Not able to reply or answer to questions asked

when i try to reply to any questions i get this message An error occurred while trying to submit your post. Please try again. i tried logging out and logging in but still no use. Its been 30min now but im still not able to reply to any questions asked

hi user,
here also same. i posted the same.
but the message is somewhat different https://forums.oracle.com/thread/2563659

Similar Messages

  • SRM 7.0 RFx: Supplier not able to reply to Header level questions

    Hi Gurus
    I am currently working on SRM 7.0. I am facing a strange issue.
    While creating an RFX I am able to create questions as both item level and header level and able to assign weights to the same.  I am also able to  see questions along with weights at the supplier's end however when I try to create bid it shows weights at header level questions as zero and the supplier response to the question is also not accepted.
    For questions at item level it is just working fine.
    Please suggest what could be wrong. waiting for your replies.
    Sohil

    Daniele,
    it could be due to multiple purchasing org. assignment to the suppliers.
    Regards
    Konstantin

  • I have inadvertently infringe copyright on facebook and they have subsequently barred me from uploading any more videos. The question I need answered is ( and not able to find the answer on any of you help pages).....  Do the following have free copyright

    I have inadvertently infringe copyright on facebook and they have subsequently barred me from uploading any more videos.
    The question I need answered is ( and not able to find the answer on any of you help pages).....
    Do the following have free copyright to publish on facebook and U Tube?
    1.Garage band sounds?
    2.Slide show...Sample music and Theme music?
    3.iMovie...iMovie sounds and iLife sounds ie.Medal Ceremony and Memorial etc?
    I note one can publish to shared net places directly from iMovie so one assumes these are copyright free for non-profit making and non-comercial use.
    It is impossible to contact apple direct.No email address.We put our selves at risk without this knowledge and like applemac, facebook will not communicate direct.Will applemac please take responsibility for copyright/the above that they are all too willing to sell to us but not support us with that knowledge.
    I have Mac OS X Snow Leopard version 10.6.2 (2009 bought in 2010)

    Thank you Klaus1.The large font, I copied and pasted from my mail box.I'm visually impaired...not to a huge degree but it helps to use the large font.I believe you are right about the copyright on the imac stuff but if facebook decide otherwise, you have to reply electronically to their challenge.If you can't provide a reference directly from the copyright owner then they remove the video.I believe this is a programmed response and no human is involved which now makes it impossible for me to get my video uploading restored.They detect added soundtrack automatically and then challenge.There are many others in the same boat and facebook will not communicate.They have various discussion sites on which I have left messages including Mark Zuckerbergs own facebook but I don't think anyone from facebook ever reads them.I intend to start a second facebook which I can use purely to get my videos uploaded as a lot of my friends enjoy them BUT don't want fall foul of their programming again.If only iMac would put something on the net to this effect.I think it is so unfair that with modern technology it is impossible to contact these large conglomerates personally and receive an email response.I tried emailing [email protected] but I got a failure notice.If you have any ideas on how to get verification from apple direct, I would be very grateful.Thank You.

  • Not able to reply questions

    dear team,
                     i am not able to reply any questions. kindly help

    If you find that you can't reply, perhaps the best way to let us know will be by creating a new thread over in the sandbox:
    https://social.technet.microsoft.com/Forums/en-US/home?forum=tnsandbox&filter=alltypes&sort=lastpostdesc
    EDIT: For anyone else reading this thread, the OP still could not reply. I've suggested contacting fissues directly.
    Don't retire TechNet! -
    (Don't give up yet - 13,085+ strong and growing)

  • Not able to reply questions -- still not able to reply

    dear team,
                still i am not able to reply kindly help

    What exactly is happening when you try to reply? Are you getting errors?
    If you're able to post a screenshot of the issue, please do so. If you're not, please describe the situation in as much detail as possible.
    Don't retire TechNet! -
    (Don't give up yet - 13,085+ strong and growing)

  • I am not able to open your answer for some reason my computer is not opening it in Explorer, it's not responding and I keep getting error messages and I don't know how to open it in another browser when Explorer experiencing issues. Heather

    I am not able to open your answer for some reason my computer is not opening it in Explorer, it’s not responding and I keep getting error messages and I don’t know how to open it in another browser when Explorer experiencing issues.
    Heather

    If you  have IE version 10 go to TOOLS and change the option to use Compatibility View

  • I forget the secret answer of questions asked by account. I have also updated by account wiht alternative email (resque) but i am not getting any email from Apple. please help.

    I forget the secret answer of questions asked by account.
    I have also updated by account wiht alternative email (resque) but i am not getting any email from Apple for the restoreing my secret Ques Answer
    please help.

    The Best Alternatives for Security Questions and Rescue Mail
        a. Send Apple an email request at: Apple - Support - iTunes Store - Contact Us.
        b. Call Apple Support in your country: Customer Service: Contact Apple support.
        c. Rescue email address and how to reset Apple ID security questions.

