Not able to see latest text in XML Edit Form

Dear All,
I am facing the issue in XML forms.
1) I open an Edit Form and enter the title, Description and News text then save it. when i click on the show form, it's working fine as well able to see title, Description and News text.
2) Again I have edited that same form and add the extra text to description, News text then saved it. When i click on the show form, it's working fine as well able to see title, Description and News text.
3) 3rd time when i edit the same form, didn't see the extra text in Edit form. but able to see in show from.
Please find the attachment for easy understand.
Can you tell me the solution.
Regards,
Venu

Go to SPRO-MM-Purchasing-Messages-Text for messages- Define Texts for Purchase Order  
Here in the Text for document item should be set for operation 2 menas for change than it will print on the PO.
In the heading also it needs to be setup for change

Similar Messages

  • Not able to see PO text in prinout when printed after any change.

    When I make any change in PO (e.g. Quantity, price, delivery date), and take printout, I don't see text (item level). But when it was printed first time, I can see all texts in printout.
    Pls help.

    Go to SPRO-MM-Purchasing-Messages-Text for messages- Define Texts for Purchase Order  
    Here in the Text for document item should be set for operation 2 menas for change than it will print on the PO.
    In the heading also it needs to be setup for change

  • Not able to see data in Hyperion Planning data forms.

    Hi ,
    I created Hyperion planning EPMA application and loaded data in to it. But I am unable to see data in my data forms? Please give me solution for this?

    Hi,
    Here there are 2 things, once your epma heirarchy is ready did you deploy it against your planning App ? and incase if you haven't deployed your planning application, then old outline would be existing in Essbase and if you load data for old outline it will still take into but when you deploy the database gets restructured and older data gets restructured/removed.
    Before going onto that level first check if your load data to essbase completed successfully. and did you load data for the combinations on dataform ? ? Try manually inputting a number through data form and submit and do a refresh to see if value comes up. ? Check your data form settings , if you have enables suppress missing rows/blocks.
    Thanks
    Amith

  • BI Publisher: not able to see the xml data after creating a data model

    I am learning BI publisher and trying to create a report data model
    I created a new data model from the report tab, use query builder, able to see the results. Then i save it and try to launch XML view from clicking View .
    I am getting unexpected exception, not able to see the XML view .
    in the server console i got servlet exception, here is one of the line
    com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303
    Edited by: joysaha123 on Mar 17, 2010 6:07 PM

    Hi karthik
    Thanks for your response
    Actually iam a beginner in java coding hence struggling to come up with the things
    I tried putting your code and onserver side i see it is returning 09:12:17,234 INFO [STDOUT] [root: null]
    actually the same program i wrote in java
    and the same method i was calling from the main
    and it is working fine and the xml document is getting displayed one important thing to be noted here is that the factory.newDocumentBuilder().parse(new File(filename));is returing XmlDocument
    and the printing takes place
    but the in same method public static Document parseXMLFile(String filename, boolean b) in servlet
    the line factory.newDocumentBuilder().parse(new File(filename)); is returning DeferredDocumentImpl
    and this creating problem , had it returned XmlDocument
    i would have printed the elements one one
    but as it is returning deferredimpl
    iam unable to print the elements
    could you please tell me why factory.newDocumentBuilder().parse(new File(filename)); is returning DeferredDocumentImpl
    in servlets but in plain java pogram it is returing XmlDocument
    Thanks
    Bhanu

  • I'm using Iphone 5 .After updating it with the latest software i.e iOS 7.0.6 I'm not able to see the wats app and imsg on my notification until and unless i activate the "Show on Lock Screen" which was not same as in the earlier software version.Help plz

    I'm using Iphone 5 .After updating it with the latest software i.e iOS 7.0.6 I'm not able to see the wats app and imsg on my notification center when my phone is locked until and unless i activate the "Show on Lock Screen" under each application. which was not same as in the earlier software version.I dnt want my messages or watsapp msges to be displayed on home screen when locked but should be displayed on the notification center on lock condition.
    Please suggest a solution or @Apple please get a software release which can remove this bug .

