Not able to see logs in SWI1

hi,
i am trying to see the workflow log for my workflows but they are all shown blank.
in SWI1 i enter the task name, date range and execute and i am able to see the worklfow ID list. when i double click one of those id, the next screen that comes up i.e. the workflow log is blank.
i can see the workflow log for another workflow.

Hi,
when i double click one of those id, the next screen that comes up i.e.
the workflow log is blank.
What is the status of the workitem ID on which you double clicked, is it in In Preparation or Started. Try to check in the table SWWWIHEAD is the workitem generated from SE11 txn by passing the same workitem ID for which you are not able to see the log.
Some times in the workflow desgin you can choose whether the step has to appear in the workflow log or not so make sure that this option is not enabled for all the steps defined in the workflow template
1. Goto PFTC Choose Workflow template.
2. Mention the workflow template ID open in display mode , click ok workflow builder button.
3. Double click on the first step of teh workflow and navigate to the tab Details and check in the section Workflow Log Graphical Representation what is the option they have choosen if it is Only in technical workflow log or In all workflow logs, you have to choose In all workflow logs if you want to see it in the next screen as soon as you doucble click.
Regards
Pavan
Edited by: Pavan Bhamidipati on Dec 15, 2011 3:10 AM

Similar Messages

9.3.1- Not able to see more than 1 errors in application.log file

Hi,
In 9.3.1. version, I am not able to see more than 1 errors in application.log file during dataload without rules files.
If anybody has faced this solution, pls let me know the cause.
Thanks
jazz

Hey Jazz,
in the first row add a rule file with no load file change the path to what you want. then insert a new row add your load file here. it should have the path from the previous row in the error file. Then delete the first row and run. I had to do this for a level zero load and was the only thing I could figure out so far

I am not able to see "Edit Mode on" when i log into workspace...

I am not able to see "Edit Mode on" when i log into workspace...through Weblogic user...Oracle BPM 11g

If your trying to put pictures that are on your phone to your computer you import it see link below
http://support.apple.com/kb/HT4083

I have the following problem: i lost my cs6 Adobe Production Premium installer dvds and the serials within the package, after all i logged here into adobe and cant find any product in my profile, so i am not able to see my serials or my installations i ha

i have the following problem: i lost my cs6 Adobe Production Premium installer dvds and the serials within the package, after all i logged here into adobe and cant find any product in my profile, so i am not able to see my serials or my installations i have on my macbookpro. Can you help me to find out where i am registerd?

If your registrations do not show at https://www.adobe.com/account.html you will not get help in an open forum
You MAY get help at Contact Customer Care
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"

After logging in SSO user is not able to see responsiblities

Our EBS is integrated with SSO. On PRD we have once user whose account was locked while logging into SSO. We unlock his account, after that user is able to login but is not able to see responsiblities list. We did on EBs application tier relink using
FND_TOP/patch/115/sql/fndssouu.sql with userid parameter.
with this user was able to see responsiblities Yesterday.
Today morning again the same user is complaining that he is able to login SSO but can not see responsiblities list.
Please help. This is happening on PRD just for one user.

Our EBS is integrated with SSO. On PRD we have once user whose account was locked while logging into SSO. We unlock his account, after that user is able to login but is not able to see responsiblities list. We did on EBs application tier relink using
FND_TOP/patch/115/sql/fndssouu.sql with userid parameter.
with this user was able to see responsiblities Yesterday.
Today morning again the same user is complaining that he is able to login SSO but can not see responsiblities list.Please see old threads for similar disucssion.
https://forums.oracle.com/forums/search.jspa?threadID=&q=Missing+AND+Responsibilities&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Please help. This is happening on PRD just for one user.Please log a SR.
Thanks,
Hussein

