Not able to save a sharepoint 2010 site as template

Getting the below error when I try to save a site as template.
Error exporting the site field named "Associated Content Type".
When I checked the SP logs,
02/28/2013 14:21:36.90  w3wp.exe (0x2AA0)                        0x1ADC SharePoint Foundation        
 General                        9k30 Monitorable SPSolutionExporter: System.ArgumentException: An entry with the same key already
exists.     at System.ThrowHelper.ThrowArgumentException(ExceptionResource resource)     at System.Collections.Generic.SortedList`2.Add(TKey key, TValue value)     at Microsoft.SharePoint.SPSolutionExporter.ExportFields(SPFieldCollection
fields, String partitionName) 66d3653b-6cd2-404a-83dc-b5f64b8cf29f
02/28/2013 14:21:36.90  w3wp.exe (0x2AA0)                        0x1ADC SharePoint Foundation        
 General                        ev0l Monitorable SPSolutionExporter: Microsoft.SharePoint.SPException: Error exporting the site
field named "Associated Content Type".     at Microsoft.SharePoint.SPSolutionExporter.ExportFields(SPFieldCollection fields, String partitionName)     at Microsoft.SharePoint.SPSolutionExporter.ExportLists()    
at Microsoft.SharePoint.SPSolutionExporter.GenerateSolutionFiles()     at Microsoft.SharePoint.SPSolutionExporter.ExportWebAsSolution() 66d3653b-6cd2-404a-83dc-b5f64b8cf29f

I tried various things yesterday but no luck Murugesan :(
To explain about where it starts,
1. Saved a SP site as template from a sharepoint web application
2. Uploaded the solution to another sp web application
3. Create a new site using that template
4. Made some changes in the newly created site
5. Tried to save that site as template
This is the point where I got the error.
After doing some searches yesterday evening, I deleted the template that was restored in point 2.
Today I tried to save that site as template it saved successfully :)
Only clue that is there in the log is
02/28/2013 14:21:36.90  w3wp.exe (0x2AA0)                        0x1ADC SharePoint Foundation        
 General                        9k30 Monitorable SPSolutionExporter: System.ArgumentException:
An entry with the same key already exists.
Thanks for ur time and patience :)
Regards,
V.Vetrivelmurugan

Similar Messages

  • I am not able to access the sharepoint:80 site using the local IP address.

     I am able to access the Central administration using the Local LAN IP address and the port number, but, I am not able to access the sharepoint:80 site using the same local IP address without the port for the central administration. I tried adding
    the local IP address in the Alternative Access Mapping to no avail. Any ideas, where I should look, is much appreciated.

    Hi，
    By my test, I set the Alternative Access Mapping for the SharePoint 80 port web application as below and it works fine:
    Thanks,
    Eric
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Eric Tao
    TechNet Community Support

  • Is the iweb that comes with your computer complete? I am not able to save to a local file or send to my web site.  Do I need to purchase the complete one?

    I have an IMAC 10.6.8
    Is the iweb that comes with your computer complete? I am not able to save to a local file or send to my web site.  Do I need to purchase the complete one?

    If you have iWeb V 3 you need to go to the Site Publishing Settings page...
    http://www.iwebformusicians.com/iWeb/Publish-Website.html
    "I may receive some form of compensation, financial or otherwise, from my recommendation or link."

  • Fatal Error: Could not find Feature AnalyticsLinks in sharepoint 2010 while migration from 2007 site using stsadm command

    Fatal Error: Could not find Feature AnalyticsLinks in sharepoint 2010 while migration from 2007 site using stsadm command

    Hi ,
    Firstly, I need to verify the followings:
    Whether you created a feature called AnalyticsLinks and activatated it at SharePoint 2007 site.
    Whether you installed the feature at SharePoint 2010 site.
    Please deactivate the feature AnalyticsLinks, then migrate SharePoint 2007 site to SharePoint 2010, compare the result.
    Also , please check whether you have installed the feature AnalyticsLinks at your SharePoint 2010 site. If not, please install and activate it, compare the result.
    Here are some similar posts for you to take a look at:
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/17b17bd3-126c-44d4-bd58-38dd613017a0/fatal-error-could-not-find-feature-reviewpublishingspd1055?forum=sharepointadminprevious
    http://mrin17.wordpress.com/2009/09/15/fatalerror-could-not-find-feature-s2siteadmin-while-importing-sites-from-different-server-at-sharepoint/
    I hope this helps.
    Thanks,
    Wendy
    Wendy Li
    TechNet Community Support

