Not able to see shared media of latop in N900 file...

hi everyoone,
I have a problem with a very nice feature of n900 shared media of laptop via wlan router.
this is really very useful feature.
problem with this is some time it just show me in filemanager and also in media player when i am connected to wifi and my laptop is also connected to same wifi. it just appear automatic. but some time I can't see this in both filemanager and media player. don't know how to configure it some one please help how to solve this problem ? Is this problem because of any software which I installed ?

sounds like you are not connecting to the same wifi.

Similar Messages

Not able to see the content of opened files (.jpg or .psd) in Photoshop CS6

I recently downloaded Adobe Design and Web Premium CS6. I am not able to see the content of any of the file I open (.psd or .jpg). I do see the file has been opened as the file name appears on the open file tabs, I also see the preview of the file in the Navigator Window and list of layers in the layers window. I am relatively new to this so might be missing on some option that needs to be turned on or something.
I am using Window 7 Professional, Service Pack 1, with 8GB RAM.
Any suggesstion/help is greatly appreciated.

This is going to be the weak point:
Intel(R) HD Graphics card
While the Intel HD chip is fine for general computer work, it is weak for programs, like Photoshop and Adobe Premiere. The driver support is usually very bad, as well. If Lenovo does not have updated drivers, that work better, about the only choice that one has with a laptop is to turn OFF graphics accleration, and wait for a new driver. That will probably be very slow in coming.
Good luck,
Hunt
PS - Noel's link will list what you are missing.

File Monitoring - Not able to see File Path on the Detail Information Tab

Hi Experts:
I am setting up the "File Monitoring" in the Solution Manager. I am having STA/PI01L_CRM570 on the Solution Manager.
And on the Satelite System - ECC I have STA/PI 01L_ECC600
While I am setting up the parameters, I am supposed to provide the file path in "Detail Information" tab page.
But I am just able to see two tabs:
Count and Short Text (optional).
I checked all the other tab but not able to locate where I need to provide the file path.
Can any one let me know, If I am missing anything or do I need to do any further steps.
Similarly for the File Size setting:
I am not able to see where I can define The parameter "File Pattern (e.g. *.log, *.txt or any string)" is mandatory.
Pls let me know.
Regards
John

Hello Johns,
You can find the FilePath in the 'Detail Information' tab if you double click the initial and predefined counter 001.
Best regards,
Goncalo Mouro Vaz

When I go to create a new project in imovie using the iPhone 5, I am not able to see any of my video clips or photos that are saved on the device.

When I go to create a new project in imovie using the iPhone 5, I am not able to see any of my video clips or photos that are saved on the device.

When you move or copy the compound clips with their events into an external drive all the events should be there. Not clear on why you want to move them into a single event. You can drag and drop from one event to another.
Why are you using compound clips? You can simply copy the project from each machine with used media onto the external drive and that should do it.

