Not able to see last row of the table
Hi,
I have a table in jsff page and it is displaying some rows. But if i navigate from some other page by Button, half of the last row of the table is not appearing(means vertical scroll bar is not displaying).
I am using Mozilla firefox 3.6.21 and my resolution is 1366*768(highest one) with windows7 installed on laptop.
The horizontal scrollbar overlaps half of the last record.Please refer the below screenshot.
ftp://bugftp.us.oracle.com/upload/bug_13/bug13535381/Discovery_scan_no_vertical_scrollbar_for_first_time.jpg
Regards,
Raghu.
Man, don't you get it?
Post you question in an internal forum. We can't help you as we don't have access to Oracle internal stuff.
And you can't attach anything in to public forum, no file no image, nothing at all.
Please read the https://forums.oracle.com/forums/help.jspa and https://forums.oracle.com/forums/ann.jspa?annID=56 which covers this.
Timo
Similar Messages
-
Users not able to see remote users on the node network
Users that belong to one node are not able to see users in another calendar
server node. Both calendar servers are pointing to the same directory server.
Some errors that occur in the log files:
DEXOTEK ERRCODE Ox13608 -> SchedBaseOpen: Section name too long
DEXOTEK ERRCODE Ox13608 -> OpenConnection: SchedBaseOpenOnHost
And when uninode -cws nodeID is run, it does not report being able to see all
the users and resources on the remote nodes.
uninode: connected to hostname.net.xxx.com, node 10000
directory of items: 10 (USERS = 10/RESOURCES = 0)
CONNECTION EX AV Q-SIZE IN-PROCESS IMPORT-DIR
(10000)->xxxxxx.xxx.com(10001) 2 2 0 0 370 (U=370/R=0)
Here is the nodes.ini file:
+ H=xxxxxxx.xxx.com/N=10000
+ H=xxxx.xxx.com/N=10001
all=2
There is a reported bug, that 16 chars is max on domain names for the nodes.ini
file, which means that you need to change that file and use:
a) an alias that can be resolved on the network with either DNS or local
host files
b) use the IP address.
As documented in the release notes, here is the procedure on how to modify the
hostname when it is too long. Or how to modify the hostname for any reason.
Fix for long host names problem
If the fully qualified domain name for your network exceeds 16 characters, it
will be necessary to shorten the host name of all the servers in the Calendar
Server network . These instructions must be carefully followed to avoid causing
problems with the network. Ensure that the procedure is applied to ALL nodes in
the Calendar network.
1) The following procedure should be carried out on each server in the
Calendar network:
a) Bring the Calendar services down.
% unistop -y
b) Run the unidbfix command in export mode.
% unidbfix -export -n node-id
This will create a remotenode.ini file for each node on the server. The file is
located in the node's perm directory.
Example:
If you have two nodes on the server ROCK, node 1(in N1) and node (in N2), the
files are:
/users/unison/db/nodes/N1/perm/remotenode.ini
/users/unison/db/nodes/N2/perm/remotenode.ini
The remotenode.ini file will look something like this:
[1]
RN_NUMCONNECT = 2
RN_SURNAME = "unison"
RN_GIVENNAME = "unison"
RN_ORGUNIT1 = "uni2"
RN_ORGUNIT2 = "openmail"
RN_ORGANIZATION = "ABC Corp"
RN_ACCESSMETHOD = 2
RN_SERVICENAME = "unieng"
RN_HOSTNAME = "rock"
[2]
RN_NUMCONNECT = 2
RN_SURNAME = "unison"
RN_GIVENNAME = "unison"
RN_ORGUNIT1 = "uni4"
RN_ORGUNIT2 = "openmail"
RN_ORGANIZATION = "ABC Corp"
RN_ACCESSMETHOD = 2
RN_SERVICENAME = "unieng"
RN_HOSTNAME = "rock"
2) Once you have run unidbfix in export mode on all the servers, proceed as
follows:
a) Compare the remotenode.ini files and verify that the entries are the
same. In each file, you will note that an entry for the local node is not
included.
b) Edit one of the files (on any of the servers). This file will be
referred to as the master file. Add the appropriate entries for the
local node (copy the section from one of the other files). Modify the
RN_HOSTNAME in each of the sections of the master file to shorten the
name.
c) Copy the master file in the perm directories of each node on all the
servers.
3) Once the master file is in the perm directory of all the nodes, proceed as
follows on each server:
a) Run the unidbfix command in the -import mode.
% unidbfix -import -n node-id
b) Edit the nodes.ini file on the hub server and make the same changes to
the host names. You do not need to apply the changes.
c) Edit the [UTL] section of the /users/unison/misc/unison.ini file and
change the host name.
d) Start up the services.
% unistart
4) After all the changes have been made, run the uninode -cws all and
uninode -snc all commands and verify that the results are accurate.See this:
http://docs.info.apple.com/article.html?path=Mac/10.6/en/8203.html
You should then see your pcs listed in Finder's sidebar under the shared section.