  • Unable to open Office files on SharePoint 2010 sites on Windows Server 2008 R2

    Setup: Windows SharePoint Server 2010 sp1 on Windows Server 2008 R2 (hosted on VMWare VSphere ESXi 5.1)
    Secured using Domain SSL from GlobalSign.
    Client OS: Windows 7 Professional 32bit & Windows XP SP3 32 bit
    Browsers: IE10, IE9,IE8
    Office: Office 2010, Office 2010 sp2 (both 32bit), Office 2007
    Problem Description: Only recently, users started having issues with opening Office files (Word, Excel) on SharePoint sites. When you click on an Office file e.g. Word Document, it comes up with the option to select "Ready only" or "Edit"
    and choosing either options and re-entering the login credentials results in the
    application hanging. If you leave it for a while (about 5 minutes) sometimes the file opens and other times it gives the error "Could not open https://portal.com/XXX/XXX/Document.docx". Even when it opens, it's extremely
    sluggish and can't do anything other than end it via Task Manager. Same with excel files. 
    This happens to all the users all different OS and browsers.
    On XP Pro SP3 w/ IE8, when you click on the file, the login prompt keeps popping back up repeatedly and if you click cancel, the file loads up anyway but no way of saving back onto the SharePoint site.
    IMPORTANT: One exception is when logged in as a Site Collection Administrator, it
    works like a dream bizarrely!!!! Opens, Edits and saves back fine on the SharePoint site.
    Have tried following:
    1. Repaired Office 2010 Pro; Uninstalled/Re-installed Office 2010 Pro
    2. Reset Browser, unticked automatically detect proxy settings.
    3. Emptied OfficeOfflineCache on Client
    4. Removed WebDAV from the SharePoint server
    5. Added Antivirus folder exclusion (We use SEP 11) on the SharePoint Server
    Note: PDF files opens fine for all users.
    I would immensely appreciate if anybody has got any advice/pointers/suggestions. Desperately out of ideas at the moment.
    regards,
    Compter Sez No!

    Hi,
    According to your description, When you try to open a Microsoft Office document from a SharePoint 2010 site in a client application, the document opens slowly and you are prompted to enter your credentials multiple times.
    This issue may be because of SharePoint Web Front End (WFE) server(s) has Antivirus software installed and the exceptions are not set correctly.
    I recommend to remove the antivirus software or set the correct permissions for the antivirus software to resolve the issue.
    To configure the antivirus exceptions, please follow the guidelines in the below articles:
    KB943620:
    Folders to exclude when you perform a file-level antivirus scan on a server operating system.
    KB952167:
    Certain folders may have to be excluded from antivirus scanning when you use a file-level antivirus program in SharePoint.
    KB943556:
    Recommended file and folder exclusions for Microsoft Forefront Client Security or Forefront Endpoint Protection 2010.
    Best regards.
    Thanks

  • SharePoint 2010 site (SAML 2.0 authenticated) edit the list in Datasheet View is disabled

    I am working on a SharePoint 2010 site which is SAML 2.0 authenticated. The site work fine in general. However when I try to Edit the list with
    'DataSheet View' i.e. disabled. Evenif I am not able to create any Datasheet View also.  However when I login with VPN Net Work fine.
    Thanks and Regards
    Er.Pradipta Nayak
    Visit my Blog
    Xchanging

    Hi,
    As per your given information you have installed the office 2007 on your client machine, so can you please check the
    Office
    2007 Data Connectivity Component  is installed or not if not plz. Installed and let us know.
    Krishana Kumar http://www.mosstechnet-kk.com

  • Office Web Apps 2010 on SharePoint 2010 site running in SharePoint 2013?

    We're in the process of moving a SharePoint 2010 site over to SharePoint 2013.  The SharePoint 2010 site is using classic authentication, and it's not in scope to update this to claims-based authentication.
    I'd like to continue running the site in SharePoint 2010 mode without upgrading it to 2013.  In this case, can I continue to use Office Web Apps 2010 for this SP2010 site?  I've already installed Office Web Apps 2013 on another server but just
    read that it needs claims-based authentication.

