Not able to see motion in test movie.

HI guys , I have just added a simple motion ( rotating word in additional frame ) the thing is that is comes to a point when it vanishes from the movie completely.The motion is not corrupted and I can see all the rotation when put "show redrawn regions " only. What's wrong ? Regards.
The motion is in Actionscript 3.0 ( Flash CS3) .

If the textfield is set as a dynamic textfield, try embedding the font in the textfield. If it doesn't need to be a dynamic textfield, change it to a static textfield.

Similar Messages

Not able to see the documented goods movement

Hi ,
The Problem is I cannot see the documents against the same combination of the order type and Plant for Ceratin period but can see the documented goods movements against the same orders for some other period.

Hi,
Check in OPL8, whether the Documented Goods Movemets is maintained or not.
This in the Second Tab page: Implementation.
Revert for further discussion..
Regards,
Siva

Not able to see Data in Xcelsius 2008

Hi everyone,
My question is I am not able to see data in Xcelsius spreadsheet although I am able to connect to SAP BW and also able to see and select query but when I select Cross Tab Data in output Values it is not displaying in Xcelsius spreadsheet
System Info
Xcelsius 2008 Enterprise Trial Version SP 3.0
SAP BW 7.1 SP 6 ABAP and JAVA
Any help would be appreciated

Hi Rashid,
When you are using the BW conenction in Xcelsius you will not see any data in the spreadsheet at design time or at preview time.
To see the data you need to go SAP > Publish, then SAP > Launch to test the dashboard in the NetWeaver Portal as that is the only place where the data can be viewed.
Regards
Matt

When I go to create a new project in imovie using the iPhone 5, I am not able to see any of my video clips or photos that are saved on the device.

When I go to create a new project in imovie using the iPhone 5, I am not able to see any of my video clips or photos that are saved on the device.

When you move or copy the compound clips with their events into an external drive all the events should be there. Not clear on why you want to move them into a single event. You can drag and drop from one event to another.
Why are you using compound clips? You can simply copy the project from each machine with used media onto the external drive and that should do it.

ODBC connection not able to see all schemas

Hi everyone,
We have noticed an unusual problem that just recently started. In our database, I have created a read-only user - only has the ability to connect to the database, and SELECT ANY TABLE. Then we have some applications (Crystal Reports and Lotus Notes Agents) that use this user to query data. The applications use an ODBC connection, and when we initially set this up, everything worked beautifully.
However, suddenly we have noticed that the ODBC connection is not able to see all of the schemas in the database. We have tested and confirmed this - using either 9.02 ODBC or 10.01, this happens with both of them. I created a couple new ODBC connections, one for each version, then I try to create a new Crystal Report, using this ODBC connection - when I connect using the read-only user, it connects just fine, but when it shows me all of the schemas available, I am only seeing about half of them (and of course not seeing the one that I really need to see).
However, when I use Microsoft Access, and try to import some External Data, and I use the same ODBC connections, then I AM seeing all of the schemas.
Has anyone ever seen anything like this? Any ideas on what I can do to troubleshoot?
Thanks,
Brad

I'm trying to get this issue figured out. Can you
tell me what you mean when you ask me to log in
directly as the same user using ODBC and query
ALL_TABLES - how would I do that?Using whatever Oracle database account you use in Crystal, log in to the database using SQL*Plus (or your favorite GUI like SQL Developer) and run a query like
SELECT owner, table_name
FROM all_tablesDoes that query show all the tables you expect, or are you missing some?
Also, you mention a parameter in the ODBC API that
controls which schemas are returned - is there any
way to see that value?An ODBC trace might show the value, I don't recall if the actual value is written out in the trace. Different front-end tools often have a place that allows you to filter out certain schemas, which is generally done by passing in a parameter to this ODBC API call. I don't know enough about your tools, though, to know where this might be.
Are there any other ODBC drivers I could try?There are plenty of third party ODBC drivers out there, but I would tend to be suprised if the ODBC driver was at fault here. You could also try patching the ODBC driver and/or Oracle client to the most recent patchsets.
Justin

