Not able to see "External Definitions" in Integration Repository

Hi Experts,
I am working on PI 7.1.
In the Integration Repository Menu :
SAP Basis --->SAP Basis 7.10 ->http://sap.com/xi/XI/System ->
"Service Interfaces",
"Message Types"
"Fault Message Types",
"Data Types",
"Adapter Metadata"
only are visible.
We need the "External Definitions". Is it not available in the standard SAP PI 7.1 ?
Do we have to import it explicitly?
Kindly advice.
Thanks in advance
~ Suraj

Hey NM,
Thanks a lot for your suggestion. problem got resolved when i did what you said (checking the attributes with developers user id's)
Thanks
Sourav

Similar Messages

Not able import SLD setings into my Integration repository

Hi,
I am not able import SLD setings into my Integration repository.
It says error while doing import via tools menu.
Please help to import SLD.
Regards,
Bala Raja

Hi,
While doing 'import of software component versions' in the IR thro tools menu, I have encountered an error like below.
"Unable to read software component versions from System Landscape Directory "sapserv:50000".
Note: I was not able to select SXI for related integration server in the Business System Wizard(SLD Setting).
Kindly advice me.

Users not able to create new ojects in Integration Repository

Hi,
    We did a heterogeneous copy of PI from AIX to HPUX. After that we have done few post installation steps w.r.to PI Specific usage type.
    all the developers are able to login to the integration repository, but when they are trying to "Edit" or "Create" new objects they are getting the following error
"You are not permitted to create new objects since the software component cannot be changed".
   this is working with PISUPER user but not with any development user id and passwd.
    any response is higly appreciated.
Thanks
Sourav

Hey NM,
    Thanks a lot for your suggestion. problem got resolved when i did what you said (checking the attributes with developers user id's)
Thanks
Sourav

Not able to import software component into Integration Repository from SLD

Hi,
I am new in XI(PI). I have created Technical system, business system and software component properly.
But when I go to IR and import the software component, it gives me an error message +*'Unable to read software component versions from System Landscape Directory "sapxi:50000".
Can anyone tell me the reason for this...and solution...Please help me out...
Thanks/Regards
Dinesh Singh.

Hi,
As your question says that,your are not able to import your software component version in to IR.
First better you cross check your software component is available or not in the SLD.
Can you please go to SLD and got to search field and give your software component name and search for the availablity.If you are able to see your software component detailse and after referesh your cache.environment->clear sld data cache
and try once and also please check your SLD information like logical system name and everything and try If still your facing the same problem let me know.
Just check if the replies in this thread help you:
unable to import from SLD
Unable to read software component versions from SLD
Please reward points
Thanks
Vikranth

Not able to see the Adapters@Integration Directory!!

Hi,
I have created Data types,Messages Types, Message Interface in Integration Repository.
I have created a scenario in Directory and assigned Business systems too(I'm doing file to file scenario) and while trying to create Communication channels i'm unable to see the adapters under Parameters Tab.
<b> Its not showing any Adapters in ADAPTER TYPE option and also
Transport Protocol and
Message Protocol are blank.</b>
What could be the reason??
Please guide me in order to complete my scenario.
Thanks in Advance.
LNM

hi madduri,
check these links....
Not able to see the adapter types in ID
Adapter Engine not found in ID
<b>check the last post here.... u will get ur answer !!!</b>
Adapter Type not found
Do these steps
1) Download XI7_0_SAP_BASIS_7.00_10_00.tpz which is available in a zipped format from the SAP Service Market Place.
2) Unzip the contents and copy the file XI7_0_SAP_BASIS_7.00_10_00.tpz (if you are using PI 7.0 or else download the file for your XI version) to
/usr/sap/<SAPSID>/SYS/global/xi/repository_server/import/
3) Goto Repository (Design)
4) Choose -> Tools -> Import Design Objects
regards
BILL
**mark the thread answered when u got ur answer