    If you want to use OWA once the site has been moved to 2013 you will need to change the web application to use Claims. OWA in 2013 requires that and will not work in classic mode.

  • Sharepoint 2013 site having NTML Crawl issue while crawling Sharepoint 2010 sites having FBA authentication

    Hi,
    We have Sharepoint 2013 search center site which is claim based with NTLM authentication set. we have Sharepoint 2010 farm also running which are FBA authenticated.
    While crawling Sharepoint 2010 sites having FBA authentication from SP 2013 search center having NTLM auth. it does not give proper result.
    Can you please help me what can be done here?
    Thanks,
    Prashant

    Hi Prashant,
    According to your description, my understanding is that the search cannot work correctly when crawling the SharePoint site which is form-based authentication.
    Per my knowledge, the crawl component requires NTLM to access content. At least one zone must be configured to use NTLM authentication. If NTLM authentication is not configured on the default zone, the crawl component can use a different
    zone that is configured to use NTLM authentication.
    However, if crawling a non-default zone of the web application, URLs of results will always be relative to the non-default zone that was crawled for queries from any zone, and this can cause unexpected or problematic behavior.
    I recommend to make sure that the default zone of the SharePoint 2010 web application to use NTLM authentication.
    More references:
    http://technet.microsoft.com/en-us/library/dn535606(v=office.15).aspx
    http://technet.microsoft.com/en-us/library/cc262350.aspx#planzone
    Best regards.
    Thanks
    Victoria Xia
    TechNet Community Support

  • Not able to save more than 2000 characters

    Databse - SQL server 2000
    I am using jdbc to save some text in sql server 2000 database. column is of type ntext.
    If text is more than 2000 character, i am getting an error.
    I tried changing the connection setting to sendstringparameterasunicode=false. After setting this property i am able to save more than 2000 characters, but i am not able to save some special characters. eg - . I am not able to save “abc” but i can save "abc". So it is not recongnizing the double quotes in the first scenario.
    Amit
    Edited by: rushtoamit on Feb 22, 2010 8:48 AM

    No idea. But it isn't a java nor jdbc (general problem.)
    Thus if you are seeing something that tells you it is too big it either comes from the driver or the database.
    So your solutions are
    1. Use a different database and driver
    2. Use a different driver
    3. Modify your code

  • How to "Capture Multiple Levels" of a SharePoint 2010 site

    Hello!  I have an end user I'm trying to support who is trying to update her SharePoint site so she can print the .pdf format.  Whenever she tries to "Get Entire Site she gets an authorization failure and it says Error:  Nothing Done.  We have migrated the site content over from the old intranet page into a SharePoint 2010 site.  However, user informed me that she needs to have the ability to print the entire site content and she had been doing this using Adobe Acrobat X Pro.  How do I correct the authorization failure message?  I'm a SharePoint administrator so please let me know what I need to do on the back end to get this to work.  Thanks! 

    I have seen the same error a number of times. I found that certain domains would not work and give me the error msg. and not allow me to capture a website into PDF format.
    http://www.wisconsindot.gov/projects/index.htm generates the 'Authorization Failure' error msg. and will not create a PDF file.
    http://www.dot.wi.gov/projects/index.htm and http://www.dot.state.wi.us/projects/index.htm both work fine and create a PDF file as intended.
    Do you have an alternative domain you can use for the URL? If so, try that and let me know if it works.
    Gregory A. Simonis | DTSD Publications Editor/DTSD Extranet Web Administrator | WisDOT SW Region - Madison, WI

  • Users are not able to save pdfs after editing - Adobe XI. They do not use the Win7 explorer preview pane.  If they completely close the Win7 explorer window, they can save - Adobe XI thinks the preview pane is open when it is not.

    Users are not able to save pdfs after editing.  Product is Adobe XI, OS is Win7 64-bit.  When saving, an error pops up that the file cannot be saved, it is in use.  If they save as a different name, it works.  Found several forums/blogs/etc that suggest the problem can be solved by closing the Window7 explorer preview pane.  They don't use the preview pane.  I figured out that if they completely close the explorer window, they can save.  But this means they have to open and close explorer for each file.