Not able to see hierarchial org structure by clicking on Expand this branch

Dear experts,
I am currently using the Online data extraction via sap for Nakisa Integration with SAP Landscape.
I have completed the configuration of Nakisa with the help of configuration guide and administrator guide - After completing administrator steps the org chart is visible - When i navigate to the org structure i can see the org unit under the org structure root that i configured as an administrator in the general settings section.
When i click the + sign ie on expand this branch i am not able to see all teh org units under the displayed branch.
Can you please guide me regarding how one can view the org structure below the selected branch when i click on expand this branch section.
Manager Personnel Id is not maintained for this org unit - Should the user clicking on the expand this branch be the manager of the org unit to see the org structure.
Regards
HKishan

Dear Luke,
I am not able to see that navigation icons within an org chart box - The org unit that is displayed on clicking the orgchart does have branches in SAP but i am not able to see these navigation icons that lead me to these branches.
Is there any specific step that needs to be done to see these branches.
By the way what is the log file you are refering to is it the "PresentationResources.xml " or is it any other log file.
Regards
Hkishan

Not able to see the result in particular column of BPC report

Dear All,
I have problem in one of the BPC report where I am not able to see the result into one column but rest of the users are able to see the result for same column in same report without any issues.
Generally, I used this report frequently but having such problem from last few days. Excel has created any logs which I need to clear? Please advice.
Request your help to resolve such problem please.
If you need any information, please let me know.
Thank You
Kind Regards
Anukul

Hello Anukul,
In the report what type of data you are trying to check in that column. can you please brief about report.
And also please check the excel cell format (right click and check it is a numeric or character), which may help to resolve this issue.
Regards,
Rajesh.K

ITunes musical library located on a WD 2TB, ext. drv. Computer destroyed by virus; ED survived. Bought new laptop, connected ED. Not able to see library. ED shows as 'G:' 95% full. How can I reconnect my old library to new laptop?

I had my iTunes musical library on an ext. drv. WD 2TB, ‘MY BOOK ESSENTIAL'. Three weeks ago, my computer was infected by a virus that fried it. It did not affect the external drive. I bought a new computer: a laptop, Dell XPS, Intel Core i7-2630QM CPU, Windows 7 Home Premium. I have been able to connect the WD external drive; however, I am not able to see the musical library in my iTunes or Explorer. ‘My Computer’ shows the external drive as ‘G:’ 95% full. It reads, 32.1 GB free of 1.36 TB. When I click on the drive to see its contents, it shows nothing. The library in iTunes also shows nothing. Can anyone help, please? How can I reconnect my old musical library to my new laptop and iTunes? Many thanks.

Hmm, viruses don't generally "fry" drives. They can make bootable operating systems not bootable, hide data, and corrupt executable files. Software can potentially wipe all the data from the drive but it shouldn't be able to physically damage the drive. Bah! What's done is done.
As to unhiding your files assuming they are just hidden....
Hit Start > Run, type in CMD and press enter. Type the following at the prompt and then press enter:
attrib -h -s -r g:\*.* /d /s
This tells windows to clear the hidden, read-only, and system flags from all files on the drive, assuming of course your profile has the power to "see" the files and change them.
If that doesn't work then you may need to take ownership of the drive first. The drive may have security settings that make it "belong" to an account on your old system. Right-click on the drive in Windows Explorer and click Properties. Click the Security tab, the Advanced button, the Owner tab, then the Edit tab. Make yourself the owner, then you can make any other changes to the security settings you want to back on the Permissions tab. (If you can't change the owner log out and log back in as Administrator). For iTunes your account (or everyone) and SYSTEM need full access to all files. Any changes you make should be applied to "This folder, subfolders and files", should be inheritable and you should also replace the permissions on all child objects.
tt2