Not able to see ikm oracle incremental update and ikm oracle slowly changing dimensions under PHYSCIAL tab in odi 12c

not able to see ikm oracle incremental update and ikm oracle slowly changing dimensions under PHYSCIAL tab in odi 12c
But i'm able to see other IKM's please help me, how can i see them

Nope, It has not been altered.
COMPONENT NAME: LKM Oracle to Oracle (datapump)
COMPONENT VERSION: 11.1.2.3
AUTHOR: Oracle
COMPATIBILITY: ODI 11.1.2 and above
Description:
- Loading Knowledge Module
- Loads data from an Oracle Server to an Oracle Server using external tables in the datapump format.
- This module is recommended when developing interfaces between two Oracle servers when DBLINK is not an option.
- An External table definition is created on the source and target servers.
- When using this module on a journalized source table, the Journaling table is first updated to flag the records consumed and then cleaned from these records at the end of the interface.

Not able to see Enterprise Service hosted at SDN

Dear All
I want to access the Enterprise Service that are available at SDN and for that I created two proxies in Visual Admin.
I am trying to call those services in my Visual Composer. I am able to see the services in the Group.
But not able to see the required Enterprise Service.
When I click the + sign nothing comes under that group.
I am using VC 7.0
Can any body help me.
Thanks
Vivek
Hello Everybody
The ES available at SDN cannot be accessed outside SAP network because if we see the XML of the service available, the URLs within the XML are pointing to the internal hostname iwdf1030.dmzwdf.sap.corp of the system and not to the external hostname erp.esworkplace.sap.com. Unfortunately the internal hostname is not accessible or known to the internet and that is why we are not able to connect and retrieve the interface definition.
May be it will take some time to resolve this issuse, till then have a great time.
Regards
Vivek
Edited by: Vivek Kumar Mishra on Feb 28, 2008 11:26 AM

Hello Everybody
The ES available at SDN cannot be accessed outside SAP network because if we see the XML of the service available, the URLs within the XML are pointing to the internal hostname iwdf1030.dmzwdf.sap.corp of the system and not to the external hostname erp.esworkplace.sap.com. Unfortunately the internal hostname is not accessible or known to the internet and that is why we are not able to connect and retrieve the interface definition.
May be it will take some time to resolve this issuse, till then have a great time.
Regards
Vivek

Not able to see hierarchial org structure by clicking on Expand this branch

Dear experts,
I am currently using the Online data extraction via sap for Nakisa Integration with SAP Landscape.
I have completed the configuration of Nakisa with the help of configuration guide and administrator guide - After completing administrator steps the org chart is visible - When i navigate to the org structure i can see the org unit under the org structure root that i configured as an administrator in the general settings section.
When i click the + sign ie on expand this branch i am not able to see all teh org units under the displayed branch.
Can you please guide me regarding how one can view the org structure below the selected branch when i click on expand this branch section.
Manager Personnel Id is not maintained for this org unit - Should the user clicking on the expand this branch be the manager of the org unit to see the org structure.
Regards
HKishan

Dear Luke,
I am not able to see that navigation icons within an org chart box - The org unit that is displayed on clicking the orgchart does have branches in SAP but i am not able to see these navigation icons that lead me to these branches.
Is there any specific step that needs to be done to see these branches.
By the way what is the log file you are refering to is it the "PresentationResources.xml " or is it any other log file.
Regards
Hkishan

ITunes musical library located on a WD 2TB, ext. drv. Computer destroyed by virus; ED survived. Bought new laptop, connected ED. Not able to see library. ED shows as 'G:' 95% full. How can I reconnect my old library to new laptop?

