Not able to remove a attendee assigned on business event
Hi,
I am not able to remove a attendee assigned on business event
it shows in tcode psv2. but cant delete it.
points will be rewarded.
thanks
Hi Vinayak,
I have been tryng to cancel the attendee booking but it is not allowing me to cancel. When i press the cancel button it does not do anything. nor it show any error message. i am unable to understand the reason.
plz help
regards
TS
Similar Messages
-
Not able to remove items from initiative
Hello All,
We are on PPM 5.0 and I am trying to remove added items from the 'initiative' but I am not able to remove them.
Can someone kindly help, as to what might be preventing from removing items from initiatives.
Thanks,
SachinHi,
If you want to remove the Items from Intiative , you need remove the relationships object . Not possible to delete directly !
Steps :
Navigate to the Relationships tab , then go to the Sub tab Related Objects , select the Item and click Delete Assignment. You will remove the Item from Initiative dashboard !
Hope it works for you !
Regards,
Vincent
Edited by: ddd002 on Oct 4, 2011 6:53 AM -
Not able to remove 'emtpy home' directory entry
Hi
I'm trying to remove an Oracle 10.2.0.1.0 installation on a Linux system. My problem is, that I'm not able to remove an 'empty home' directory with the installer. The button 'Remove..' is grayed out.
The reason why I want to remove that directory is, that I want to do an installation into this directory again. But the requirements check of the installation fails because of this 'empty home' directory (which is actually deleted on the file system).
Does someone know where this information is stored on the filesystem or how I can force the installer to install in this directory anyway? BTW: I have also a 9.2 installation on the same system, but that's probably no problem.
Thanks!Has this database been upgraded via the patch process? If so, run the installer from the patch directory, you can often get to the uninstall from there. It all has to do with oracle inventory and what it sees as your most recent install. After you have done the uninstall/remove, you can just go delete the directory and remaining contents -- there will not be much left.
-
I am not able to remove an element of my side bar of the finder
I am not able to remove an element of my side bar of the finder
Try holding down the COMMAND key while dragging the element to the desktop.
-
Not able to remove the ABAP code from Transformation
Hello Experts,
We have transformation for DSO in that for one infoobject, field routine is written, Break Point is hard coded there and it's move to production. Now we are trying to remove that break point from development and then move it production.
we are doing following activity to remove the break point.
1. Open the transformation.
2. Open the field routine.
3. Going to ABAP code in field routine.
4. Remove the hard coded Break Point from ABAP code.
5. Saving the code.
6. It's taking to again filed routine window.
7. We close the window and activate the transformation.
8. When again check the ABAP code in field routine then it shows hard coded Break Point again.
9. Not able to remove the hard coded break point.
Can anyone know how to do this.
Help will be appreciated.
ThanksHi,
As pointed above, after point 6 don't simply close the window but click on Transfer Value and then activate your transformation. Refresh the system and check again.
Regards,
Arminder -
Not able to remove User from supervisor desktop
Im not able to remove an user that is not longer with the company from the queue, its on the agent queue and its shows at log out.
I already remove the user form CUCM, also deleted from the inactive user at the ccx admin, also Synchronize Directory Services and nothing..
the only thing I would like to do is
restart the Cisco Desktop Sync Service. but I dont know if I can do that during production without affecting other agents.
UCCX
Cisco Unified CCX Administration
System version: 8.5.1.11003-32
thanksHi Alberto,
Do you see this User ID in the Team which is managed by this supervisor, please de-associate it from the Team incase if it still appearing in the Team's associated list.
Hope this helps.
Anand
Please rate helpful posts !! -
I am not able to see the picture assigned on a contact when making a outgoing call in ios 7
I am not able to see the picture assigned on a contact when making a outgoing call in ios 7
Same issue
-
I have "@mail.ru" tool bar(i think) under the address bar. Its in a different language. I am not able to remove that. Please help me to remove that. Its not listed under 'Extensions', plug-ins,add-on too..
ThanksPlease look at another post I have just made relating to mail.ru, and post back with how you get on.
* [/questions/924267#answer-323108] <-- clickable link -- (blue) -- -
Training and event management: Book Attendee List for Business Event List
Dear all,
I know this:
PV07: book attendee list for business event
PV08: book attendee for business event list
Is there a tcode to book an attendee list for a business event list
Thanks a lot in advance!Hi Federico,
I think.., no. Below are the tcodes available to book attendee,
PV00 Book attendee for business event
PV01 Rebook attendee for business event
PV02 Prebook
PV03 Replace
PV04 Cancel
PV07 Book attendee for list for Business event
PV08 Book attendee for business event list.
