Not able to see data in Hyperion Planning data forms.

Hi ,
I created Hyperion planning EPMA application and loaded data in to it. But I am unable to see data in my data forms? Please give me solution for this?

Hi,
Here there are 2 things, once your epma heirarchy is ready did you deploy it against your planning App ? and incase if you haven't deployed your planning application, then old outline would be existing in Essbase and if you load data for old outline it will still take into but when you deploy the database gets restructured and older data gets restructured/removed.
Before going onto that level first check if your load data to essbase completed successfully. and did you load data for the combinations on dataform ? ? Try manually inputting a number through data form and submit and do a refresh to see if value comes up. ? Check your data form settings , if you have enables suppress missing rows/blocks.
Thanks
Amith

Similar Messages

ST03N, i am not able to see today n previous day data

Hii All
In my ST03N, i am not able to see today n last day data, it shows me data upto last two day before data. plz tell me abt where i can check the retention period.
System Details:
SAP: ECC 6.0
DATA BASE: ORACLE 10G
OS: AIX5.3
SAP KERNEL:179
SAP_ABA: SAPKA70015
SAP_BASIS:SAPKB70015
ST-PI:2008_1_700
PI_BASIS:SAPKIPYJ7F
Already jobs:
SAP_COLLECTOR_FOR_PERFMONITOR
SAP_APPLICATION_STAT_COLLECTOR
SAP_CCMS_MAPPING_SCHEDULER
SAP_COLLECTOR_FOR_JOBSTATISTIC
and saposcol running fine.
Thanks
Amit Srivastava
Basis

Hi
You can refere this [Link|No system load data available; may help you
Regards
Uday

Not able to see the history period and data

Hello
I have 2 time planning bucket periods - history of 24 months and future 14 months.
have assigned both in the data view.
i have loaded the data from infocube to planning area and i got the successful message.
during the transfer i have used the key figure assignment feature and used my key figure which is zhistory.
i have not used 9AVHISTORY.
my issue is i am not able to see the history periods and hence not able to see the data in history.

Hi
The data get loaded and its also available in the planning area, as you defined the time bucket profile according it i.e.24 month in past and 14 month in future. Its only while definition of data view you have not defined these flags you were unable to view this data.
Hence as I mentioned data has correctly loaded in the planning area just not getting viewed.
I hope this answers your question.
Thanks
Amol

Not able to see the records in master data

Hi friends
My requirement needs the data to be loaded from a RDM table.I created a data source in the R/3 and by using the extracto checker i am able to see the data.I created the info packages one for Attr and other Txt,replicated the datasource and loaded the data.I am able to see the data in the PSA and when i go into monitor in the infopackage it says the data has been loaded and it shows no errors.But I am not able to see this data in the master data info object.Can anyone please help me out???
Mouli

Hi
Check out your infopackage setting: if its upto PSA or to MD table also
Open Master data table in SE11 and check the OBJVERS field wether the MD is activated or not!
Regards
GSK

Not able to see latest text in XML Edit Form

Dear All,
I am facing the issue in XML forms.
1) I open an Edit Form and enter the title, Description and News text then save it. when i click on the show form, it's working fine as well able to see title, Description and News text.
2) Again I have edited that same form and add the extra text to description, News text then saved it. When i click on the show form, it's working fine as well able to see title, Description and News text.
3) 3rd time when i edit the same form, didn't see the extra text in Edit form. but able to see in show from.
Please find the attachment for easy understand.
Can you tell me the solution.
Regards,
Venu

Go to SPRO-MM-Purchasing-Messages-Text for messages- Define Texts for Purchase Order
Here in the Text for document item should be set for operation 2 menas for change than it will print on the PO.
In the heading also it needs to be setup for change

I'm not able to see Planning Application in Planning Webclient

Hi,
I have created a Classic Planning Application in WorkSpace successfully and I'm able to see the same application after Refreshing application in EAS Console.
I have done necessary steps registering application with the shared services and I'm able to see that application in shared services project also. But I'm trying to access this application through Planning URL I'm not able to see Planning Application in Drop down list.
Could anyone suggest me what could be the problem for this?
We are using HYperion Planning Fusion Edition 11.1.1.2 Version.
Thanks,
Suresh.

