Not able to render After Effects comp in Premiere CC Pro using Dynamic Link

I've noticed that I'm not able to completely render a After Effects comp inside a Premiere CC sequence. The render bar goes about half way and stays there. I found I have to quit After Effects for the render in Premiere to complete. Is this normal?
I'm running Mavricks on the new Mac Pro.

It's not normal on Windows.

Similar Messages

Can't apply transitions to After Effects comps in Premiere Pro

Hi people, newbie Premiere user here (my boss is trying to convert me from FCS) :-) I downloaded the trial version of CS5 and want to learn as much as I can before my initial 30 days is up. My initial experience has been pleasant, but I've come up against an obsticle I could sure use some help with.
1)     Creating my timeline with serveral clips
2)     Exporting certain clips to After Effects; 'Replace with After Effects composition'
3)     Adding my effects
4)     Back in Premiere Pro my clip is replaced by the comp.
5)     Try to apply a simple cross-dissolve across 'Comp 01/Comp 02'
PROBLEM!
Seems the transition will only snap to the start of the second comp. With clips I can drag & drop the effect to span the clips and get perfect results, but not on an After Effects comp.
6)     In Premiere Pro 'Effect controls' change parameter so that the transition centre is at 'cut'
The result indeed spans the clips, but the effect quality is terrible - decent fade from comp 01 to a sudden dip to black before fade-up on comp 02.
Yes, I understand the 'Layers' concept, but I'm not asking the software to do anything nonsensical, just a simple cross-fade across 2 comps.
I really would appreciate any advice anyone can offer, I'd really like to be converted (mainly because if I AM my boss has promised to buy me a licence when my 30 days are up!) :-)
All the best
Steve

To expand a bit on Colin's comments, back in the film days, the concept of Handles was easy to grasp, as the pieces of film were on an A and a B Roll, and the editor had to physically overlap them by the desired amount, so that the lab could print with a Dissolve. The same held for the days of A-B Roll digital editing, where the Clips were again physically overlapped on separate Tracks. Then, digital editors were developed that allowed one to edit with the Clips on a single Track, and where Transitions were applied between them. The Handles were necessary still, but were no longer visually obvious.
These images will tell you a bit more about the concept:
Hope that this helps,
Hunt

Dynamically linked After Effects comps causing Premiere to freeze (after latest updates)

Normally in a dynamic link, any changes made in After Effects would be displayed in Premiere within a few seconds. However, after the latest software updates... it now takes 1-2 minutes and the Premiere interface is completely frozen during that time.
Anybody else having similar issues?
-Pete

Hi, thanks for the link but I'm having a different issue. My Premiere interface actually freezes and I'm unable to use Premiere for 1-2 minutes.
App Nap is disabled for all Adobe apps and I do frequenly empty my Adobe Media Cache and After Effects disk cache and it doesn't prevent the freezing.
Or sometimes just having a dynamically linked After Effects comp on the timeline slows Premiere down to the point where even scrolling through assets in my project panel is very jerky.

Cannot render After Effects Comp to Quicktime, Lossless

Hi,
I am trying to do a very simple test animation using Video Copilots Optical Flares, an imported PSD file for lettering and a JPG for a background image.
Below is the error I keep getting:
And below are my settings:
I tried some other settings and the file would render but there would be a large green area as if it were an interlaced image. I turned field rendering off (then on, same thing)
I am using an 3.06 GHz iMac, with 4 GB RAM, and After Effects CS5.5.
Any help would be GREATLY appreciated.

Could be a file allocation problem, because your drive is too large. Some legacy CoDecs cannot deal with drives larger than 1TB, because their metrics are from an age where files could not be larger than a certain size and the math simply fails. Try rendering the same file to a smaller volume to test...
Mylenium

Not Able To Install After Effects Cs6 Trial

I am currently using a macbook pro 13 inch with mountain lion software at version 10.8.2
I am not able to install the after effects cs6 trial
I tried to turn off my proxies and vpn, but it still does not work
I also tried to restart my computer and tried to install it again but still nothing happens
the error problems i clicked onto
Exit Code: 15 -------------------------------------- Summary -------------------------------------- - 0 fatal error(s), 0 error(s), 0 warning(s) -------------------------------------------------------------------------------------
System Requirements
I was able to install the trial on my imac with the same account, it opened normally
How come my macbook pro could not install it

Exit code 15 installing
And not to point out the obvious: a 13" MBP may not meet the system requirements due to the limited screen resolution.
Mylenium

Bug and workaround: Transparent areas in After Effects are opaque in Premiere Pro using Dynamic Link

There's a bug that causes transparent areas in dynamically linked After Effects CS5.5 compositions to be opaque in Premiere Pro in some circumstances. See this for details and a workaround:
http://forums.adobe.com/message/3682118#3682118

Thanx for that Todd
I had experienced the issue just yesterday and was wondering why ...and then what, was I going to do about it.

