Not able to Read All the Message in the Topic
Hi Al,
i am new to JMS. I have implemented publish-subscribe model. Topic as a destination.
I want to read all the message available for particular topic. is there any way to get this?..
like in the Queue, QueueBorrower used to read all available messages in the queue.
Thanks
Raj
It depends on what you mean by "what messages are available on the topic".
if you want to know what messages would be delivered to a new consumer on the topic, then you can simply create a consumer yourself. Each messages on a topic is delivered to all subscribers, so by creating a consumer yourself you won't be interfering with the delivery of messages to other consumers. (That's not possible with queues which is why the queue browser is provided).
If you want to know what messages are "persisted in the topic" then there's not really such a concept. Messages sent to a topic are only persisted in individual durable subscriptions created for individual clients. If there are no durable subscriptions when messages are not persisted. The JMS APi doesn't provide a way to browse the messages saved in an individual durable subscription. It could, but it doesn't.
Nigel
Similar Messages
-
SPD WorkFlow is not able to read all the column values
So quick run through of what is going on so far and the environment set in place.
Number of Environments: 2
Environment Details:
Dev: One front end server, One App Server, One SQL Server,
Production: Two Front End Servers, Two App Servers, One SQL Server,
We have a InfoPath form made in InfoPath 2010.
After making the form, it was published to the dev site with all the needed property promotions in place. It was than attached to a library, and than a workflow was made using SharePoint Designer 2010. When the workflow initiates when CreateBy value is not
empty. The workflow works fine and all the columns promoted from the form are read and placed in the email and set to end user.
when we move the same form to Production side, what happens is that the workflow reads certain properties and skips certain properties. So when the end user receives the email it is missing information that has been filled out in the form.
Just to confirm is all the values were being saved to the library properly, i went to modify view under the library tab at the top of my SharePoint library. Opened the view settings and checked off each of the properties that were promoted from the InfoPath
form (refereed to as site columns on the SharePoint side). All the columns that were filled out show the values that were either chosen or entered by the user (check box, text box, drop down, people picker). But the WorkFlow does not pick up all the values.
lets say we have the following:
We have: TextBox A for First Name
TextBox B for Last Name
TextBox C for Location Name
Dropdown 1 for Division Name
Dropdown 2 for age
People Picker for requester name
What happens is that when the user receives the email it will have the only the first name, last name, have the location missing, the division would there there, but the age would again be missing.
This is really confusing as to why it would be happening. It works fine on the Dev side, but screws up on the Production side.
Below is what the library looks like with the information populated.
same names are referenced in the workflow.It depends on what you mean by "what messages are available on the topic".
if you want to know what messages would be delivered to a new consumer on the topic, then you can simply create a consumer yourself. Each messages on a topic is delivered to all subscribers, so by creating a consumer yourself you won't be interfering with the delivery of messages to other consumers. (That's not possible with queues which is why the queue browser is provided).
If you want to know what messages are "persisted in the topic" then there's not really such a concept. Messages sent to a topic are only persisted in individual durable subscriptions created for individual clients. If there are no durable subscriptions when messages are not persisted. The JMS APi doesn't provide a way to browse the messages saved in an individual durable subscription. It could, but it doesn't.
Nigel -
i get an error message saying "system overload, the audio engine was not able to process all the required data in time (10011)
The thing is, that error message has been appearing when playing/recording a track that was running perfectly a few minutes ago and nothing has changed!
That can mean, that your project is too ambitious for your Mac. Are you using many complicated automations on that track?
4GB memory is not much, when doing audio processing. GarageBand will need all memory it can get, or will be forced to continually swap pages to your disk, to free RAM, and that can cause this error.
When this error occurs, it is best to restart the computer. This will free your RAM. Close all other applications that are competing for memory, i.e. other multimedia applications, and Safari.
Also, make sure, that you have plenty of free disk space. Don't let the free disk space drop below 20G.
Where is your project located? On an external drive or your internal drive? If it is on an external drive, connect this drive directly, not daisy-chained, or move the project to your internal drive.
I got up to eat, came back and tried to continue but GarageBand shuts down and displays that message every time I try to run the song. I've also recently run songs with several more tracks than this one and they worked perfectly. Any tips?
