Not able to see recorded videos on Nokia 8mp 86

Not able to see recorded vidoes on nokia phone 8 mp 86. Wherea as i can see them on picass or adobe .
Tried all settings.
Kinldy help out.
Regards
Pallavi

Can you play 'em using the real player of your phone?

Similar Messages

  • Why am i not able to see any video on Flex Mobile project on tablet

    I am using the strobe media playback in my flex mobile application. I am able to play audio but no video is visible, if i double tap to change to full screen i can see a brief flash of the video then it gets dark again. i am streaming a mp4 file over http. The video displays properly in the emulator but not on my tablet. Can the video encoding have anything to do with it?
    I have the rendermode set to "direct" in the app.xml, my project is based on a ViewNavigatorApplication.

    Safari 5.0.1 or later: Slow or partial webpage loading, or webpage cannot be found

  • Not able to see video in facetime or any other video chat tool

    I just bought a macbook pro(2011)... When ever I try to use facetime, I am not able to view the video of person in chat/conference... Though they are able to view my video...
    This happens with google video (embedded in google chat) as well...
    Any help? Thanks in advance...
    I have tried after a software update as well...
    Message was edited by: samkumar

    You may have checked the Filter Check Box next to the Qualified Lookup cell in Data Manager, when the current table is the Main Table.
    You use the Filter Checkbox to limit the qualified table records by the current search selections.
    Secondly, you have see if there are any Qualified Links to the main table record you are viewing.
    If not, create the Qualified links in Data manager, for the main table record and the Qualified Table Record.
    Once this is done, you will see the Display fields of the Qualified table for which the links exists for the given main table record.
    Message was edited by:
            Adhappan Thiagarajan

  • When I go to create a new project in imovie using the iPhone 5, I am not able to see any of my video clips or photos that are saved on the device.

    When I go to create a new project in imovie using the iPhone 5, I am not able to see any of my video clips or photos that are saved on the device.

    When you move or copy the compound clips with their events into an external drive all the events should be there. Not clear on why you want to move them into a single event. You can drag and drop from one event to another.
    Why are you using compound clips? You can simply copy the project from each machine with used media onto the external drive and that should do it.

  • Not able to see No of BP records in a profile when I click on Count button

    Hi All,
    We are working on CRM 5.0, BP segmentation.
    We have created a Attribute list which is the combination of Infoset and Attribute Set.
    Now we want to build the profile in Segment builder by using Attribute list.
    I created a profile ( using the filters of attribute set and Info set) I am not able to see the BP records when I click on count button by selecting the corresponding profile.
    But When I have created defferent profiles by using the filters of attribute set and info set  seperately I am able to see the no.of BP records when I click on Count button for the corresponding profile.
    Can anybody advice me what is the reson for that?
    and I want to see the No.of BP records for the profile which is build with the combination of attribute set and Info set.
    Thanks in advance.
    -Madhu.

    Hi sachin,
    I am extremely sorry to keep this thread as open. This problem is already solved.
    I have used table views in infoset to get the data which is coming from multiple tables.
    Regards,
    Madhu.

  • Not able to see all the records thru RSA3.

    Hello All,
    I am checking 0VALUATION_TEXT extractor on R/3 using RSA3 Tcode.
    It is showing only 3 records.
    When I am loading this Text Master data through InfoPackage, the records were loaded from R/3 to PSA itself is 6.
    Why I am not able to see all the records in RSA3.
    Kindly Help me out in this.
    Thanks,
    Geetha

    Hi Geetha,
    Check the data, It seems loded data was 3 records for 2 languages.
    In RSA3 it is showing 3 records for EN language.
    Assign points if it helps...
    Regards,
    ARK

  • Not able to see the records in master data

    Hi friends
    My requirement needs the data to be loaded from a RDM table.I created a data source in the R/3 and by using the extracto checker i am able to see the data.I created the info packages one for Attr and other Txt,replicated the datasource and loaded the data.I am able to see the data in the PSA and when i go into monitor in the infopackage it says the data has been loaded and it shows no errors.But I am not able to see this data in the master data info object.Can anyone please help me out???
    Mouli

    Hi
    Check out your infopackage setting: if its upto PSA or to MD table also
    Open Master data table in SE11 and check the OBJVERS field wether the MD is activated or not!
    Regards
    GSK