After Effects AND/OR Premiere Pro CS5 ?

Hi guys,
I am quite new, I have only done one videoproject and that was in Premiere Pro CS4. Now I got a new machine and have both Premiere Pro CS5 and After Effects. I have started learning AE from some videos and it is quite impressing what you can do there. So I hope I can use AE to improve my videos.
My question is, shall I do the project in PPCS5 and then connect to AE for making special effects on clips or shall I do the whole project in After Effects ?
If I choose AE for the project, will I miss some functions from Premiere Pro?
Many thanks in advance !
Sven

Thank you guys!
You put me on track, expecially with the link!
From beginning I am just taking care of old videos that noone look at because not edited so most of the time just crap.
I want to edit them, try to improve color and sharpness but also add some funny elements so they are more interesting to watch.
I have 30 videos from my daughter, each 1 hour and 8 of my own (really crap) and 8 VHS from a friend. That is just to start with.
Start Adobe Premiere Pro from within After Effects and capture footage for use in After Effects. (See Use Adobe Premiere Pro for capture (Production Premium and Master Collection only).)
Use Adobe Dynamic Link to work with After Effects compositions in Adobe Premiere Pro without first rendering them. A dynamically linked composition appears as a clip in Adobe Premiere Pro.
Use Adobe Dynamic Link to work with Adobe Premiere Pro sequences in After Effects without first rendering them. A dynamically linked sequence appears as a footage item in After Effects.
Start After Effects from within Premiere Pro and create a new composition with settings that match the settings of your Premiere Pro project.
Select a set of clips in Adobe Premiere Pro and convert them to a composition in After Effects. "
So with a testvideo I will start using these 5 different methods so I learn when to use which one!
And I also have 4-5 videolessons to watch.
Thanks again!
I probably be back soon with more questions!

Adobe Premiere Pro CS5 Dynamic Link not working as part of Production Premium CS5

I ran into a situation whereby I recently reinstalled my Production Premium CS 5 onto a new computer and when trying to run the Dynamic Link out of Premiere PRO CS 5 to create a new After Effects composition, After Effects tried to start up but then crashed with the error that Production Premium was needed.
Yet, I had Production Premium CS5.
(Note: The crash didn't occur when I simply tried to use Dynamic Link without anything selected in my project or timeline - but the moment I had a clip in my timeline selected to work on it, the dynamic link would not work as covered above.)
In checking around the forums I found various answers to this problem such as rebooting the computer, reformatting hard drives and/or whatever. This all may be correct.
However, as I just went through that nightmare, I was not anxious to do that again. So, I called Adobe and the following solution solved the matter in 5 minutes:
1. Close all your other Adobe applications such as After Effects.
2. Open up Premiere Pro CS5 and then deactivate it by going to HELP>DEACTIVATE and then Permanently Deactivate.
3.Close the application and restart Premiere Pro CS5.
4.Then do the same to Activate it.
5. Have your serial number handy and plug it in when prompted.
Solved it right away and worked beautifully.
Not to say there couldn't be more complicated situations, but the above worked and the simpler the better is good for me. And I thought I would post this in case anyone else ran into this problem.

Thanks for posting your solution.

Adobe Media Encoder CC renders do not reflect changes to Dynamically Linked After Effects Comps

When rendering a Premiere timeline with a dynamically linked After Effects composition, Adobe Media Encoder will sometimes use an older version of the linked composition (even after I have saved changes in the After Effects comp).
For example, if I correct a spelling mistake on some text in After Effects, save the composition, and then add the sequence to the render queue in Premiere, the final output from media encoder still has the old spelling.
If I do a straight export from Premiere instead of adding to render queue, the output is always correct. I've noticed this problem on several different Windows 8.1 systems.
All versions of the software are up to date as of today.
Why is this? Is it something to do with the disk cache in After Effects? Does media encoder have it's own cache that I need to clear?

