Not able to remove the ABAP code from Transformation

Hello Experts,
We have transformation for DSO in that for one infoobject, field routine is written, Break Point is hard coded there and it's move to production. Now we are trying to remove that break point from development and then move it production.
we are doing following activity to remove the break point.
1. Open the transformation.
2. Open the field routine.
3. Going to ABAP code in field routine.
4. Remove the hard coded Break Point from ABAP code.
5. Saving the code.
6. It's taking to again filed routine window.
7. We close the window and activate the transformation.
8. When again check the ABAP code in field routine then it shows hard coded Break Point again.
9. Not able to remove the hard coded break point.
Can anyone know how to do this.
Help will be appreciated.
Thanks

Hi,
As pointed above, after point 6 don't simply close the window but click on Transfer Value and then activate your transformation. Refresh the system and check again.
Regards,
Arminder

Similar Messages

Not able to remove the BizTalk Application from Admin Console

While removing the application I am getting the below error and after that not able to see any Resources also for the same application.
TITLE: BizTalk Server 2009 Administration Console
Delete of ApplicationNode failed.
ADDITIONAL INFORMATION:
Error while removing application XXXXXX". (mscorlib)
For help, click: http://go.microsoft.com/fwlink/?LinkId=47400&ProdName=Microsoft+BizTalk+Server+2009&ProdVer=3.8.368.0&EvtSrc=Microsoft.BizTalk.ApplicationDeployment&EvtID=RemoveApplicationFailure
Method not found: 'Microsoft.BizTalk.ExplorerOM.BtsCatalogExplorer Microsoft.BizTalk.ExplorerOM.BtsCatalogExplorer.GetBtsCatalogExplorerInstance()'. (mscorlib)

Hi,
the problem here is that your installation is effectively corrupt, in other words the combination of assemblies on the system does not match one of the supported configurations. I hope this is not a production system?
Having said that I think you have taken some repair steps?
The specific error here is that the administration console is not getting matched with the correct version of the dependent assembly. So your first step is find a working BizTalk dev system and determine what the correct versions are. The best way to do
this is to take advantage of the tools associated with the .net Fusion system. See here for a good description:
http://blogs.msdn.com/b/suzcook/archive/2003/05/29/57120.aspx. Also that post is a little old, if you have a .net 4 based system the locations need to be tweaked (but you don't in BTS
2009).
What it will allow you to do is obtain a trace of where .net looked for assemblies and where it found the one it used.
It should be trying to find: microsoft.biztalk.explorerom.dll. However it takes a bit of time to understand the logs so just because you see a few failures don't worry, you are interested in the one it found.
mark

Not able to read the wsdl file from server Premature EOF encounter

Hi All,
I am facing issue while accessing a web Service from server. Here is the clear view about it.
I created a simple SyncBpel process in a composite and deployed in to the server and it is working fine. Later i created a new Asyn bpel process in a composite and in the external reference i dragged a web Service and imported the wsdl url from server of the SyncBpel and wired the Asynbpel process to webserive .
Now here i am facing peculiar behavior which i am not able to trace it out.
1) For the first time when i import the url of syncBpel from the server i am not facing any error and it is working fine as expected but when i close the Jdeveloper and open it i am not able to user the web Service and it is saying as "Not able to read the wsdl file from server Premature EOF encounter"
2)When i close and open the Jdeveloper i can see the url of the wsdl which imported in webserver is changing from http://stcfmw03.satyam.com:8021/soa-infra/services/Tarak/synchronousBpel/bpelsync_client_ep?WSDL to http://stcfmw03.satyam.com:8021/soa-infra/services/Tarak/synchronousBpel/BPELsync.wsdl
3)when I open and see the url http://stcfmw03.satyam.com:8021/soa-infra/services/Tarak/synchronousBpel/bpelsync_client_ep?WSDL I can see the soap address as *<soap:address location="http://stcfmw03.satyam.com:8021/soa-infra/services/Tarak/synchronousBpel!1.0*soa_5cfb8416-c106-40a2-a53b-9054bbe04b9c/bpelsync_client_ep"/>*
I don’t understand why the soap end contains “*soa_5cfb8416-c106-40a2-a53b-9054bbe04b9c” and this kind of url for soap address is coming to all the bpel process which I am deploying in the server.
I checked the in Jdeveloper where webproxy is uncheck and the server is also up but still I am facing issue of reading the error.
Can someone please help in resolving the issue.
I am using SOA 11g 11.1.1.5 and Jdeveloper 11.1.1.5
Many thanks.
Tarak
Edited by: user11896572 on Jan 17, 2012 5:22 PM