  • Not able to see data in the qualifier table of the main tbl , Data Manager

    Hi,
    I have an issue of not able to see the data of two qualified table after populating them.
    It is in mdm-5.5 ps4.
    When populating data first time ,it shows up in those two table slots in the right side of the Data Manager.
    However subsequently it does not show up in those slots , only by right click on the table and selecting "View/edit", the window pops up where those data shows up.
    However unlike other qualified tables the data does not showup automatically for these two tables.
    Appreciate any suggestion or feedback on this.
    regards,
    -reo

    You may have checked the Filter Check Box next to the Qualified Lookup cell in Data Manager, when the current table is the Main Table.
    You use the Filter Checkbox to limit the qualified table records by the current search selections.
    Secondly, you have see if there are any Qualified Links to the main table record you are viewing.
    If not, create the Qualified links in Data manager, for the main table record and the Qualified Table Record.
    Once this is done, you will see the Display fields of the Qualified table for which the links exists for the given main table record.
    Message was edited by:
            Adhappan Thiagarajan

  • Not able to watch .mp4 videos in Quick Time Player

    Hi,
    I have a GOPro camera where the videos are currently stored on an external hard drive. I wanted to import those videos to iPhoto, which didn't work. Then I tried importing them without using iPhoto, but when trying to watch them I get a message saying that "Quick Time Player is not able to open the video.
    I find this very strange, as I already have some GoPro videos in IPhoto, which I can view just fine (in iPhoto, and outside of iPhoto). The videos are shot using the same camera.
    Also; Quick Time Player is supposed to support mp4. format; so I really don't see where I did go wrong?

    What format is used on the external drive?
    I suspect it's the reason the files can't be played.

  • Not able to see ikm oracle incremental update and ikm oracle slowly changing dimensions under PHYSCIAL tab in odi 12c

    not able to see ikm oracle incremental update and ikm oracle slowly changing dimensions under PHYSCIAL tab in odi 12c
    But i'm able to see other IKM's please help me, how can i see them

    Nope, It has not been altered.
    COMPONENT NAME: LKM Oracle to Oracle (datapump)
    COMPONENT VERSION: 11.1.2.3
    AUTHOR: Oracle
    COMPATIBILITY: ODI 11.1.2 and above
    Description:
    - Loading Knowledge Module
    - Loads data from an Oracle Server to an Oracle Server using external tables in the datapump format.
    - This module is recommended when developing interfaces between two Oracle servers when DBLINK is not an option.
    - An External table definition is created on the source and target servers.
    - When using this module on a journalized source table, the Journaling table is first updated to flag the records consumed and then cleaned from these records at the end of the interface.

  • Except sadmin other users not able to see siebel BI publisher reports

    Hi,
    we have integrated siebel with BI publisher, except sadmin other users not able to see BI publisher reports, it is throwing error "No file has been attached to this record, please attach a file. SBL-SVC-00155".
    when login with sadmin report is generating. we have created user sadmin on BI publisher. if we change that user sadmin on BI publisher to some other name, then sadmin not able to generate reports. is there any specific on user creation on BIP should match with siebel?
    Thanks,
    Joe

    i suggest then dropping user and re-creating and then re-assigning permission (just keep his webcat files) - it'll be faster than looking into individual permissions
    another possible option - did you check his browser? sometimes the screen resolution can be too low and they don't see it on the same screen - need to scroll.
    is it possible he's not using the same Dashboard page as others? just check the "Report Links" to make sure
    i'm not sure what else could be a cause of this

  • Apple TV and iTunes not able to see each other

    I think I have found a bug in either iTunes or Apple TV. My network configuration is a bit complicated so I will describe it first.
    Cable modem into my house hitting a Linksys WRT330N router at a central box in my laundry room. From there my house is hard wired to different rooms of the house. One goes to my office where I have a Apple Extreme N airport, connected to my PowerMac and my iTunes library. Again out of the central point in the laundry room again hard wired I have a wire going to my living room, where I have another Apple Extreme N airport, this is where my Apple TV is hard wired too. I have all the latest firmware and software installed on all my devices. Also both Airport Extreme's are setup using bridge mode and letting the Linksys serve the IP addresses for my network.
    Now to the problem. I can not explain when or why but my Apple TV and iTunes are not able to see each other after about 48 hours. I have tried all kinds of troubleshooting steps including changing my connection from being hard wired to wireless connecting directly to the Airport Extreme my iTunes computer is connected too. I know my network connection is good as I can see trailers and pull up video's from uTube.
    The only way to get them to see each other again is to do a factory reset of my Apple TV. After I do this they can both see each other again. But again after about 48 hours they lose the ability to see each other. I have taken these steps twice now to fix the problem
    I just finished reseting my Apple TV and am going to watch it to see when it stops working the next time.
    All of these problems started the other day when I introduced a new Apple Extreme N router in my my network. The airport Extreme seem to be working fine with my PS3 and XBox 360 that is also connected to it. So I don't think it's the router that is causing the problem.
    If I had to guess I would say something in the Apple TV is locking up. Although I have tried power cycling the Apple TV which does not fix the problem. I'm going through 3 routers to get between the Apple TV and the iTunes library somehow it appears the Apple TV is losing it way.
    I welcome any help as I don't want to have to keep factory resetting my Apple TV to keep it working.