  • I have installed oracle 10g in my winxp machine. i am using enterprise manager. i am not able to shutdown the system as it asks for os username and password. i have provided my os username and password but eerror persiste. somebody pls help me to get rid

    I have installed oracle 10g in my winxp machine. i am using enterprise manager. i am not able to shutdown the system as it asks for os username and password. i have provided my os username and password but eerror persiste. somebody pls help me to get rid of this.

    Here I am using Java Type IV for database
    connection.
    So,there was no necessity of creating DNS.How your app communicates with db shouldn't matter for the end user. Still, you may want to use a functional network name also for the thin client driver connection string.
    So,is there any other way to solve this problem.What is the problem really? Do you not use dns for network naming? Maybe you have to manage the hosts file on every client then.

  • Not able to edit credit card because it asks for security code of the expired one which has been disposed

    Not able to edit credit card because it asks for security code of the expired one which has been disposed

    Try tapping on NONE and then tap on DONE to remove the payment information, then go back in and try to add the new card if you want one on the account.

  • HT5624 I Am not able to open my IPAD - it is asking for a "Pass Code"  what is this?

    I am not able to open my IPAD - it is asking for a "Pass Code"  what is this?

    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • HT1920 forgot the answer to question: asks first job and favorite car

    forgot the answer to question: asks first job and favorite car

    You need to ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, phoning AppleCare and asking for the Account Security team, and filling out and submitting this form.
    They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
    (102965)

  • During setup of new Apple TV I am not able to progress past the screen that asks if I want to share usage info with Apple.  Using both wireless and hardwire setup I've answered no - then yes - but I cannot get the system to accept an answer. Anyone else?

    Aside from not being able to progress past the question of sharing info with Apple  - I've also noticed that the remote does not function when I presss the "select" button - only when I press the "menu" button can I acknowledge a question or a step in the setup proccess.  Help!

    From: Test Screen Name [email protected]
    Sent: Sunday, August 04, 2013 11:32 AM
    To: gunner0490
    Subject: I'm not able to open PDF files in Adobe Reader XI.
    Re: I'm not able to open PDF files in Adobe Reader XI.
    created by Test Screen Name <http://forums.adobe.com/people/TestScreenName>  in Adobe Reader - View the full discussion <http://forums.adobe.com/message/5565198#5565198

  • Not able to get rid of a Question mark in the Dock

    A friend got stuck with a Question Mark in the Dock of his 4 year old iMac that was linked to an app not compatible anymore with his latest 10.8.2 version ( guess it was a Power PC app, before Mountain Lion, he was still on Leopard ). He apparently deleted the app and some dependencies manually ( instead of using App Cleaner & Co. ) and now whenever he is hovering over that Question Mark, even before being even able to pull it out from the Dock, the screen flashes up white and the Finder resets.
    Is there a way to access the Dock through an element of his user library to get rid of that Mark, or even through a Terminal command ( not that I like to delve in there, but Terminal commands have helped me personally quite often ) ?
    Does the Dock have a dedicated place in the Library's User Folder ? Couldn't find anything on my own Mac.
    Thanks for any clue ....

    Right clicking on it is not even an option, just hovering over it seems to induce a "nuclear" reset of the whole desktop and graphic card on the iMac.
    Have meanwhile found a possible solution by erasing the dock preference file in the user/library/preferences folder to reset the dock to it's default state. Will try this out through a Skype conversation with that Buddy.
    Was seen here :
    https://discussions.apple.com/message/16447109#16447109
    Thank you for stepping in. Good to know that people are still willing to help in this community.
    Greetz to the UK from France

  • Apple genius not helpful, maybe posters will answer my questions

    I recently went to my local Apple Store to talk to a 'Genius' about my 80gb ipod classic that will not sync more than 200 songs before freezing. My 'Genius' asked if I had a Mac or PC at home and I said PC and without missing a beat he smugly suggested that my PC might have a 'bad driver' that corrupted either the software or hard drive of my ipod. He promptly told me that I can either buy an refurbished ipod of the same model for a discounted price or buy another, newer model with 10% off with the trade-in of my corrupted ipod then sent me off angry that I just wasted almost an hour waiting after my appointment time.
    My question is in three parts. If you only want to answer one that is fine.
    A.) If it was a bad driver that caused the corruption on the ipod, how can I avoid this issue in the future if I chose to purchase another Apple brand Mp3 player? Just by keeping up with driver updates and avoiding sites that might contain malware?
    B.) The ipod started acting up on my last pc, which I dropped on a brick floor pretty hard and went on questionable sites on. But I've since gotten a newer model laptop pc with tons of space and the ipod is still acting the same way. There is no corrupted warning when I plug it in, it just will not sync all of my library and after syncing a couple gigs the screen changes from the 'syncing' screen to the 'connected' screen and itunes freezes. Then I cannot eject the ipod through itunes or even through the windows 'safely remove' feature. This is on the new laptop. What does this mean??! Corrupted software or hard drive??
    C.) Has anyone had a positive experience with an Apple genius? My experience was very horrible and the genius was a jerk. Is this common?