So you have created a planning application and it was succesful, you go directly to planning and don't see it in the dropdown?
If so when you created the application what instance you set it against, if you have more than one instance and you have it against the non active instance you won't see the planning application in the drop down.
Cheers
John
http://john-goodwin.blogspot.com/

Not able to see the data in the report

Hi All
      In my cube i am having data.But when i am running the report ,i am not able to see the data.
    The error its throwing is -No Applicable data found.
    what could be the problem,please provide me the idea to solve the problem.
Thanks&regards
syam prasad dasari

HI,
See that any restrictions are there in the report(Filters)....Give the same restrictions in Listcube and see if you are getting data or not.....
Thanks

Not able to see data in the qualifier table of the main tbl , Data Manager

Hi,
I have an issue of not able to see the data of two qualified table after populating them.
It is in mdm-5.5 ps4.
When populating data first time ,it shows up in those two table slots in the right side of the Data Manager.
However subsequently it does not show up in those slots , only by right click on the table and selecting "View/edit", the window pops up where those data shows up.
However unlike other qualified tables the data does not showup automatically for these two tables.
Appreciate any suggestion or feedback on this.
regards,
-reo

You may have checked the Filter Check Box next to the Qualified Lookup cell in Data Manager, when the current table is the Main Table.
You use the Filter Checkbox to limit the qualified table records by the current search selections.
Secondly, you have see if there are any Qualified Links to the main table record you are viewing.
If not, create the Qualified links in Data manager, for the main table record and the Qualified Table Record.
Once this is done, you will see the Display fields of the Qualified table for which the links exists for the given main table record.
Message was edited by:
Adhappan Thiagarajan

Not able to see data in Pivot table

Hi,
I have a issue with pivot table i have a column which displays values 0 and 1 and another column called month when i am placing this month column as a section and values column as a measure i am not seeing any values means i can see the month as header but instead showing 0 or 1 its showing blank columns. previously i created similar kind of table it worked but at that time values column data type is number this time its char. can anybody help me out how i can see the data in the pivot table. i already tried converting this column to number but still i am not able to see data in that values column.
Thanks

Hi copter,
Place the month column in rows and value column in measure section and check if results are coming.If still it doesnt come i suppose you dint apply aggregation rules to value column.In pivot view click values column and aggregate by /select min or max or either server complex and check your results.
(I suppose your aggregation rules is default)....Correct this one and you can place it in sections as per your requirement.
Cheers,
KK

Not able to see data in 0FIGL_V30 & 0FIGL_V31

Hi,
I've activated / installed standard business content for EpH3 i.e Mutltiprovider 0FIGL_M30 and entire data flow which includes reports and virtual providers 0FIGL_V30 & 0FIGL_V31.
I'm able to see data in cubes where above virtual providers read data from. here is the link from help.sap.com
http://help.sap.com/erp2005_ehp_03/helpdata/EN/6b/fdc62d9e0b444cb14b7f424d9f9cb7/frameset.htm
Issue is i'm not able to see data in Virtual providers 0FIGL_V30 & 0FIGL_V31 and hence in reports.
Can anyone advice please. thanks
SD

Hi All,
Yes I've checked data in underlying cubes.
Mulitprovider is fine.
I've added Master Data for both 0GL_ACCTP and 0ACCESSTP
RFC connection is fine.
No DTP & Transformation since this is Virtual Provider based on Functional Module.
However when I debug FM for 0FIGL_V30 & 0FIGL_V31 - I see no data and thought there might be master data issue b/w 0GL_ACCOUNT & 0GLACCEXT but MD is fine.
It just not pulling data.
Is there some setting I'm missing?
FM's used for Virtual Providers are
0FIGL_V30 - RS_BCT_FIGL_SREP_DATA_GET_V30
0FIGL_V31 - RS_BCT_FIGL_SREP_DATA_GET_V31
SD

Not able to see Data in Xcelsius 2008

Hi everyone,
My question is I am not able to see data in Xcelsius spreadsheet although I am able to connect to SAP BW and also able to see and select query but when I select Cross Tab Data in output Values it is not displaying in Xcelsius spreadsheet
System Info
Xcelsius 2008 Enterprise Trial Version SP 3.0
SAP BW 7.1 SP 6 ABAP and JAVA
Any help would be appreciated

Hi Rashid,
When you are using the BW conenction in Xcelsius you will not see any data in the spreadsheet at design time or at preview time.
To see the data you need to go SAP > Publish, then SAP > Launch to test the dashboard in the NetWeaver Portal as that is the only place where the data can be viewed.
Regards
Matt

Report exection problem for one user - not able to see the data.