    Fascinating just reading about your setup. I have a WRT350N and have noticed that it will drop its speed, sometimes down to 1Mbps. It seems to do so at about the same time every day, but usually comes back to speed in about 5 minutes. In my experience, the Apple TV will disconnect if the speed falls this low. Try monitoring the Linksys with Netstumbler, Vistumbler, or just in the Windows Network utility.
    Check the "lease obtained" and "lease expired" times for your router to see if that is when the network fails. I've just finished reading an angry thread over at the Linksys forum about the WRT330N where someone mentioned that the router wasn't renewing its lease.
    "I cannot set it run off automatic DHCP from the WRT330N, the router will not assign it an IP every time the lease expires, causing me to have to manually set an IP on the Print server. That's annoying. Having the router drop IP's to individual machines after 12-48 hours...very annoying."
    http://forums.linksys.com/linksys/board/message?board.id=Wireless_Routers&thread .id=67412
    If that is the problem, then I would consider setting up a Static IP address for your Apple TV. You can do that through the user interface -> Settings -> Network -> Configure ... (Quite intuitive as you only have change IP address and the subsequent details remain the same.)
    My router assigns IP Addresses in the ranges of 192.168.1.100 ->149. The idea here is to choose an address outside of that range but is not greater than 192.168.1.253 (and should not end in the number 1). You shouldn't have to change the linksys router as long as 50 clients are assigned in that range. You'll have to figure that out by accessing your router webpage at browser address 192.168.1.1 -> the default password is "admin" (without the quotes).
    Good luck.

  • Not able to see the PSA

    Dear Experts,
    I have enhanced the extract structure of  2lis_13_vdkon in R/3 with 5 fields which are exist in transfer structure.
    I have replicated the data source in BI but unfortunately i have not deleted the data in the PSA.
    After replication when i try to activate the data source the system is giving Dump and im not able to see the PSA also.
    Please help me out.
    When i manage on the data source to c PSA, its giving error like this
    Invalid DataStore object name 2LIS_13_VDKON_BB: Reason: No valid entry in table RSTS
    The Dump when activating the data source is :
    Runtime Errors         SAPSQL_ARRAY_INSERT_DUPREC
    Exception              CX_SY_OPEN_SQL_DB
    Date and Time          03.06.2009 09:46:55
    How to correct the error
         Use an ABAP/4 Open SQL array insert only if you are sure that none of
         the records passed already exists in the database.
         If the error occures in a non-modified SAP program, you may be able to
         find an interim solution in an SAP Note.
         If you have access to SAP Notes, carry out a search with the following
         keywords:
         "SAPSQL_ARRAY_INSERT_DUPREC" "CX_SY_OPEN_SQL_DB"
         "CL_RSAR_PSA===================CP" or "CL_RSAR_PSA===================CM006"
         "_UPDATE_DIRECTORY_TABLES"
         If you cannot solve the problem yourself and want to send an error
         notification to SAP, include the following information:
         1. The description of the current problem (short dump)
            To save the description, choose "System->List->Save->Local File
         (Unconverted)".
         2. Corresponding system log
            Display the system log by calling transaction SM21.
            Restrict the time interval to 10 minutes before and five minutes
         after the short dump. Then choose "System->List->Save->Local File
         (Unconverted)".
         3. If the problem occurs in a problem of your own or a modified SAP
         program: The source code of the program
    Regards
    venu

    Hi Venu,
    The issue I think is the PSA was not deleted cleanly. If you try and activate the PSA you will get the dump again.
    ..Probably if you go through the ABAP dump you will notice it is pointing to the following code;-
       75 * Put the fields of PSA to database without check, otherwise error by
       76 * activation of table
       77
       78   IF p_psa_exists EQ rs_c_false OR
       79      i_new_version     EQ rs_c_true.
    >>>>>     INSERT rstsodsfield FROM TABLE l_t_odsfield.
       81   ELSE.
       82     DELETE FROM rstsodsfield
       83       WHERE odsname = l_s_odsfield-odsname
       84       AND  version = l_s_odsfield-version.
       85     MODIFY rstsodsfield FROM TABLE l_t_odsfield.
    Put a breakpoint in the code in line 78. and activate the DS..the program should stop in 78...change the value of variable rc_c_false so that line 82 gets executed. This will clean up the PSA entries in table rstsodsfield. Now activate the DS and delete the PSA entries in the PSA table.
    We faced the same issue and resolved it this way.
    Thanks
    -Saif