I had my iTunes musical library on an ext. drv. WD 2TB, ‘MY BOOK ESSENTIAL'. Three weeks ago, my computer was infected by a virus that fried it. It did not affect the external drive. I bought a new computer: a laptop, Dell XPS, Intel Core i7-2630QM CPU, Windows 7 Home Premium. I have been able to connect the WD external drive; however, I am not able to see the musical library in my iTunes or Explorer. ‘My Computer’ shows the external drive as ‘G:’ 95% full. It reads, 32.1 GB free of 1.36 TB. When I click on the drive to see its contents, it shows nothing. The library in iTunes also shows nothing. Can anyone help, please? How can I reconnect my old musical library to my new laptop and iTunes? Many thanks.

Hmm, viruses don't generally "fry" drives. They can make bootable operating systems not bootable, hide data, and corrupt executable files. Software can potentially wipe all the data from the drive but it shouldn't be able to physically damage the drive. Bah! What's done is done.
As to unhiding your files assuming they are just hidden....
Hit Start > Run, type in CMD and press enter. Type the following at the prompt and then press enter:
attrib -h -s -r g:\*.* /d /s
This tells windows to clear the hidden, read-only, and system flags from all files on the drive, assuming of course your profile has the power to "see" the files and change them.
If that doesn't work then you may need to take ownership of the drive first. The drive may have security settings that make it "belong" to an account on your old system. Right-click on the drive in Windows Explorer and click Properties. Click the Security tab, the Advanced button, the Owner tab, then the Edit tab. Make yourself the owner, then you can make any other changes to the security settings you want to back on the Permissions tab. (If you can't change the owner log out and log back in as Administrator). For iTunes your account (or everyone) and SYSTEM need full access to all files. Any changes you make should be applied to "This folder, subfolders and files", should be inheritable and you should also replace the permissions on all child objects.
tt2

When I go to create a new project in imovie using the iPhone 5, I am not able to see any of my video clips or photos that are saved on the device.

When I go to create a new project in imovie using the iPhone 5, I am not able to see any of my video clips or photos that are saved on the device.

When you move or copy the compound clips with their events into an external drive all the events should be there. Not clear on why you want to move them into a single event. You can drag and drop from one event to another.
Why are you using compound clips? You can simply copy the project from each machine with used media onto the external drive and that should do it.

Except sadmin other users not able to see siebel BI publisher reports

Hi,
we have integrated siebel with BI publisher, except sadmin other users not able to see BI publisher reports, it is throwing error "No file has been attached to this record, please attach a file. SBL-SVC-00155".
when login with sadmin report is generating. we have created user sadmin on BI publisher. if we change that user sadmin on BI publisher to some other name, then sadmin not able to generate reports. is there any specific on user creation on BIP should match with siebel?
Thanks,
Joe

i suggest then dropping user and re-creating and then re-assigning permission (just keep his webcat files) - it'll be faster than looking into individual permissions
another possible option - did you check his browser? sometimes the screen resolution can be too low and they don't see it on the same screen - need to scroll.
is it possible he's not using the same Dashboard page as others? just check the "Report Links" to make sure
i'm not sure what else could be a cause of this

