Not able to see added field in datasource after transporting in quality

Hi,
I enhanced a datasource in dev.now i transported it to quality.but in quality m not able to view added field.
let me know where its going wrong.
thanks in adv.
bhavna

Replicate your datasources...and activate the transfer structure...now go to the transfer rules and bring the field for mapping.
Hope it will help.
Assign points if useful.
Regards
Gajendra

Similar Messages

Not able to see Metadata fields when adding the fields to the rule in UCM

Not able to see Metadata fields when adding the fields to the rule even after creating them in information fields of configuration manager.It is happening for few fields only.We are using 10.1.3 version of UCM.Kindly provide a solution if any.

Dhilipan,
I am trying to setup AES at the current Customer.
You are right on LR_JP to be linked to customs code list instead of ACE and I do achieve that if I were to maintain the Custom code list by maintaining the assignment for EAR in a separate test.
I was infact trying to follow the link: http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/30c7015e-c191-2d10-71b9-95907dc8edd1?overridelayout=t…
On this document, if you look at page# 14 thru 17, it has the steps I described in my original note with customs code still appearing in the drop down for 'EXCPT' for EAR.
Nevertheless, I wanted to default Type = C50 when the license type for the line on the Customs declaration is 'EXCPT' but if you see the very last screen-shot below, even though the license type configuration has default value as 'C50' it did not get pulled into the line item Documents tab when I tried to pick the category as 'CUII'.
Let me know your thoughts on defaulting the data into Customs declaration for AES filing.
What I want to achieve is the following:
When License type is 'EXCPT', system should default the type as 'C50'
Should put the License type 'EXCPT' into the number field
Should put the actual License# 'ENC' into the Supplement field
Should put the ECCN # '5A002' into the Details field
Thanks,
Prashant.

SQVI - Not able to see all fields in a table.

Hello all,
I was not able to add few fields in a table into my report as I am not able to see those table fields in SQVI. For example T508A-RTEXT. Please let me know.

Hi,
As Tamas suggested, field RTEXT is actually a filed in text table T508S. You would have to join table T508S in your query.
For more info on text-tables, please look the below link:
[Text Tables|http://help.sap.com/saphelp_smehp1/helpdata/en/cf/21ea9e446011d189700000e8322d00/content.htm]
Thanks.
Ravi

Not able to see my Field in RSA3!

Hi Gurus,
Iam not finding my enhanced field in RSA3, showing 1000 records, but not my field, i already unhided field in rsa6(change datasource)!!
wat is the solution! pls help me!!
Regards,
Jay

Hi,
if you are diaplying the records from rsa3 and you couldnt find your field then please select your field the Layout set up (you can set this from one of the header tabe at the top of the screen ).
If you are unable to find this field in Debugging mode of rsa3 itself .Please check the table ROOSFIELD under your datasource for the avaialbility of your field.if you are unable to find you field here .then I would suggest to write a small abap program to insert this field into your table.
TABLES: ROOSFIELD,ROOSOURCE.
CONSTANTS: C_OLTPSOURCE_ORIG LIKE ROOSOURCE-OLTPSOURCE
                                      VALUE 'Your Data Source'.
DATA     : ZROOSFIELD         LIKE ROOSFIELD .
SELECT SINGLE * from ROOSFIELD into ZROOSFIELD
             where OLTPSOURCE = 'Your Data Source'
             AND   FIELD      = 'any sap standard field already existing in the extract structure'.
ZROOSFIELD-field = 'Z field you want to insert'.
INSERT ROOSFIELD    FROM ZROOSFIELD.
Message was edited by: sukumar U

Not able to see menu bar and dock after maximizing.

Prior to installing Yosemite, maximizing a window left the menu bar and dock visible; with Yosemite they are no longer visible. How do I reset this?

Moving the mouse pointer to top or bottom of screen (assuming menu at top and dock at bottom), should display them.
Or, Control/Command/F combination.

NOT ABLE TO SEE SQL EXPRESSION FIELDS IN CR2008

Hi,
I am not able to see the SQL EXPRESSION FIELDS in the FIELD EXPLORER of CR 2008.Can
you please help me
BABASHARI

Hi,
I would suggest you open the question in the Crystal Reports forum.
Ingo

How to view .shtml files locally? I have added "Open in Browser" but still not able to see the local .shtml file.

I have added Open in browser add ons in Firefox browser, but still not able to see the .shtml files on local machine.
Can any one please tell me how to view .shtml files in Firefox?

SHTML files are regular HTML files that make use of Server-Side Includes. In some server configurations, the special file extension is required to instruct the server to parse the file for SSI code.
If Firefox doesn't recognize the file type, it is likely the MIME type is incorrect.
Try this Addons
*https://addons.mozilla.org/en-US/firefox/addon/open-in-browser/

Not able to see the records in master data

Hi friends
My requirement needs the data to be loaded from a RDM table.I created a data source in the R/3 and by using the extracto checker i am able to see the data.I created the info packages one for Attr and other Txt,replicated the datasource and loaded the data.I am able to see the data in the PSA and when i go into monitor in the infopackage it says the data has been loaded and it shows no errors.But I am not able to see this data in the master data info object.Can anyone please help me out???
Mouli

Hi
Check out your infopackage setting: if its upto PSA or to MD table also
Open Master data table in SE11 and check the OBJVERS field wether the MD is activated or not!
Regards
GSK

Not able to view the fields ....made through enhancement 0002--

Dear Freinds,
            I have made enhancment for infotype's 0002 and 0023 . However when i am looking through PA30 for a personnel number iam not able to view the fields created in 0002 infotype , however iam able to view the fields created in infotype 0023 . Is there is a any setting's i have to make so that i can view these fields created in infotype 0002 also ??
please let me know .
regards
vamsi.