Users not able to see remote users on the node network

Users that belong to one node are not able to see users in another calendar
server node. Both calendar servers are pointing to the same directory server.
Some errors that occur in the log files:
DEXOTEK ERRCODE Ox13608 -> SchedBaseOpen: Section name too long
DEXOTEK ERRCODE Ox13608 -> OpenConnection: SchedBaseOpenOnHost
And when uninode -cws nodeID is run, it does not report being able to see all
the users and resources on the remote nodes.
uninode: connected to hostname.net.xxx.com, node 10000
directory of items: 10 (USERS = 10/RESOURCES = 0)
CONNECTION EX AV Q-SIZE IN-PROCESS IMPORT-DIR
(10000)->xxxxxx.xxx.com(10001) 2 2 0 0 370 (U=370/R=0)
Here is the nodes.ini file:
+ H=xxxxxxx.xxx.com/N=10000
+ H=xxxx.xxx.com/N=10001
all=2
There is a reported bug, that 16 chars is max on domain names for the nodes.ini
file, which means that you need to change that file and use:
     a) an alias that can be resolved on the network with either DNS or local
     host files
     b) use the IP address.
As documented in the release notes, here is the procedure on how to modify the
hostname when it is too long. Or how to modify the hostname for any reason.
Fix for long host names problem
If the fully qualified domain name for your network exceeds 16 characters, it
will be necessary to shorten the host name of all the servers in the Calendar
Server network . These instructions must be carefully followed to avoid causing
problems with the network. Ensure that the procedure is applied to ALL nodes in
the Calendar network.
1) The following procedure should be carried out on each server in the
Calendar network:
a) Bring the Calendar services down.
% unistop -y
b) Run the unidbfix command in export mode.
% unidbfix -export -n node-id
This will create a remotenode.ini file for each node on the server. The file is
located in the node's perm directory.
Example:
If you have two nodes on the server ROCK, node 1(in N1) and node (in N2), the
files are:
/users/unison/db/nodes/N1/perm/remotenode.ini
/users/unison/db/nodes/N2/perm/remotenode.ini
The remotenode.ini file will look something like this:
[1]
RN_NUMCONNECT = 2
RN_SURNAME = "unison"
RN_GIVENNAME = "unison"
RN_ORGUNIT1 = "uni2"
RN_ORGUNIT2 = "openmail"
RN_ORGANIZATION = "ABC Corp"
RN_ACCESSMETHOD = 2
RN_SERVICENAME = "unieng"
RN_HOSTNAME = "rock"
[2]
RN_NUMCONNECT = 2
RN_SURNAME = "unison"
RN_GIVENNAME = "unison"
RN_ORGUNIT1 = "uni4"
RN_ORGUNIT2 = "openmail"
RN_ORGANIZATION = "ABC Corp"
RN_ACCESSMETHOD = 2
RN_SERVICENAME = "unieng"
RN_HOSTNAME = "rock"
2) Once you have run unidbfix in export mode on all the servers, proceed as
follows:
a) Compare the remotenode.ini files and verify that the entries are the
same. In each file, you will note that an entry for the local node is not
included.
b) Edit one of the files (on any of the servers). This file will be
referred to as the master file. Add the appropriate entries for the
local node (copy the section from one of the other files). Modify the
RN_HOSTNAME in each of the sections of the master file to shorten the
name.
c) Copy the master file in the perm directories of each node on all the
servers.
3) Once the master file is in the perm directory of all the nodes, proceed as
follows on each server:
a) Run the unidbfix command in the -import mode.
% unidbfix -import -n node-id
b) Edit the nodes.ini file on the hub server and make the same changes to
the host names. You do not need to apply the changes.
c) Edit the [UTL] section of the /users/unison/misc/unison.ini file and
change the host name.
d) Start up the services.
% unistart
4) After all the changes have been made, run the uninode -cws all and
uninode -snc all commands and verify that the results are accurate.