    We aren't Apple, just users like you. Have you tried a reset? Hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss)

  • Help! I have an iPhone 4 and when I tap the "messages" thumbnail I'm not able to see a list of my text message threads.

    Help! I have an iPhone 4 and when I tap the "messages" thumbnail I'm not able to see a list of my text message threads.

    I contacted Verizon (my phone's carrier) and they told me to simultaneously press the on/off button and the menu button. That rebooting fixed the problem, but will I have to do this all the time? Wonderinf if I should take the phone back to the Apple store and get a new one. I've had the phone about two weeks.

  • Not able to see iby_fd_extract_ext_pub custom tags of in XML data

    Hi Experts,
    I have customized the iby_fd_extract_ext_pub package to add the custom tags in the payment format xml data.Package status is valid but I am not able to see any of the custom element in the XML Data.
    Please share your experience if you faced similar issue.
    Regards,
    Brajesh

    1. Do not prefix it just put your code in and compile - unless you want to call XX_IBY_FD_EXTRACT_EXT_PUB from IBY_FD_EXTRACT_EXT_PUB to have minimal impact to IBY_FD_EXTRACT_EXT_PUB.
    2. You won't be able to put in an additional parameter, you'll need to derive the Payment Process Profile from SQL by linking from payment document to payment process to payment process profile; or just get the org from, say, the first invoice in the batch - as long as you always group by organization this will be fine.
    3. Yes, it is probably that a patch will overwrite your customization - make sure you test it after each IBY patch - use applcust.txt and make sure your DBA's check adpatch logs for the file being overwritten!
    Regards,
    Gareth
    http://garethroberts.blogspot.com
    http://www.virtuate.com

  • Not able to see hierarchial org structure by clicking on Expand this branch

    Dear experts,
    I am currently using the Online data extraction via sap for Nakisa Integration with SAP Landscape.
    I have completed the configuration of Nakisa with the help of configuration guide and administrator guide - After completing administrator steps the org chart is visible - When i navigate to the org structure i can see the org unit under the org structure root that i configured as an administrator in the general settings section.
    When i click the + sign ie on expand this branch i am not able to see all teh org units under the displayed branch.
    Can you please guide me regarding how one can view the org structure below the selected branch when i click on expand this branch section.
    Manager Personnel Id is not maintained for this org unit - Should the user clicking on the expand this branch be the manager of the org unit to see the org structure.
    Regards
    HKishan

    Dear Luke,
    I am not able to see that navigation icons within an org chart box - The org unit that is displayed on clicking the orgchart does have branches in SAP but i am not able to see these navigation icons that lead me to these branches.
    Is there any specific step that needs to be done to see these branches.
    By the way what is the log file you are refering to is it the "PresentationResources.xml " or is it any other log file.
    Regards
    Hkishan

  • Apple TV and iTunes not able to see each other

    I think I have found a bug in either iTunes or Apple TV. My network configuration is a bit complicated so I will describe it first.
    Cable modem into my house hitting a Linksys WRT330N router at a central box in my laundry room. From there my house is hard wired to different rooms of the house. One goes to my office where I have a Apple Extreme N airport, connected to my PowerMac and my iTunes library. Again out of the central point in the laundry room again hard wired I have a wire going to my living room, where I have another Apple Extreme N airport, this is where my Apple TV is hard wired too. I have all the latest firmware and software installed on all my devices. Also both Airport Extreme's are setup using bridge mode and letting the Linksys serve the IP addresses for my network.
    Now to the problem. I can not explain when or why but my Apple TV and iTunes are not able to see each other after about 48 hours. I have tried all kinds of troubleshooting steps including changing my connection from being hard wired to wireless connecting directly to the Airport Extreme my iTunes computer is connected too. I know my network connection is good as I can see trailers and pull up video's from uTube.
    The only way to get them to see each other again is to do a factory reset of my Apple TV. After I do this they can both see each other again. But again after about 48 hours they lose the ability to see each other. I have taken these steps twice now to fix the problem
    I just finished reseting my Apple TV and am going to watch it to see when it stops working the next time.
    All of these problems started the other day when I introduced a new Apple Extreme N router in my my network. The airport Extreme seem to be working fine with my PS3 and XBox 360 that is also connected to it. So I don't think it's the router that is causing the problem.
    If I had to guess I would say something in the Apple TV is locking up. Although I have tried power cycling the Apple TV which does not fix the problem. I'm going through 3 routers to get between the Apple TV and the iTunes library somehow it appears the Apple TV is losing it way.
    I welcome any help as I don't want to have to keep factory resetting my Apple TV to keep it working.