Dear Deepak
            yes this is enhancement to 0002 and 0023 ... i have to add one field for the
0002 ..........as ihave to add chinese name for my requirement ..................
and i have done some new fields for 0023. if can give me your personnel id i can
send the screen shots ........
i want to tell one thing.........   i have created for 0002 by adding new the new field (chinese name) .. it created a z program.ZP000200(Module pool) with the below
includes
INCLUDE ZP000210.
INCLUDE MPPDAT00.
INCLUDE FP50PPSB.
INCLUDE MPPERS00.
INCLUDE ZP000220.
INCLUDE ZP000230.
INCLUDE ZP000240.
and when i went to the screen 0200 i have found the field which i have added
P0002-ZZCHNAM type char 20 . and i executed from here itself (by clicking F8).
and iam able to see the field which i have added
under additional fields...........but the same if i go in PA30 and create .........for an employee (molga = 27)... i dont find the field which i created...... i have done this
change for the country 27 only.
regards
vamsi
regards

Not able to see data in the qualifier table of the main tbl , Data Manager

Hi,
I have an issue of not able to see the data of two qualified table after populating them.
It is in mdm-5.5 ps4.
When populating data first time ,it shows up in those two table slots in the right side of the Data Manager.
However subsequently it does not show up in those slots , only by right click on the table and selecting "View/edit", the window pops up where those data shows up.
However unlike other qualified tables the data does not showup automatically for these two tables.
Appreciate any suggestion or feedback on this.
regards,
-reo

You may have checked the Filter Check Box next to the Qualified Lookup cell in Data Manager, when the current table is the Main Table.
You use the Filter Checkbox to limit the qualified table records by the current search selections.
Secondly, you have see if there are any Qualified Links to the main table record you are viewing.
If not, create the Qualified links in Data manager, for the main table record and the Qualified Table Record.
Once this is done, you will see the Display fields of the Qualified table for which the links exists for the given main table record.
Message was edited by:
Adhappan Thiagarajan

Not able to see data in 0FIGL_V30 & 0FIGL_V31

Hi,
I've activated / installed standard business content for EpH3 i.e Mutltiprovider 0FIGL_M30 and entire data flow which includes reports and virtual providers 0FIGL_V30 & 0FIGL_V31.
I'm able to see data in cubes where above virtual providers read data from. here is the link from help.sap.com
http://help.sap.com/erp2005_ehp_03/helpdata/EN/6b/fdc62d9e0b444cb14b7f424d9f9cb7/frameset.htm
Issue is i'm not able to see data in Virtual providers 0FIGL_V30 & 0FIGL_V31 and hence in reports.
Can anyone advice please. thanks
SD

Hi All,
Yes I've checked data in underlying cubes.
Mulitprovider is fine.
I've added Master Data for both 0GL_ACCTP and 0ACCESSTP
RFC connection is fine.
No DTP & Transformation since this is Virtual Provider based on Functional Module.
However when I debug FM for 0FIGL_V30 & 0FIGL_V31 - I see no data and thought there might be master data issue b/w 0GL_ACCOUNT & 0GLACCEXT but MD is fine.
It just not pulling data.
Is there some setting I'm missing?
FM's used for Virtual Providers are
0FIGL_V30 - RS_BCT_FIGL_SREP_DATA_GET_V30
0FIGL_V31 - RS_BCT_FIGL_SREP_DATA_GET_V31
SD

Not able to see Purchase Order No in FBL1N Report

Dear All,
I am not able to see Purchase Order Number in FBL1N report. I have tried in change layout by selecting the purchase document but system is not displaying.
Kindly help me on this.
Regards,
Yadayya

Dear Yadayya,
in reference to your query please review the SAP note
152335 Field EBELN in line layout variant for cust./vendor
Please note that field BSEG-EBELN is not possible for being shown
with a value in FBL1N and FBL5N as explained in the note above.
Since Release 3.0, several purchase orders can be offset in one invoice.
As a result, different purchasing document numbers (BSEG-EBELN) can be
contained in the different G/L account line items.
As a result, it is no longer possible to enter a unique purchasing
document number in the customer/vendor line item.Field BSEG-EBELN is not
filled in the vendor line item and therefore cannot be displayed in the
line item display for customers/vendors.
Hope this information helps to clarify the standard system behaviour.
Mauri

