Not able to see material and operation overview as tab in production order

Hello Friends,
While creating the production order by T.C CO01, after giving the material code , production plant and order type, system took me inside it.There i am not able to see component overview, operation overview as tab.Whereas in menu option Goto - overview - component , i can see there.But i want this things as tab in screen where we give qty and dates.
So guys do you know where to do configuration for it.
Thanking you guys in ad

Dear Jitendra,
In Production Order you will find Component and Operation screen under two different icons (not tab) production Header screen.
- For Component Overview it is something like Balance or on pressing F6 you will branch to Component overview Screen.You will find it just after Hat icon
- And for Operation over view it looks like ladder or on pressing F5 you will branch directly to operation screen.you will find this icon just after Component overview Icon.

Similar Messages

  • Gnome panel 3.2 - I am not able to see clock and date well

    Hello all,
    I am using Gnome in fallback -mode. I upgraded my gnome-panel to version 3.2 and after upgrading I am not able to see date and time information well. This information have shown a dark grey color, which is very difficult to see because background is black. If I put my mouse cursor on the time panel I am able to see infromation because background changes from black to white (timebox get activated). Is there any way to change font/foreground colour from grey to white? It is very irritating put mouse cursor on the date everytime when I want to see time.  I tried to downgrade panel back to 3.0 version, but after that I wasn't able to see panel at the all.
    -Br, Marko
    Last edited by tetrao (2011-10-05 15:27:36)

    Looks like I am not a lonely wolf with this problem: https://bugzilla.redhat.com/show_bug.cgi?id=691288
    Maybe I just need to wait next version of gnome-panel
    Strange here isn't anybody others at this site, who have this issue..
    Last edited by tetrao (2011-10-05 15:55:54)

  • Not able to see EO and VO Objects in offline database in jdeveloper

    Hi all,
    We have a offline database. I opened it in database edition mode in jdeveloper , but i can`t see EO, VO and AM OBJECTS(with their specific icons) in the project. Although i am able to see respective XML files.
    What could be the reason?

    EO/VO/AM are not part of offline database mode, they are part of ADF. You need to use studio edition mode.

  • Not able to see "Folder and Report Tasks" section in BI publisher

    Hi Expert,
    I am trying to use BI publisher, after login as Administrator/Administrator, all I can see are two folders: My Folder and Shared Folder. I did not see anywhere I could create new report. Could someone help me?
    Thanks a lot.

    You should have a group called 'XMLP_ADMIN' in your repository and administrator or the user you are using should be part of that group. Look into paint.rpd for all these.

  • Not able to see executions in operator - Reverse engineer problem

    Hi All,
    I´m starting a new project, this is the situation. I've created the agent (physical and logical), it's running as a service (OPMN instance). When I execute the test, "Agent test Successfull". So I guess that is not the problem.
    I'm creating a new model, I've already created the Data server (SQL server), connection test is Ok, I've also created the physical and Logical Schema. The problem is after creating a new model, when I select reverse engineer option, everything looks like that data is being correctly retrieve, however data do not appear in the model. When I go to the operator to check the log, nothing is there. Any idea?
    Thanks in advance,
    Gonzalo.-

    >
    The problem is after creating a new model, when I select reverse engineer option, everything looks like that data is being correctly retrieve, however data do not appear in the model. When I go to the operator to check the log, nothing is there. Any idea?
    >
    Do you mean to to say that uou are not finding any infor about the reverse engineering process in Operator ?
    If yes then please note Standard reverse engineering does not list down the operation performed in Operator.
    If you are using some RKM then only it will display the steps performed in Operator

  • HT6023 I am not able to see Inspect and other tabs. I have recently bought my Mac Book Air and updated it to OS X Mavericks and have latest iMovie 10.0.1.

