Not able to see all the records thru RSA3.

Hello All,
I am checking 0VALUATION_TEXT extractor on R/3 using RSA3 Tcode.
It is showing only 3 records.
When I am loading this Text Master data through InfoPackage, the records were loaded from R/3 to PSA itself is 6.
Why I am not able to see all the records in RSA3.
Kindly Help me out in this.
Thanks,
Geetha

Hi Geetha,
Check the data, It seems loded data was 3 records for 2 languages.
In RSA3 it is showing 3 records for EN language.
Assign points if it helps...
Regards,
ARK

Similar Messages

Not able to see all the records in SM30

Hi All,
I have created a Z-table. In that records are stored based on the dates.
Suppose :
The fields and their values in the table are as below,
Field1          Field2                 Field3
A             22/02/2008      31/12/9999
A             12/01/2006      21/02/2008
B             10/11/2007      31/12/9999
B             27/05/2006      09/11/2007
But in if we go in SM30 transaction, it is showing only recent records i.e.as below,
Field1          Field2                 Field3
A             22/02/2008      31/12/9999
B             10/11/2007      31/12/9999
Please tell me how can I get the full contents of the table in SM30.

Hi,
Looks like there is a date restriction for showing records where the ENDDA date is not less than SY-DATUM.
When entering SM30, select the option (radiobutton) "with restrictions"
There might be some default restriction maintained.. Check that and remove it if present.
Cheers.

Users not able to see all the default reports in FDM under analysis

All,
Users in FDM are not able to see all the default reports which will be available under Analysis. I have checked the MenuNavigation and MenuNavigationItems under object maintainence in FDM which have "ALL" as the provisioning level. I am not sure where the issue is as the users still not able to see the reports. Please advise if there is something that can be done in workbench.
Regards

You can set security on Report folders in workbench. You would go to the report tab in workbench, and right click on a Folder (Cannot do it on the individual report, it has to be on the folder), and you can assign security levels to the report folder. There are some in here that default to the admin level but you can override it.
Regards
JTF

Not able to see all the SAP tables from CR 2008

Hi All,
1)I am not able to see all the SAP database tables(DEV server) from Database expert menu in CR 2008. Only tables those start with alphabet letters upto A & B are visible. I checked the database connection>right click>options> found no filters as well.
We are using the CR 2008 trial version with SAP ECC.
2) When i am trying with Production Server of SAP ECC, I am not able to logon to the SAP from CR 2008. It is giving error message
as : LOGON FAILED : User USER1 has no RFC AUTHORIZATION for function group SYST
Please help me to resolve these. Thanks in advance.

Thank you very much ingo.
You helped me a lot.
One more question, when I am trying for SAP database connections say for ex: 10.57.410.70, again and again some times the connection is getting saved in my connections with as new versions/variants like
10.57.410.70_1 or so. How to overcome this.
Thanks in advance ingo
Badari

Not able to see all the application components in BI

Hello Friends,
Basically, we should be able to see all the application components(when you select 'datasources' under 'modeling' in RSA1) in bi which contain different datasources in them, example:
App components
+Financial Accounting
+Controlling
+Sales & Distri
i am not able to view any of the above App components in BI.
Could you pls help me out ...
Thanks,
Srini

Hi,
These data sources not activated in the source system in SAP and you need to go to t-code RSA5 and activate them manually after selecting them.
I think its "Activate data source" option.
Create a TR for this if asked.
once activate you need to replaicate them in BW and then you can see if they are coming or not.
Also it is possible that you are looking at the wrong source system.
in the data source option in RSA1 look for SAP option and the right client and then see if these data sources are appearing or not.
Thanks
Ajeet

ARE YOU AWARE, THAT PROBABLY GOOGLE MAIL, GMAIL, HAS INTERFERED IN LIGHTBEAM'S PAGE SIZE ? I AM NOT ABLE TO SEE ALL THE GRAPH SIGN'S DOWN UNDER. CAN YOU RESET?

Are you aware that probably Google mail, has interfered in Lightbeam's page size ?
I am no longer able to see all the Graph Sign's in the centre of the page because they are now in majority, so almost completely, vertical down the horizontal line. ( although, Reset Zoom level is adjusted to 100% )
Can you reset the page size for me, and also the Graph Logo's back to the centre of the page again. Please.
At the same time:
My touch screen now, from my laptop, is extremely more Sensitive for Static load of my hands, resulting in trouble during the writing process, ... because, now the writing cursor, jumps away unexpected if my hand comes near to the Touch Screen.
It triggers my temper, ... Please, can You help me out here ???
Small history:
After I used the possibilities of blocking several Direct and In-directs followers of my personal Internet activities, it is Google Mail, who is in War with me now, and inside Gmail I am no longer able to sign out.
Because Gmail lay out is partly out of service.
Thank You all for your cooperation.
Jan Mink