  • Not able to see PSA for the data souce 2lis_13_vdkon after enhaning

    Dear Experts,
    I have enhanced the extract structure of 2lis_13_vdkon in R/3 with 5 fields which are exist in transfer structure.
    I have replicated the data source in BI but unfortunately i have not deleted the data in the PSA.
    After replication when i try to activate the data source the system is giving Dump and im not able to see the PSA also.
    Please help me out.
    When i manage on the data source to c PSA, its giving error like this
    Invalid DataStore object name 2LIS_13_VDKON_BB: Reason: No valid entry in table RSTS
    The Dump when activating the data source is :
    Runtime Errors SAPSQL_ARRAY_INSERT_DUPREC
    Exception CX_SY_OPEN_SQL_DB
    Date and Time 03.06.2009 09:46:55
    How to correct the error
    Use an ABAP/4 Open SQL array insert only if you are sure that none of
    the records passed already exists in the database.
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "SAPSQL_ARRAY_INSERT_DUPREC" "CX_SY_OPEN_SQL_DB"
    "CL_RSAR_PSA===================CP" or "CL_RSAR_PSA===================CM006"
    "_UPDATE_DIRECTORY_TABLES"
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
    To save the description, choose "System->List->Save->Local File
    (Unconverted)".
    2. Corresponding system log
    Display the system log by calling transaction SM21.
    Restrict the time interval to 10 minutes before and five minutes
    after the short dump. Then choose "System->List->Save->Local File
    (Unconverted)".
    3. If the problem occurs in a problem of your own or a modified SAP
    program: The source code of the program
    Regards
    venu

    Hi Venu,
    The issue I think is the PSA was not deleted cleanly. If you try and activate the PSA you will get the dump again.
    ..Probably if you go through the ABAP dump you will notice it is pointing to the following code;-
       75 * Put the fields of PSA to database without check, otherwise error by
       76 * activation of table
       77
       78   IF p_psa_exists EQ rs_c_false OR
       79      i_new_version     EQ rs_c_true.
    >>>>>     INSERT rstsodsfield FROM TABLE l_t_odsfield.
       81   ELSE.
       82     DELETE FROM rstsodsfield
       83       WHERE odsname = l_s_odsfield-odsname
       84       AND  version = l_s_odsfield-version.
       85     MODIFY rstsodsfield FROM TABLE l_t_odsfield.
    Put a breakpoint in the code in line 78. and activate the DS..the program should stop in 78...change the value of variable rc_c_false so that line 82 gets executed. This will clean up the PSA entries in table rstsodsfield. Now activate the DS and delete the PSA entries in the PSA table.
    We faced the same issue and resolved it this way.
    Thanks
    -Saif

  • Not able to see Print Preview of Purchase Order.

    Dear All ,
                                                                       I m not able to see  the Print preview of Purchase Order , as the P.O is well release , but as i m click on Print Preview , an info displays in task bar , -> "  Error in OPEN_FORM for document 4501472103
    Message no. ME142
    Procedure
    Report the error to your system administrator.
    I request you to pl help how to fix this problem.
    Rgds,
    sap11

    thanx for your support , here i need to know one thing that i had gone to MN06 to display the cond. record , here for the output type i m using in P.O
    Given below different key comb. are maintained for same p.o , but as p.o was created then in message tab the first combination of fax was displayed and for this combi when clicking on print preview the message came for " Error in open _form " .
    1) P doc type / P. org./ Vendor =  Medium = 2 ( fax) / Date / time = 1 , is maintained
    2) P Doc. Type / P.org / Pgrp  =  Medium = 1 / date/ time = 1 is maintained.
    3)  P Doc. Type / P.org =         Medium = 1 / date/ time = 1 is maintained
    4)P org.                        =         Medium = 1 / date/ time = 3 is maintained
    Here my querry is that as medium = 1 ( print output ) is also maintain then why Other comb, were not triggered , why only Comb. for medium -=2 ( fax ) was trigered , and after that as i changed the medium to 1 , i m able to see print preview , why ?
    why i m not able to see p prwe for medium 2 ?
    Thanx n rgds,
    sap11

Maybe you are looking for