Not able to replace new query in old workbook

Hi All,
I am having a workbook on a query which was developed long back,due to few changes i created new query and now i want to replace that query in old workbook which it is not allowing also tried to create new workbook with new query but when i run workbook it shows no applicable data found ,when i run query the data is coming.
I need all your suggestion on this
Regards
Deva

Hi Dev,
Open your Workbook and Go to the Sheet in which the desired query (to be removed) is embedded.
In the "BEx Toolbar" 3rd Last Icon if you place cursor on it it will say "Tools" > Click on Tools and you will see an Option "Remove Query" or if you want to remove All queries from Work book there is another option Tools> All Queries in Workbook --> Detach.
This will remove the Query from Workbook.
Then in same Tools--> you can see Insert Query click on it and point (select) your new Query.
This will insert the new query in Workbook.
Save the Workbook.
Hope this will resolve your issue.
Do post back if you face any probs.
Thanks
CK

Similar Messages

I am not able to download new nor update old apps

How can this be fixed?

Have you tried to reset your iPad? Reset the iPad by pressing and holding the sleep/wake button and the home button for 10-15 seconds until the Apple logo appears, ignore the red slider. Then turn back on. You won't lose any data doing the reset.

We have migrated data from virsa 4.0 to grc 10.1, all virsa mitigation approvers and controllers got migrated but we are not able to map new mitigation approver and controller to the mitigation ids.

Hello All,
We have migrated data from virsa 4.0 to grc 10.1, all virsa mitigation
approvers and controllers got migrated but we are not able to map new
mitigation approver and controller to the mitigation ids.
The steps we have done below.
1. We have created user id in su01 with necessary authorizations
2. we have declared this user id in Access control owners as a
mitigation approver and assigned to the organization unit
Now we are trying to map to newly created mitigation approver to the
mitigation id but we are not able to find that approver id for the mitigation ids. (only old mitigation ids came from VIRSA only we are able to see, not able to add new mitigation approvers / controllers to the mitigation ids)
Kindly check this issue, this is very critical for us.
Thanks in advance.
Regards,
Karunakar

Hi Karunakar,
- Assign Owners to Organization unit
- Make these owners as Mitigation Approver and Monitor
- Create Mitigation Id in this Org. unit
Regards
plaban

Why is Siri not able to learn new names?

I have a refurbished fifth generation iPod Touch that was recently sent to me as a replacement for my new fifth generation iPod Touch that was sent in for repair for a broken microphone. Today, I tried to "teach" Siri to say my name properly and the message I got back was, "Sorry. I am not able to learn new names right now." Is there something I can do to fix this?

Okay. Thank you. It is still not allowing me to "teach" it to say my name. I never had this issue with my other iPod Touch. I will let you know if this problem persists.

I have reset my Mac password, but still am not able to download new software due to unrecognized password!!

Please help me reset my password to "set-up." I have already reset my Apple password, but am still not able to download new software.

Are you the administrator on the macbook and are you the only account? In system preferences-system accounts,. You have all the users for the macbook. At the top you have password and login. you should be in password. On the left is the accounts. You should click on the one that is the administrator account. On the right is a bar that says change password. You click on that. It will go to another screen wear you enter your old pasword and then you new password. Then verify, then add hint if you want . Then click change. Do you see a little box with a key in it beside the enter new passward, that is for keychain. Your admin. password and keychain passwords have to match. That lets you download and open accounts, do updates ect. Doing this way sets admin and keychain pasword. If you keychain password is different than you admin password, that will stop you from downloading new software. Go to apple -support and beside support in search type in KB/h1631 then hit return. That explains keychain an how to change it if you have to.

Not able to create new e-mail on N8 using Mail for...

Not able to create new e-mail on N8 using Mail for Exchange.
Currently using google for my domain, but settings are the same as explained on the google Sync webpage: http://www.google.com/support/mobile/bin/answer.py?hl=en&answer=147951
When creating reply on mail the application crashes. When creating new mail it says "Kan bewerking niet uitvoeren" in english: "Unable to execute action".
Any idea why creating mail is not possible?
Regards,
Joris

problem is known
more info there:
/t5/Nseries-and-S60-Smartphones/N8-syncing-with-Google-contacts-amp-calendar/td-p/772020
there is little workaround aslo.