Users not able to see remote users on the node network

Users that belong to one node are not able to see users in another calendar
server node. Both calendar servers are pointing to the same directory server.
Some errors that occur in the log files:
DEXOTEK ERRCODE Ox13608 -> SchedBaseOpen: Section name too long
DEXOTEK ERRCODE Ox13608 -> OpenConnection: SchedBaseOpenOnHost
And when uninode -cws nodeID is run, it does not report being able to see all
the users and resources on the remote nodes.
uninode: connected to hostname.net.xxx.com, node 10000
directory of items: 10 (USERS = 10/RESOURCES = 0)
CONNECTION EX AV Q-SIZE IN-PROCESS IMPORT-DIR
(10000)->xxxxxx.xxx.com(10001) 2 2 0 0 370 (U=370/R=0)
Here is the nodes.ini file:
+ H=xxxxxxx.xxx.com/N=10000
+ H=xxxx.xxx.com/N=10001
all=2
There is a reported bug, that 16 chars is max on domain names for the nodes.ini
file, which means that you need to change that file and use:
     a) an alias that can be resolved on the network with either DNS or local
     host files
     b) use the IP address.
As documented in the release notes, here is the procedure on how to modify the
hostname when it is too long. Or how to modify the hostname for any reason.
Fix for long host names problem
If the fully qualified domain name for your network exceeds 16 characters, it
will be necessary to shorten the host name of all the servers in the Calendar
Server network . These instructions must be carefully followed to avoid causing
problems with the network. Ensure that the procedure is applied to ALL nodes in
the Calendar network.
1) The following procedure should be carried out on each server in the
Calendar network:
a) Bring the Calendar services down.
% unistop -y
b) Run the unidbfix command in export mode.
% unidbfix -export -n node-id
This will create a remotenode.ini file for each node on the server. The file is
located in the node's perm directory.
Example:
If you have two nodes on the server ROCK, node 1(in N1) and node (in N2), the
files are:
/users/unison/db/nodes/N1/perm/remotenode.ini
/users/unison/db/nodes/N2/perm/remotenode.ini
The remotenode.ini file will look something like this:
[1]
RN_NUMCONNECT = 2
RN_SURNAME = "unison"
RN_GIVENNAME = "unison"
RN_ORGUNIT1 = "uni2"
RN_ORGUNIT2 = "openmail"
RN_ORGANIZATION = "ABC Corp"
RN_ACCESSMETHOD = 2
RN_SERVICENAME = "unieng"
RN_HOSTNAME = "rock"
[2]
RN_NUMCONNECT = 2
RN_SURNAME = "unison"
RN_GIVENNAME = "unison"
RN_ORGUNIT1 = "uni4"
RN_ORGUNIT2 = "openmail"
RN_ORGANIZATION = "ABC Corp"
RN_ACCESSMETHOD = 2
RN_SERVICENAME = "unieng"
RN_HOSTNAME = "rock"
2) Once you have run unidbfix in export mode on all the servers, proceed as
follows:
a) Compare the remotenode.ini files and verify that the entries are the
same. In each file, you will note that an entry for the local node is not
included.
b) Edit one of the files (on any of the servers). This file will be
referred to as the master file. Add the appropriate entries for the
local node (copy the section from one of the other files). Modify the
RN_HOSTNAME in each of the sections of the master file to shorten the
name.
c) Copy the master file in the perm directories of each node on all the
servers.
3) Once the master file is in the perm directory of all the nodes, proceed as
follows on each server:
a) Run the unidbfix command in the -import mode.
% unidbfix -import -n node-id
b) Edit the nodes.ini file on the hub server and make the same changes to
the host names. You do not need to apply the changes.
c) Edit the [UTL] section of the /users/unison/misc/unison.ini file and
change the host name.
d) Start up the services.
% unistart
4) After all the changes have been made, run the uninode -cws all and
uninode -snc all commands and verify that the results are accurate.

See this:
http://docs.info.apple.com/article.html?path=Mac/10.6/en/8203.html
You should then see your pcs listed in Finder's sidebar under the shared section.
Regards

After webcatalog migration from 10.1.3.3 to 10.1.3.4.2 not able to see user

Hi Gurus,
I am facing an issue with web catalog migration.
Currently we are on 10.1.3.3 version and upgrading to 10.1.3.4.2.
As part of migration i have taken the RPD, NQSConfig, Web catalog, instanceconfig.xml files as backup. i followed manual way while taking the web catalog backup i.e zipped(tar) the prod catalog and moved it to some folder.
After 10.1.3.4.2 installation i have moved this zip file to the /OracleBIData/web/catalog and unzipped it. restarted all the servers. when we logged in presentation services we are not able to see the reports which we saved in "My Folder" when it comes to the reports which we saved in "Shared Folder" i am able to see all the reports and dashboards.
to debug this further i opened the web catalog by using web catalog manager and found out that all the reports and .atr files are there under that user ( USER folder, corresponding user folder ), and instead of my presentation server recognizing this folder its creatin new folder for the same user.
Because of this issue our release plans are getting postponed, please advise me.
what could be the problem and if i have done some thing wrong while taking the backup pls let me know the best way of backing up the web catalog.
Thanks,
Seshu

try this:
Archive all folders from 10.1.3.3 using catalog manager.
Update instance config on 10.1.3.4.2 so that it'll create a new webcat, open it and unarchive above folders.
If helps pls mark

Cisco 877w - Apple devices not able to see wired apple TV

Hello All,
Can anyone point me to a doc or forum discussion on how to setup the wireless interface to forward multicast packets? Basically I cant get the ipads etc.. to see the AppleTV to control it. I connected an AP and it works fine so its got to be something with the way the router handles the packets from teh integrated wireless interface. I've been searching the forum for about 1hr and haven't founf anything other than a breif mention of broadcast forwarding and multicast setup.
Has anyone got anything more complrehensive I can read?
Thanks
David