It is possible to reset the zoom size.Have you tried [[Font size and zoom - increase the size of web pages|Firefox's zoom feature]]? This will help increase the size of web pages.
* To make things bigger, press '''Ctrl''' and '''&#43''' at the same time.
* To make things smaller, press '''Ctrl''' and '''-''' at the same time.
* To reset the size back to normal, press '''Ctrl''' and '''0''' at the same time.
You can also use the [https://addons.mozilla.org/en-US/firefox/addon/2592/ NoSquint]. add-on to change the default zoom level for all websites at once. After setting your global zoom level, you can still fine-tune the zoom on individual sites.
'''Using NoSquint:'''
#After installing NoSquint, make sure you have the Add-on Bar displayed:
#*Right-click the new tab button ("+") or a blank area of the tab bar to the right of it and choose Add-on Bar from the shortcut menu.
#Click the % on the Add-on Bar to call up site preferences, then click the Global Settings button, then the Zooming tab.
#*You can experiment with sizes larger than 125%, but it's not recommended that you go higher than 150% unless you have a large high-resolution monitor.
If there are particular sites that still present a problem, feel free to post their URLs.
Please let us know if this helped you!
Thank you.

Not able to see all the subject areas with BI Author and BI Consumer roes

Hi All,
Recently we have upgraded to OBIEE 11G and we have created new users and assigned groups in the new 11G.
Generally users sholud be able to see all the dashboards and subject areas with the default BI Author and BI Consumer roles.
But in our 11G system users cannot see all the subject areas with the above groups, only if we give the BI Administrator role the they can see all the subject areas and dashboards.
We cannot give BI Administrator role to all the users....Please advise.
Thanks
Praveen.

Hi,
Check the application roles of BI Author and BI Consumer, they must be having BI Author and Consumer Groups. Check the privileges for Users and Application roles in Catalog manager for Dashboards and Check the Permissions for Users and Application in RPD for subject areas. Make necessary changes, restart BI server and Presentation services. Now users should be able to see dashboards and subject areas,
If it helped mark Helpful/Correct
Regards,
OBD

Not able to see all the subject areas with BI Author and BI Consumer roles

Hi All,
Recently we have upgraded to OBIEE 11G and we have created new users and assigned groups in the new 11G.
Generally users sholud be able to see all the dashboards and subject areas with the default BI Author and BI Consumer roles.
But in our 11G system users cannot see all the subject areas with the above groups, only if we give the BI Administrator role the they can see all the subject areas and dashboards.
We cannot give BI Administrator role to all the users....Please advise.
Thanks
Praveen.

Hi,
Check the application roles of BI Author and BI Consumer, they must be having BI Author and Consumer Groups. Check the privileges for Users and Application roles in Catalog manager for Dashboards and Check the Permissions for Users and Application in RPD for subject areas. Make necessary changes, restart BI server and Presentation services. Now users should be able to see dashboards and subject areas,
If it helped mark Helpful/Correct
Regards,
OBD

I'm not able to see all the tabs words on itunes window. I think I uninstall the font on my system. How I can know wich fonts Itunes uses for install it?

I think I uninstall the font on my system. How I can know wich fonts Itunes uses for install it?
I'm using Win Vista 64b - but I try already to install all my fot library but nothing happen,, still not able to see some menu's from lists, tabs titles, etc.
I search through itune's web site and not sign of info about how can I fix this problem...
help!

It has something to do with Segoe fonts in your system.
Refer this link for solution
iTunes 10.1 Missing Text

Not able to see all the users in AL08.

Hello all,
We have SAP ECC 6.0 installed on SOLARIS 10,database as oracle 9.2.0.6
We have installed and configure solaris cluster 3.2 for our production environment , one node installed with database ( db+ci ) and other node installed with application server.
In Database server t-code AL08 only shows its user only, while in application server it works fine, Al08 shows users of both the servers.
same problem with SM51, From application server we are able access database server but from database server we are not able to access application server. Access means we can check work process,user etc.. even though in SM51 both the servers active.
Chandresh Pranami.

Hi Chandresh,
see
Note 412014 - AL08 does not show all instances
Note 648255 - Incorrect number of active users with AL08
SurendraJain
Edited by: Surendrajain2003 on Jul 31, 2009 12:43 PM
Edited by: Surendrajain2003 on Jul 31, 2009 12:43 PM

Table Maintance - Not able to see all the entrie of table

Hi All,
I have created a Z table where I have mentioned 3 key fields.
MANDT      CLNT    3
ANSVH      CHAR   2
ENDDA      DATS    8
Now when I create the multiple entry using sm30 with the key field ANSVH same and different date i amnot able to see the entry in the sm30 but in table it exists.
e.g.
in table i have 2 entrries
100   A     30.03.2009
100   A     31.03.2009
but in sm 30 i am able to see only one entry
A     30.03.2009
I have generated the table Maintainnance several times but no success.
pls help.
Regards,
Umesh Chaudhari.