Let me know if you found tcode for your requirement.
Thanks,
Karunakar -
Not able to remove the BizTalk Application from Admin Console
While removing the application I am getting the below error and after that not able to see any Resources also for the same application.
TITLE: BizTalk Server 2009 Administration Console
Delete of ApplicationNode failed.
ADDITIONAL INFORMATION:
Error while removing application XXXXXX". (mscorlib)
For help, click: http://go.microsoft.com/fwlink/?LinkId=47400&ProdName=Microsoft+BizTalk+Server+2009&ProdVer=3.8.368.0&EvtSrc=Microsoft.BizTalk.ApplicationDeployment&EvtID=RemoveApplicationFailure
Method not found: 'Microsoft.BizTalk.ExplorerOM.BtsCatalogExplorer Microsoft.BizTalk.ExplorerOM.BtsCatalogExplorer.GetBtsCatalogExplorerInstance()'. (mscorlib)Hi,
the problem here is that your installation is effectively corrupt, in other words the combination of assemblies on the system does not match one of the supported configurations. I hope this is not a production system?
Having said that I think you have taken some repair steps?
The specific error here is that the administration console is not getting matched with the correct version of the dependent assembly. So your first step is find a working BizTalk dev system and determine what the correct versions are. The best way to do
this is to take advantage of the tools associated with the .net Fusion system. See here for a good description:
http://blogs.msdn.com/b/suzcook/archive/2003/05/29/57120.aspx. Also that post is a little old, if you have a .net 4 based system the locations need to be tweaked (but you don't in BTS
2009).
What it will allow you to do is obtain a trace of where .net looked for assemblies and where it found the one it used.
It should be trying to find: microsoft.biztalk.explorerom.dll. However it takes a bit of time to understand the logs so just because you see a few failures don't worry, you are interested in the one it found.
mark -
Line item profitcenter not able to modifi in account assignment tab in ECC6
Hi ALL,
After upgardation to ECC6 in sales order va02 we are not able to change the profit center for line item in account assigement.
i have comapred my old system and new system the program FV45PF0C_COBL_SEND_PBO_VBAP proftcenter modifiction code is differs in old system and new system(ECC6).
The below code in ECC6
Profitcenter
int_coblf-fdnam = 'PRCTR'.
IF t180-trtyp NE chara AND
da_iaom NE 0.
if xvbup-lfsta NA 'BC' AND
*{ REPLACE SEPK900009 1
*\ xvbup-fksaa NA 'BC'.
xvbup-fksaa NA 'C'.
*} REPLACE
int_coblf-input = char1.
endif.
if int_coblf-input = char1.
loop at xvbfa where
posnv = vbap-posnr and
stufe = char00 and
( vbtyp_n = charl or "Lastschriftsanforderung
vbtyp_n = chark or "Gutschriftsanforderung
vbtyp_n = charo or "Gutschrift
vbtyp_n = charp ). "Lastschrift
if vbak-vbeln = xvbfa-vbelv.
clear int_coblf-input.
exit.
endif.
endloop.
endif.
if int_coblf-input = char1.
this below code is for old system which i can chage the profit center after creation of debit and credit memo and billing
I_KOKRS =
i_bukrs = t001k-bukrs
i_display_mode = da_mode
importing
e_screen_active = int_coblf-active
e_screen_input = int_coblf-input.
if int_coblf-active eq char1.
int_coblf-fdnam = 'FKBER'.
int_coblf-output = char1.
append int_coblf.
endif.
clear int_coblf.
endif.
Profitcenter
int_coblf-fdnam = 'PRCTR'.
if t180-trtyp ne chara and
da_iaom ne 0 and
xvbup-lfsta na 'BC' and
*{ REPLACE FEDK904445 1
*\ xvbup-fksaa NA 'BC'.
xvbup-fksaa na 'C'.
*} REPLACE
int_coblf-input = char1.
endif.
int_coblf-output = char1.
int_coblf-active = char1.
append int_coblf.
clear int_coblf.
Projekt
int_coblf-fdnam = 'PS_PSP_PNR'.
int_coblf-output = char1.
perform feldauswahl_status(sapmv45a) using 'VBAP-PS_PSP_PNR'
da_status.
i have chcked in SAP Note 1062986. and 893699.
Is there any alteranative solution to over come this problem.
thanks in advance
kumar.kHi,
In sales document profit center is come from material master, So when you creating sales document it will appear still you can change it.
But if you are creating sales document with any reference document then what ever profit centre in reference document that can not be changed.
Example - your quotation line item with profit centre XYZ, now you created sales order with reference to this quotation and you want to change profit centre is sales order as ABC instead of XYZ, then system will not allow you.
Even if you tried to change it will reset old one.
Even if you created sales order >> delivery >> invoice
And now you want to change it in sales order it will not allowed because subsequent documents already created.
Kapil -
I am not able to delete the expired certificate as no getting profiles which is available in earliar version under setting -> general -> profiles. Please help me here.
Thanks,
BhushanDear Jody..jone5
Good for you that can't update your iphone because I did it and my iphone dosen't work for example I can't download any app like Wecaht or Twitter..
Goodluck
Atousa -
Not able to update the attendance to employee for Event
Hi,
I have done the integration between Training & Business Event Management and Attendance.
While I am booking employee (who has a work schedule from 9.00 u2013 5.30 p.m.) to Event Type with a schedule time 8.00 hrs to 18:00 hrs. It is not allowing me to book that employee to this event as his workschedule is not falling in schedule time.
It is booking events to the employee who are falling under their work schedule and updating attendance.
Requirement is Administrator should be able to book employee from different work schedule to the event timing.
Is there any standard solution available that it will check for the employees work schedule & book for him attendance for that day if event as per his work schedule timings.
Thanks & Regards
SanjayHi Sanjay,
Please goto Maintain Business event type t-code (you can use PP01 by selecting D - Bus event type object type too) - select your bus event type. Then select Business Event Type Info infotype and select change.
There, you can select "Allowed in instructors time off" and "Allowed in attendees time off" checkboxes.
Regards,
Dilek -
Crystal report not able to see a SQL view in Business One
Hi all
I am trying to create a report using views I have created in the Business One database.
I can run the report fine when using the Crystal Designer, but when I try to Preview the external Crystal report file from within Business One, it comes up with an error 'The table 'xxxx' can not be found'.
I have tried to make the connect an SAP Business One connection, and also tried it with the OLEDB connection. Neither worked.
(I can however preview other 'table' reports fine)
I am running SAP B1 8.8 SP 0 pl 15 and SQL2005.
As views are allowable in B1 databases I would hope that we can use them in our Crystal reports. Can we use views?
Or is it my setup/Crystal setup that is causing me issues.
Any help much appreciated.
Thanks
DeniseHi Gordon and Kevin
Thank you both for your replies.
Gordon - great idea to use the Command mechanism. I had not thought of that but will give that a try.
Kevin - pleased to hear views are allowed as I often use them in my reports.
I think I have a more basic issue with my setup of Crystal & B1 on the system - and perhaps this is causing my inability to use views.
My current approach is to install Crystal Designer on the server. I know that it is preferable to put the designer elsewhere but I am not able to connect using SAP Business One connection at all from the client machines. Frustration! (Keeps saying Logon failed and I KNOW I have the correct logon details)
Will update this thread once I have set up the designer on the server and hopefully succeeded in including a view (or command) in a report.
Thanks for your help
Denise -
Not able to get changed values in the SAVE EVENT in ServHPartnerDet view
Hi Experts,
I am new CRM WEB IC, i have requirement like need to access four IBASE fields from BupaIbaseDetail and need to display those fiedls in ServHPartnerDet view. I am able display the fields and its values in the target view. But when user press change button and changes those four fields and press save button not able get the changed values in to the SAVE EVENT.Anyone please help me in this.
IBHEADER , IBASEADDRESS are the CONTEXT NODE CREATED in target view. I have binded IBHEADER to CuCoIbase custom controller and getting four fields data from IBASEADDRESS. below is the code for CREATE_CONTEXT_NODES.
METHOD create_ibaseaddress.
DATA:
model TYPE REF TO if_bsp_model,
coll_wrapper TYPE REF TO cl_bsp_wd_collection_wrapper,
entity TYPE REF TO cl_crm_bol_entity, "#EC *
entity_col TYPE REF TO if_bol_entity_col. "#EC *
model = owner->create_model(
class_name = 'ZL_CRM_IC_SERVHPDET_CN00'
model_id = 'IBaseAddress' ). "#EC NOTEXT
ibaseaddress ?= model.
