Not able to see LDAP dropdown in Infoview XIR 3.1

We are XIR3.1 with IIS 7.0 in Windows 2008 server
when i try to login through CMC i can see the
authetication drop down for LDAP,Enterprise and WindowsAD
when i try to login through the Infoview
i cant see the Authentication drop down default its going to the enterprise authentication
i did some research i need to do the change in the web.xml file from false to true and retart the IIS service but still no change
here is the location i changed the file is this the right one
C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\warfiles\WebApps\InfoViewApp\WEB-INF
i changed in two places in the file cms.visible and authentication.visible
am i chanigng in right place?do i need to change anything else?? please advice guys
Edited by: ashok kumar achari on Oct 22, 2009 6:47 PM
Edited by: ashok kumar achari on Oct 22, 2009 10:43 PM

Thanks for you Response
I checked in the location
C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\Web Content\InfoViewApp
i can see three folders
AnalyticalReporting
InfoViewApp
Xcelsius
when i look into the location
C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\Web Content\InfoViewApp\InfoViewApp
all i can see one folder 'help'
i amde a search for web.config file
i found it in couple of places like roots of(C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\Web Content\InfoViewApp\AnalyticalReporting) AnalyticalReporting,Xcelsius
how can i resolve this? i dont under stand my network guy says he installed 3.1 on IIS
and also Tim you mentioned
can search SAP notes for this if my path is a bit off. I know it's been documented
can you please tell me where can i find that documentation
please advice
Edited by: arjunanand1882 on Oct 23, 2009 2:06 PM
Edited by: arjunanand1882 on Oct 23, 2009 2:08 PM

Similar Messages

Not able to see Web Intelligence in Infoview

Hi Experts!
We are on SAP BI7 and BOXI 3.0 and have installed the Integration kit successfully.
Everything seems to be fine as in , I was able to configure SAP authentication and am able to log into Infoview with my SAP credentials.
But the problem is after I have built my universe, when I log into Infoview with my SAP credentials, I am unable to see the option 'Web Intelligence' (ubder Documnet list -New) to create a WI document.
But when I am logging in as Admintrator I can see that option.
Can you please let me know what is it that I am missing?
Is it a problem with some authorisation?My SAP BW system has been enabled to accept tickets.
Thanks in Advance.
Sreeranjani.

hi,
when you import SAP roles they become User groups in BusinessObjects Enterprise. By default a new User groups is ONLY part of the group Everyone which in a default installation does not have enough rights to create a Web Intelligence report. You need to assign the necessary rights on the BusinessObjects system to those user groups
Ingo

Crystla Report Samples not able to see in infoview

Hi All,
I have install the BOE XI 3.0 on one system. i am not able to see the crystal report in infoview means when i clicked on any sample report or any zreports developed by me but i can not see the data . though i transfered it into PDF and then i can see it from infoview in PDF format, while i also want to see it in crystal report format also.
My webi reports and dashboard can see from infoview but crystal report can't be able to see.
Thanks & Regards,
Komik Shah

In IR I created all DT,MT,MM,MI but when I want to activate it in changelist I am able to see my fields.
1. Make sure you have saved the objects.
2. Go to changelist tab -> Under user select your username and check if you can see anything.
Regards
Soumen...

I'm not able to see Planning Application in Planning Webclient

Hi,
I have created a Classic Planning Application in WorkSpace successfully and I'm able to see the same application after Refreshing application in EAS Console.
I have done necessary steps registering application with the shared services and I'm able to see that application in shared services project also. But I'm trying to access this application through Planning URL I'm not able to see Planning Application in Drop down list.
Could anyone suggest me what could be the problem for this?
We are using HYperion Planning Fusion Edition 11.1.1.2 Version.
Thanks,
Suresh.

So you have created a planning application and it was succesful, you go directly to planning and don't see it in the dropdown?
If so when you created the application what instance you set it against, if you have more than one instance and you have it against the non active instance you won't see the planning application in the drop down.
Cheers
John
http://john-goodwin.blogspot.com/

Not able to see SAP Authontication in CMC

Hi,
We have installed SAP BO XI3.1 SP3 linux version. We have been successfully installed business objects XI 3.1 SP3 on linux X64bit version. We have installed SAP integration also on same server we have installed it sucessfully. I was able to see SAP credentials at logon screen of CMC and Infoview. We login using adminsitrator we are not able to see SAP underr CMC authontication tab.
Can any one have faced same issue and how it was resolved can you please step by step instructions.
If any one have document that related to sap integration kit installation on linux please provide.
Thanks in advance,
Druthi Sri.