    I am not seeing the band in between the Library and Project that has Play button and other command buttons. When I go to IMovie and Preferances, I see the
    only options as follows "Clip: Apply Slow motion automatically" and Theater : Automatically upload content to icloud. But various forum discussions mention that this should open up options for browser tab, inspector tab etc. I looked at other menu's and I do not find anything. Can somebody help solve this.

    After repeated search, I found my answer. I have both iMovie App on my Mac. Sadly they don't share the library or events. I liked the version 9 having inspect tab and others where you could manually enter many values which in version 10 takes hec of playing around with your mouse.
    For example, In version 10 you have hold the mouse or trackpad to adjust the % of sound of strip and still may not get to desired value. In version 9, you can bring up a window for adjusting audio and enter the values directly. This is user friendly.
    I guess, I have to live with two versions for a while. App store does no longer haver version 9. Hope any new updates to OS wont automatically delete version 9.

  • I'm not able to see all the tabs words on itunes window. I think I uninstall the font on my system. How I can know wich fonts Itunes uses for install it?

    I think I uninstall the font on my system. How I can know wich fonts Itunes uses for install it?
    I'm using Win Vista 64b - but I try already to install all my fot library but nothing happen,, still not able to see some menu's from lists, tabs titles, etc.
    I search through itune's web site and not sign of info about how can I fix this problem...
    help!

    It has something to do with Segoe fonts in your system.
    Refer this link for solution
    iTunes 10.1 Missing Text

  • After installing GRC 5.3-SPM-Not able to see all features in configuration

    Hello Experts,
    We have installed GRC-5.3 Superuser Privilege Management in JAVA standalone system and when we trying to configure we are not able to see the all features in configuration tab.
    We have created a user and assigned all roles starting with FF then tried login to
    http://<hostname>:<port>/webdynpro/dispatcher/sap.com/grc~ffappcomp/Firefighter
    I can able to login successfully and when I go into configuration tab I cannot see all features, Could you please help me out.
    Thanks & Regards,
    Nagaraju

    Dear Nagaraju,
    You may be seeing only one "Connectors" in configuration tab in SPM. If it is so, then you are not missing anything here. It is the only configuration we need to do in SPM at java side.
    If it is not showing, that means you have missed some action to assign FireFIghter Role in SPM. Check it out.
    Regards,
    Sabita Das

  • Complaint - Structured Product - Not able to see the componentitem details.

    Hi.
    <b>First Question:</b>
    I have a Structured Product (For eg. a Structured Producted is called Desktop Computer. It has two items say Monitor, Mouse.) In my complaint transaction, when I add this product, I dont see the components within it which are associated in the SAP GUI.
    Note: In the Item Category determination for the header product, I have chosen the option 'Single Level explosion of structured products'.
    But still I am not able to see the items when I add this Structured product to the complaint transaction. Can anybody throw any light as to what could be missing ?
    <b>Second Question:</b>
    Will the component items be visible in the ICSS. I am only seeing the product header  but not seeing the items within it. What could be mising here ?

    Hi,
    For marketing there is a standard Busines rolle MARKETINGPRO with
    PFCG Rolle  SAP_CRM_UIU_MKT_PROFESSIONAL. Please check whether it is also valid for
    Utilities.
    I dont see any Marketing workcenters and Links in the "SAP_CRM_UIU_UTIL_IC_LEAN_AGENT" Rolles.
    Regards,
    Usman

  • Not able to see ikm oracle incremental update and ikm oracle slowly changing dimensions under PHYSCIAL tab in odi 12c

    not able to see ikm oracle incremental update and ikm oracle slowly changing dimensions under PHYSCIAL tab in odi 12c
    But i'm able to see other IKM's please help me, how can i see them

    Nope, It has not been altered.
    COMPONENT NAME: LKM Oracle to Oracle (datapump)
    COMPONENT VERSION: 11.1.2.3
    AUTHOR: Oracle
    COMPATIBILITY: ODI 11.1.2 and above
    Description:
    - Loading Knowledge Module
    - Loads data from an Oracle Server to an Oracle Server using external tables in the datapump format.
    - This module is recommended when developing interfaces between two Oracle servers when DBLINK is not an option.
    - An External table definition is created on the source and target servers.
    - When using this module on a journalized source table, the Journaling table is first updated to flag the records consumed and then cleaned from these records at the end of the interface.