See this:
http://docs.info.apple.com/article.html?path=Mac/10.6/en/8203.html
You should then see your pcs listed in Finder's sidebar under the shared section.
Regards

After webcatalog migration from 10.1.3.3 to 10.1.3.4.2 not able to see user

Hi Gurus,
I am facing an issue with web catalog migration.
Currently we are on 10.1.3.3 version and upgrading to 10.1.3.4.2.
As part of migration i have taken the RPD, NQSConfig, Web catalog, instanceconfig.xml files as backup. i followed manual way while taking the web catalog backup i.e zipped(tar) the prod catalog and moved it to some folder.
After 10.1.3.4.2 installation i have moved this zip file to the /OracleBIData/web/catalog and unzipped it. restarted all the servers. when we logged in presentation services we are not able to see the reports which we saved in "My Folder" when it comes to the reports which we saved in "Shared Folder" i am able to see all the reports and dashboards.
to debug this further i opened the web catalog by using web catalog manager and found out that all the reports and .atr files are there under that user ( USER folder, corresponding user folder ), and instead of my presentation server recognizing this folder its creatin new folder for the same user.
Because of this issue our release plans are getting postponed, please advise me.
what could be the problem and if i have done some thing wrong while taking the backup pls let me know the best way of backing up the web catalog.
Thanks,
Seshu

try this:
Archive all folders from 10.1.3.3 using catalog manager.
Update instance config on 10.1.3.4.2 so that it'll create a new webcat, open it and unarchive above folders.
If helps pls mark

ODBC connection not able to see all schemas

Hi everyone,
We have noticed an unusual problem that just recently started. In our database, I have created a read-only user - only has the ability to connect to the database, and SELECT ANY TABLE. Then we have some applications (Crystal Reports and Lotus Notes Agents) that use this user to query data. The applications use an ODBC connection, and when we initially set this up, everything worked beautifully.
However, suddenly we have noticed that the ODBC connection is not able to see all of the schemas in the database. We have tested and confirmed this - using either 9.02 ODBC or 10.01, this happens with both of them. I created a couple new ODBC connections, one for each version, then I try to create a new Crystal Report, using this ODBC connection - when I connect using the read-only user, it connects just fine, but when it shows me all of the schemas available, I am only seeing about half of them (and of course not seeing the one that I really need to see).
However, when I use Microsoft Access, and try to import some External Data, and I use the same ODBC connections, then I AM seeing all of the schemas.
Has anyone ever seen anything like this? Any ideas on what I can do to troubleshoot?
Thanks,
Brad

I'm trying to get this issue figured out. Can you
tell me what you mean when you ask me to log in
directly as the same user using ODBC and query
ALL_TABLES - how would I do that?Using whatever Oracle database account you use in Crystal, log in to the database using SQL*Plus (or your favorite GUI like SQL Developer) and run a query like
SELECT owner, table_name
FROM all_tablesDoes that query show all the tables you expect, or are you missing some?
Also, you mention a parameter in the ODBC API that
controls which schemas are returned - is there any
way to see that value?An ODBC trace might show the value, I don't recall if the actual value is written out in the trace. Different front-end tools often have a place that allows you to filter out certain schemas, which is generally done by passing in a parameter to this ODBC API call. I don't know enough about your tools, though, to know where this might be.
Are there any other ODBC drivers I could try?There are plenty of third party ODBC drivers out there, but I would tend to be suprised if the ODBC driver was at fault here. You could also try patching the ODBC driver and/or Oracle client to the most recent patchsets.
Justin