Not able to run boot halt test on my Solaris vm

Hi,
I want to run boot halt test for continuous 12hours on Solaris-11-express vm and I am using the below script to do so ,
#!/bin/sh
at -f /boot_halt_test.sh now +5 minutes
reboot
#EOF
The problem here is when I run this shell script for the first time the vm goes under reboot, but later it does not reboot.
And here I have enabled root login, so this should'n be a problem i guess. When I check the services i am not able to see ATD and crond online or offline.
But at and cron commands are found.
What is the alternative for chkconfig in unix.
Edited by: 817795 on Dec 14, 2010 1:48 AM
Edited by: 817795 on Dec 14, 2010 1:50 AM

ok...but why the boot halt script not running again after first time.
Why this script not making entry in "at".
Do I need to install extra packages for this.
Also how to install cron package.
pkg install cron..??
Please help.
I cant see both the services CROND and ATD running
Also please mention where to change run levels in solaris 11
Edited by: 817795 on Dec 15, 2010 4:09 AM

Not able to see the Business systems

Dear Experts,
Thanks for you support and help.
I have created as per the below sequence for both sender and receiver types wherever necessary
1. Software Product
2. Software Component -
3.Technical System - (Third party )
4. Business system (Sender and Receiver)
http://wiki.sdn.sap.com/wiki/display/XI/CopyofFLATFILETOFLATFILE
imported the software compnent in IR and created Data Types, Message types etc and tested, it is working good.
I have created a Configuration Scenario, and tried to assign the business system in "Service Without Party", i was not able to see both the sender and receiver Business Systems which were already created and getting an error : service :Business systems not found
Do i need to change anything while creating Product, SW Component, Third Party Technical System and Busniess System..etc
Regards
Blue

Hi,
I think u r bussiness system is alredy assign to other scenario.If u assigned once it will not show in the list.U have to import the bussiness system not assign.In ID select 'Objects' it will show all the Bussiness system details.Selet u r business system and add to u r scenario.
Also refesh cache objects using SXI_CACHE and refesh obeject in ID.
In ID Go to ENVIRONMENT->select Clear SLD Cache
Then refresh the all objects.
Thanks
Ravi

EAM Controller is not able to see FFLOGs in Reports & analytics tab

Hello Team,
We have recently configured GRC 10.1. Currently we are testing the configuration and We have observed that EAM Controller is not able to see FFLOGs in Reports & analytics tab but administrater is able to view the logs.
Has anyone faced thiss issue earlier. Please help me to get it resolved.
Thanks,
VIJEI

Hi Ameet,
Thanks for quick reply.
I have assigned the custom roles of below SAP standard roles to EAM Controler ID
SAP_GRAC_BASE
SAP_GRAC_NWBC
SAP_GRAC_SUPER_USER_MGMT_CNTLR
SAP_GRC_FN_BASE
SAP_GRC_FN_BUSINESS_USER
Please let me know do i need to add any other roles or add Auth object to the roles.
Thanks,
Vijei

Not able to see tables while creating an EOo

While I am trying to create and EO I am not able to see any table.
I have tested my connection its working fine

Did you checked the checkboxes given under Database Schema in EO Creation screen:
Tables, Views, Synonyms and snapshots.
Thanks
--Anil

Could not able to see Subcontracting PO in ME2O requirement list.

