Not able to see elements to design the screen.
I have ECC 6.0 in our company.
I started learning ABAP Webdynpro.
When I opened the screen to design the first screen of my application with the elements like label, input field, button etc...left hand side under favourites, only lines are there instead of icons.
May I know that in any ECC 6.0, we can practice webdynpros.
Can you please say that do I need to do any setting or
the ECC i am using is not given priviliges to pratice webdynpros ?
Thanks in advance.
Hi,
U check the system settings with ur ADMIN.
for system settings,following link would help you.
In the view of Web Dynpro- "Page cannot be displayed screen"
Regards
Sajid
Similar Messages
-
Users not able to see remote users on the node network
Users that belong to one node are not able to see users in another calendar
server node. Both calendar servers are pointing to the same directory server.
Some errors that occur in the log files:
DEXOTEK ERRCODE Ox13608 -> SchedBaseOpen: Section name too long
DEXOTEK ERRCODE Ox13608 -> OpenConnection: SchedBaseOpenOnHost
And when uninode -cws nodeID is run, it does not report being able to see all
the users and resources on the remote nodes.
uninode: connected to hostname.net.xxx.com, node 10000
directory of items: 10 (USERS = 10/RESOURCES = 0)
CONNECTION EX AV Q-SIZE IN-PROCESS IMPORT-DIR
(10000)->xxxxxx.xxx.com(10001) 2 2 0 0 370 (U=370/R=0)
Here is the nodes.ini file:
+ H=xxxxxxx.xxx.com/N=10000
+ H=xxxx.xxx.com/N=10001
all=2
There is a reported bug, that 16 chars is max on domain names for the nodes.ini
file, which means that you need to change that file and use:
a) an alias that can be resolved on the network with either DNS or local
host files
b) use the IP address.
As documented in the release notes, here is the procedure on how to modify the
hostname when it is too long. Or how to modify the hostname for any reason.
Fix for long host names problem
If the fully qualified domain name for your network exceeds 16 characters, it
will be necessary to shorten the host name of all the servers in the Calendar
Server network . These instructions must be carefully followed to avoid causing
problems with the network. Ensure that the procedure is applied to ALL nodes in
the Calendar network.
1) The following procedure should be carried out on each server in the
Calendar network:
a) Bring the Calendar services down.
% unistop -y
b) Run the unidbfix command in export mode.
% unidbfix -export -n node-id
This will create a remotenode.ini file for each node on the server. The file is
located in the node's perm directory.
Example:
If you have two nodes on the server ROCK, node 1(in N1) and node (in N2), the
files are:
/users/unison/db/nodes/N1/perm/remotenode.ini
/users/unison/db/nodes/N2/perm/remotenode.ini
The remotenode.ini file will look something like this:
[1]
RN_NUMCONNECT = 2
RN_SURNAME = "unison"
RN_GIVENNAME = "unison"
RN_ORGUNIT1 = "uni2"
RN_ORGUNIT2 = "openmail"
RN_ORGANIZATION = "ABC Corp"
RN_ACCESSMETHOD = 2
RN_SERVICENAME = "unieng"
RN_HOSTNAME = "rock"
[2]
RN_NUMCONNECT = 2
RN_SURNAME = "unison"
RN_GIVENNAME = "unison"
RN_ORGUNIT1 = "uni4"
RN_ORGUNIT2 = "openmail"
RN_ORGANIZATION = "ABC Corp"
RN_ACCESSMETHOD = 2
RN_SERVICENAME = "unieng"
RN_HOSTNAME = "rock"
2) Once you have run unidbfix in export mode on all the servers, proceed as
follows:
a) Compare the remotenode.ini files and verify that the entries are the
same. In each file, you will note that an entry for the local node is not
included.
b) Edit one of the files (on any of the servers). This file will be
referred to as the master file. Add the appropriate entries for the
local node (copy the section from one of the other files). Modify the
RN_HOSTNAME in each of the sections of the master file to shorten the
name.
c) Copy the master file in the perm directories of each node on all the
servers.