Hello Friends ,
Need some help . I have got the one ticket from bussniess side about the report execution .
Unfortunately , I am also not having authorisation of that report due to sensible data.
Problem - User is executing the report but some how he is not ABLE TO see the data for one company code Hierachy .
I executed the same report through RSSMQ via his user id , and I got the below message.
All value were selected . Hierachy Authorisation cannot be used.
A displayed hierachy requier a hierachy authorisation .
But when i checked his authorisation , I am able to see that he should have authorisation to all the hireachy .
could you please let me know , how can I check more ?
Regards,

after accessing the report , u go to su53 tcode and check the authorization and u can see what is problem in authorization for the that user and u can send the details to secuity team to rectify the issue ,

BI Publisher: not able to see the xml data after creating a data model

I am learning BI publisher and trying to create a report data model
I created a new data model from the report tab, use query builder, able to see the results. Then i save it and try to launch XML view from clicking View .
I am getting unexpected exception, not able to see the XML view .
in the server console i got servlet exception, here is one of the line
com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303
Edited by: joysaha123 on Mar 17, 2010 6:07 PM

Hi karthik
Thanks for your response
Actually iam a beginner in java coding hence struggling to come up with the things
I tried putting your code and onserver side i see it is returning 09:12:17,234 INFO [STDOUT] [root: null]
actually the same program i wrote in java
and the same method i was calling from the main
and it is working fine and the xml document is getting displayed one important thing to be noted here is that the factory.newDocumentBuilder().parse(new File(filename));is returing XmlDocument
and the printing takes place
but the in same method public static Document parseXMLFile(String filename, boolean b) in servlet
the line factory.newDocumentBuilder().parse(new File(filename)); is returning DeferredDocumentImpl
and this creating problem , had it returned XmlDocument
i would have printed the elements one one
but as it is returning deferredimpl
iam unable to print the elements
could you please tell me why factory.newDocumentBuilder().parse(new File(filename)); is returning DeferredDocumentImpl
in servlets but in plain java pogram it is returing XmlDocument
Thanks
Bhanu

Not able to see PSA for the data souce 2lis_13_vdkon after enhaning

Dear Experts,
I have enhanced the extract structure of 2lis_13_vdkon in R/3 with 5 fields which are exist in transfer structure.
I have replicated the data source in BI but unfortunately i have not deleted the data in the PSA.
After replication when i try to activate the data source the system is giving Dump and im not able to see the PSA also.
Please help me out.
When i manage on the data source to c PSA, its giving error like this
Invalid DataStore object name 2LIS_13_VDKON_BB: Reason: No valid entry in table RSTS
The Dump when activating the data source is :
Runtime Errors SAPSQL_ARRAY_INSERT_DUPREC
Exception CX_SY_OPEN_SQL_DB
Date and Time 03.06.2009 09:46:55
How to correct the error
Use an ABAP/4 Open SQL array insert only if you are sure that none of
the records passed already exists in the database.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"SAPSQL_ARRAY_INSERT_DUPREC" "CX_SY_OPEN_SQL_DB"
"CL_RSAR_PSA===================CP" or "CL_RSAR_PSA===================CM006"
"_UPDATE_DIRECTORY_TABLES"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
Regards
venu

Hi Venu,
The issue I think is the PSA was not deleted cleanly. If you try and activate the PSA you will get the dump again.
..Probably if you go through the ABAP dump you will notice it is pointing to the following code;-
   75 * Put the fields of PSA to database without check, otherwise error by
   76 * activation of table
   77
   78   IF p_psa_exists EQ rs_c_false OR
   79      i_new_version     EQ rs_c_true.
>>>>>     INSERT rstsodsfield FROM TABLE l_t_odsfield.
   81   ELSE.
   82     DELETE FROM rstsodsfield
   83       WHERE odsname = l_s_odsfield-odsname
   84       AND version = l_s_odsfield-version.
   85     MODIFY rstsodsfield FROM TABLE l_t_odsfield.
Put a breakpoint in the code in line 78. and activate the DS..the program should stop in 78...change the value of variable rc_c_false so that line 82 gets executed. This will clean up the PSA entries in table rstsodsfield. Now activate the DS and delete the PSA entries in the PSA table.
We faced the same issue and resolved it this way.
Thanks
-Saif

Not able to see list of Plan applications when click on Navigate- Applica

Hi,
Somehow I am not able to see list of Planning applications when clicking on on Navigate->Applications->Planning from Workspace within Planning 9.3.1. Is there an Internet settings that I would need to change in order to see the list of applications. It seems like there are something disabled within my internet options or within my preferences.
Could someone please help?
Thanks.

Hi,
Is it just yourself that is experiencing this issue.
Are you using IE7, If so
Tools -> Internet Options -> Security -> Custom Level -> Allow script-initiated windows without size or position constraints
Otherwise it could be that you have not been given access.
Cheers
John
http://john-goodwin.blogspot.com/

Not able to see data in Hyperion Planning data forms.

Similar Messages

Maybe you are looking for