Are your other projects, that worked perfectly, still working? -
Not able to download all the rows to excel sheet from alv grid display
Hi experts,
I am not able to download all the rows which are displayed in alv grid display for some material numbers.
for some materials i am able to download, i used two ways to download 1) from icon(local file) on grid 2) menu list->export.
i checked in debugging till selecting the spread sheet pop up window, i am able to see all the data in internal table.
Can you suggest me what will be the problem....
thanks in advance,hi sandeep,
sorry for didnt specify clearly.
note: EX: "asaasdada in this sentence i said " this symbol is special character not the text.
building final internal table code
CALL FUNCTION 'CS_BOM_EXPL_MAT_V2'
EXPORTING
capid = p_capid
datuv = sy-datum
ehndl = '1'
mktls = 'X'
mehrs = 'X'
mmory = '1'
mtnrv = p_matnr
stlal = '1'
stpst = 0
svwvo = 'X'
werks = p_werks
vrsvo = 'X'
TABLES
stb = i_stb
EXCEPTIONS
alt_not_found = 1
call_invalid = 2
material_not_found = 3
missing_authorization = 4
no_bom_found = 5
no_plant_data = 6
no_suitable_bom_found = 7
conversion_error = 8
OTHERS = 9.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
i_stb1[] = i_stb[].
IF NOT i_stb1[] IS INITIAL.
SORT i_stb1 BY idnrk.
DELETE ADJACENT DUPLICATES FROM i_stb1 COMPARING idnrk.
SELECT bmatn ematn FROM ampl INTO TABLE i_ampl
FOR ALL ENTRIES IN i_stb1
WHERE bmatn = i_stb1-idnrk AND
datuv LE sy-datum AND
datub GE sy-datum.
SELECT
matnr
bwkey
verpr
stprs
bwprh
FROM mbew
INTO TABLE i_mbew
FOR ALL ENTRIES IN i_stb1
WHERE
matnr EQ i_stb1-idnrk AND
bwkey EQ i_stb1-werks.
IF NOT i_stb1[] IS INITIAL.
SELECT matnr werks beskz
dzeit webaz plifz
ekgrp
INTO TABLE i_marc
FROM marc
FOR ALL ENTRIES IN i_stb1
WHERE matnr = i_stb1-idnrk
AND werks = i_stb1-werks.
SORT i_marc BY matnr werks.
ENDIF.
CLEAR i_ekpo.
CLEAR i_vend.
IF NOT i_stb1[] IS INITIAL.
SELECT ebeln ebelp matnr werks loekz aedat
netpr peinh
INTO TABLE i_ekpo
FROM ekpo
FOR ALL ENTRIES IN i_stb1
WHERE matnr = i_stb1-idnrk
AND werks = i_stb1-werks.
SORT i_ekpo BY matnr ASCENDING
aedat DESCENDING
ebeln DESCENDING
ebelp DESCENDING.
IF NOT i_ekpo IS INITIAL.
SELECT k~ebeln k~lifnr l~name1
INTO TABLE i_vend
FROM ekko AS k INNER JOIN lfa1 AS l
ON k~lifnr EQ l~lifnr
FOR ALL ENTRIES IN i_ekpo
WHERE ebeln = i_ekpo-ebeln.
SORT i_vend BY ebeln.
ENDIF.
ENDIF.
ENDIF.
i_ampl1[] = i_ampl[].
IF NOT i_ampl1[] IS INITIAL.
SORT i_ampl1 BY ematn.
DELETE ADJACENT DUPLICATES FROM i_ampl1 COMPARING ematn.
SELECT matnr mfrpn mfrnr FROM mara INTO TABLE i_mara
FOR ALL ENTRIES IN i_ampl1
WHERE matnr = i_ampl1-ematn.
ENDIF.
SORT i_ampl BY bmatn.
IF NOT i_stb[] IS INITIAL.
SELECT stlty stlnr stlkn stpoz idnrk potx1 potx2
INTO TABLE i_stpo
FROM stpo
FOR ALL ENTRIES IN i_stb
WHERE stlty = i_stb-stlty
AND stlnr = i_stb-stlnr
AND stlkn = i_stb-stlkn
AND stpoz = i_stb-stpoz
AND idnrk = i_stb-idnrk.