3) Once the master file is in the perm directory of all the nodes, proceed as
follows on each server:
a) Run the unidbfix command in the -import mode.
% unidbfix -import -n node-id
b) Edit the nodes.ini file on the hub server and make the same changes to
the host names. You do not need to apply the changes.
c) Edit the [UTL] section of the /users/unison/misc/unison.ini file and
change the host name.
d) Start up the services.
% unistart
4) After all the changes have been made, run the uninode -cws all and
uninode -snc all commands and verify that the results are accurate.See this:
http://docs.info.apple.com/article.html?path=Mac/10.6/en/8203.html
You should then see your pcs listed in Finder's sidebar under the shared section.
Regards -
Not able to see requisition line in the PO after autocreation
Hello Friends,
When i am autocreating a purchase requisition onto a purchase order , i am not able to see that line.Though in the header it reflects the line amount but i am not able to see the line.
What could be the problem?
Thanks for all help.
Regards,
AmitYour problem is not clear.
Which line do you not see? The PO Line or the Req line?
Have you tried saving and requerying the PO? Does the PO line show up?
Sandeep Gandhi -
File Monitoring - Not able to see File Path on the Detail Information Tab
Hi Experts:
I am setting up the "File Monitoring" in the Solution Manager. I am having STA/PI01L_CRM570 on the Solution Manager.
And on the Satelite System - ECC I have STA/PI 01L_ECC600
While I am setting up the parameters, I am supposed to provide the file path in "Detail Information" tab page.
But I am just able to see two tabs:
Count and Short Text (optional).
I checked all the other tab but not able to locate where I need to provide the file path.
Can any one let me know, If I am missing anything or do I need to do any further steps.
Similarly for the File Size setting:
I am not able to see where I can define The parameter "File Pattern (e.g. *.log, *.txt or any string)" is mandatory.
Pls let me know.
Regards
JohnHello Johns,
You can find the FilePath in the 'Detail Information' tab if you double click the initial and predefined counter 001.
Best regards,
Goncalo Mouro Vaz -
Not able to see useSecurity property in the Managed BPEL Domain page
Hi,
I have installed Oracle BPEL PM 10.1.2.0.2 (Developer version) but i am not able to see the useSecurity property in the page. Are there any settings required before i can see the same.
Thanks,
-Ulrich.I have posted an entry on my blog describing this
http://clemensblog.blogspot.com/2006/02/bpel-security-changes-between-1012.html
hth clemens -
HT2474 I am not able to see my dock on the MacBook v 10.6.8
i am not able to see my dock and also getting error 13014 for itunes?.
If your trying to put pictures that are on your phone to your computer you import it see link below
http://support.apple.com/kb/HT4083 -
OIM 11gR2 not able to see forms within Design Console
Hi Guys
About the design Console, i'm not able to get any form when searching them within the design console...any idea?
I've already gone through the whole steps to configure the design console.
I gets "No record found for this query" even when i set a generic search.
Thanks!have you install any Connector in OIM? If yes then the form will be available in the design console. Or if you have created manually using design console->form designer
While creating Application Instance we create some form top of the base form those form won't be available in design console. however you can search those as below:
login to sysadmin url->go to Form Designer-> select Resource and the name of the Resource Object and find forms for respective RO.
--nayan -
Hi all,
When I open the iphoto library in my hard drive, its says that I have to open iphotos with the "control" option. So I did it and opened a "different library" and try again to do it from the extrenal drive, but again, its says the same thing. Please help! I would like to be sure all my back ups pictures are there and be able to watch them
Thanks in advance!A Time Machine backup of the iPhoto Library is not useabel by iPhoto until you Restore it with Time Machine. To restore the library go into Time Machine, go to the date you want, located your Pictures folder, select the library and use the Restore button.
