Not able to reconnect to wifi

I have my 3rd iPhone 5 replacement and it has stopped connecting to my home wifi. All the other devices in the house do. I have tried the airplane mode trick, I have tried to cellular data trick, I have tried everything on this site to try and fix it but nothing seems to work...any suggestions...PLEASE! Im tired of going to the apple store and getting my phone fixed/replaced...

I guess seeing as you have tried everything then these articles will not help you
http://support.apple.com/kb/TS1398
http://support.apple.com/kb/ts1559

Similar Messages

Not able to connect to wifi wpa2 networks in lenovo vibe x2

Not able to connect to wifi wpa2 networks in lenovo vibe x2. It displayed saved.but not connecting. It connects to open and WEP wifi networks. Please help

Are you trying to connect to a 2.4GHz or a 5GHz network?
What encryption is your router set to use : AES,TKIP/AES,..?
Have you tried to unplug the router from the power source for 2-3 minutes->Plug it back in-> Wait until it establishes an Internet connection-> Try to recreate the phone connection.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as ''ACCEPT AS SOLUTION"!
Unsolicited PM's will not be answered! ....Please post your question/s in the appropriate forum board.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

TS1398 My phone is not able to find any wifi networks.

My phone is not able to find any wifi networks.
I have another i phone and it is connected just fine, my ipad and computers are conneted just fine.
I followed apples directions but still not working.
It stopped working around december 5th.

Thats odd unless its a Windows 9x system lol. You shouldn't need drivers for USB storage devices. They are designed to identify themselves as Mass Storage class devices which will run with the built in drivers after Windows 98. Occasionally you will get a device that have deliberately been designed to not meet the standards (for extra features) but you saying this happens with other USB devices says this isn't the case.
Does it only happen with storage devices? Like hard drives, flash drives etc?
The model and windows version shouldn't make much of a difference in this case but it doesn't hurt to know what kind of system you are using.
Look up the USB controller in your system, if there are drivers for that, download them. If it's an already Windows supported device there is no need to download anything for it (have your Windows disc handy if you use XP) then uninstall the USB controller from the Windows Device Manager using the option to remove the drivers as well if the option is there. Restart and let Windows find the USB controller and install it (and any other devices attached to the USB bus). You may find your keyboard, mouse and any other USB devices won't work until Windows has finished installing them. Just give it some time, Windows will get there.

JLaunch not able to reconnect in HA environment

Hi,
Jlaunch is not able to reconnect to DB after failure in our HA (High availibility) environment. Error we get is Caused by: java.sql.SQLException: ORA-01033: ORACLE initialization or shutdown in progress. This error can be neglected as it is known that database is stopped during failover and is restarted again. I guess this issue can be solved by setting Java reconnect parameters right. Can someone let me know what parameters do we need to set to configure JLaunch or JControl reconnect in a HA environment.
Thanks

Hi Jorg,
Database, ABAP and Java are clustered in our environment. We are NOT using enqueue replication. During failover the ABAP part comes up fine. But JAVA does not start, main reason being JLaunch fails to reconnect to DB. Do you happen to know of any parameters that is related to Java reconnect.Else if there is any other solution to this issue apart from enqueue replication could you pls let me know.
Thanks,
Joel
Edited by: Dcruz Joel on May 15, 2008 8:16 PM

WiFi is disabled, i am not able to on my WiFi my version is IOS 6.1.2 latest version. Please help me how to fix this.

WiFi is disabled, i am not able to on my WiFi my version is IOS 6.1.2 latest version. Please help me how to fix this.

see this support article:
http://www.apple.com/support/iphone/wifi/

WiFi is disabled, i am not able to on my WiFi my version of IOS 6.1.2 latest version. Please help me how to fix this.

WiFi is disabled, i am not able to on my WiFi my version of IOS 6.1.2 latest version. Please help me how to fix this.

see this support article:
http://www.apple.com/support/iphone/wifi/

I have iphone 4s , I'm not able to join any wifi, I have tried all the methods, resetting, trying different wifi and many others , but still not able to join any wifi , what shall I do?

I have iphone 4s , I'm not able to join any wifi, I have tried many things, resetting, trying different wifi and many others , but still not able to join any wifi , what shall I do?

Contact iTunes support. Nobody here can help with billing problems.

Not able to connect to wifi

hi over there,
I just bought curve 9220 and started using it with wifi at home, unfortuantely it keeps saying "not able to connect to network" or " Failed to get an IP address".
Can anyone give me the solution to this pllzzzzzzzzzzzzzzzzz

I'm sorry, but what I requested was that you provide her all of the steps you conduct to attempt any connection, and all of the specific results from each step. For instance, first you go to Manage Connections, then what happens at that point? And what's the next step you take, and it's result? Step by step please, so that we can understand exactly what you are doing, and please include complete error message text if any.
Thanks.
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

I just upgraded my iPad mini to the new retina display. Until today I was able yo connect to my home Wifi. Now suddenly I am not able yo connect to Wifi. What should I do.

Could someone hp me why I am not able yo connect to my home wifi. I was connected until 2 hours ago. Now I am unable yo connect.