Hi Siddharth Chordia,
Thanks for your all effort.
but ti have checked the points mentioned by you here.
1) you might have forgotten to check key field for date field,
              All the three fields mentioned are key fields.
MANDT     MANDT     CLNT     3     0     Client                                    KEY Initial
ANSVH     ANSVH     CHAR     2     0     Work Contract                       KEY Initial
ENDDA     ENDDA     DATS     8     0     End Date                              KEY Initial
BEGDA     BEGDA     DATS     8     0     Start Date
BETRG     BETRG     CURR     9     2     Amount
PERCT     PERCT     DEC     5     2     Percentage
ZPDPF     ZPDPF     DEC     7     3     DPF Department Production Factor
2) may be the table is inactive, if so activate the table
       Table is active.
3) may be you would have made the date field as a key field after you had created the table, in this case you will have to click on utilities menu -> database utility, then click on activate and adjust database,
Even though I created all the key fields in first place it self, I tried data base utility also.
4) once you give the entries you might have forgotten to save the entries.
Entries in the table
100   A     31.03.2009 01.01.2009     5,000.00   0.12     0.123
100   A     30.06.2009 01.01.2009     5,000.00   0.12     0.230
Entries in the SM30
A     30.06.2009     01.01.2009     5,000.00     0.12     0.230
I even tried to create the new table. but the same result.
Regards,
Umesh Chaudhari

Not able to copy all the record from the table?

Hi All,
I have a table Table_1 with 5 crores of data. I have created the same table structure Table_2 like Table_1 and trying to insert the entire data from Table_1 to Table_2 by use of the below code:
CREATE OR REPLACE PROCEDURE insert_prc (limit_in IN PLS_INTEGER)
IS
    cursor cur_insert
    IS
    SELECT *
    FROM    Table_1;
    type tabtype_insert IS TABLE OF cur_insert%ROWTYPE INDEX BY PLS_INTEGER;
    v_tabtype_insert   tabtype_insert;
    v_limit_rows    NUMBER := 1000;
    v_start    PLS_INTEGER;
    v_end      PLS_INTEGER;
    v_update_count NUMBER;
    v_bulk_errors   NUMBER;
begin
    DBMS_SESSION.free_unused_user_memory;
    show_pga_memory (limit_in || ' - BEFORE');
    v_start := DBMS_UTILITY.get_cpu_time;
    BEGIN
        open cur_insert;
        LOOP
            FETCH cur_insert BULK COLLECT INTO v_tabtype_insert LIMIT v_limit_rows;
            FORALL i IN 1..v_tabtype_insert.COUNT SAVE EXCEPTIONS
            INSERT INTO Table_2
            VALUES v_tabtype_insert(i);
            EXIT WHEN v_tabtype_insert.COUNT < v_limit_rows;
            COMMIT;
        END LOOP;
        CLOSE cur_insert;
    EXCEPTION
    WHEN OTHERS
    THEN
        v_update_count := 0;
        v_bulk_errors := SQL%BULK_EXCEPTIONS.COUNT;
        dbms_output.put_line('Number of INSERT statements that failed : ' ||v_bulk_errors);
        dbms_output.put_line('*******************************************************************************************************************');
        /*FOR i IN 1..v_bulk_errors
        LOOP
            dbms_output.put_line('An Error ' || i || ' was occured '|| SQL%BULK_EXCEPTIONS(i).ERROR_INDEX ||
                                ' during update of Actuator Model: '|| v_tabtype_mtl_items(SQL%BULK_EXCEPTIONS(i).ERROR_INDEX) ||
                                ' . Oracle error : '|| SQLERRM(-SQL%BULK_EXCEPTIONS(i).ERROR_CODE));
        END LOOP;   */
        dbms_output.put_line('*******************************************************************************************************************');
    END;
      v_end := DBMS_UTILITY.get_cpu_time;
      DBMS_OUTPUT.put_line (   'Elapsed CPU time for limit of '
                            || limit_in
                            || ' = '
                            || TO_CHAR (v_end - v_start)/100
      show_pga_memory (limit_in || ' - AFTER');
end insert_prc;
CREATE OR REPLACE PROCEDURE APPS.show_pga_memory (
   context_in   IN   VARCHAR2 DEFAULT NULL
SELECT privileges required on:
   SYS.v_$session
   SYS.v_$sesstat
   SYS.v_$statname
Here are the statements you should run:
GRANT SELECT ON SYS.v_$session TO schema;
GRANT SELECT ON SYS.v_$sesstat TO schema;
GRANT SELECT ON SYS.v_$statname TO schema;
IS
   l_memory   NUMBER;
BEGIN
   SELECT st.VALUE
     INTO l_memory
     FROM SYS.v_$session se, SYS.v_$sesstat st, SYS.v_$statname nm
    WHERE se.audsid = USERENV ('SESSIONID')
      AND st.statistic# = nm.statistic#
      AND se.SID = st.SID
      AND nm.NAME = 'session pga memory';
   dbms_output.put_line(CASE
                               WHEN context_in IS NULL
                                  THEN NULL
                               ELSE context_in || ' - '
                            END
                         || 'PGA memory used in session = '
                         || TO_CHAR (l_memory)
END show_pga_memory;
/From the above procedure i am able to insert only some 5000000 data. Remaining 4 crores data is not inserted. But the program says it is completed sucessfully.
Note: Table_2 is the partitioned table and Table_1 is non partitioned table.
Can anyone please what is the problem on above code?
Thanks