Be warned that this will overwrite your current library so if it's just a test select Save Both in the window that comes up.
OT -
Not able to see GC information in the logs even if verbose:gc is set
Hi,
We have IAS 6.0 SP4.
My iasenv.ksh script is set to :
if [ "$script" = "kjs" ]
then
## Set all User Level JVM flags for KJS here.
SPACE=" "
# set this variable to YES to run SmartHeap enabled kjs
MEMOPT_KJS=YES
## Desired JVM flags. A grab bag of interesting JVM Tuning options:
## -Xoptimize -verbose:gc -Xss512k -Xms128m -Xmx256m -Xgenconfig:32m,32m,se
mispaces:64m,512m,markcompact
## Read the Solaris JDK 1.2.2 FAQ for more information.
JAVA_ARGS="-Xgenconfig:64m,64m,semispaces:64m,128m,markcompact -Xss512k -ve
rbose:gc -Xms128m -Xmx196m"
I tried to change the position of the verbose:gc to different places - still I don't see any GC information logged to KJS.
Am I missing some thing?
Thanks in advance
SangeetaSangeeta,
Just try with <b>"-verbose"</b> option in JAVA_ARGS (no :gc).
Should you require further information, get back.
Thanks visiting our forum,
Rakesh. -
The sites are in Armenian language and some words are seen by the cubes. There wasn't a problem of that kind in the last version on Firefox.
Here are some URLs
avtomir.am
auto.am
news.am
etc.You can try to toggle some Boolean <b>gfx.font_rendering</b> prefs on the <b>about:config</b> page to see if that helps.
To open the <i>about:config</i> page, type <b>about:config</b> in the location (address) bar and press the "<i>Enter</i>" key, just like you type the url of a website to open a website.<br />
If you see a warning then you can confirm that you want to access that page.<br /> -
Not able to see last row of the table
Hi,
I have a table in jsff page and it is displaying some rows. But if i navigate from some other page by Button, half of the last row of the table is not appearing(means vertical scroll bar is not displaying).
I am using Mozilla firefox 3.6.21 and my resolution is 1366*768(highest one) with windows7 installed on laptop.
The horizontal scrollbar overlaps half of the last record.Please refer the below screenshot.
ftp://bugftp.us.oracle.com/upload/bug_13/bug13535381/Discovery_scan_no_vertical_scrollbar_for_first_time.jpg
Regards,
Raghu.Man, don't you get it?
Post you question in an internal forum. We can't help you as we don't have access to Oracle internal stuff.
And you can't attach anything in to public forum, no file no image, nothing at all.
Please read the https://forums.oracle.com/forums/help.jspa and https://forums.oracle.com/forums/ann.jspa?annID=56 which covers this.
Timo -
Not able to see the records in master data
Hi friends
My requirement needs the data to be loaded from a RDM table.I created a data source in the R/3 and by using the extracto checker i am able to see the data.I created the info packages one for Attr and other Txt,replicated the datasource and loaded the data.I am able to see the data in the PSA and when i go into monitor in the infopackage it says the data has been loaded and it shows no errors.But I am not able to see this data in the master data info object.Can anyone please help me out???
MouliHi
Check out your infopackage setting: if its upto PSA or to MD table also
Open Master data table in SE11 and check the OBJVERS field wether the MD is activated or not!
Regards
GSK -
BI Publisher: not able to see the xml data after creating a data model
I am learning BI publisher and trying to create a report data model
I created a new data model from the report tab, use query builder, able to see the results. Then i save it and try to launch XML view from clicking View .