Not able to see crsytal report preview in Distributed Environment, Gettin e

Hi All,
I developed CR report using CR 2008, and integrated it with .Net 2.0, Its working fine in all the environments that we have except one environment. I'm not able to See the preview of Crystal report in that Environment but able to export the report to PDF format.
Details Of the Error is mentioned bellow:
My Application is working fine in In-Proc session, here we can see the preview, export to PDf format.
But when we are trying to See the report in Production Environment u2013 WebFarm (NT Cluster+SQL Cluster) which run in SQLSession. i'm not able to see the preview option. But when i'm exporting the same report to PDF format its working fine. Bellow is the error i got while i try for the preview options. kindly tell me solutions for this.
Attempted to read or write protected memory. This is often an indication that other memory is corrupt.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.AccessViolationException: Attempted to read or write protected memory. This is often an indication that other memory is corrupt.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[AccessViolationException: Attempted to read or write protected memory. This is often an indication that other memory is corrupt.]
   CrystalDecisions.ReportAppServer.XmlSerialize.XmlSerializerClass.CreateObjectFromString(String bsXmlData) +0
   CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Deserialize(SerializationInfo info, StreamingContext context) +165
[CrystalReportsException: Deserialization failed. You need to run "rassdk://C:\FIFA\FIFAUI\CrystalReports\GTSRequestedTransportSummaryReport.rpt" on a Report Application Server.]
   CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Deserialize(SerializationInfo info, StreamingContext context) +309
   CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper..ctor(SerializationInfo info, StreamingContext context) +51
   CrystalDecisions.CrystalReports.Engine.ReportDocument..ctor(SerializationInfo info, StreamingContext context) +200
[TargetInvocationException: Exception has been thrown by the target of an invocation.]
   System.RuntimeMethodHandle._SerializationInvoke(Object target, SignatureStruct& declaringTypeSig, SerializationInfo info, StreamingContext context) +0
   System.Reflection.RuntimeConstructorInfo.SerializationInvoke(Object target, SerializationInfo info, StreamingContext context) +108
   System.Runtime.Serialization.ObjectManager.CompleteISerializableObject(Object obj, SerializationInfo info, StreamingContext context) +273
   System.Runtime.Serialization.ObjectManager.FixupSpecialObject(ObjectHolder holder) +49
   System.Runtime.Serialization.ObjectManager.DoFixups() +223
   System.Runtime.Serialization.Formatters.Binary.ObjectReader.Deserialize(HeaderHandler handler, __BinaryParser serParser, Boolean fCheck, Boolean isCrossAppDomain, IMethodCallMessage methodCallMessage) +188
   System.Runtime.Serialization.Formatters.Binary.BinaryFormatter.Deserialize(Stream serializationStream, HeaderHandler handler, Boolean fCheck, Boolean isCrossAppDomain, IMethodCallMessage methodCallMessage) +203
   System.Web.Util.AltSerialization.ReadValueFromStream(BinaryReader reader) +788
   System.Web.SessionState.SessionStateItemCollection.ReadValueFromStreamWithAssert() +55
   System.Web.SessionState.SessionStateItemCollection.DeserializeItem(String name, Boolean check) +281
   System.Web.SessionState.SessionStateItemCollection.get_Item(String name) +19
   System.Web.SessionState.HttpSessionStateContainer.get_Item(String name) +13
   System.Web.SessionState.HttpSessionState.get_Item(String name) +13
   FIFAUI.Reports.CrystalReportDisplay.Page_Load(Object sender, EventArgs e) +142
   System.Web.Util.CalliHelper.EventArgFunctionCaller(IntPtr fp, Object o, Object t, EventArgs e) +14
   System.Web.Util.CalliEventHandlerDelegateProxy.Callback(Object sender, EventArgs e) +35
   System.Web.UI.Control.OnLoad(EventArgs e) +99
   System.Web.UI.Control.LoadRecursive() +50
   System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +627
Version Information: Microsoft .NET Framework Version:2.0.50727.3082; ASP.NET Version:2.0.50727.3082

It looks like you might be attempting to serialize the ReportDocument and store it in Session on a StateServer or SQLServer. The ReportDocument is NOT serializable. You can only put it in Session if the <sessionState> is InProc.

ODBC connection not able to see all schemas

Hi everyone,
We have noticed an unusual problem that just recently started. In our database, I have created a read-only user - only has the ability to connect to the database, and SELECT ANY TABLE. Then we have some applications (Crystal Reports and Lotus Notes Agents) that use this user to query data. The applications use an ODBC connection, and when we initially set this up, everything worked beautifully.
However, suddenly we have noticed that the ODBC connection is not able to see all of the schemas in the database. We have tested and confirmed this - using either 9.02 ODBC or 10.01, this happens with both of them. I created a couple new ODBC connections, one for each version, then I try to create a new Crystal Report, using this ODBC connection - when I connect using the read-only user, it connects just fine, but when it shows me all of the schemas available, I am only seeing about half of them (and of course not seeing the one that I really need to see).
However, when I use Microsoft Access, and try to import some External Data, and I use the same ODBC connections, then I AM seeing all of the schemas.
Has anyone ever seen anything like this? Any ideas on what I can do to troubleshoot?
Thanks,
Brad