    Fascinating just reading about your setup. I have a WRT350N and have noticed that it will drop its speed, sometimes down to 1Mbps. It seems to do so at about the same time every day, but usually comes back to speed in about 5 minutes. In my experience, the Apple TV will disconnect if the speed falls this low. Try monitoring the Linksys with Netstumbler, Vistumbler, or just in the Windows Network utility.
    Check the "lease obtained" and "lease expired" times for your router to see if that is when the network fails. I've just finished reading an angry thread over at the Linksys forum about the WRT330N where someone mentioned that the router wasn't renewing its lease.
    "I cannot set it run off automatic DHCP from the WRT330N, the router will not assign it an IP every time the lease expires, causing me to have to manually set an IP on the Print server. That's annoying. Having the router drop IP's to individual machines after 12-48 hours...very annoying."
    http://forums.linksys.com/linksys/board/message?board.id=Wireless_Routers&thread .id=67412
    If that is the problem, then I would consider setting up a Static IP address for your Apple TV. You can do that through the user interface -> Settings -> Network -> Configure ... (Quite intuitive as you only have change IP address and the subsequent details remain the same.)
    My router assigns IP Addresses in the ranges of 192.168.1.100 ->149. The idea here is to choose an address outside of that range but is not greater than 192.168.1.253 (and should not end in the number 1). You shouldn't have to change the linksys router as long as 50 clients are assigned in that range. You'll have to figure that out by accessing your router webpage at browser address 192.168.1.1 -> the default password is "admin" (without the quotes).
    Good luck.

  • After webcatalog migration from 10.1.3.3 to 10.1.3.4.2 not able to see user

    Hi Gurus,
    I am facing an issue with web catalog migration.
    Currently we are on 10.1.3.3 version and upgrading to 10.1.3.4.2.
    As part of migration i have taken the RPD, NQSConfig, Web catalog, instanceconfig.xml files as backup. i followed manual way while taking the web catalog backup i.e zipped(tar) the prod catalog and moved it to some folder.
    After 10.1.3.4.2 installation i have moved this zip file to the /OracleBIData/web/catalog and unzipped it. restarted all the servers. when we logged in presentation services we are not able to see the reports which we saved in "My Folder" when it comes to the reports which we saved in "Shared Folder" i am able to see all the reports and dashboards.
    to debug this further i opened the web catalog by using web catalog manager and found out that all the reports and .atr files are there under that user ( USER folder, corresponding user folder ), and instead of my presentation server recognizing this folder its creatin new folder for the same user.
    Because of this issue our release plans are getting postponed, please advise me.
    what could be the problem and if i have done some thing wrong while taking the backup pls let me know the best way of backing up the web catalog.
    Thanks,
    Seshu

    try this:
    Archive all folders from 10.1.3.3 using catalog manager.
    Update instance config on 10.1.3.4.2 so that it'll create a new webcat, open it and unarchive above folders.
    If helps pls mark

  • Modify New VO but not able to see Attribute Value.