  • Apple TV and iTunes not able to see each other

    I think I have found a bug in either iTunes or Apple TV. My network configuration is a bit complicated so I will describe it first.
    Cable modem into my house hitting a Linksys WRT330N router at a central box in my laundry room. From there my house is hard wired to different rooms of the house. One goes to my office where I have a Apple Extreme N airport, connected to my PowerMac and my iTunes library. Again out of the central point in the laundry room again hard wired I have a wire going to my living room, where I have another Apple Extreme N airport, this is where my Apple TV is hard wired too. I have all the latest firmware and software installed on all my devices. Also both Airport Extreme's are setup using bridge mode and letting the Linksys serve the IP addresses for my network.
    Now to the problem. I can not explain when or why but my Apple TV and iTunes are not able to see each other after about 48 hours. I have tried all kinds of troubleshooting steps including changing my connection from being hard wired to wireless connecting directly to the Airport Extreme my iTunes computer is connected too. I know my network connection is good as I can see trailers and pull up video's from uTube.
    The only way to get them to see each other again is to do a factory reset of my Apple TV. After I do this they can both see each other again. But again after about 48 hours they lose the ability to see each other. I have taken these steps twice now to fix the problem
    I just finished reseting my Apple TV and am going to watch it to see when it stops working the next time.
    All of these problems started the other day when I introduced a new Apple Extreme N router in my my network. The airport Extreme seem to be working fine with my PS3 and XBox 360 that is also connected to it. So I don't think it's the router that is causing the problem.
    If I had to guess I would say something in the Apple TV is locking up. Although I have tried power cycling the Apple TV which does not fix the problem. I'm going through 3 routers to get between the Apple TV and the iTunes library somehow it appears the Apple TV is losing it way.
    I welcome any help as I don't want to have to keep factory resetting my Apple TV to keep it working.

    Fascinating just reading about your setup. I have a WRT350N and have noticed that it will drop its speed, sometimes down to 1Mbps. It seems to do so at about the same time every day, but usually comes back to speed in about 5 minutes. In my experience, the Apple TV will disconnect if the speed falls this low. Try monitoring the Linksys with Netstumbler, Vistumbler, or just in the Windows Network utility.
    Check the "lease obtained" and "lease expired" times for your router to see if that is when the network fails. I've just finished reading an angry thread over at the Linksys forum about the WRT330N where someone mentioned that the router wasn't renewing its lease.
    "I cannot set it run off automatic DHCP from the WRT330N, the router will not assign it an IP every time the lease expires, causing me to have to manually set an IP on the Print server. That's annoying. Having the router drop IP's to individual machines after 12-48 hours...very annoying."
    http://forums.linksys.com/linksys/board/message?board.id=Wireless_Routers&thread .id=67412
    If that is the problem, then I would consider setting up a Static IP address for your Apple TV. You can do that through the user interface -> Settings -> Network -> Configure ... (Quite intuitive as you only have change IP address and the subsequent details remain the same.)
    My router assigns IP Addresses in the ranges of 192.168.1.100 ->149. The idea here is to choose an address outside of that range but is not greater than 192.168.1.253 (and should not end in the number 1). You shouldn't have to change the linksys router as long as 50 clients are assigned in that range. You'll have to figure that out by accessing your router webpage at browser address 192.168.1.1 -> the default password is "admin" (without the quotes).
    Good luck.