SORT i_stpo BY stlty stlnr stlkn stpoz idnrk.
ENDIF.
LOOP AT i_stb INTO wa_stb.
READ TABLE i_marc INTO wa_marc
WITH KEY matnr = wa_stb-idnrk
werks = wa_stb-werks
BINARY SEARCH.
IF sy-subrc = 0.
wa_outtab-beskz = wa_marc-beskz.
wa_outtab-dzeit = wa_marc-dzeit.
wa_outtab-webaz = wa_marc-webaz.
wa_outtab-plifz = wa_marc-plifz.
wa_outtab-ekgrp = wa_marc-ekgrp.
ENDIF.
READ TABLE i_ekpo INTO wa_ekpo
WITH KEY matnr = wa_stb-idnrk.
IF sy-subrc = 0.
wa_outtab-netpr = wa_ekpo-netpr.
wa_outtab-peinh = wa_ekpo-peinh.
READ TABLE i_vend INTO wa_vend
WITH KEY ebeln = wa_ekpo-ebeln
BINARY SEARCH.
IF sy-subrc = 0.
wa_outtab-lifnr = wa_vend-lifnr.
wa_outtab-name_sup = wa_vend-name1.
ENDIF.
ENDIF.
READ TABLE i_stpo INTO wa_stpo
WITH KEY stlty = wa_stb-stlty
stlnr = wa_stb-stlnr
stlkn = wa_stb-stlkn
stpoz = wa_stb-stpoz
idnrk = wa_stb-idnrk
BINARY SEARCH.
IF sy-subrc = 0.
wa_outtab-potx1 = wa_stpo-potx1.
wa_outtab-potx2 = wa_stpo-potx2.
ENDIF.
READ TABLE i_mbew INTO wa_mbew
WITH KEY
matnr = wa_stb-idnrk
bwkey = wa_stb-werks.
IF sy-subrc IS INITIAL.
MOVE:
wa_mbew-verpr TO wa_outtab-verpr,
wa_mbew-stprs TO wa_outtab-stprs,
wa_mbew-bwprh TO wa_outtab-bwprh.
ENDIF.
wa_outtab-matnr = p_matnr.
wa_outtab-posnr = wa_stb-posnr.
wa_outtab-stufe = wa_stb-stufe.
wa_outtab-idnrk = wa_stb-idnrk.
wa_outtab-ojtxb = wa_stb-ojtxp.
wa_outtab-menge = wa_stb-menge.
wa_outtab-meins = wa_stb-meins.
MOVE: wa_stb-zzitem_draw_no TO wa_outtab-zzitem_draw_no.
IF wa_stb-upskz = 'X'.
SELECT * FROM stpu INTO TABLE i_stpu
WHERE stlty = wa_stb-stlty AND
stlnr = wa_stb-stlnr AND
stlkn = wa_stb-stlkn AND
stpoz = wa_stb-stpoz.
ENDIF.
LOOP AT i_stpu INTO wa_stpu.
wa_outtab-upmng = wa_stpu-upmng.
wa_outtab-ebort = wa_stpu-ebort.
wa_outtab-uposz = wa_stpu-uposz.
CONCATENATE v_ebort wa_stpu-ebort INTO v_ebort
SEPARATED BY space.
ENDLOOP.
MOVE strlen( v_ebort ) TO v_len.
MOVE: 0 TO x,
128 TO y.
DATA : lt_tab TYPE TABLE OF swastrtab.
DATA : ls_tab LIKE LINE OF lt_tab.
DATA : lv_ebort TYPE string.
CLEAR lv_ebort. CLEAR lt_tab.
MOVE v_ebort TO lv_ebort.
CALL FUNCTION 'SWA_STRING_SPLIT'
EXPORTING
input_string = lv_ebort
max_component_length = 128
TABLES
string_components = lt_tab
EXCEPTIONS
max_component_length_invalid = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
IF lt_tab[] IS NOT INITIAL.
LOOP AT lt_tab INTO ls_tab.
CLEAR lv_ebort.
MOVE: ls_tab-str TO lv_ebort.
CONDENSE lv_ebort.
MOVE lv_ebort TO wa_outtab-ebort.