I could not able to see Imported Business Package

Hi
I am using Standard Business Package for SAP CRM4.0 60.2.3; it is stored in PCD -> Migrated Content
I customized the Business Package and stored the content in my folder and transported the Business Package to Local (on Desktop) and Server (in server: C:\usr\sap\J2E\SYS\global\pcd\Export).
I did not deleted the Standard BP from PCD/Migrated Content
After importing the Customized Business Package from local system i could not able to see the Business Package in PCD.
I could not able to see the Customized BP in PCD.. , Whether that Standard BP should be deleted before Importing
What is the Default location it stores after importing?
Plz help me to solve this issue its very urgent.
Regards

Hi Michael
For Example In CRM BP there are set of Roles in that i took only Lead Manager Role and Stored that in my folder xyz as Deltalink and i also copied dependent object pertaining to that Role as Delta link.
In Transport Package i added all the dependent object and aswell the Role of Lead Management to that Package.
Before Exporting the Transport Package there is a option called (Include all objects on which the exported objects depend) i checked this option and Id of dependent objects i mensioned as ex: com.xyz
After doing this i transported my BP

Could not able to see my customized BP after Importing

Hi
I am using Standard Business Package for SAP CRM4.0 60.2.3; it is stored in PCD -> Migrated Content
I customized the Business Package and stored the content in my folder and transported the Business Package to Local (on Desktop) and Server (in server: C:\usr\sap\J2E\SYS\global\pcd\Export).
I did not deleted the Standard BP from PCD/Migrated Content
After importing the Customized Business Package from local system i could not able to see the Business Package in PCD.
I could not able to see the Customized BP in PCD.. , Whether that Standard BP should be deleted before Importing
What is the Default location it stores after importing?
Plz help me to solve this issue its very urgent.
Regards

Hi Sanjay,
There is no need to delete the Standard BP from PCD/Migrated Content.
After customizing the business package and storing the content in your own folder, you have to add all objects to new transport package(by right clicking on main folder)then export it and download the epa to your local system.
After importing the epa in some other portal, BP will sit under same path you have specified while creating business package(PCD).In sense, it will create the same PCD structure when you import epa in some other portal.
You might have done some mistake while creating transport package and exporting it to your local system. You might not have added all object to new transport package.
Hope this is of some help. Do write back in case you need further clarification
Cheers
Ruchi.

Not able to see the PSA

Dear Experts,
I have enhanced the extract structure of 2lis_13_vdkon in R/3 with 5 fields which are exist in transfer structure.
I have replicated the data source in BI but unfortunately i have not deleted the data in the PSA.
After replication when i try to activate the data source the system is giving Dump and im not able to see the PSA also.
Please help me out.
When i manage on the data source to c PSA, its giving error like this
Invalid DataStore object name 2LIS_13_VDKON_BB: Reason: No valid entry in table RSTS
The Dump when activating the data source is :
Runtime Errors         SAPSQL_ARRAY_INSERT_DUPREC
Exception              CX_SY_OPEN_SQL_DB
Date and Time          03.06.2009 09:46:55
How to correct the error
     Use an ABAP/4 Open SQL array insert only if you are sure that none of
     the records passed already exists in the database.
     If the error occures in a non-modified SAP program, you may be able to
     find an interim solution in an SAP Note.
     If you have access to SAP Notes, carry out a search with the following
     keywords:
     "SAPSQL_ARRAY_INSERT_DUPREC" "CX_SY_OPEN_SQL_DB"
     "CL_RSAR_PSA===================CP" or "CL_RSAR_PSA===================CM006"
     "_UPDATE_DIRECTORY_TABLES"
     If you cannot solve the problem yourself and want to send an error
     notification to SAP, include the following information:
     1. The description of the current problem (short dump)
        To save the description, choose "System->List->Save->Local File
     (Unconverted)".
     2. Corresponding system log
        Display the system log by calling transaction SM21.
        Restrict the time interval to 10 minutes before and five minutes
     after the short dump. Then choose "System->List->Save->Local File
     (Unconverted)".
     3. If the problem occurs in a problem of your own or a modified SAP
     program: The source code of the program
Regards
venu

Hi Venu,
The issue I think is the PSA was not deleted cleanly. If you try and activate the PSA you will get the dump again.
..Probably if you go through the ABAP dump you will notice it is pointing to the following code;-
   75 * Put the fields of PSA to database without check, otherwise error by
   76 * activation of table
   77
   78   IF p_psa_exists EQ rs_c_false OR
   79      i_new_version     EQ rs_c_true.
>>>>>     INSERT rstsodsfield FROM TABLE l_t_odsfield.
   81   ELSE.
   82     DELETE FROM rstsodsfield
   83       WHERE odsname = l_s_odsfield-odsname
   84       AND version = l_s_odsfield-version.
   85     MODIFY rstsodsfield FROM TABLE l_t_odsfield.
Put a breakpoint in the code in line 78. and activate the DS..the program should stop in 78...change the value of variable rc_c_false so that line 82 gets executed. This will clean up the PSA entries in table rstsodsfield. Now activate the DS and delete the PSA entries in the PSA table.
We faced the same issue and resolved it this way.
Thanks
-Saif

Not able to see added field in datasource after transporting in quality

Similar Messages

Maybe you are looking for