Hi,
Setting default from the jdeveloper -
During composite deployment from Jdeveloper (wizard driven), you will be given an option to choose the version of the composite and there will also be an option for you to choose if the composite needs to be deployed as default.
Setting default from the em console -
After deploying a composite, login to the em console and click on the composite that you want to set as default, and you will find a tab - "Set as Default". please note that this tab will not be seen, if the composite is already set as default.
Refer -
http://docs.oracle.com/cd/E12839_01/integration.1111/e10226/soacompapp_mang.htm
8.2 Managing the State of Deployed SOA Composite Applications
Thanks

TS3988 I am not able to open the settings icon from my old iPAD. When I try to select the settings icon it looks like it's about to launch and open however; it will not stay open. I am trying to transfer all my data from my old iPAD to my new 4th gen iPAD

I am not able to open the settings icon from my old iPAD. When I try to select the settings icon it looks like it's about to launch and open however; it will not stay open. I am trying to transfer all my data from my old iPAD to my new 4th gen iPAD.

Try a soft reset - press the home and power bottons and keep them pressed until the Apple logo comes on. Then see if you can access Settings.

Photos app in my mac is not able to open the iPhoto library from my external hard disk.

I am using iMac (21.5-inch, Late 2013) OS 10.10.3. i have 2 iPhoto library one on my Mac HD and the other on my External HD which i primarily use and which has all the latest photos in it. Now with the new update to photos app in Mac i am not able to open the iPhoto library from my external HD. I get the following error message please help.

i am not able to open the iPhoto library from my external HD
How is the external HD formatted? Is the filesystem MAcOS Extended (Journaled) as necessary?
Is theHD directly connected or by a networked connection?
Have you tried to set the "Ignore Ownership on this volume" flag?
See how to prepare the drive for storing an iPhoto Library on it in this document: iPhoto: Sharing libraries among multiple users
Which version of iPhoto created the library? If it was iPhoto 7.1.2 or earlier, download and run the iPhoto Library upgrader.
iPhoto '11 or later: About the Library Upgrader - Apple Support

Hi, i'am not able to find the redemption code that is required to renew subscription for my creative cloud account. Please advice.

Hi, i'am not able to find the redemption code that is required to renew subscription for my creative cloud account. Please advice.

Redemption Code Help
Mylenium

HT4528 On connecting my iphone5 to my windows7 pc I am not able to open the iphone folder from my computers. It says "you dont have permission to access this phone"

On connecting my iphone5 to my windows7 pc I am not able to open the iphone folder from my computers. It says "you dont have permission to access this phone"

I'm not sure what you're asking. Are you writing a program that results in the error when you test it? (This is the developer forum).

How do i remove the restriction code from my iphone 4s? i forgot it

How do i remove the restriction code from my IPHONE 4S? I have forgotten what it is. PLEASE HELP!!!

If you lose or forget a restriction passcode, you will need to perform a factory restore to remove it.
That is what it says here http://support.apple.com/kb/ht4213
Message was edited by: Ocean20

I would like to remove the pass code from my iphone icloud account. I hate having to log in every time ti goes to sleep.

How do I remove the pass code from my iphone icloud account? I hate having to log in every time my phone goes to sleep.

Welcome to the Apple community.
settings > general > passcode lock > off.

Remote Object - not able to get the returned value from java method

     Hi ,
I am developing one sample flex aplication that connects to the java code and displays the returned value from the
java method in flex client. Here I am able to invoke the java method but not able to collect the returned value.
lastResult is giving null . I am able to see the sysout messages in server console.
I am using flex 3.2 and blazeds server and java 1.5
Here is the code what I have written.
<?xml version="1.0" encoding="utf-8"?><mx:WindowedApplication xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute" backgroundColor="#FFFFFF" initialize="initApp()">
<mx:Script><![CDATA[
import mx.controls.Alert;
import mx.binding.utils.ChangeWatcher;
import mx.rpc.events.ResultEvent;
import mx.messaging.*;
import mx.messaging.channels.*
public function initApp():void {
     var cs:ChannelSet = new ChannelSet();
     var customChannel:Channel = new AMFChannel("my-amf", "http://localhost:8400/blazeds/messagebroker/amf");     cs.addChannel(customChannel);
     remoteObj.channelSet = cs;
public function writeToConsole():void {      remoteObj.writeToConsole(
"hello from Flash client");
      var returnedVal:String = remoteObj.setName().lastResult;     Alert.show(returnedVal);
//[Bindable]
// private var returnedVal:String;
]]>
</mx:Script>
<mx:RemoteObject id="remoteObj" destination="sro" />
<mx:Form width="437" height="281">
<mx:FormItem>
</mx:FormItem>
<mx:Button label="Write To Server Console" click="writeToConsole()"/>
</mx:Form>
</mx:WindowedApplication>
Java code
public
     public SimpleRemoteObject(){
          super();     }
class SimpleRemoteObject {
     public void writeToConsole(String msg) {          System.out.println("SimpleRemoteObject.write: " + msg);     }
     public String setName(){          System.
out.println("Name changed in Java");
          return "Name changed in Java";
And I have configured destination in remote-config.xml
<destination id="sro">
   <properties>
    <source>SimpleRemoteObject</source>
    <scope>application</scope>
   </properties>
</destination>
Please help me .