    Hi ,
    I am facing one problems during my VO extend. I have done below step,
    1) Created new XXCustomVO based on exsiting CustomVO.Created new Attribute, modify SQL and mapped and gave new Name XXCustomInfoVO.
    2) Assign this new XXCustomVO to new filed with Attribute name.
    4) Copy XXCustomVO.xml and all class file from Desktop to Server in respecitve folder.
    5) Import Page regions which i have created New Item.
    6) Import with JPXImport.("Porject substitutions" )
    7) Now I run the page no errors found but not able to see new attribute Data.
    Then I checked "About Page" but everything is refected correctly only not able to see new attribute data.
    Can you please help me out. Is there any wrong thing i am doing or something is missing still.
    Thanks

    Hi ,
    Even exsiting attribute value alos not display. I mean I have 20 attribute in this exsiting VO and I have add one more XX attribute and same as XXVO but non of value is display out of 21 attibute.
    Even i have hard coded "1234" for this attribute but always return null.
    Where I have to foucs.
    thanks
    Raj
    Message was edited by:
    RajPatel

  • Not able to see Enterprise Service hosted at SDN

    Dear All
    I want to access the Enterprise Service that are available at SDN and for that I created two proxies in Visual Admin.
    I am trying to call those services in my Visual Composer. I am able to see the services in the Group.
    But not able to see the required Enterprise Service.
    When I click the + sign nothing comes under that group.
    I am using VC 7.0
    Can any body help me.
    Thanks
    Vivek
    Hello Everybody
    The ES available at SDN cannot be accessed outside SAP network because if we see the XML of the service available, the URLs within the XML are pointing to the internal hostname iwdf1030.dmzwdf.sap.corp of the system and not to the external hostname erp.esworkplace.sap.com. Unfortunately the internal hostname is not accessible or known to the internet and that is why we are not able to connect and retrieve the interface definition.
    May be it will take some time to resolve this issuse, till then have a great time.
    Regards
    Vivek
    Edited by: Vivek Kumar Mishra on Feb 28, 2008 11:26 AM

    Hello Everybody
    The ES available at SDN cannot be accessed outside SAP network because if we see the XML of the service available, the URLs within the XML are pointing to the internal hostname iwdf1030.dmzwdf.sap.corp of the system and not to the external hostname erp.esworkplace.sap.com. Unfortunately the internal hostname is not accessible or known to the internet and that is why we are not able to connect and retrieve the interface definition.
    May be it will take some time to resolve this issuse, till then have a great time.
    Regards
    Vivek

  • I am not able to see the sent emails in the sent items folder. I am using Apple mail. Does anyone have any solutions?

    I can't see the latest emails I sent in the sent items in Apple mail. Also, I am not able to see my old emails in the inbos folder. Can someone please help me out with this?

    Hello Vidish,
    You may need to indicate to the Mail app which folder should be used for sent messages. This can be done by selecting your 'Sent' mailbox, and choosing (from the 'Mailbox' menu) Use This Mailbox For -> Sent.
    Mail (Mountain Lion): If messages aren’t stored where expected on the mail server
    http://support.apple.com/kb/PH11810
    Cheers,
    Allen

  • I have Photoshop Lightroom 5 and have downloaded Camera Raw 8.7.1 &DNG converter successfully. I have a new Sony Alpha 7 11 model ILCE-A7M2 that is supported by LR5. I am still not able to see the RAW pictures. The message says preview unavailable for thi

    I have Photoshop Lightroom 5 and have downloaded Camera Raw 8.7.1 &DNG converter successfully. I have a new Sony Alpha 7 11 model ILCE-A7M2 that is supported by LR5. I am still not able to see the RAW pictures. The message says preview unavailable for this file DSC-ARW. Whatelse I should be doing to see my pictures? Can someone help?
    Anita

    The support for that camera was added in the very latest release of Lightroom, version 5.7.1. Having downloaded Camera Raw 8.7.1 will have no effect on Lightroom because Lightroom doesn't use the Camera Raw plug-in. You need to make sure you have updated Lightroom to the very latest release in order to have support for that camera.

  • Ipod as hard disk - Why am I not able to see the whole file?

    I'm using my 80 gig 5th gen ipod as a hard disk for the first time. I've dragged a 32 KB text file to the ipod. When I scroll though the file all is great...but I'm not able to see the whole file? It's like I get one page and that's all. Any ideas to help me?

    Do you mean the Notes function? If so, the file size per note is, I believe, 4k. Therefore, you'd need to break up a 32k file into several parts or it will be truncated.

Maybe you are looking for