Hello, Nanjos0103.
Thank you for visiting Apple Support Communities.
Sometimes a simple power cycle of your wireless router can resolve this issue. However, troubleshooting may be needed. Here is the best troubleshooting article to go through when experiencing this issue.
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Cheers,
Jason H.

WLAN not able to connect to WIFI k3 note

Dear MY WIFI was connecting earlier, but now it is not connecting. Though WIF network is identified. When selected and given passowrd it not able to connect.model K50T5android ver 5.0BUILD VER = vibeui_v2.5_1512_5.495.1_ST_K50-T5. Need genuine and urgent solution. Regards

Hi
That is a corportate office network so i won't be able to see the ip settings and all for this wireless network.
Chandu Singh
Chandu Ramabharathi
Finland

I am not able to print via wifi printer

I HAVE SAMSUNG ML1866W WIRELESS PRINTER AND I AM NOT ABLE TO PRINT MY EMAIL ATTACHMENTS OR NE OTHER DOCS...... FROM MY IPHONE 4S.......

That printer is listed as airprint compatible - http://support.apple.com/kb/ht4356
Try the troubleshooting steps in that link to see if they help. Also, make sure the printer's firmware is up to date.

HP C4780 - not able to connect to wifi

Hi
My printer (HP C4780) doesn't seem to try to connect to anything while running configuration software. I tried to follow the procedure of restarting it (removing power cords waiting - I gave it whole night off).
I have full details of my wifi network because I configured it by myself, it's standard WPA wifi, I tried to chaning channel to 11 to help software to find the printer but none of this worked.
I downloaded the newest drivers from HP site for Mac and PC ( I have access to both , tried on both same result ).
Printer is able to print if I configure it to use USB only (I wanted it to by wifi but it never worked), but after uninstaling everything and trying to install again with wifi it asks to connect to USB at some point - so I did it, it finds the printer without problems and then it goes to network setup wizard and it doesn't find any networks - I put my SSID manually and when I hit next it says the printer must be connected to USB (it's connected I even tried to take a break and restart it at this point ).
Also the screen on printer always shows HP logo and progress bar that slides to infinity - I left it for 3 hours and still like this. No amount of restarts helps. But if you connect it to USB system can see the printer. Not sure if that's how it's supposed to work, the only time it was different was when I first turn it on and when through the setup procedure (setting language, cartridges and so on).
Let me know what to do - seriously restarts won't do...
Thanks,
Jedrzej

Would you be kind enough to help our effort here in HP to understand this failure? We have seen a rash of C47XX printers lock up on network installs with the HP logo on the front panel. We have not yet found a solution to the problem.
It would help us immensely if you could let me know the serial number and firmware revision of your printer. Both of these will be on a Network Config Test that is printed from the front panel of the printer (Setup [Scan] > Network).
Thanks in advance.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Windows 8.1 not able to reconnect after user accepts Gateway logon message

I spent all morning troubleshooting a connection problem with a client. It turned out that the TS Gateway message prompted to users on first login was the culprit or rather the option to NOT display the message again.
When "Do not ask again..." is select a user entry is written in registry HKEY_CURRENT_USER\Software\Microsoft\Terminal Server Gateway\Messages
If the entry was present the client was unable to login again, when I deleted the entry and only accepted the terms but skipped the "Do not ask again..." the user is able to login again and again.
Now I need to troubleshoot why this is happening. Any ideas?
Client: Windows 8.1
TS Gateway: Server 2012
Terminal Server: Server 2008 R2

Hi,
Is there any error message when the client cannot connect to the RD gateway?
Also, please check if there is any related information in the Event Viewer of both client and server sides.
Thanks.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Not able to connect to wifi using iPhone 4 with OS5, sees the network but won't connect.

Recently upgraded my iPhone 4 to the OS5 and I keep having sporadic issues with connecting to my home wifi, it sees the network but never connects. I turned of Location Services and Cellular Data for that had worked sometimes, but now it just keeps spining and never connects. I tried to reset network settings, reset my wifi router and reset my phone and nothing, it will connect at my church for example and other places but not at home. I have MAC addressing security set on my router and I verified my iPhone MAC address is authorized. Any other suggestions?

Try restarting your router first, turn it off for a minute then back on. then go to settings on your phone, then wifi, tap on the blue arrow to the right of your wifi 's name, then tap forget this network. Then go to the home screen, Then hold the home and off button down until the apple symbol comes up. Then go back into wifi and try to connect.

IPhone 3G upgraded to IOS 4.1, not able to search any WiFi routers

My iPhone 3G upgraded to IOS 4.1 and no longer able to search or connect to any WiFi access points, tried both reset Network settings and All settings but no help, any brothers encounter the same issues?
Just got some idea about what may happen to me.
Reports: iOS 4 upgrade kills old iPhones’ Wi-Fi (Yahoo News)
http://news.yahoo.com/s/ytechwguy/20100712/tc_ytech_wguy/ytech_wguytc3098

Same phone same os same problems. Over the past week my iPhone has been having trouble connecting to wifi. Have to join my home wi fi manually, everytime I want to go on Internet. Then it works for maybe a minute or two, then stops. Happening on other known networks too. Help

Not able to reconnect to wifi

Similar Messages

Maybe you are looking for