I am getting unexpected exception, not able to see the XML view .
in the server console i got servlet exception, here is one of the line
com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303
Edited by: joysaha123 on Mar 17, 2010 6:07 PMHi karthik
Thanks for your response
Actually iam a beginner in java coding hence struggling to come up with the things
I tried putting your code and onserver side i see it is returning 09:12:17,234 INFO [STDOUT] [root: null]
actually the same program i wrote in java
and the same method i was calling from the main
and it is working fine and the xml document is getting displayed one important thing to be noted here is that the factory.newDocumentBuilder().parse(new File(filename));is returing XmlDocument
and the printing takes place
but the in same method public static Document parseXMLFile(String filename, boolean b) in servlet
the line factory.newDocumentBuilder().parse(new File(filename)); is returning DeferredDocumentImpl
and this creating problem , had it returned XmlDocument
i would have printed the elements one one
but as it is returning deferredimpl
iam unable to print the elements
could you please tell me why factory.newDocumentBuilder().parse(new File(filename)); is returning DeferredDocumentImpl
in servlets but in plain java pogram it is returing XmlDocument
Thanks
Bhanu -
Not able to see the content of opened files (.jpg or .psd) in Photoshop CS6
I recently downloaded Adobe Design and Web Premium CS6. I am not able to see the content of any of the file I open (.psd or .jpg). I do see the file has been opened as the file name appears on the open file tabs, I also see the preview of the file in the Navigator Window and list of layers in the layers window. I am relatively new to this so might be missing on some option that needs to be turned on or something.
I am using Window 7 Professional, Service Pack 1, with 8GB RAM.
Any suggesstion/help is greatly appreciated.This is going to be the weak point:
Intel(R) HD Graphics card
While the Intel HD chip is fine for general computer work, it is weak for programs, like Photoshop and Adobe Premiere. The driver support is usually very bad, as well. If Lenovo does not have updated drivers, that work better, about the only choice that one has with a laptop is to turn OFF graphics accleration, and wait for a new driver. That will probably be very slow in coming.
Good luck,
Hunt
PS - Noel's link will list what you are missing. -
Not able to see the Adapters@Integration Directory!!
Hi,
I have created Data types,Messages Types, Message Interface in Integration Repository.
I have created a scenario in Directory and assigned Business systems too(I'm doing file to file scenario) and while trying to create Communication channels i'm unable to see the adapters under Parameters Tab.
<b> Its not showing any Adapters in ADAPTER TYPE option and also
Transport Protocol and
Message Protocol are blank.</b>
What could be the reason??
Please guide me in order to complete my scenario.
Thanks in Advance.
LNMhi madduri,
check these links....
Not able to see the adapter types in ID
Adapter Engine not found in ID
<b>check the last post here.... u will get ur answer !!!</b>
Adapter Type not found
Do these steps
1) Download XI7_0_SAP_BASIS_7.00_10_00.tpz which is available in a zipped format from the SAP Service Market Place.
2) Unzip the contents and copy the file XI7_0_SAP_BASIS_7.00_10_00.tpz (if you are using PI 7.0 or else download the file for your XI version) to
/usr/sap/<SAPSID>/SYS/global/xi/repository_server/import/
3) Goto Repository (Design)
4) Choose -> Tools -> Import Design Objects
regards
BILL
**mark the thread answered when u got ur answer
Maybe you are looking for
-
I have an old ipod, formatted on an apple laptop, and want to transfer all my music, most of which is not itunes, to my new apple computer. How can I do this?
-
Calling Report Through PL/SQL
Hi All, Is it possible to call a report through PL/SQL?If yes, please help me in this regard. Thanks. Vinay Kumar Garg
-
I am playing with the template where an event structure takes note of user inputs and a main state machine is then used to respond to these inputs. When I only monitor one control I use the 'NewVal' output to read out the changed value. But when I mo
-
Window 8.1 activation won't accept my product key
Window 8.1 64 but won't accept my product key. I know for a fact I didn't exceeded the amount of times of download. I want to use it for 64 bit. My old hardrive have it for 32 bit but I restored it to factory settings and install the 64 bit now that
-
Just upgraded and it says join a network? but nothing is working!
I Just upgraded my phone. Now it says join a network. But nothing is working. What can I do?