Not able to see the PSA

Dear Experts,
I have enhanced the extract structure of 2lis_13_vdkon in R/3 with 5 fields which are exist in transfer structure.
I have replicated the data source in BI but unfortunately i have not deleted the data in the PSA.
After replication when i try to activate the data source the system is giving Dump and im not able to see the PSA also.
Please help me out.
When i manage on the data source to c PSA, its giving error like this
Invalid DataStore object name 2LIS_13_VDKON_BB: Reason: No valid entry in table RSTS
The Dump when activating the data source is :
Runtime Errors         SAPSQL_ARRAY_INSERT_DUPREC
Exception              CX_SY_OPEN_SQL_DB
Date and Time          03.06.2009 09:46:55
How to correct the error
     Use an ABAP/4 Open SQL array insert only if you are sure that none of
     the records passed already exists in the database.
     If the error occures in a non-modified SAP program, you may be able to
     find an interim solution in an SAP Note.
     If you have access to SAP Notes, carry out a search with the following
     keywords:
     "SAPSQL_ARRAY_INSERT_DUPREC" "CX_SY_OPEN_SQL_DB"
     "CL_RSAR_PSA===================CP" or "CL_RSAR_PSA===================CM006"
     "_UPDATE_DIRECTORY_TABLES"
     If you cannot solve the problem yourself and want to send an error
     notification to SAP, include the following information:
     1. The description of the current problem (short dump)
        To save the description, choose "System->List->Save->Local File
     (Unconverted)".
     2. Corresponding system log
        Display the system log by calling transaction SM21.
        Restrict the time interval to 10 minutes before and five minutes
     after the short dump. Then choose "System->List->Save->Local File
     (Unconverted)".
     3. If the problem occurs in a problem of your own or a modified SAP
     program: The source code of the program
Regards
venu

Hi Venu,
The issue I think is the PSA was not deleted cleanly. If you try and activate the PSA you will get the dump again.
..Probably if you go through the ABAP dump you will notice it is pointing to the following code;-
   75 * Put the fields of PSA to database without check, otherwise error by
   76 * activation of table
   77
   78   IF p_psa_exists EQ rs_c_false OR
   79      i_new_version     EQ rs_c_true.
>>>>>     INSERT rstsodsfield FROM TABLE l_t_odsfield.
   81   ELSE.
   82     DELETE FROM rstsodsfield
   83       WHERE odsname = l_s_odsfield-odsname
   84       AND version = l_s_odsfield-version.
   85     MODIFY rstsodsfield FROM TABLE l_t_odsfield.
Put a breakpoint in the code in line 78. and activate the DS..the program should stop in 78...change the value of variable rc_c_false so that line 82 gets executed. This will clean up the PSA entries in table rstsodsfield. Now activate the DS and delete the PSA entries in the PSA table.
We faced the same issue and resolved it this way.
Thanks
-Saif

Not able to see PSA for the data souce 2lis_13_vdkon after enhaning

Dear Experts,
I have enhanced the extract structure of 2lis_13_vdkon in R/3 with 5 fields which are exist in transfer structure.
I have replicated the data source in BI but unfortunately i have not deleted the data in the PSA.
After replication when i try to activate the data source the system is giving Dump and im not able to see the PSA also.
Please help me out.
When i manage on the data source to c PSA, its giving error like this
Invalid DataStore object name 2LIS_13_VDKON_BB: Reason: No valid entry in table RSTS
The Dump when activating the data source is :
Runtime Errors SAPSQL_ARRAY_INSERT_DUPREC
Exception CX_SY_OPEN_SQL_DB
Date and Time 03.06.2009 09:46:55
How to correct the error
Use an ABAP/4 Open SQL array insert only if you are sure that none of
the records passed already exists in the database.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"SAPSQL_ARRAY_INSERT_DUPREC" "CX_SY_OPEN_SQL_DB"
"CL_RSAR_PSA===================CP" or "CL_RSAR_PSA===================CM006"
"_UPDATE_DIRECTORY_TABLES"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
Regards
venu