  • Not able to see the crystal reports XI version in the IE 7 and IE 8

    Hi Team,
    I am using web based application developed in VB,ASP,SQL SERVER,Crystal Reports(XI). I am able to see the Crystal Reports in IE 6. But i am not able to see the reports in IE 7 and IE 8. While clicking on the reports button it is showing the  red X image top left cornor.
    I am using CrystalActiveX viewer11 version for viewing the reports.
    In IE 6,if the client using fiirst time for vieiwing the reports,it will ask the Activexviewer control prompt and says ok,it will display the reports.
    Thanks and Regards
    Eshwar

    Thanks your advise.But we are using following crystal reports (XI) version and we don't have CRXI with R1 and R2.
    CurrentVersion:11.0.0.895 ( CR Developer and Product Type:Full)
    Crystal Reportviewer11 configured in the IIS which is version (5.0). and configured the virtual folder to C:\Program Files\Common Files\Business Objects\3.0\crystalreportviewers11\.
    Our web application code also configured in the IIS at same level.
    When the user wants to see the reports through the application,it will ask the Plugin of Crystal Report Viewer and user will download this plugin and it will save in the IE plug ins.It will ask only first time viewing the reports for the next onwards it will not ask or prompt of the Activex control.
    So please suggest me, is there any upgrade version of this Crystal Reportviewer11 needs to be installed or any browser setting need to be configured for IE 7 and IE 8.
    waiting for your reply.
    Regards
    Eshwar

  • I'm using Iphone 5 .After updating it with the latest software i.e iOS 7.0.6 I'm not able to see the wats app and imsg on my notification until and unless i activate the "Show on Lock Screen" which was not same as in the earlier software version.Help plz

    I'm using Iphone 5 .After updating it with the latest software i.e iOS 7.0.6 I'm not able to see the wats app and imsg on my notification center when my phone is locked until and unless i activate the "Show on Lock Screen" under each application. which was not same as in the earlier software version.I dnt want my messages or watsapp msges to be displayed on home screen when locked but should be displayed on the notification center on lock condition.
    Please suggest a solution or @Apple please get a software release which can remove this bug .

    We aren't Apple, just users like you. Have you tried a reset? Hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss)

  • My firefox webpage now opens up as a whole page and I am not able to see any any menu bars

    All of a sudden my firefox webpage now opens in the whole window and I am not able to see any menu bars in the top or the "start" icon in the bottom of the screen

    Toggle Full Screen mode on/off with F11 -- very useful keyboard shortcut.
    References:
    * http://dmcritchie.mvps.org/firefox/keyboard.htm
    * http://kb.mozillazine.org/Resizing_oversize_window
    * http://kb.mozillazine.org/Resizing_oversize_window
    <br><small>Please mark "Solved" one answer that will best help others with a similar problem -- hope this was it.</small>

  • I am not able to see toolbars, when I open a new window that window is not visible, if I open from bookmarks and there is music playing I hear it but canNOT SEE the websites.

    I am not able to see toolbars, when I open a new window that window is not visible, if I open from bookmarks and there is music playing I hear it but canNOT SEE the websites. I was able to get window open from the help "window" and open sites from there just not from new: window tab or bookmarks those stay invisible? I tried the help suggestions, safemode,etc.

    Hi CMorenoOT,
    This prompt is usually displayed when your Apple ID needs to be configured for the iTunes Store. You'll want to run through the additional steps to setup your country, and payment information.
    iTunes: How to set up an Apple ID within iTunes
    http://support.apple.com/kb/HT2731
    Tip: If you are trying to create an account using an existing Apple ID, like your iCloud email address, you will receive a prompt telling you that your email address is already an Apple ID. Simply tap Continue, and then tap Use Existing Account on the following screen.
    - Next, you'll be required to enter your billing information. To choose a different Credit Card type, tap one of the available options, and then tap Done. You will not be charged until you make a purchase.
    - Once you've filled out all of the fields for your billing information, tap Next.
    For more information:
    Using an existing Apple ID with the iTunes Store and Mac App Store
    http://support.apple.com/kb/HT2589
    Thanks,
    Matt M.

Maybe you are looking for