APPEND wa_outtab TO i_outtab.
CLEAR:
wa_outtab-matnr,
wa_outtab-posnr,
wa_outtab-zzitem_draw_no,
wa_outtab-ojtxb,
wa_outtab-menge,
wa_outtab-meins,
wa_outtab-uposz,
wa_outtab-upmng,
wa_outtab-verpr,
wa_outtab-stprs,
wa_outtab-bwprh,
wa_outtab-lifnr,
wa_outtab-name_sup,
wa_outtab-potx1,
wa_outtab-potx2,
wa_outtab-netpr,
wa_outtab-peinh.
* wa_outtab-idnrk.
ENDLOOP.
ELSE.
APPEND wa_outtab TO i_outtab.
ENDIF.
CLEAR v_ebort.
CLEAR: wa_stpu.
REFRESH: i_stpu.
LOOP AT i_ampl INTO wa_ampl WHERE bmatn = wa_stb-idnrk.
READ TABLE i_mara INTO wa_mara WITH TABLE KEY matnr = wa_ampl-ematn.
IF sy-subrc = 0.
LOOP AT i_outtab INTO wa_outtab
WHERE
idnrk = wa_stb-idnrk AND
flag NE 'X'.
wa_outtab-mfrpn = wa_mara-mfrpn.
wa_outtab-mfrnr = wa_mara-mfrnr.
SELECT SINGLE name1 FROM lfa1 INTO wa_outtab-name1 WHERE lifnr = wa_mara-mfrnr.
MOVE 'X' TO wa_outtab-flag.
MODIFY i_outtab FROM wa_outtab
TRANSPORTING mfrpn mfrnr name1 flag.
EXIT.
ENDLOOP.
IF sy-subrc <> 0.
CLEAR:
wa_outtab-matnr,
wa_outtab-posnr,
wa_outtab-zzitem_draw_no,
wa_outtab-ojtxb,
wa_outtab-ebort,
* wa_outtab-idnrk,
wa_outtab-menge,
wa_outtab-meins,
wa_outtab-uposz,
wa_outtab-upmng,
wa_outtab-verpr,
wa_outtab-stprs,
wa_outtab-bwprh,
wa_outtab-lifnr,
wa_outtab-name_sup,
wa_outtab-potx1,
wa_outtab-potx2,
wa_outtab-netpr,
wa_outtab-peinh.
wa_outtab-mfrpn = wa_mara-mfrpn.
wa_outtab-mfrnr = wa_mara-mfrnr.
SELECT SINGLE name1 FROM lfa1 INTO wa_outtab-name1 WHERE lifnr = wa_mara-mfrnr.
APPEND wa_outtab TO i_outtab.
ENDIF.
ENDIF.
REFRESH i_stpu.
CLEAR i_stpu.
ENDLOOP. CLEAR: wa_matnr1, wa_mfrnr, wa_outtab.
ENDLOOP.
Edited by: srinivasareddy j on Mar 9, 2011 7:16 AM
Edited by: srinivasareddy j on Mar 9, 2011 7:20 AM -
i have updated my ipad yestarday sicne then i am not able to open any application on my ipad2. some of the application able to open in the page and not able to open all the applications in the second page. Does any one got this type of issue? any suggestions?
This problem has been reported a few times. The solution is to install any new App say a free one. This seems to fix whatever has gone wrong.
-
Well im not able to updated all the events I had in the imovie, HELP
Well im not able to updated all the events I had in the imovie, HELP
I have started preparing a small Database application
using JDBC with Swing.
I want to dispaly all the Table names which are
present in the Access Data Source. When i used the
Standard query for this "Select * from Tab" as in
SQL, an eror saying that "not able to resolve symbol
'Tab' ".
Can anybody please help me out to display the table
names?That query
Select * from tabwould work only for Oracle, as far as I know. There is no system table called Tab in Access.
***Annie*** -
Not able to export all the rows into excel
Hi All,
I'm not able to export all the records in discoverer report to excel sheet.
There are actually 27000 records in discoverer report, when i export them to excel sheet i can see only 16000 records.
I'm using discoverer plus.
Any suggestions...please share with me.
Thanks in advance,Hi,
Do you have parameters on the worksheet? if so then are you selecting same as when you ran it?