user212310 wrote:
-- Using BULK COLLECTS and FORALL's will consume more resources.Ya i will agree that. That's what i am using LIMIT clause passing value as 1000. It means PL/SQL will reuse the same 1000 elements in the collection each time the data is fetched and thus also reuse the same memory. Even if my table grows in size, the PGA consumption will remain stable.Limit or not, your process will consume more resources (and take longer) than the one i showed you. AND it's many many many more lines of code (harder to maintain, etc...).
user212310 wrote:
-- If you don't have a reason (aside from misguided understandings as to which is more performant) to use BULK COLLECTS and FORALL's then you should go with the direct INSERT INTO SELECT * method.The reason i am using BULK COLLECT is to reduce the execution time of the procedure.
Please let me know if i misunderstood something.
ThanksYes, you have.
Please read this
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:760210800346068768

Not able to export all the rows into excel

Hi All,
I'm not able to export all the records in discoverer report to excel sheet.
There are actually 27000 records in discoverer report, when i export them to excel sheet i can see only 16000 records.
I'm using discoverer plus.
Any suggestions...please share with me.
Thanks in advance,

Hi,
Do you have parameters on the worksheet? if so then are you selecting same as when you ran it?
What version are you using ? Plus? Viewer? Desktop?
You can export the worksheet into CSV instead of XLS and see what you get.
Also check other formats to see if this missing lines happen in all export methods or just the XLS.

FBL3N Report -not able to get all the transaction code details

Hello,
when FBL3N report ran for one the expenses account (time paid off - project charges account) , only few line items are displaying the transaction code like CJ88 and CJ8G.
can you please tell me why all the line items are not showing the transactions codes and is there any know situation when the T- codes are not displayed.
What I need to do, to get all the T- codes in the report ?
I really appreciate your help.
Regards
Radha

I know it is a line item report and I was expecting to see the transaction code details in the report for every line item. But in I'm not able to see all T- codes for all the line items
Thanks
Radha

ODBC connection not able to see all schemas

Hi everyone,
We have noticed an unusual problem that just recently started. In our database, I have created a read-only user - only has the ability to connect to the database, and SELECT ANY TABLE. Then we have some applications (Crystal Reports and Lotus Notes Agents) that use this user to query data. The applications use an ODBC connection, and when we initially set this up, everything worked beautifully.
However, suddenly we have noticed that the ODBC connection is not able to see all of the schemas in the database. We have tested and confirmed this - using either 9.02 ODBC or 10.01, this happens with both of them. I created a couple new ODBC connections, one for each version, then I try to create a new Crystal Report, using this ODBC connection - when I connect using the read-only user, it connects just fine, but when it shows me all of the schemas available, I am only seeing about half of them (and of course not seeing the one that I really need to see).
However, when I use Microsoft Access, and try to import some External Data, and I use the same ODBC connections, then I AM seeing all of the schemas.
Has anyone ever seen anything like this? Any ideas on what I can do to troubleshoot?
Thanks,
Brad

I'm trying to get this issue figured out. Can you
tell me what you mean when you ask me to log in
directly as the same user using ODBC and query
ALL_TABLES - how would I do that?Using whatever Oracle database account you use in Crystal, log in to the database using SQL*Plus (or your favorite GUI like SQL Developer) and run a query like
SELECT owner, table_name
FROM all_tablesDoes that query show all the tables you expect, or are you missing some?
Also, you mention a parameter in the ODBC API that
controls which schemas are returned - is there any
way to see that value?An ODBC trace might show the value, I don't recall if the actual value is written out in the trace. Different front-end tools often have a place that allows you to filter out certain schemas, which is generally done by passing in a parameter to this ODBC API call. I don't know enough about your tools, though, to know where this might be.
Are there any other ODBC drivers I could try?There are plenty of third party ODBC drivers out there, but I would tend to be suprised if the ODBC driver was at fault here. You could also try patching the ODBC driver and/or Oracle client to the most recent patchsets.
Justin

Not able to see all the records thru RSA3.

Similar Messages

Maybe you are looking for