    Hi, I would like to chime in and say that this problem has not yet been resolved. It is extremely annoying when all I do is highlight a document in the file explorer and I get 5 errors (evenly spaced out about 20 seconds apart telling me that "Microsoft
    Word Cannot Start (24)". These errors persist even after windows explorer and word are closed. And I don't want to start terminating processes just to make them stop every time.
    I'm a little frustrated with this problem and the other problems I've encountered with MS Office 2013 with file corruption, crashing, 2010 compatibility issues, and the whole host of errors when trying to actually do WORK with Word.
    I do work with long, complex reports in Word because that's the best way available for myself (and my coworkers) to use. However, I sincerely regret upgrading to Office 2013 because of it. I love it, all of its features, and its interface, but I simply cannot
    use it without problems.
    Submitting an official complaint whenever the phone reps start up again in the morning.

  • I am not able to save the pdf with filled data or related to reader extension

    Hi,
    I have designed a pdf with some text field controls. But i am not able to save the document when i fill some data into the pdf.
    or whenever i save data it says that the pdf will be saved blank.
    I know that this is the reader extension issue. How to i add this reader extension feature into it.
    I know that reader extension can be
    1. cached
    2. A document can be made reader extended using adobe live cycle process.
    3. also it can be embedded while designing the pdf.
    Can any body let me know how do i incorporate reader extension feature while designing and at runtime too.
    I know we have taken reader extension license but dont know how to use this reader extension feature.
    Regards
    Sunil

    Hi Sunil,
    You indicate that you have a Reader Extensions license, did you also purchase Adobe LiveCycle Reader Extensions ES2? You would apply the license to your form using this server product.
    You can also apply reader rights using Acrobat Standard v9 (or Acrobat Professional v8), but this has license restrictions - see EULA. Also the rights that are enabled using this route will not be as many when compared to LC Reader Extensions ES2.
    I have a summary here:
    http://assurehsc.ie/blog/index.php/2010/05/using-livecycle-forms-in-acrobat-and-reader/
    Also have a look at the Adobe page:
    http://www.adobe.com/products/livecycle/readerextensions/
    Maybe talk to the Adobe sales in your region.
    Good luck,
    Niall

  • ScriptLink tag not working for application page sharepoint 2010

    <ScriptLink> tag not working for application page sharepoint 2010 for including javascript in application page, it appends either 1033 or _layout to path specified for javascript.But javascripts are located in custom document library on site and not
    in _layouts folder.
    Please help and explain in details as I tried lot on this.

    Hi,
    Use the following line of code
    <SharePoint:Scriptlink runat="server" Name="~sitecollection/Style Library/[YOUR SITE]/js/functions.js" Language="javascript" />
    Thanks,
    Vivek
    Please vote or mark your question answered, if my reply helps you

  • Receiving an error when checking out Visio 2013 file from a Sharepoint 2010 site.

    Receiving the following error when attempting to checkout a Visio 2013 file from a SharePoint 2010 site: "Sorry, we couldn't open 'http://sharepoint/folder/folder/folder/folder/file name".  If you need to know the length of any of the folder
    or file name, please let me know. I have checked answers to other questions but none seem to apply or the person responded that the answer did not work.

    Seems that your Microsoft Office Document cache is corrupted.  please try deleting cache folder :
    Clear the Microsoft Office Document Cache by opening the Upload Center->Settings->Delete cached files.
    Clear the Office File Cache at  C:\Users\<username>\AppData\Local\Microsoft\Office\14.0\OfficeFileCache.
    Clear the Office File Cache at  C:\Users\<username>\AppData\Local\Microsoft\Office\15.0\OfficeFileCache.
    Thanks
    Ganesh Jat [My Blog |
    LinkedIn | Twitter ]
    Please click 'Mark As Answer' if a post solves your problem or 'Vote As Helpful' if it was useful.

  • Getting access denied when trying to loging to sharepoint 2010 site collection.

    only Site Collection Administrators  are able to logging in to the site,other than that
    If i give any View or read or contribute permission to any user then he is not able to logging in to the site getting Access Denied ERROR.
    Below is the error generated in the LOG folder & attached here with screen shot.
    Request (GET:http://sharepoint-app:2525/_layouts/accessdenied.aspx?closeConnection=01
    vijay kumar designer 2010

    Tanq it solved my problem Fadi
    Abdulwahab
    vijay kumar designer 2010

Maybe you are looking for