What version are you using ? Plus? Viewer? Desktop?
You can export the worksheet into CSV instead of XLS and see what you get.
Also check other formats to see if this missing lines happen in all export methods or just the XLS. -
Not able to download all the stubs using the WSDL provided for Contact.
Hi All,
I am using wsdl2java to download stubs from the wsdl for contact using axis.
But i am not able to download all the files from the wsdl.
I am not able to see ListofContactData.java file in the stubs created,but i a can see in the that in wsdl.
Anybody can help me in this issue.
Thanks & Regards
Amith B NHi Guys..
please post the solution clearly. I have the same problem and have to complete the development in short span..
Please mates.. Hope u ppl will help on time.. if possible.. send me the document.
refer my build.xml which i used for Version 1.0 in the below link.
Re: wsdl v2.0 vs V1.0
My mail id : [email protected]
Regards
Balaji Tr. -
Not able to see all the SAP tables from CR 2008
Hi All,
1)I am not able to see all the SAP database tables(DEV server) from Database expert menu in CR 2008. Only tables those start with alphabet letters upto A & B are visible. I checked the database connection>right click>options> found no filters as well.
We are using the CR 2008 trial version with SAP ECC.
2) When i am trying with Production Server of SAP ECC, I am not able to logon to the SAP from CR 2008. It is giving error message
as : LOGON FAILED : User USER1 has no RFC AUTHORIZATION for function group SYST
Please help me to resolve these. Thanks in advance.Thank you very much ingo.
You helped me a lot.
One more question, when I am trying for SAP database connections say for ex: 10.57.410.70, again and again some times the connection is getting saved in my connections with as new versions/variants like
10.57.410.70_1 or so. How to overcome this.
Thanks in advance ingo
Badari -
Not able to see all the records thru RSA3.
Hello All,
I am checking 0VALUATION_TEXT extractor on R/3 using RSA3 Tcode.
It is showing only 3 records.
When I am loading this Text Master data through InfoPackage, the records were loaded from R/3 to PSA itself is 6.
Why I am not able to see all the records in RSA3.
Kindly Help me out in this.
Thanks,
GeethaHi Geetha,
Check the data, It seems loded data was 3 records for 2 languages.
In RSA3 it is showing 3 records for EN language.
Assign points if it helps...
Regards,
ARK -
Users not able to see all the default reports in FDM under analysis
All,
Users in FDM are not able to see all the default reports which will be available under Analysis. I have checked the MenuNavigation and MenuNavigationItems under object maintainence in FDM which have "ALL" as the provisioning level. I am not sure where the issue is as the users still not able to see the reports. Please advise if there is something that can be done in workbench.
RegardsYou can set security on Report folders in workbench. You would go to the report tab in workbench, and right click on a Folder (Cannot do it on the individual report, it has to be on the folder), and you can assign security levels to the report folder. There are some in here that default to the admin level but you can override it.
Regards
JTF -
Not able to get all the results if i use "get-spdeletedsite" command
Hi everyone,
I am not able to get all the results when I use the below powershell command.
get-spdeletedsite -limit all
It is giving me only one site, but infact we have more than 100 deleted sites.
If I use the normal command like below it is giving the below output
get-spdeletedsite
Can any one tell me, how can I get all the deleted sites ?
Best Regards
Anil AlladiHi Anil,
For the Limit parameter of Get-SPDeletedSite cmdlet, when we specify its value to ALL, it will return all site collections for the given scope.
For your scenario, the script “Get-SPDeletedSite –Limit ALL” will return all deleted site collections in your SharePoint environment.
If you want to get all deleted site, you can export the result to csv as below:
Get-SPDeletedSite | export-csv out.csv -notypeinformation
Reference:
http://technet.microsoft.com/en-us/library/hh286316(v=office.15).aspx
Best Regards,
Eric
Eric Tao
TechNet Community Support -
Are you aware that probably Google mail, has interfered in Lightbeam's page size ?
I am no longer able to see all the Graph Sign's in the centre of the page because they are now in majority, so almost completely, vertical down the horizontal line. ( although, Reset Zoom level is adjusted to 100% )
Can you reset the page size for me, and also the Graph Logo's back to the centre of the page again. Please.