HT1222 I bought used iPhone and on this iPhone I'm not able to make new account on i Cloud'. How can I use this iCloud's on used iPhone Please help me

I bought used iPhone and on this iPhone I'm not able to make new account on i Cloud'. How can I use this iCloud's on used iPhone Please help me
When I logging there it told me that maximum no of iCloud's Account already activated on this iPhone.
Please help me how can I open new iCloud's account on this iPhone
Regard
Faiz khan

Set up the account using a desktop or laptop, then sign
into that account on your iPhone.
I am not aware of any method around the restriction once
the maximum has been created on any individual iPhne.

I wonder how pro photographers use aperture?I shoot raw and my harddrive is alreay full.I'm not able to import new pictures.Is it ok if i create a vault and delete all my projects in the HD.Can I use an external HD use aperture through the vault??

I wonder how pro photographers use aperture?I shoot raw and my harddrive is alreay full.I'm not able to import new pictures. I don't know what to do. I created a vault. My plan was to create a vault(put all my master files into an external harddrive) and then delete all my projects in my mac pro's harddrive. Is it the correct way to do it ? What should I do if I have thousands of raw files ? How should my workflow be? Can I use an external HD and use aperture through the vault,without keeping the master files on my computer's hard drive?? Or should I shoot raw+jpeg and store raw files in an external backup harddrive and import only jpegs into my aperture library?

There's a bit to learn. It will slowly make sense.
Aperture is an empty field. You're given a tractor and a whole bunch of attachments. What you grow, how, and where, is entirely up to you.
Vaults are for back-up and only for back-up. They have nothing to do with storing your working files.
When your Library outgrows your system drive (and for good performance, you should leave c. 20% of every drive empty), it's time to convert some of your image's Masters from Managed to Referenced. ("Managed" and "Referenced" refer to Masters, not to Libraries.)
There are hundreds of posts in the forum, and several pages in the User Manual on using Masters.
Many people run Aperture with the Library on their system disk, and most (or all) of their images' Masters on external FW drives. This is a good set-up. Note that you will likely have to take steps to back-up the data on your external drives.
If you do the above, there should be no reason to delete any Projects.
The choice of RAW or RAW+JPEG or JPEG depends on the kind of work you are doing. I capture RAW only -- but I don't do any commercial shoots. Pros on deadlines report that the RAW+JPEG works well for them. Capture JPEG if it saves you time. IMHO, there is not a good reason to shoot JPEG to save space (space is cheap; time expensive).
Short-term solution: buy and use a FW800 external 1 TB drive, formatted "Mac OS Extended (Journaled)", and using Aperture relocate the Masters of all images older than 30 days to that drive. (Be sure to change your back-up strategy to include this new drive; you may need a second new drive.)
This general post of mine might help you understand more about Aperture.

Not able to create new folder in list/library sharepoint 2013 foundation

I am not able to create new folder in library and also not able to edit existing list item
Below is the error:
Getting Error Message for Exception
System.Web.HttpUnhandledException (0x80004005): Exception of type
'System.Web.HttpUnhandledException' was thrown. --->
System.NullReferenceException: Object reference not set to an
instance of an object. at
Microsoft.SharePoint.WebPartPages.ListFormWebPart.EnsureList()
at Microsoft.SharePoint.WebPartPages.ListFormWebPart.EnsureListAndFor
m() at
Microsoft.SharePoint.WebPartPages.ListFormWebPart.UseLegacyForm()
at Microsoft.SharePoint.WebPartPages.ListFormWebPart.CreateChildCont
rols() at System.Web.UI.Control.EnsureChildControls() at
Microsoft.SharePoint.WebPartPages.WebPart.get_WebPartMenu() at Mi
crosoft.SharePoint.WebPartPages.ListFormWebPart.CreateWebPartMenu()
at Microsoft.SharePoint.WebPartPages.ListFormWebPart.OnLoad(Ev...
Please help.It happens only on few sub sites