Hi, I've been having this same issue. Here are some additional things I've noticed about it:
Changes are reflected properly when played back on timeline in Pr CC 2014.
Happens regardless if the dynamic link file was rendered or not, thus deleting the render files does not fix the issue.
The issue can persist through saving, closing, and reopening both AE and Pr.
I'm using OSX 10.9.4, so this is not just a PC issue.
Other than manually watching for every change to be reflected in the render, there is no way to know a problem has occurred. Needless to say this can be incredibly costly.
Please address this quickly, it's completely unacceptable that what we render out could be a different version from what we see on the timeline.
PS Some additional things I will be testing:
Does the issue persist through closing all CC apps, including Media Encoder.
Does rendering directly out of Pr, i.e. not using Media Encoder, fix the issue.

Error with "Replace wtih After Effects Comp"

When I use "Replace with After Effects Comp" on a clip in Premier CS5 (Mac), it sends the clip properly, I make my effect in AE (stabilize motion), save, then go back to premier and there is not change to the clip in premier (the change was clear and obvious in AE). In the lower right is a red circle wth an X -- clicking on it indicates "an unspecified error ocurred performaning an action" on the saved AE file.
The clip in Premier is marked red and indicates it is linked to the AE file, but the applied effect has not come through, it just looks like the original.
However, when I make other changes in AE, sich as adding text, no problem -- it updates in Premier.
What could be preventing "Replace with After Effects Comp" from workgin with AE stablizie image tracking files?
Using CS5 on a Mac (10.6.7) wiht the latest updater updates installed on all CS5 products)
Really stuck here. Thanks!
-August

Can I not render wihin AE and have the rendered clip automatically link into Premier?
This method should give you realtime playback of your Ae comp
in the Pr timeline, but you will still have to render first.
Use the "Post-Render Action" in the Ae render queue to import your
completed render into your Ae project, then drop it into your
composite as the top layer, solo that layer, then save and exit.
Open Pr, and you should be able to play the composite without
having to render the timeline... unless there is a deficit in the
horsepower of your rig as Jim suggested in an earlier post.
Post-render actions
http://help.adobe.com/en_US/aftereffects/cs/using/WS3878526689cb91655866c1103a4f2dff7-79d5 a.html
Here are some useful links courtesy of Todd Kopriva:
Working with Adobe Premiere Pro and After Effects
http://help.adobe.com/en_US/aftereffects/cs/using/WS4648B7F7-2D89-4765-BC8A-271D9A7574A3a. html
FAQ: What is the best format for rendering and exporting from After Effects?

Program monitor constantly freezing/stalling when playing dynamically linked After Effects comps

I'm having program monitor issues when I try to play dynamically linked After Effects comps from my Premiere timeline. I realize it's expected to have jerky playback since After Effects comps are memory and CPU intense, but it doesn't seem normal for these things to happen:
Sometimes during playback, the program monitor completely freezes while audio continues to play and the CTI continues to move along timeline. When this happens, there's no way to stop the playback at all using mouse or keyboard... so I'm forced to just quit Premiere and re-open project.
Program monitor can also freeze when I place the CTI on top of the After Effects comp. Sometimes if I wait a minute, the screen could update and eventually display the After Effects comp.
I'm unable to render effects on the Premiere timeline because it just hangs at "Rendering frame 0" and never advances forward.
There's nothing special about the After Effects comp I'm linked to... it could just be regular text that I animated using ease keyframes and motion blur.
I originally thought it was related to GPU settings but it doesn't make a difference if I set After Effects to use CPU instead of GPU or set Premiere's Mercury Playback engine to software, CUDA, or openGL. I even have the latest CUDA drivers installed on my Mac. But I must mention that this issue got significanly worst after updating to OSX 10.9 Mavericks.
Here's my system details:
OSX 10.9 Mavericks
Premiere 7.0.1 (105)
After Effects 12.0.1.7 (I installed the OS X Mavericks crash update fix)
The most prevalent error messages displayed in the OSX console is:
Adobe Premiere Pro CC[402]: dynamic_cast error 1: Both of the following type_info's should have public visibility. At least one of them is hidden. N5dvaui2ui8MessageTIKNS0_7UI_NodeEEE, N5dvaui8controls23UI_PictureSupplyMessageE.
Here's a few that are less common:
Adobe Premiere Pro CC[402]: [PremiereCocoaMacApplication handleMenuCommand:1633841013 from <DVAMacMenuItem: 0x6100002f8300 About Premiere Pro>]
After Effects[377]: -[NSMenu menuID]: unrecognized selector sent to instance 0x600000077080
If anybody has any ideas or suggestions, I would really appreciate it.
Thanks,
-Pete