Regards -
Not able to see requisition line in the PO after autocreation
Hello Friends,
When i am autocreating a purchase requisition onto a purchase order , i am not able to see that line.Though in the header it reflects the line amount but i am not able to see the line.
What could be the problem?
Thanks for all help.
Regards,
AmitYour problem is not clear.
Which line do you not see? The PO Line or the Req line?
Have you tried saving and requerying the PO? Does the PO line show up?
Sandeep Gandhi -
File Monitoring - Not able to see File Path on the Detail Information Tab
Hi Experts:
I am setting up the "File Monitoring" in the Solution Manager. I am having STA/PI01L_CRM570 on the Solution Manager.
And on the Satelite System - ECC I have STA/PI 01L_ECC600
While I am setting up the parameters, I am supposed to provide the file path in "Detail Information" tab page.
But I am just able to see two tabs:
Count and Short Text (optional).
I checked all the other tab but not able to locate where I need to provide the file path.
Can any one let me know, If I am missing anything or do I need to do any further steps.
Similarly for the File Size setting:
I am not able to see where I can define The parameter "File Pattern (e.g. *.log, *.txt or any string)" is mandatory.
Pls let me know.
Regards
JohnHello Johns,
You can find the FilePath in the 'Detail Information' tab if you double click the initial and predefined counter 001.
Best regards,
Goncalo Mouro Vaz -
Not able to see useSecurity property in the Managed BPEL Domain page
Hi,
I have installed Oracle BPEL PM 10.1.2.0.2 (Developer version) but i am not able to see the useSecurity property in the page. Are there any settings required before i can see the same.
Thanks,
-Ulrich.I have posted an entry on my blog describing this
http://clemensblog.blogspot.com/2006/02/bpel-security-changes-between-1012.html
hth clemens -
HT2474 I am not able to see my dock on the MacBook v 10.6.8
i am not able to see my dock and also getting error 13014 for itunes?.
If your trying to put pictures that are on your phone to your computer you import it see link below
http://support.apple.com/kb/HT4083 -
SQVI - Not able to see all fields in a table.
Hello all,
I was not able to add few fields in a table into my report as I am not able to see those table fields in SQVI. For example T508A-RTEXT. Please let me know.Hi,
As Tamas suggested, field RTEXT is actually a filed in text table T508S. You would have to join table T508S in your query.
For more info on text-tables, please look the below link:
[Text Tables|http://help.sap.com/saphelp_smehp1/helpdata/en/cf/21ea9e446011d189700000e8322d00/content.htm]
Thanks.
Ravi -
After a PAI, I am not able to slect line items in the table control.
Dear All,
In GR55 Report;after a PAI triggered (by Enter button or vertical scroll bar), I am not able to select any line-items in the table control. If no PAI triggered, the I am able to select as much as line item..
Can anybody help me..
-Ullas Ubefore display, while debugging , after pai, it will go in pbo modules,
so there u need to check the structure screen for the variable select. u might have declare one variable like sel(1) type c,
these variable u have written in table control attributes in select variable as itab-sel.
so check in debugging first. -
Hi all,
When I open the iphoto library in my hard drive, its says that I have to open iphotos with the "control" option. So I did it and opened a "different library" and try again to do it from the extrenal drive, but again, its says the same thing. Please help! I would like to be sure all my back ups pictures are there and be able to watch them
Thanks in advance!A Time Machine backup of the iPhoto Library is not useabel by iPhoto until you Restore it with Time Machine. To restore the library go into Time Machine, go to the date you want, located your Pictures folder, select the library and use the Restore button.
Be warned that this will overwrite your current library so if it's just a test select Save Both in the window that comes up.
OT -
The sites are in Armenian language and some words are seen by the cubes. There wasn't a problem of that kind in the last version on Firefox.
Here are some URLs
avtomir.am
auto.am
news.am
etc.You can try to toggle some Boolean <b>gfx.font_rendering</b> prefs on the <b>about:config</b> page to see if that helps.
To open the <i>about:config</i> page, type <b>about:config</b> in the location (address) bar and press the "<i>Enter</i>" key, just like you type the url of a website to open a website.<br />
If you see a warning then you can confirm that you want to access that page.<br /> -
Not able to see elements to design the screen.
I have ECC 6.0 in our company.
I started learning ABAP Webdynpro.
When I opened the screen to design the first screen of my application with the elements like label, input field, button etc...left hand side under favourites, only lines are there instead of icons.
May I know that in any ECC 6.0, we can practice webdynpros.
Can you please say that do I need to do any setting or
the ECC i am using is not given priviliges to pratice webdynpros ?
Thanks in advance.Hi,
U check the system settings with ur ADMIN.
for system settings,following link would help you.