At the same time:
My touch screen now, from my laptop, is extremely more Sensitive for Static load of my hands, resulting in trouble during the writing process, ... because, now the writing cursor, jumps away unexpected if my hand comes near to the Touch Screen.
It triggers my temper, ... Please, can You help me out here ???
Small history:
After I used the possibilities of blocking several Direct and In-directs followers of my personal Internet activities, it is Google Mail, who is in War with me now, and inside Gmail I am no longer able to sign out.
Because Gmail lay out is partly out of service.
Thank You all for your cooperation.
Jan MinkIt is possible to reset the zoom size.Have you tried [[Font size and zoom - increase the size of web pages|Firefox's zoom feature]]? This will help increase the size of web pages.
* To make things bigger, press '''Ctrl''' and '''+''' at the same time.
* To make things smaller, press '''Ctrl''' and '''-''' at the same time.
* To reset the size back to normal, press '''Ctrl''' and '''0''' at the same time.
You can also use the [https://addons.mozilla.org/en-US/firefox/addon/2592/ NoSquint]. add-on to change the default zoom level for all websites at once. After setting your global zoom level, you can still fine-tune the zoom on individual sites.
'''Using NoSquint:'''
#After installing NoSquint, make sure you have the Add-on Bar displayed:
#*Right-click the new tab button ("+") or a blank area of the tab bar to the right of it and choose Add-on Bar from the shortcut menu.
#Click the % on the Add-on Bar to call up site preferences, then click the Global Settings button, then the Zooming tab.
#*You can experiment with sizes larger than 125%, but it's not recommended that you go higher than 150% unless you have a large high-resolution monitor.
If there are particular sites that still present a problem, feel free to post their URLs.
Please let us know if this helped you!
Thank you. -
FBL3N Report -not able to get all the transaction code details
Hello,
when FBL3N report ran for one the expenses account (time paid off - project charges account) , only few line items are displaying the transaction code like CJ88 and CJ8G.
can you please tell me why all the line items are not showing the transactions codes and is there any know situation when the T- codes are not displayed.
What I need to do, to get all the T- codes in the report ?
I really appreciate your help.
Regards
RadhaI know it is a line item report and I was expecting to see the transaction code details in the report for every line item. But in I'm not able to see all T- codes for all the line items
Thanks
Radha -
Not able to see all the application components in BI
Hello Friends,
Basically, we should be able to see all the application components(when you select 'datasources' under 'modeling' in RSA1) in bi which contain different datasources in them, example:
App components
+Financial Accounting
+Controlling
+Sales & Distri
i am not able to view any of the above App components in BI.
Could you pls help me out ...
Thanks,
SriniHi,
These data sources not activated in the source system in SAP and you need to go to t-code RSA5 and activate them manually after selecting them.
I think its "Activate data source" option.
Create a TR for this if asked.
once activate you need to replaicate them in BW and then you can see if they are coming or not.
Also it is possible that you are looking at the wrong source system.
in the data source option in RSA1 look for SAP option and the right client and then see if these data sources are appearing or not.
Thanks
Ajeet
Maybe you are looking for
-
AppBuilder:how to update data in a json file
Hello I have built an android hybrid app with AppBuilder whitch retrieves data from a json file. How can i refresh the json file with new data? Is there any way to update the apk file in a device after new data entry in json? Any information is appre
-
i recently bought a new computer and installed itunes and downloaded music already... I want to sync my new music into my ipod but it wont let me it says my ipod is linked to another itunes library, so If i want to go ahead with the process it says i
-
Saving PDF files after opening in Firefox from the web?
When I open a PDF file from my credit union it displays as an HTML document. When I try and save it, it also is an HTML without an option to save it as PDF. IE works fine in this situation. I have selected to open the PDF file in a separate Adobe X w
-
my friend gave me an 80GB iPod classic, because it wont start up anymore. i have tried everything and nothing works. i reset it and a white apples pops up with a gray background, then after a few seconds it changes to another screen that tells me to
-
I've seen a few other people who have also had this issue, and their problem turned out to be some kind of camera flex thing, or a main logic board. I have an iPhone 5C iOs 8. I get that weird error message when trying to turn my phone on, after it r