Dear Experts,
I have a subcontracting PO with Account assiged to the Project. I know as we can not use the 541 O Movement type to provide the components to the to the Sub contracting vendor when the PO is account assined to the Project. But my requirement is only to see My subcontracting PO (Account assigned to Project) in ME2O requirement list. Based on the requirement list I will transfer my stock to vendor sloc with 311q Movt type.
I have created the PO but could not able to see in ME2O, is anything I have missed to maintain in config or in some othe rplace.
Regards,
Cherry K

Hi Cherryk,
In case of subcontracting PO with account assignment for Project, components are directly withdrawn from the project stock at the time of the goods receipt. But if you want to withdraw the components from the stock of material provided to vendor then you can set the collective requirement field in Material Master MRP4 view as Collective requirements only (2), then you can use ME2O.
The collective requirement field has to be set for the components to be provided.
Regards
Chandra Shekhar
Edited by: Chandra Shekhar Singh on Jun 2, 2011 10:05 PM

Not able to see iby_fd_extract_ext_pub custom tags of in XML data

Hi Experts,
I have customized the iby_fd_extract_ext_pub package to add the custom tags in the payment format xml data.Package status is valid but I am not able to see any of the custom element in the XML Data.
Please share your experience if you faced similar issue.
Regards,
Brajesh

1. Do not prefix it just put your code in and compile - unless you want to call XX_IBY_FD_EXTRACT_EXT_PUB from IBY_FD_EXTRACT_EXT_PUB to have minimal impact to IBY_FD_EXTRACT_EXT_PUB.
2. You won't be able to put in an additional parameter, you'll need to derive the Payment Process Profile from SQL by linking from payment document to payment process to payment process profile; or just get the org from, say, the first invoice in the batch - as long as you always group by organization this will be fine.
3. Yes, it is probably that a patch will overwrite your customization - make sure you test it after each IBY patch - use applcust.txt and make sure your DBA's check adpatch logs for the file being overwritten!
Regards,
Gareth
http://garethroberts.blogspot.com
http://www.virtuate.com

Not able to see output

Dear all,
In the following procedure, i am not able to see output, if i done this by hardcoding values then working fine. while testing i got the error is :"no data found"
could anyone help me to overcome this problem. iam using 11g.
create or replace Procedure SP_GET
p_CompanyCode IN VARCHAR2,
p_PolicyNo IN VARCHAR2,
p_resultset OUT TYPES.cursortype
AS
AgentNo VARCHAR2(9);
Clientno VARCHAR2(10);
Agentname CHAR(60);
begin
OPEN p_resultset FOR
SELECT MWAGTN into AgentNo FROM ext_lsp_CASMWAGT WHERE MWCO = '''|||p_CompanyCode|||''' And
MWPOLN = '''|||p_PolicyNo|||''' and
Exists (SELECT MCCSTA FROM ext_LSP_CASCNTRM WHERE MCCO= '''|||p_CompanyCode|||''' And MCCNTR = '''|||p_PolicyNo|||''');
IF AgentNo IS NOT NULL THEN
SELECT CRCLTN into Clientno FROM ext_lsp_CMSUSREL
WHERE CRCO= '''|||p_CompanyCode|||''' And CRALPH = 'AGT' And CRCTL1 = AgentNo;
END IF;
SELECT CMNAME into Agentname FROM ext_lsp_CMSCLNTM WHERE CMCLTN = Clientno ;
dbms_output.put_line(AgentNo||Agentname||Clientno);
end;

Your procedure looks completely incorrect. It has lot of unnecessory code in it. Tell us what is your objective. What do you want SP_GET to do.
OPEN p_resultset FOR
SELECT MWAGTN into AgentNo FROM ext_lsp_CASMWAGT WHERE MWCO = '''|||p_CompanyCode|||''' And You are opening a cursor and at the same time you are selecting the value into a variable. That is wrong. And you don't have to enclose variables with single quotes in the where clause.
All the SELECT statement in your procedure can be combined into a single statement like this
select a.mwagtn as agentno
     , c.crcltn as clientno
     , d.cmname as agentname
from ext_lsp_casmwagt a
join ext_lsp_cascntrm b
    on a.mwco   = b.mcco
   and a.mwpoln = b.mccntr
left
join ext_lsp_cmsusrel c
    on c.crctl1 = a.mwagtn
   and c.crco   = a.mwco
   and c.cralph = 'AGT'
join ext_lsp_cmsclntm d
    on d.cmcltn = c.crcltn
where mwco   = p_companycode
   and mwpoln = p_policyno;

Not able to see the TPZ files

Hi,
Please help.
I am facing a problem while transporting a request to Production environment. I am using File Level Transport. When I create a transport file, it is successfully created in development system's /export location. Basis team moves the file production system's /import directory.
But here I am not able to see the imported tpzfile via Tool->import design objects , in Production environment.