I think I found the problem... OSX Mavericks introduced a power saving feature called App Nap that basically slows down an app that appears to be doing nothing or is minimized in the background.
So essentually when I try to display an After Effects dynamically linked comp via my Premiere timeline, it freezes because OSX put After Effects to sleep.
To fix this, I had to disable the App Nap feature on After Effects. Now everything is performing back at pre-Mavericks levels (which is about 10% stalling playback issues vs 90% stalling). I also noticed that all of the console errors went away.
To disable App Nap in OSX...
Go to your Applications folder
Expand the After Effects CC folder
Right-click on "Adobe After Effects CC.app" and select Get Info
Add a checkmark beside "Prevent App Nap"
Restart the application
I also did this with all my Adobe apps just to be safe.
Hope this helps
-Pete

How can I sync up my clip in Premiere Pro with the After Effects Comp I replace it with? How do I link them?

I am having some issues seeing a tracked mask work correctly in Premiere Pro. I clicked on my clip in my Premiere pro project and hit "replace with after effects comp". After correctly masking out everything in AE and tracking it to perfection, I clicked save and went back to my Premiere project. However when I view the new "linked" clip in my project it has dropped frames. The mask seems to track correctly but the dropped frames are an issue. Does anyone know how I could fix this?
Thanks,
Ajnies

When I return to the linked clip in my Premiere project, it does not contain every single frame of the original after it has been replaced by the AE comp. It skips about every other frame. I am doing a stop motion animation so this is highly noticeable.

Rendering After Effects Comps can be very slow

I have a PP CS6 project which has quite a few in-line After Effects comps in the main sequence. The are all image stabilisation (for clips which are are of a different size of the sequence). When I render then most of fairly quick (several frames a second) but some are very slow (a frame every few seconds). The settings on the warp stabilise is the same for all of them. It seems to be the longer clips that cause problems (sometimes over 30 secs). Anyone know why or got a way to speed up the longer clips?
Ben

Captain Mench wrote:
Now -- if you need to export an alpha channel out of AE then you'll need some specific formats.
Good luck,
CaptM
Welcome home, Mench!
To maintain the alpha channel from AE, the OP will want to look up how to be using two codecs, Animation and ProRes 4444. Both are extensively described in the help system for FCP and After Effects or just google them for several hours of interesting reading. The OP will also need to understand the concept of an alpha channel which, come to think of it, was difficult for me.
bogiesan

After Effects CS6 and Premiere Pro CS6 not available for installation for 32-bit systems

After Effects CS6 and Premiere Pro CS6 require a 64-bit operating system and processor to be installed and run.
If you subscribe to Creative Cloud but use a 32-bit computer system, you will not be able to download and install Premiere Pro CS6 or After Effects CS6.
This issue primarily affects users on the Windows operating system, since all supported versions of the Mac OSX operating system are able to run 64-bit applications.
See this document for details:
"64-bit Windows required for After Effects and Premiere Pro CS6"
In general, you can only download and use applications for which your computer system meets the minimum system requirements.
Premiere Pro system requirements
After Effects system requirements

Who's says that Microsoft can't debug?
I used msconfig, first disabling startup items, -same result.
Enabled all startup items, disabled all non-microsoft services - AE worked!
I re-enabled each service in turn until AE crashed.
The fault was related to an item for a video streaming device I have in my house. It was Monsoon-multimedia's Vulkano Service. Sometimes under the old name of Hava, this is an app that acts like a sling-box to send my Cable TV to my screen. It does load a couple of virtual devices in device manager, and uses a proprietary codec.
I uninstalled the vulkano streamer application and rebooted the external Vulkano device. I reinstalled the Vulkano and verified it connected to the device and could stream. Once it did, I tried AE again and IT WORKED!
I wonder if simply rebooting the Vulkano would have fixed it. Its like opening the garage door to turn on the refridgerator.
Thanks for the help!
Jim

Making new after effects comp question

If i go to file>adobe dynamic link>new after effects comp is there anyway i can make the length of the comp depending on my in and out on the timeline i want or am i forced to have a standard automatic 30 seconds that it makes for me?

What is that suppose to mean? I sent in a request to have this implimented as a feature in the next update, we'll see how that goes. I understand that you can make the duration edit inside the composition setting, but why should i have to do that? Doing this and then relining it up back in premiere wastes time. I should be able to do it based on the In and Out on my timeline.

Not able to render After Effects comp in Premiere CC Pro using Dynamic Link

Similar Messages

Maybe you are looking for