Hi Druthi Sri,
Have you specified the path of sapjco.jar file in catalina.sh ( file location: /../tomcat/bin)
pls see below procedure to set classpath
CLASSPATH="$CLASSPATH":"$CATALINA_HOME"/bin/bootstrap.jar:"$CATALINA_HOME"/bin/commons-logging-api.jar:"$CATALINA_HOME"/BO/bobje/tomcat/common/lib/sapjco.jar
and restart tomcat server.
Regards,
Ram

Not able to see the data in the report

Hi All
      In my cube i am having data.But when i am running the report ,i am not able to see the data.
    The error its throwing is -No Applicable data found.
    what could be the problem,please provide me the idea to solve the problem.
Thanks&regards
syam prasad dasari

HI,
See that any restrictions are there in the report(Filters)....Give the same restrictions in Listcube and see if you are getting data or not.....
Thanks

Not able to see data in the qualifier table of the main tbl , Data Manager

Hi,
I have an issue of not able to see the data of two qualified table after populating them.
It is in mdm-5.5 ps4.
When populating data first time ,it shows up in those two table slots in the right side of the Data Manager.
However subsequently it does not show up in those slots , only by right click on the table and selecting "View/edit", the window pops up where those data shows up.
However unlike other qualified tables the data does not showup automatically for these two tables.
Appreciate any suggestion or feedback on this.
regards,
-reo

You may have checked the Filter Check Box next to the Qualified Lookup cell in Data Manager, when the current table is the Main Table.
You use the Filter Checkbox to limit the qualified table records by the current search selections.
Secondly, you have see if there are any Qualified Links to the main table record you are viewing.
If not, create the Qualified links in Data manager, for the main table record and the Qualified Table Record.
Once this is done, you will see the Display fields of the Qualified table for which the links exists for the given main table record.
Message was edited by:
Adhappan Thiagarajan

Not able to see data in Pivot table

Hi,
I have a issue with pivot table i have a column which displays values 0 and 1 and another column called month when i am placing this month column as a section and values column as a measure i am not seeing any values means i can see the month as header but instead showing 0 or 1 its showing blank columns. previously i created similar kind of table it worked but at that time values column data type is number this time its char. can anybody help me out how i can see the data in the pivot table. i already tried converting this column to number but still i am not able to see data in that values column.
Thanks

Hi copter,
Place the month column in rows and value column in measure section and check if results are coming.If still it doesnt come i suppose you dint apply aggregation rules to value column.In pivot view click values column and aggregate by /select min or max or either server complex and check your results.
(I suppose your aggregation rules is default)....Correct this one and you can place it in sections as per your requirement.
Cheers,
KK

Not able to see data in 0FIGL_V30 & 0FIGL_V31

Hi,
I've activated / installed standard business content for EpH3 i.e Mutltiprovider 0FIGL_M30 and entire data flow which includes reports and virtual providers 0FIGL_V30 & 0FIGL_V31.
I'm able to see data in cubes where above virtual providers read data from. here is the link from help.sap.com
http://help.sap.com/erp2005_ehp_03/helpdata/EN/6b/fdc62d9e0b444cb14b7f424d9f9cb7/frameset.htm
Issue is i'm not able to see data in Virtual providers 0FIGL_V30 & 0FIGL_V31 and hence in reports.
Can anyone advice please. thanks
SD

Hi All,
Yes I've checked data in underlying cubes.
Mulitprovider is fine.
I've added Master Data for both 0GL_ACCTP and 0ACCESSTP
RFC connection is fine.
No DTP & Transformation since this is Virtual Provider based on Functional Module.
However when I debug FM for 0FIGL_V30 & 0FIGL_V31 - I see no data and thought there might be master data issue b/w 0GL_ACCOUNT & 0GLACCEXT but MD is fine.
It just not pulling data.
Is there some setting I'm missing?
FM's used for Virtual Providers are
0FIGL_V30 - RS_BCT_FIGL_SREP_DATA_GET_V30
0FIGL_V31 - RS_BCT_FIGL_SREP_DATA_GET_V31
SD

Not able to see Data in Xcelsius 2008

Hi everyone,
My question is I am not able to see data in Xcelsius spreadsheet although I am able to connect to SAP BW and also able to see and select query but when I select Cross Tab Data in output Values it is not displaying in Xcelsius spreadsheet
System Info
Xcelsius 2008 Enterprise Trial Version SP 3.0
SAP BW 7.1 SP 6 ABAP and JAVA
Any help would be appreciated

Hi Rashid,
When you are using the BW conenction in Xcelsius you will not see any data in the spreadsheet at design time or at preview time.
To see the data you need to go SAP > Publish, then SAP > Launch to test the dashboard in the NetWeaver Portal as that is the only place where the data can be viewed.
Regards
Matt