Hi,
Please find below from sap help.
After a successful import, the Integration Builder moves the imported TPZ files into the directory <systemDir>/xi/repository_server/importedFiles. The support package stack of imported software component versions is displayed on the Details tab page for the relevant software component version in the Integration Builder. If an error occurs, this information is important for support. Take one of the following precautions to retain the overview of the imported XI content:
● If the release and the support package stack are clear from the file name of the TPZ file, simply leave the files in the directory importedFiles (see above).
If a file with the same file name already exists in the directory importedFiles, the Integration Builder adds the date and time of the import to the file name of the imported export file. This enables you to check which file was imported last.
● After a successful import, you can keep the packed files, from whose naming convention you can derive the support package stack. Move them into the directory importedFiles, for example.
If version conflicts occur during the import, you can process and resolve them in the Enterprise Services Builder. In the case of corrupt export objects, you can force the import and skip objects that cannot be imported. The import is then incomplete and references to objects that are not imported are lost.
Regards,
Venkata S Pagolu

SECATT - Not able to see the screen shots

Hi All,
I am trying to execute the SECATT for one of the testing of HR, but I am not able to see any of the screen shots in downloaded folder.
While executing the test script I had selected the check boxes
1) Save Screen shots
2) Before User Inputs
3) After user Inputs
I am able to see the folder created after each executiion of the test script, but not able to see the screen shots in any format (like some of the blogs mention that screen shots will be in JPEG or in BMP format).
We are on ECC6.0 EHP7 and we are using the sap GUI 730.
Kindly Suggest.
Regards,
Umesh Chaudhari.

Hi Umesh,
I suspect that one of the below mentioned option is the reason for not getting the screen shots.
1. It could be something to do with the SP level that you have.
2. It could be because of a different path mentioned in Screenshot Path (default or user specific).
3. The default path for the file containing the external variants is specified in the user-specific settings.
Procedure
1. From the menu in eCATT or the ABAP Workbench (transaction SE80), choose Utilities → Settings.
2. On the eCATT tab, choose the relevant tab and make the required changes.
Path for Screenshots
You can specify the default path for screenshots taken during the replay of SAPGUI commands.
Regards,
PB

Not able to see marquee tag in javamail

I am using content type as "text/html", but when we send mail <marquee> tag gets dropped , not able to see the effect.
I am using this part of the code :
msg.setDataHandler(new DataHandler(
new ByteArrayDataSource(sb.toString(), contentType)));
where contentType is "text/html"
Multipart multipart = new MimeMultipart();
multipart.addBodyPart(messageBodyPart);
msg.setContent(multipart);
String fromAddress = getProperty("email.fromaddress");
InternetAddress FROM = new InternetAddress(fromAddress);
msg.setFrom(FROM);
InternetAddress[] addressto = {new InternetAddress(toEmailAddress)};
msg.setRecipients(Message.RecipientType.TO, addressto);
msg.setSubject("Test");
Transport.send(msg);
Please let me know changes required to have <marquee> working

You mean, when you display that message in some (unnamed) e-mail client, it doesn't display the <marquee> tag the way a browser might?
I don't find that surprising, given that it isn't standard HTML. But in any case you are complaining about a feature of that unnamed e-mail client. You could ask the people who wrote that client to implement the <marquee> tag if you liked. No doubt that would amuse them greatly, but I doubt they would do it.

Not able to see motion in test movie.

Similar Messages

Maybe you are looking for