Hi Venu,
The issue I think is the PSA was not deleted cleanly. If you try and activate the PSA you will get the dump again.
..Probably if you go through the ABAP dump you will notice it is pointing to the following code;-
   75 * Put the fields of PSA to database without check, otherwise error by
   76 * activation of table
   77
   78   IF p_psa_exists EQ rs_c_false OR
   79      i_new_version     EQ rs_c_true.
>>>>>     INSERT rstsodsfield FROM TABLE l_t_odsfield.
   81   ELSE.
   82     DELETE FROM rstsodsfield
   83       WHERE odsname = l_s_odsfield-odsname
   84       AND version = l_s_odsfield-version.
   85     MODIFY rstsodsfield FROM TABLE l_t_odsfield.
Put a breakpoint in the code in line 78. and activate the DS..the program should stop in 78...change the value of variable rc_c_false so that line 82 gets executed. This will clean up the PSA entries in table rstsodsfield. Now activate the DS and delete the PSA entries in the PSA table.
We faced the same issue and resolved it this way.
Thanks
-Saif

Not able to see backend material document number in SUS

Hi,
A GR is created in ECC. It is avaiable for disply in the supplier's login. We are able to achieve this.
The question is "We are not able to see backend (ECC) material document number anywhere on the screen. We are only able to see the SUS Confirmation number (i.e. as per the number range assigned to BUS2233). Is it standard behavior?
Details: SRM7.0 SP07, ECC Ehp4, Using MM-SUS. Plan driven procurement.
Ganapathi

Dear Manjunath,
Thanks for the response.
We have noticed that, the back end (ECC) material documents are getting replicated to SUS as we are able to see this number in BBP_PD & BBP_PDBEH-BE_OBJECT_ID.
So, let me put the question this way.
Our issue is with display of document in the portal (BSP Pages).
For Example, in case of Invoice, the supplier can see the back end MIRO invoice document number with the "External Reference" Label, under Basic Data section. The case is NOT same with GR. The back end (ECC) material document number is NOT seen any of the layout (for end user, who has logged in as supplier).
Is it standard behavior? If we want that, the suppliers should be able to see the material document number in the portal, when a GR is created in ECC, what settings we have to do?
Ganapathi

Not able to see task of BPM process in UWL

Dear all,
I am not able to see my task in Portal UWL and getting an error in UWL workset saying, an error occured while trying to connect to provider and detail message says - Unexpected error occured: XMLParser: No data allowed here (:main:, row:6, col:2)
In the Portal Log i can see following error message -
process()
[EXCEPTION]
com.sap.engine.interfaces.webservices.runtime.ProtocolExceptionExt: Authentication failed. For details see log entry logID=0021288C0230293F0000000500006EB3 in security log.
at com.sap.engine.services.wssec.srt.protocols.ProviderSecurityProtocol.logThrowable(ProviderSecurityProtocol.java:1178)
at com.sap.engine.services.wssec.srt.protocols.ProviderSecurityProtocol.handleRequest(ProviderSecurityProtocol.java:527)
at com.sap.engine.services.webservices.espbase.server.runtime.ProtocolProcessor.protocolsHandleRequest0(ProtocolProcessor.java:95)
at com.sap.engine.services.webservices.espbase.server.runtime.ProtocolProcessor.protocolsHandleRequest(ProtocolProcessor.java:70)
at com.sap.engine.services.webservices.espbase.server.runtime.RuntimeProcessingEnvironment.preProcess(RuntimeProcessingEnvironment.java:483)
at com.sap.engine.services.webservices.espbase.server.runtime.RuntimeProcessingEnvironment.process(RuntimeProcessingEnvironment.java:322)
at com.sap.engine.services.webservices.runtime.servlet.ServletDispatcherImpl.doPostWOLogging(ServletDispatcherImpl.java:199)
at com.sap.engine.services.webservices.runtime.servlet.ServletDispatcherImpl.doPost(ServletDispatcherImpl.java:65)
at com.sap.engine.services.webservices.servlet.SoapServlet.doPost(SoapServlet.java:61)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:754)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:847)
I am using Portal 7.2 with SP level 08.
Thank and Regards,
M.D.Sahu

Hi Mithileshwar,
Start BPM Process Trigger - Read timed out
Regards,
V Srinivasan

Not able to see logs in SWI1

Similar Messages

Maybe you are looking for