qty of PO line item.
Check
mass setting of delivery completed indicator
Maybe you are looking for
-
[SOLVED] Suspend to ram / disk not working in newer kernels
Hi all, this puzzles me for a while: My desktop system was able to suspend to ram / disk flawlessly in older kernels. It stopped working with 3.3. The suspend seems to work, the machine goes to standby. But when I try to resume, the machines is on bu
-
How to run DB13 in a Distributed System with Linux+Oracle
Hello all, We have a ERP system which runs on Distrbuted environment(APP server and DB runs on different hosts), OS and DB is RHEL 6.5 and Oracle 11.2.0.3, ECC6.0 EHP7 runs on Netweaver 7.4 now we would like to backup the database, to run brtools via
-
Need a formula to calulate multiple cells and add the sum total to a cell in a other table
Im a chef and my monthly inventory is a time consuming task. I get invoices from multiple suppliers on each day of the week. I enter them into a spread sheet and then need to add the sum total for all the invoices for say MONDAY. That total needs to
-
i forgot the answers to my security questions for my itunes account on my computer and now i can buy anything can somone just tell me how to do the rescue email I read the thing that itunes sent to my but does not tell you how to to set a rescue emai
-
Hi, I have a windows cluster SAP R3 4.7 with oracle 10.2. I have implemented backup with brtools 7.0 with split copy, using split_cmd command to split filesystem and post_split_cmd to start sap. Bac Brbackup finish successfully but with the warning: