Not able to remove a mail from inbox

Hi everybody, need help please
Few days back I received an official mail. I deleted this mail several times, however it is only a moment before it appears again in my inbox. I am using OS X 10.10, Google Chrome, Mail, and Cyber Security Pro. What seems a problem?

Hi ..
Disable the Cyber Security Pro software then delete the email.

Similar Messages

User not able to save e-mails from public folder

Hi,
I have a email user with a complain that she is not able to save some e-mails from public folder, nor their attachments, nor to forward them to her own inbox. This happen not for all emails but randomly for some emails in her public folder.
She can open and read but got following error message , while trying to save the attachment of the email
"Cannot save the attachment. You do not have sufficient permission to perform this operation on this object. See the folder contact or your system administrator"
The following error occurred when she trying to forward the email.
"Cannot open this item. You do not have sufficient permission to perform this operation on the object. See the folder contact or your system administrator"
I have tried to grant "Edit All" in the write permission area, later tried with "owner permission" too but still having the same errors.
I found out in some occasion when the email is read only then it cannot be forwarded, copy or print the contents.
I see emails in the public folder appeared with "Read only" but most of them can be saved and forward, only few appear with errors for the user. I did checked the emails "Restrict permission" setting and that display
with "No restriction".
How can I get rid of the errors and allow the user to save the attachment and also save the email in different location of the public folder.
Thanks
Selvem

Hi,
Please check if you can move these affected messages to Inbox folder.
And please check if the issue persists in OWA.
Does this issue affect only one user?
If this issue only affects one user, you can recreate Outlook profile to check result.
Best regards,
Belinda Ma
TechNet Community Support

Not able to send e-mails from iCloud

Anyone have solutions to not being able to send e-mails on icloud on Mac Book Pro. This just started in the past week. Not sure what happened.

I am having the same or a similar problem. When I open iCloud in system preferences and tick on Mail I get the message 'mail can't enabled at this time - Wait a moment and then try turning on Mail again'. I did this several times and it didn't work. I then completely turned off iCloud completely and restarted it, but I was still unable to access mail using iCloud (I was, however, able to access all of the other iCloud services). I then waited three days, to see if the issue would resolve its self, but it hasn't. Any suggestions as to how I can resolve this would be appreciated.

User not able to send the mail from other mail box on outlook 2007

In my outlook(2007), i am using my mail box to send the mail and receiving the mail every thing working fine, now what happened , i am adding one of my users mail box to my outlook profile,and trying to send the mail from that mail box,when ever
i am trying to send its give me the message called message undelivered and permission error. as i am full permission on that users mail box. but still getting that issue.
My lab info
Exchange server 2010 sp3
outlook 2007

HI Paul,
In exchange, you have something called Send as permission as well. Try to give send as permission to your self from the user's mailbox.
In exchange> Reciepient config> Mailboxes> user mailbox> right click> Full Send as permssion
or,
Add-ADPermission -Identity "user1" -User "[email protected]" -ExtendedRights Send-As
After you add your self in send as permission you need to wait for some time to propagate the settings or you can forcefully reset the information store services
That should solve your issue.
UMESH DEUJA MCP,MCTS,MCSA,CCNA

Not able to send e-mails from Pre

I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Hello!
For your charter email account you could be using smtp.charter.net BUT charter, like virtually all other ISPs providing email service, blocks access to their outgoing server if your trying to connect to it outside their own network. If you connect via WiFi throught your home internet it will work fine. Their are only 2 options to combat this limitation:
1. Use authenticated SMTP (ESMTP)
2. Use a different SMTP server.
For your outgoing mail settings for the charter account, use the smtp.charter.net with no SSL and yes for Use Authentication option. Use the SAME user/password you do for the incomming. If this doesn't work then either you subscribe to charter business class or skip to option 2.
Option 2 is using a different server. Typically you would just use the SMTP server if you device's ISP (Sprint) but Sprint is discontinuing their SMTP service and is only avail for long time legacy customers. Google may not smile on this but for the outgoing mail server settings for the charter acct you can use the same settings from your gmail acct:
smtp.gmail.com (use authentication)
Use Authentication: Yes (use the user and password FOR YOUR GMAIL ACCT, not charter email here)
Use SSL
Port: 465 or 587
This option is giving mixed results but these are the options when working with an email provider that blocks access of their smtp server from other ISPs.

I am not able to email a file from Adobe Reader. When I click to share the file, the option does not pop up to share (via Mail, Message, Air Drop, etc.).

I am not able to email a file from Adobe Reader. When I click the button to share a file, there is no option for route from which to share (Message, Mail, Air Drop, etc. does not pop up).

What version of Reader and OS X?

Not able to remove the ABAP code from Transformation

Hello Experts,
We have transformation for DSO in that for one infoobject, field routine is written, Break Point is hard coded there and it's move to production. Now we are trying to remove that break point from development and then move it production.
we are doing following activity to remove the break point.
1. Open the transformation.
2. Open the field routine.
3. Going to ABAP code in field routine.
4. Remove the hard coded Break Point from ABAP code.
5. Saving the code.
6. It's taking to again filed routine window.
7. We close the window and activate the transformation.
8. When again check the ABAP code in field routine then it shows hard coded Break Point again.
9. Not able to remove the hard coded break point.
Can anyone know how to do this.
Help will be appreciated.
Thanks

Hi,
As pointed above, after point 6 don't simply close the window but click on Transfer Value and then activate your transformation. Refresh the system and check again.
Regards,
Arminder

Not able to remove items from initiative

Hello All,
We are on PPM 5.0 and I am trying to remove added items from the 'initiative' but I am not able to remove them.
Can someone kindly help, as to what might be preventing from removing items from initiatives.
Thanks,
Sachin

Hi,
If you want to remove the Items from Intiative , you need remove the relationships object . Not possible to delete directly !
Steps :
Navigate to the Relationships tab , then go to the Sub tab Related Objects , select the Item and click Delete Assignment. You will remove the Item from Initiative dashboard !
Hope it works for you !
Regards,
Vincent
Edited by: ddd002 on Oct 4, 2011 6:53 AM

Not able to remove User from supervisor desktop

Im not able to remove an user that is not longer with the company from the queue, its on the agent queue and its shows at log out.
I already remove the user form CUCM, also deleted from the inactive user at the ccx admin, also Synchronize Directory Services and nothing..
the only thing I would like to do is
restart the Cisco Desktop Sync Service. but I dont know if I can do that during production without affecting other agents.
UCCX
Cisco Unified CCX Administration
System version: 8.5.1.11003-32
thanks

Hi Alberto,
Do you see this User ID in the Team which is managed by this supervisor, please de-associate it from the Team incase if it still appearing in the Team's associated list.
Hope this helps.
Anand
Please rate helpful posts !!

I have "@mail.ru" tool bar(i think) under the address bar. Its in a different language. I am not able to remove that. Please help me to remove that

I have "@mail.ru" tool bar(i think) under the address bar. Its in a different language. I am not able to remove that. Please help me to remove that. Its not listed under 'Extensions', plug-ins,add-on too..
Thanks

Please look at another post I have just made relating to mail.ru, and post back with how you get on.
* [/questions/924267#answer-323108] <-- clickable link -- (blue) --

I am not able to open my mail appicaton?

i am not able to open my mail application. i am getting an error if i open my mail.....

Mail won't run in Classic operating systems from 2001 and earlier, also available as boot operating systems on Macs from 2003 and earlier.
Are you trying to load it in Classic, or some version of Mac OS X? Go to Apple menu -> About This Mac to find out your operating system version.
Are using any system cache cleaning software? That may be the culprit. The worst of them is MacKeeper, documented here as to how to remove:
https://discussions.apple.com/docs/DOC-3036

Problem Removing Junk Mail from POP Server

Is there a way to automatically remove junk mail from the POP server when I delete the Junk within the Apple Mail application?
The Mail application Junk filter is working pretty well for me on my primary MacBook Pro system. My inbox is mostly junk free and I like that I can check the Junk folder to see if any "good" e-mail got snared before deleting the junk from the junk folder.
However, "Erasing Junk Mail" from the junk mail folder does NOT erase the junk from my POP server. So if I check the same e-mail account on another computer or my Treo, I have endure the same junk messages again which can quickly mount up to 100+ messages over the course of a day.
I can manually delete messages from the POP server by using the Get Info window in the Shortcuts/Actions Menu at the bottom left of the Mail browser.
However, I have to manually identify and select the junk messages from all the mail on the POP server to delete it which is both tedious and time consuming.
Isn't there some way instruct the program to automatically delete Junk from the server when it's deleted from the browser?
It seems like it would be an obvious feature.
I've looked for some way to do this including apple scripts but I can't find a way to do it.
Thanks in advance for any help or suggestions.

michellzappa,
All of my e-mail providers have some sort of web based access for my accounts. They identify, segregate and prevent any message marked as bounce from being downloaded to my inbox. Is this what you are describing as redundant?
Mail Scripts 2.7.10 by Andreas Amann, provides an excellent compilation of mail scripts.
I would advise that you create a new post with the title. "Can I write an applescript to automatically clean out messages on server every hour?" in the AppleScript Forum.
;~)

User not able to receive an emaik from SAP to Outlook.

User is not able to receive an email from SAP to Outlook.In SCOT the configuration to receive email has been set up and all other users are able to receive the emails except one user. Even the email address of the user is correctly entered in the user master record. What is the authorization required to be setup for this user from security perspective ?
Thanks.

Hi,
We have configured the SMTP server in our system to send out mails, but we donot know the configurations for receiving mails. [ We are not using SAP exchange connector (is it needed?) ]
I have read the note 455140 and 54617.
But i am stuck on , What are the configurations to be done on the MS Exchange Server 2003 for redirecting the mails received in the inbox of a particular user to the SAP system.
The note says it has to be configured to redirect mail to <hostname>: <port> But where exactly do we define the routing rules.
If anyone has a detailed document on what are the configurations involed in receiving mails, Please send it.

The problem here is i am not able to get the data from the list

hi all,
i have the following code
EnrichedProductCatalogue enrichedProductCatalogue1 = new EnrichedProductCatalogue();
enrichedProductCatalogue1.setAssetCount(2);
enrichedProductCatalogue1.setBlockingProduct("Weekend Freebee");
enrichedProductCatalogue1.setBlockingReason("Compatability");
ArrayList<String> availableActionsList = new ArrayList<String>();
availableActionsList.add(EnrichedProductConstants.ADD.toString());
availableActionsList.add(EnrichedProductConstants.REMOVE.toString());
enrichedProductCatalogue1.setAvailaibleActions((ArrayList<String>)availableActionsList);
BundleProduct bundleProduct = null;
Product product = new Product();
product = new Product();
product.setProductName("International");
product.setProductClassName("International");
ArrayList<UiCategory> uiCategory = new ArrayList<UiCategory>();
UiCategory uiCategory1 = new UiCategory();
uiCategory1.setCategoryName("Simply");
UiCategory uiCategory2 = new UiCategory();
uiCategory2.setCategoryName("Freebees");
uiCategory.add(uiCategory1);
uiCategory.add(uiCategory2);
product.setUiCategory(uiCategory);
bundleProduct = new BundleProduct();
bundleProduct.setCommercialProduct(product);
enrichedProductCatalogue1.setBundleProduct(bundleProduct);
listOfEnrichProducts.add(enrichedProductCatalogue1);
listOfEnrichProducts.add(enrichedProductCatalogue1);
here i have an list called listOfEnrichProducts.
here i am adding two objects of enrichedProductCatalogue.
which contains a object called BundleProduct.
which has a reference for Product class.
here this product class has a list which contains objects of another class called UiCategory.
the problem here is i am not able to get the data from the list which contains UiCategory objects .
the following is the UI
<af:table var="row" rowBandingInterval="0" id="t1"
value="#{pageFlowScope.sample1}"
binding="#{pageFlowScope.sampleManagedBean.dataTable}"
partialTriggers="apimethods ::apimethods">
<af:column sortable="false" headerText="ProductName" id="c2">
<af:outputText value="#{row.bundleProduct.commercialProduct.productName}" id="ot15"/>
</af:column>
<af:column sortable="false" headerText="ProductClass" id="c12">
<af:outputText value="#{row.bundleProduct.commercialProduct.productClassName}" id="ot19"/>
</af:column>

<af:column sortable="false" headerText="AssetCount" id="c22">
<af:outputText value="#{row.assetCount}" id="ot1"/>
</af:column>
<af:column sortable="false" headerText="blockingReason" id="c3">
<af:outputText value="#{row.blockingReason}" id="ot2"/>
</af:column>
<af:column sortable="false" headerText="blockingProduct" id="c4">
<af:outputText value="#{row.blockingProduct}" id="ot3"/>
</af:column>

</af:table>
Can anyone pls give some solution ...

Hi Frank,
value="#{pageFlowScope.sample1}"
here sample is
Map<String, Object> flowScope1 =
ADFContext.getCurrent().getPageFlowScope();
flowScope.put("sample1", listOfEnrichProducts);
this is not the problem . i am able to get all the values except the following .
ArrayList<UiCategory> uiCategory = new ArrayList<UiCategory>();
UiCategory uiCategory1 = new UiCategory();
uiCategory1.setCategoryName("Simply");
UiCategory uiCategory2 = new UiCategory();
uiCategory2.setCategoryName("Freebees");
uiCategory.add(uiCategory1);
uiCategory.add(uiCategory2);
product.setUiCategory(uiCategory);

Not able to edit the report from BO 5.1

Hi,
User has Business Objects 5.1 version on his machine and he is able to login to Business Objects 5.1.2 and can also open the BO reports from the required path
When he edit the report, the BO is gettng hung and following errors occured one by one when he clicks ok button
error1: "you must close this universe(name of universe) before importing it"
when he clicks OK button on this error, second error is received
error2: "Some obsolete objects have been removed from the query. (QP0027)"
When he clicks OK button on this error, third error is received
error3:"A connection required to refresh this document is unavailable(DA0004)"
I am not understanding why these three errors are receiving one by one.Please tell me how to resolve above errors and edit the report
kind Regards,
Srinivas

Hi Denis,
Normally,what we do is once we provide access to webi users group for each user from BO supervisor module, user(s) will able to refresh/edit the existing report from Full client BO.His colleagues have had no problem editing all his reports from their machines but he is not able to edit any report from his machine and BO is getting freeze.
He also reinstalled BO and cleaned out everything on his Computer and re-built it but the issue is not yet resolved
Can you please tell me how to resolve this issue
Kind Regards,
Srinivas

Not able to remove a mail from inbox

Similar Messages

Maybe you are looking for