Not able to see hierarchial org structure by clicking on Expand this branch

Dear experts,
I am currently using the Online data extraction via sap for Nakisa Integration with SAP Landscape.
I have completed the configuration of Nakisa with the help of configuration guide and administrator guide - After completing administrator steps the org chart is visible - When i navigate to the org structure i can see the org unit under the org structure root that i configured as an administrator in the general settings section.
When i click the + sign ie on expand this branch i am not able to see all teh org units under the displayed branch.
Can you please guide me regarding how one can view the org structure below the selected branch when i click on expand this branch section.
Manager Personnel Id is not maintained for this org unit - Should the user clicking on the expand this branch be the manager of the org unit to see the org structure.
Regards
HKishan

Dear Luke,
I am not able to see that navigation icons within an org chart box - The org unit that is displayed on clicking the orgchart does have branches in SAP but i am not able to see these navigation icons that lead me to these branches.
Is there any specific step that needs to be done to see these branches.
By the way what is the log file you are refering to is it the "PresentationResources.xml " or is it any other log file.
Regards
Hkishan

Not able to see the tree on the jspx page after running

Hi All,
This is something strange.I am dragging the VO on the page fragment from the data control as adf tree. And I am using the panel collection as component for adf tree.
After running the jspx when I am moving to the fragment I am not able to see the tree.
However when I am running the AM it is working properly for the view objects and view link used to populate the tree.
Can anybody put some thoughts on this.
Thanx
Kanika

Thnx for your replies..
I am dropping taskflow as region . I am not using the switcher component.
On left side of the page the tree is visible now. but the taskflow is not refreshing on the click of the tree node based on the value of the node.
Please advice how to accompolish this now??

Not able to see the request in ODS to activate

Hi all,
I have a content ODS, i scheduled a infopack and the data came in thru ok. But inorder to upload the data into the cube, i know i need to activate it before. But when i rightclick and go to activate data in the context menu .. there is a popup which shows all the request id's in the ODS. but i'm not able to see my request to activate it ... Is there some flag has to be set inorder to see the requests in the activation list? once its activated, I think all i need to do is "UPDATE ODS DATA TO DATAPROVIDER" as it is a standard content. Is there something else i need to do ..Pls guide.
Now, I have a new problem, when i'm trying to see the transfer structure, it doesnt open and i get a msg
Transfer method 'TRFC with PSA' is not supported by the source system
Diagnosis
The PSA transfer method is used to transfer data from source system CRM to transfer structure 0xxx_xx_xx_I_BB. Source system CRM does not support a PSA transfer.
Procedure
Define the PSA in the source system.
Its actually a content one i installed and i didnt do any customizations to it... Shouldnt it work out of box? If no!! how can i define PSA in the source system.
Any help is appreciated.
Mav.

Hi Mave,
Kindly check the following:
1.) Are you sure that the loading process finished successfully in the ODS? Kindly ensure it did.
2.) Have you tried providing a longer <b>Date Range</b> in the <i>Request Display</i> (lower right).
--Jkyle

Report exection problem for one user - not able to see the data.

Hello Friends ,
Need some help . I have got the one ticket from bussniess side about the report execution .
Unfortunately , I am also not having authorisation of that report due to sensible data.
Problem - User is executing the report but some how he is not ABLE TO see the data for one company code Hierachy .
I executed the same report through RSSMQ via his user id , and I got the below message.
All value were selected . Hierachy Authorisation cannot be used.
A displayed hierachy requier a hierachy authorisation .
But when i checked his authorisation , I am able to see that he should have authorisation to all the hireachy .
could you please let me know , how can I check more ?
Regards,

after accessing the report , u go to su53 tcode and check the authorization and u can see what is problem in authorization for the that user and u can send the details to secuity team to rectify the issue ,

Not able to see the result in particular column of BPC report

Dear All,
I have problem in one of the BPC report where I am not able to see the result into one column but rest of the users are able to see the result for same column in same report without any issues.
Generally, I used this report frequently but having such problem from last few days. Excel has created any logs which I need to clear? Please advice.
Request your help to resolve such problem please.
If you need any information, please let me know.
Thank You
Kind Regards
Anukul

Hello Anukul,
In the report what type of data you are trying to check in that column. can you please brief about report.
And also please check the excel cell format (right click and check it is a numeric or character), which may help to resolve this issue.
Regards,
Rajesh.K

Not able to see LDAP dropdown in Infoview XIR 3.1

Similar Messages

Maybe you are looking for