CLEAR model.
coll_wrapper =
ibheader->get_collection_wrapper( ).
TRY.
entity ?= coll_wrapper->get_current( ).
CATCH cx_sy_move_cast_error.
ENDTRY.
IF entity IS BOUND.
TRY.
entity_col = entity->get_related_entities(
iv_relation_name = 'FirstLevelComponent' ).
CATCH cx_crm_genil_model_error.
ENDTRY.
TRY.
entity ?= entity_col->get_current( ).
CATCH cx_sy_move_cast_error.
ENDTRY.
CLEAR entity_col.
IF entity IS BOUND.
TRY.
entity_col = entity->get_related_entities(
iv_relation_name = 'ComponentAddress' ).
ibaseaddress->set_collection( entity_col ).
CATCH cx_crm_genil_model_error.
ENDTRY.
ENDIF.
ENDIF.
ENDMETHOD.Code i have written in the CREATE_CONTEXT_NODE method for my custom context nodes( IBHEADER,IBASEADDRESS).
this CREATE_IBHEADER some data related to IBASE header then from this reading the IBASEADDRESS contextnode fields for displaying in the ServHPartnerDet. It is working fine but After changing the four fields values in the ServHPartnerDet view and trying to save, then context is not reading the new values it gives the old values only.
TRY.
lr_coll_wr = ztyped_context->ibaseaddress->get_collection_wrapper( ).
IF lr_coll_wr IS BOUND.
lr_entity ?= lr_coll_wr->get_current( ).
ENDIF.
CATCH cx_crm_genil_model_error.
ENDTRY.
CALL METHOD lr_entity->if_bol_bo_property_access~get_property_as_value
EXPORTING
iv_attr_name = 'BUILDING'
IMPORTING
ev_result = lw_building.
the building has got result of old value no the new value.
method CREATE_IBHEADER.
DATA:
model TYPE REF TO if_bsp_model,
coll_wrapper TYPE REF TO cl_bsp_wd_collection_wrapper,
entity TYPE REF TO cl_crm_bol_entity, "#EC *
entity_col TYPE REF TO if_bol_entity_col. "#EC *
model = owner->create_model(
class_name = 'ZL_CRM_IC_SERVHPDET_CN01'
model_id = 'IBHEADER' ). "#EC NOTEXT
IBHEADER ?= model.
CLEAR model.
bind to custom controller
DATA:
cuco TYPE REF TO cl_crm_ic_cucoibase_impl,
cnode TYPE REF TO cl_bsp_wd_context_node.
cuco ?= owner->get_custom_controller(
'CuCoIbase' ). "#EC NOTEXT
cnode ?=
cuco->typed_context->ibaseheader.
coll_wrapper = cnode->get_collection_wrapper( ).
ibheader->set_collection_wrapper( coll_wrapper ).
endmethod.
Maybe you are looking for
-
Novo fórum de desenvolvimento e plataformas tecnológicas em Português
Caros, na tentativa de adequar mais os fórums em Português à demanda real do mercado, vamos executar algumas mudanças nos próximos meses. Como primeira delas, fizemos uma reformulação do fórum de Netweaver para refletir as mais recentes aquisições da
-
Some sites needs Internet Explorer and doesnt open in Safari!!!
Hello, There are couple of sites that doesnt open in Safari and the messege I get is : The TIBCO General Interface product requires Microsoft Internet Explorer v. 6.0 or greater. The website is http://www.dsm.com.qa/dsmsite/ And then click on Love Qu
-
Elements 11 won't support RAW for Nikon D3300, no plug-in updates
Got a new Nikon D3300 and Elements 11 doesn't seem to support the file format. I keep getting an error. Tried to find a plug-in update but there is nothing for 11. I need this fixed ASAP - what can I do!!??
-
I go into the disk utlitity and all that is in there is the cd rom & the disc itself that shows up on the left side.. i try to create a new image and it defaults the size to 17 and whenever i try and create it i get cant create disk error -61.. how c
-
Bios update? overclock help?
hey guys! i need some help with and if its posible to overclock my intel CPU and card.First some system info: Windows 8.1 64Bitsintel Core i7- 3632QM 2,2 Ghz(gets to 3,2Ghz in turbo boost)8GB DDR3 memory 789Ghz3GB SDHC Readyboost CardHP 1842 U3E1 Mot