Hello David,
Thank you for contacting the Sales Acceleration Center (SAC) regarding your recent inquiry, Case Number
Case Description:
Cisco 877w - Apple devices not able to see wired apple TV
Case Solution:
The Bonjour service uses multicast to advertise your Home Sharing enabled device to the local network. In my case the Cisco 877W I was using had a Layer 3 enabled BVI (Bridged Virtual Interface) to which the Wireless Dot11Radio interface was not fowarding multicast packets properly.
First of all, obtain the Multicast groups your wireless adapter is configured for (on Windows open a command prompt and run the below command):
The result will give you an output as per below, we are interested in the multicast address directly after the 224.0.0.252 address 239.255.255.250:
Then we need to enable multicast routing on the router, connect to your router and enter config terminal mode:
Next we will configure IGMP v3 and add the relevant Wireless interface on your router to the correct multicast address group:
Next perform the same config your BVI interface:
Once complete save your changes and confirm both interfaces have been added to the multicast groups using the command sh ip igmp group:
You now need to reload your router and restart iTunes and then attempt to connect to Home Sharing from your Apple TV.
Other commands that I used to troubleshoot with were:
debug ip mpacket - Multicast Packet Debugging
debug ip mroute - Debug Multicast Routing
sh ip mroute - Show IP Multicast Routes
By default the Cisco implementation of a Dot11Radio interface and a BVI interface don't appear to forward multicast packets between each other. Seems odd to me as they're both in the same L2 bridging group..anyway.
I am going to close the case for this specific inquiry on my side. If you need moere information Please feel free to reach out to me or any member of the SAC team if we can be of any further assistance or if you have any other related questions in the future. We strive to provide you with excellent service. We value your input and look forward to serving you moving forward.

Not able to see General Documentation in Implementation Project

Hi All,
I've created one Template Project and one Implementation Project. Now I've added some documents to Template Project - General Documentation Tab. Ideally this newly added documents should be appeared in Implementation Project - General Tab. But in my case I am not able to see this newly added documents. Is there any reason behind this? What should I do to make them visible in Implementation Proj - General Documentation tab?
Another question is, If a document from Project Documentation tab is deleted by pressing 'Delete Row' button (not actual 'Delete' button), how can I retrieve that document? How can I see the list of all deleted documents?
Thanks in advance!
Shaun
Edited by: shaun99 on Feb 16, 2012 4:28 PM

Hi Shaun,
For the implementation project, please read the session "USING THE TEMPLATES" in the wiki page for template projects, where it explains how to update your project with the changes made in the template project.
-http://wiki.sdn.sap.com/wiki/x/gRkMDg
regarding the download, I'm not aware of any easy way to do mass download of the documents. Maybe in SI80 you could do such thing but I believe you would only be able to filter by the folder where the documents are phisically stored and as you're using a template project, all the documents are stored in the folder SOLAR00, shared along with solutions and etc..
more info about this in the wiki page for documents in solar01 and solar02:
-http://wiki.sdn.sap.com/wiki/x/rBoMDg
Kind regards, Fabricius

I'm not able to see Planning Application in Planning Webclient

Hi,
I have created a Classic Planning Application in WorkSpace successfully and I'm able to see the same application after Refreshing application in EAS Console.
I have done necessary steps registering application with the shared services and I'm able to see that application in shared services project also. But I'm trying to access this application through Planning URL I'm not able to see Planning Application in Drop down list.
Could anyone suggest me what could be the problem for this?
We are using HYperion Planning Fusion Edition 11.1.1.2 Version.
Thanks,
Suresh.

So you have created a planning application and it was succesful, you go directly to planning and don't see it in the dropdown?
If so when you created the application what instance you set it against, if you have more than one instance and you have it against the non active instance you won't see the planning application in the drop down.
Cheers
John
http://john-goodwin.blogspot.com/

Not able to see Consolidation Administration

Hi All,
I am not able to see the Consolidation Administration from Navigate--> Administer -->Classic Application Administration.
But i am able to see Applications --> Consolidation --> here i am able to see the created applications.
after creating the applications from HFM destop , i am trying to access from workspace i'm getting the error not registed with shared services.
i registered with "HFM Application Registration.exe" still i'm getting the same error.
in shared services also if i select the created application under HFM projects getting error " application is inactive". How to make active an application?
Please let me give the solution if anyone knows
Thanks in advance
Kiran

In this case, I think that there is no real need to change the ports to fix the problem. What you should do is to reconfigure the Web Server from Hyperion Reporting and Analysis configuration. If after this, you still have the same problem, step back and redeploy to Application Server as well. In several occasions in the past I had to step back to the beginning (Shared Services) and reconfigure everything from scratch. Finally it worked though.
As far as we have understood by experiencing the same problem with 9.3.1, we have concluded that when you install the suite on a server that may not be a super hardware, you have to pause and wait between installation and configuration steps, in order for the services previously installed to start running for good. As soon as you start the shared services and the windows services console indicates the service as started, it takes however some time before it's really started. If during that time you go on with installing and configuring next products (hfm, reporting etc), the configuration reports success, but you end up with the problem of opening applications through the workspace.