Hi V_K04,
You said that it happened only on few sub sites, whether this issue occurred on some subsites, and some subsite worked well.
Please check whether there are some differences between the subsites that worked well and the problematic subsites.
Whether this issue occurred on all libraries and lists on problematic subsites.
Whether there are some customizations in these problematic libraries and lists.
Please create a new library and a new list, test again, compare the result.
BestRegards,
Wendy
Wendy Li
TechNet Community Support

Ipod sync issue with rhythmbox or banshee in linux - not able to view new songs in ipod

Ipod nano with version 1.0.2 PC with serial number DCYLLQWTF0GP with model MD477HN, cant be sync with rhythmbox or banshee in linux. I am not able to see new list of songs in ipod

My contact number is - 9999504380 (Delhi,India)

Not able to create new entry in RSADMIN Table

Hi All,
        I am going thru the OSS note 1275837 (Note 1275837 - PrecServer: process based load distribution (ABAP part)), as it recommends
        add the entry "BWPREC_USE_NEW_LOAD" with value "X" in table "RSADMIN"
      When I check in SE11 and SE16 there is no option to create button for above entry in table RSADMIN.
      Please advise for any help to create above entry.
Thanks
Ganesh Reddy.
Edited by: Ganesh Reddy on Jan 11, 2010 4:20 PM
   I got access key from our basis team. But still not able to create new entry as mentioned in OSS note. Any further help....
Thanks
Ganesh Reddy.
Edited by: Ganesh Reddy on Jan 11, 2010 9:13 PM

Hi
Goto SM30 - Table Maintanance Generator and enter the table name and click on button maintain ,it will show the error message
"The maintenance dialog for RSADMIN is incomplete or not defined" because the table maintenance is not allowed manually.
First Option
When you double click the error message a performance assistant screen will open in that you can see Procedure
"Generate the required maintenance dialog" click on that and try to maintain the table using Access Key, as i dont have access key i have not tried this option.
Second Option
You can write an SE38 program with an insert statement.
TABLES rsadmin.
DATA: wa TYPE rsadmin.
wa-object = 'object name'.
wa-value = 'X'.
INSERT into rsadmin values wa.
Thanks

Not able to create new users or groups

hi all,
We have configured multiple LDAPs by changing XML file.
But now we are not able to create new users or groups.It is giving error saying that "Adapter is configured as read-only"
Can anybody help me out in this problem.
Thanking You,
Amol.

For multiple LDAPs to work we have downloaded the Xml file namely "Flat hierarchy + Database "
We made the necessary changes and then uploaded it.
Now we want to create users or groups in portal-database and not in LDAP. But it is throwing error saying that "Adapter is read only". We suppose that it is trying to create users and groups in LDAP.
So can anyone help us to create users or groups in portal-database.
Thanking You,
Amol.

How come I am not able to open new tabs? I clicked on new tab and I've tried to click on the + sign next to the current tab, but still I am not able to.

How come I am not able to open new tabs? I clicked on new tab and I've tried to click on the + sign next to the current tab, but still I am not able to.

Ask toolbar is the culprit...Thanks!!!

I am not able to update newer version on my iphone. Getting error An unknown error occurred (-9808)., I am not able to update newer version on my iphone. Getting error An unknown error occurred (-9808).

I am not able to update newer version on my iphone. Getting error An unknown error occurred (-9808). PLease provide solution for this. I have tried connection setting all in existing discussions. Still facing issues with update iOS.

Hi there,
I would recommend taking a look at the troubleshooting found in the article below.
iTunes Store: "An unknown error occurred (-9808)"
http://support.apple.com/kb/ts2753
-Griff W.

I am not able to start my 3 days old iPhone 4s

I am not able to start my 3 days old iPhone 4s

Is your phone charged? If so, perform a reset:
iPhone Reset:
Press the sleep/wake button & home button at the same time, keep pressing until you see the Apple logo, then release...can take 10 ~ 15 seconds of button pushing.

Not able to replace new query in old workbook

Similar Messages

Maybe you are looking for