You are not able to get the returned value because if you see the Remote object help you will realise you have to use result="resultfn()" and fault = "faultfn()"
In this you define what you wish to do.
More importantly in the remote object you need to define which method you wish to call using the method class like this
<mx:RemoteObject id="remoteObj" destination="sro" result="r1" fault="f1" >
     <Method name="javaMethodName" result="r2" fault="f2"/>
<mx:RemoteObject>
r2 is the function where you get the result back from java and can use it to send the alert.

My little cousin scratched my i tunes gift card with a key and now I am not able to decipher the entire code. Is there any way of still being able to redeem my i tunes gift card?

My little cousin scratched my i tunes gift card with a key and now I am not able to decipher the code on the back. Is there any way of still being able to redeem the gift card?

This forum is for questions from those managing sites on iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes forums.
Answering quickly, though, see:
http://support.apple.com/kb/TS1292
Regards.

Not able to access the Database & Clusterware from OEM Console.

hi,
I had installed Oracle RAC 11g R2 in RHEL 5.3 Operating environment. I had installed my Oracle RAC with Enterprise Manager Console.
Its with the defailt port 1158. After the installation when i try to access my EM Console, i was not able to access the Database and Clusterware from EM Console.
When i access the EM console with url, I found with Startup and Perform Recovery option. But whereas my database is already startup and running.
So when i click startup its saying database is already started. Since it is a prodution environment i dont want to go with Perform recovery option.
Please tell me hw to attach files in this thread so that i can send the snap shot of the console for your reference.
with regards
A.Aravind
Edited by: 795847 on Sep 21, 2010 10:40 PM

hi,
As mentioned due to not having the default listener port 1521, we are facing this problem.
As meniotned i had changed the emoms.properties file and changed the port and my emctl page is opening.
But am not able to access the other parameters like ASM, Servers, Clusters etc bcoz since in some file it is looking for 1521 default port.
So is it better to go for emctl deconfig and config again or to change the port the files which required.
If i do in what are the file the default port will be located related to emctl.
with regards
A.Aravind

I would like to be able to remove the 'bookmarks toolbar' from the bookmarks menu.

Recently Firefox had a .. problem. I'm not sure what it was, or why. I just opened it one day and it had to 'reset'. So, it did, and i lost a bunch of things like addons and themes and stuff like that. Its not a big deal, because all the data was still there. Still, i have to fix some things again.
I'm still using Firefox 15 - mostly because of some addons that aren't available in later ones, namely an addon that lets me make the window title Aero themed, i like that much more than the solid colours and i can't find one that works with later versions (anyone know of a way around that i would love to hear that too.
Anyway, my question is simple I used to have the ability (i guess, an addon i've since forgotten about) to go to remove the 'bookmarks toolbar' from the Bookmarks menu. Also, i had a 'save all tabs' or something similar to that. Does anyone know an addon, or tweak, or anything that could get me that again?

Sounds that you had a chrome folder with a userChrome.css file in it to do such a customization.
*http://kb.mozillazine.org/userChrome.css
*http://kb.mozillazine.org/Editing_configuration
If you have the Old Firefox Data folder on the desktop then check that folder for the chrome folder and copy that folder to the current Firefox Profile Folder.
You can use this button to go to the Firefox profile folder:
*Help > Troubleshooting Information > Profile Directory: Show Folder
See also:
*[[/questions/877124]]

Not able to activate the Function Code in screen layout.

Hi Experts,
I was not able to activate the screen function code in se51.
It is in the transaction code - J1IEX.
What can the possible reasons?..
Please suggest.
Regards,
Neslin.

Hi Jorge ,
No , i didnt find the custom fields in IS_ITEM which i have added in the PO item level .
i have added the custom field in this include INCL_EEW_PD_ITEM_CSF_PO .
More over this include wont included in the IS_ITEM structure .
Thank you,

Not able to view the excel output from eBS

Hi All,
I am not able to open the reports for the first time and this error is keep on coming everyday whenever i try to open any report for the first time.
     Microsoft office Excel cannot access the file 'http:// '. There are several possible reasons:
     The file name or path does not exist.
     The file is being used by another program.
     The workbook you are trying to save has the same name as a currently open workbook
But in the second time o/p opens without any issues.
Can you please let me know what will be the cause of the issue.
Thanks
Rajesh

What browser are you using?
If Chrome, try something else. Chrome works fine with help on the server but not locally. There is more in Snippets on my site about the Chrome issue.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Not able to remove the ABAP code from Transformation

Similar Messages

Maybe you are looking for