I'm trying to get this issue figured out. Can you
tell me what you mean when you ask me to log in
directly as the same user using ODBC and query
ALL_TABLES - how would I do that?Using whatever Oracle database account you use in Crystal, log in to the database using SQL*Plus (or your favorite GUI like SQL Developer) and run a query like
SELECT owner, table_name
FROM all_tablesDoes that query show all the tables you expect, or are you missing some?
Also, you mention a parameter in the ODBC API that
controls which schemas are returned - is there any
way to see that value?An ODBC trace might show the value, I don't recall if the actual value is written out in the trace. Different front-end tools often have a place that allows you to filter out certain schemas, which is generally done by passing in a parameter to this ODBC API call. I don't know enough about your tools, though, to know where this might be.
Are there any other ODBC drivers I could try?There are plenty of third party ODBC drivers out there, but I would tend to be suprised if the ODBC driver was at fault here. You could also try patching the ODBC driver and/or Oracle client to the most recent patchsets.
Justin

I could not able to see bi pulisher reports in dashboar

hi gurus(bi publisher)
since one month i have been facing problem with bi publisher reports
We have created flex chats using bi publisher and we have placed all the chats in dashboard,
when we were maintaining users and groups in RPD Administrator and all user were able to see the flex chats,
for that we have created XMLP_ADMIN group in RPD and we assign the uses to that group,Now we are using external tables for user and groups and
in the table i have created XMLP_ADMIN group in admin and i have assign user to that group
now the problem is ,administrator is able to see the flex chat reports but all other user r not able to see the bi publisher reprots
i was getting an error like access is denied please contact to bi publisher Administrator,such error i am getting
i did all the changes in security configuration ,i set security model as bi_server and i have given everything
even though users can not able to see the chats
is there any one using bi-publisher reports in dashboard with external table authentication? please
help me out form this problem
Thanks

Hi
take a look at the post
http://bipconsulting.blogspot.com/2010/03/how-to-migrate-bi-publisher-reports-to.html
Hope this helps
Regards
Roy

Not able to see approvers in grc ac 10.0

Hello gurus,
I have configured workflows for access request for grc ac 10.0. When I submit a access request, my approver is not able to see any requests waiting for his approval. Also in the request status of the access request, no approvers are seen in given path when we click the instance status button. Please let me know where do we populate these approvers and how can we make them appear.
Thanks in advance,
Reyas

Faisal,
There are 2 places you need to define this.
1) Within the "Access Control Owner" settings (NWBC>Access Managemetn), you need to assign the "Role Owner" tag to the user/s. this will enable you to select the user to be assigned as a assignement or content approver within the role definition (2)
2) Against the actual role definition in Business Role Management (BRM/ERM) - you need to assign the user ID as the Assignment Approver of the role for the user to be able to approve the request as a Role Owner.
If you have somehow created your own BRFplus custom agent for role owners (SAP standard delivered agent is fine!), then you obviously need to maintain your Decision table/Tree results.
I strongly suggest you check these quick start guides out if you are having trouble configuring the basic settings.
Business Role Management set up and terminology
http://www.sdn.sap.com/irj/bpx/go/portal/prtroot/docs/library/uuid/80063a8e-1da6-2e10-aaa5-fda1f0936c37
First Access Request
http://www.sdn.sap.com/irj/bpx/go/portal/prtroot/docs/library/uuid/5067e447-5c64-2e10-7d9c-8f7e5953aadb
I hope this helps answer your question Faisal
All the best

Not able to see "External Definitions" in Integration Repository

Similar Messages

Maybe you are looking for