    From your description my first concern would be for the health of the iPod's hard drive. <hr>
    *iPod Diagnostics*
    Take your iPod and place your right thumb on the centre SELECT button and your left on the top MENU button. Press down both thumbs for about 6 seconds until your iPod reboots. Immediately move your left thumb around to the rewind button |<< on the left and hold this down together with SELECT for a further 6 seconds. Your iPod should now switch into Diagnostic Boot mode. Press MENU for *Manual Test*, then select *IO > HardDrive > HDSMARTData* to reveal your stats. For comparison here are mine for my 2 year old 6th Generation Classic:
    Retracts: 889
    Reallocs: 12
    Pending Sectors: 0
    PowerOn Hours: 2202
    Start/Stops: 894
    Temp: Current 24c
    Temp: Min 10c
    Temp: Max 50c
    Take a note of your results. When finished press *SELECT & MENU* for 6 seconds to reset the iPod again.
    With modern disc drives sectors are no longer marked bad by a disc scan, if the SMART firmware detects a sector it has trouble accessing it will attempt to invisibly reallocate it to a spare area of the disc.
    Note that I've only 12 remapped sectors and none pending. To help explain what the numbers mean here is an extract from the Wikipedia S.M.A.R.T. article:
    *Reallocated Sectors Count*
    Count of reallocated sectors. When the hard drive finds a read/write/verification error, it marks this sector as "reallocated" and transfers data to a special reserved area (spare area). This process is also known as remapping, and "reallocated" sectors are called remaps. This is why, on modern hard disks, "bad blocks" cannot be found while testing the surface – all bad blocks are hidden in reallocated sectors. However, as the number of reallocated sectors increases, the read/write speed tends to decrease. The raw value normally represents a count of the number of bad sectors that have been found and remapped. Thus, the higher the attribute value, the more sectors the drive has had to reallocate.
    *Pending sector count*
    Number of "unstable" sectors (waiting to be remapped, because of read errors). If an unstable sector is subsequently written or read successfully, this value is decreased and the sector is not remapped. Read errors on a sector will not remap the sector (since it might be readable later); instead, the drive firmware remembers that the sector needs to be remapped, and remaps it the next time it's written.
    Large numbers of Reallocs or Pending Sectors would suggest your drive is failing and that you may need to repair or replace your iPod. Check your stats after another attempt to update your iPod. If the numbers increase that again points to hard drive failure. While it won't be good news at least you'll know it isn't some random software problem and you can decide what to do next.
    <hr>
    Turning back to your post:
    A.) While an incorrect driver/driver conflict might cause the wrong data to be written to the iPod, hence corrupting it, if you then update the drivers, remove conflicting devices etc. then it should be possible to restore the device on subsequent occasions. A USB device infecting virus is unlikely to actually disrupt the normal operation of an iPod, even if it manages to add viral code onto the device, as this code will target the Windows operating system. Obviously avoiding contact with malware and impacts with the envionment will be a "good thing" for both your computer and your iPod.
    B.) Software corruption should be cured with a Restore. Hardware problems will only tend to get worse. Your symptoms & history would suggest problems with the iPod's hard drive, but hardware issues on the source drive could also produce a similar effect. If the iPod gets a clean bill of health then check the laptop's drives using the Windows disk scanning tools.
    C.) I've not had any contact with Apple Geniuses but I would like to think that your experience is atypical. I've certainly heard better reports about Apple's support than say PC World.
    tt2

  • Not able toView Data in Answers

    Hi,
    I created small Repository sai.rpd but when i logon to the answers i am un able to see the data. i am getting the below error
    Odbc driver returned an error (SQLExecDirectW).
    Error Details
    Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
    State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 46036] Internal Assertion: Condition m_CountFields == static_cast<int32>(m_ColumnNameVector.size()), file .\Src\SQCSCacheStorageListStream.cpp, line 222. (HY000)
    SQL Issued: SELECT DEPARTMENTS_D.DEPARTMENT_NAME saw_0, EMPLOYEES_F.SALARY saw_1 FROM HR ORDER BY saw_0, saw_1
    The next test is to right click a physical column and chose display data to check that the physical layer here also i am unable to view data.
    I am using the Oracle 10g Expression edition.
    Can some one hep please.

    hi Ramana,
    It means u didn't mentioned the join conditions properly in physical layer
    Can you delete the existing one and import it again make the joins!
    Are you able to run the same query in database??? without any schema_name.table_name
    If yes in rpd double click on physical layer select fully qualified names
    thanks,
    saichand.v

Maybe you are looking for