In the view of Web Dynpro- "Page cannot be displayed screen"
Regards
Sajid -
Not able to see GC information in the logs even if verbose:gc is set
Hi,
We have IAS 6.0 SP4.
My iasenv.ksh script is set to :
if [ "$script" = "kjs" ]
then
## Set all User Level JVM flags for KJS here.
SPACE=" "
# set this variable to YES to run SmartHeap enabled kjs
MEMOPT_KJS=YES
## Desired JVM flags. A grab bag of interesting JVM Tuning options:
## -Xoptimize -verbose:gc -Xss512k -Xms128m -Xmx256m -Xgenconfig:32m,32m,se
mispaces:64m,512m,markcompact
## Read the Solaris JDK 1.2.2 FAQ for more information.
JAVA_ARGS="-Xgenconfig:64m,64m,semispaces:64m,128m,markcompact -Xss512k -ve
rbose:gc -Xms128m -Xmx196m"
I tried to change the position of the verbose:gc to different places - still I don't see any GC information logged to KJS.
Am I missing some thing?
Thanks in advance
SangeetaSangeeta,
Just try with <b>"-verbose"</b> option in JAVA_ARGS (no :gc).
Should you require further information, get back.
Thanks visiting our forum,
Rakesh. -
Not able to see the records in master data
Hi friends
My requirement needs the data to be loaded from a RDM table.I created a data source in the R/3 and by using the extracto checker i am able to see the data.I created the info packages one for Attr and other Txt,replicated the datasource and loaded the data.I am able to see the data in the PSA and when i go into monitor in the infopackage it says the data has been loaded and it shows no errors.But I am not able to see this data in the master data info object.Can anyone please help me out???
MouliHi
Check out your infopackage setting: if its upto PSA or to MD table also
Open Master data table in SE11 and check the OBJVERS field wether the MD is activated or not!
Regards
GSK -
Not able to see the result in particular column of BPC report
Dear All,
I have problem in one of the BPC report where I am not able to see the result into one column but rest of the users are able to see the result for same column in same report without any issues.
Generally, I used this report frequently but having such problem from last few days. Excel has created any logs which I need to clear? Please advice.
Request your help to resolve such problem please.
If you need any information, please let me know.
Thank You
Kind Regards
AnukulHello Anukul,
In the report what type of data you are trying to check in that column. can you please brief about report.
And also please check the excel cell format (right click and check it is a numeric or character), which may help to resolve this issue.
Regards,
Rajesh.K -
Not able to see the Adapters@Integration Directory!!
Hi,
I have created Data types,Messages Types, Message Interface in Integration Repository.
I have created a scenario in Directory and assigned Business systems too(I'm doing file to file scenario) and while trying to create Communication channels i'm unable to see the adapters under Parameters Tab.
<b> Its not showing any Adapters in ADAPTER TYPE option and also
Transport Protocol and
Message Protocol are blank.</b>
What could be the reason??
Please guide me in order to complete my scenario.
Thanks in Advance.
LNMhi madduri,
check these links....
Not able to see the adapter types in ID
Adapter Engine not found in ID
<b>check the last post here.... u will get ur answer !!!</b>
Adapter Type not found
Do these steps
1) Download XI7_0_SAP_BASIS_7.00_10_00.tpz which is available in a zipped format from the SAP Service Market Place.
2) Unzip the contents and copy the file XI7_0_SAP_BASIS_7.00_10_00.tpz (if you are using PI 7.0 or else download the file for your XI version) to
/usr/sap/<SAPSID>/SYS/global/xi/repository_server/import/
3) Goto Repository (Design)
4) Choose -> Tools -> Import Design Objects
regards
BILL
**mark the thread answered when u got ur answer
Maybe you are looking for
-
How to open a 'Save As' Dialog box in JSP?
Hi all, i need to export a CSV file. A button is provided to the user to choose the directory to save the file. My problem is how to open a 'Save As' dialog box in JSP? Thanks in advance
-
Compatibility between MII with different patch levels.
Hi all, I know that the best solution is to have the same MII patch level in MII development environment and in produztion enviroment. For many reasons that aren't under my direct controli, we'll have an MII 12.0.5 in development and MII 12.0.8 in p
-
Non-static variable this cannot be referenced from a static context
public static File saveFile() JFileChooser saving = new JFileChooser(); saving.setSelectedFile(new File("")); int returnVal = saving.showSaveDialog(AccountTest.this); if(returnVal == JFileChooser.APPROVE_OPTION) File fil
-
Preview: why slow with nothing edited?
I'm running a trial of After Effects, to see what the product can mean for my business. I run an Intel Quad core with 8GB of RAM. I have an empty 1280x720 29.7fps composition and no matter which 1280x720 video I import with different codecs, the prev
-
Hi all I want to know the FAUS1 related to a GL account.I used a FunctionModule "FI_Field_selection_determine". But this gets failed to satisfy my requirement in some cases. I m interested in finding the relation within any table. Is there any table