Not able to see the data in the report

Hi All
      In my cube i am having data.But when i am running the report ,i am not able to see the data.
    The error its throwing is -No Applicable data found.
    what could be the problem,please provide me the idea to solve the problem.
Thanks&regards
syam prasad dasari

HI,
See that any restrictions are there in the report(Filters)....Give the same restrictions in Listcube and see if you are getting data or not.....
Thanks

Not able to see data in the qualifier table of the main tbl , Data Manager

Hi,
I have an issue of not able to see the data of two qualified table after populating them.
It is in mdm-5.5 ps4.
When populating data first time ,it shows up in those two table slots in the right side of the Data Manager.
However subsequently it does not show up in those slots , only by right click on the table and selecting "View/edit", the window pops up where those data shows up.
However unlike other qualified tables the data does not showup automatically for these two tables.
Appreciate any suggestion or feedback on this.
regards,
-reo

You may have checked the Filter Check Box next to the Qualified Lookup cell in Data Manager, when the current table is the Main Table.
You use the Filter Checkbox to limit the qualified table records by the current search selections.
Secondly, you have see if there are any Qualified Links to the main table record you are viewing.
If not, create the Qualified links in Data manager, for the main table record and the Qualified Table Record.
Once this is done, you will see the Display fields of the Qualified table for which the links exists for the given main table record.
Message was edited by:
Adhappan Thiagarajan

Not able to see data in Pivot table

Hi,
I have a issue with pivot table i have a column which displays values 0 and 1 and another column called month when i am placing this month column as a section and values column as a measure i am not seeing any values means i can see the month as header but instead showing 0 or 1 its showing blank columns. previously i created similar kind of table it worked but at that time values column data type is number this time its char. can anybody help me out how i can see the data in the pivot table. i already tried converting this column to number but still i am not able to see data in that values column.
Thanks

Hi copter,
Place the month column in rows and value column in measure section and check if results are coming.If still it doesnt come i suppose you dint apply aggregation rules to value column.In pivot view click values column and aggregate by /select min or max or either server complex and check your results.
(I suppose your aggregation rules is default)....Correct this one and you can place it in sections as per your requirement.
Cheers,
KK

Not able to see data in 0FIGL_V30 & 0FIGL_V31

Hi,
I've activated / installed standard business content for EpH3 i.e Mutltiprovider 0FIGL_M30 and entire data flow which includes reports and virtual providers 0FIGL_V30 & 0FIGL_V31.
I'm able to see data in cubes where above virtual providers read data from. here is the link from help.sap.com
http://help.sap.com/erp2005_ehp_03/helpdata/EN/6b/fdc62d9e0b444cb14b7f424d9f9cb7/frameset.htm
Issue is i'm not able to see data in Virtual providers 0FIGL_V30 & 0FIGL_V31 and hence in reports.
Can anyone advice please. thanks
SD

Hi All,
Yes I've checked data in underlying cubes.
Mulitprovider is fine.
I've added Master Data for both 0GL_ACCTP and 0ACCESSTP
RFC connection is fine.
No DTP & Transformation since this is Virtual Provider based on Functional Module.
However when I debug FM for 0FIGL_V30 & 0FIGL_V31 - I see no data and thought there might be master data issue b/w 0GL_ACCOUNT & 0GLACCEXT but MD is fine.
It just not pulling data.
Is there some setting I'm missing?
FM's used for Virtual Providers are
0FIGL_V30 - RS_BCT_FIGL_SREP_DATA_GET_V30
0FIGL_V31 - RS_BCT_FIGL_SREP_DATA_GET_V31
SD

Not able to see Data in Xcelsius 2008

Hi everyone,
My question is I am not able to see data in Xcelsius spreadsheet although I am able to connect to SAP BW and also able to see and select query but when I select Cross Tab Data in output Values it is not displaying in Xcelsius spreadsheet
System Info
Xcelsius 2008 Enterprise Trial Version SP 3.0
SAP BW 7.1 SP 6 ABAP and JAVA
Any help would be appreciated

Hi Rashid,
When you are using the BW conenction in Xcelsius you will not see any data in the spreadsheet at design time or at preview time.
To see the data you need to go SAP > Publish, then SAP > Launch to test the dashboard in the NetWeaver Portal as that is the only place where the data can be viewed.
Regards
Matt

Not able to see shared media of latop in N900 file...

Similar Messages

Maybe you are looking for