Not able to see Subcomponents

Hi
       Not able to see Applications,components and models of a successful deployed content in the content administrator .What is the reason and where to get a clue.
Thanks and help much appreciated.

Hi,
To see the deployed applications in content admin, you need to create a folder, define a iview for the application using template.Then you should be able to see the applications in content admin.
Have you done this ? or is your query something else ?
Cheers...,
Raghu

Similar Messages

  • Not able to see the data in the report

    Hi All
          In my cube i am having data.But when i am running the report ,i am not able to see the data.
        The error its throwing is -No Applicable data found.
        what could be the problem,please provide me the idea to solve the problem.
    Thanks&regards
    syam prasad dasari

    HI,
    See that any restrictions are there in the report(Filters)....Give the same restrictions in Listcube and see if you are getting data or not.....
    Thanks

  • Not able to see data in the qualifier table of the main tbl , Data Manager

    Hi,
    I have an issue of not able to see the data of two qualified table after populating them.
    It is in mdm-5.5 ps4.
    When populating data first time ,it shows up in those two table slots in the right side of the Data Manager.
    However subsequently it does not show up in those slots , only by right click on the table and selecting "View/edit", the window pops up where those data shows up.
    However unlike other qualified tables the data does not showup automatically for these two tables.
    Appreciate any suggestion or feedback on this.
    regards,
    -reo

    You may have checked the Filter Check Box next to the Qualified Lookup cell in Data Manager, when the current table is the Main Table.
    You use the Filter Checkbox to limit the qualified table records by the current search selections.
    Secondly, you have see if there are any Qualified Links to the main table record you are viewing.
    If not, create the Qualified links in Data manager, for the main table record and the Qualified Table Record.
    Once this is done, you will see the Display fields of the Qualified table for which the links exists for the given main table record.
    Message was edited by:
            Adhappan Thiagarajan

  • Not able to see data in Pivot table

    Hi,
    I have a issue with pivot table i have a column which displays values 0 and 1 and another column called month when i am placing this month column as a section and values column as a measure i am not seeing any values means i can see the month as header but instead showing 0 or 1 its showing blank columns. previously i created similar kind of table it worked but at that time values column data type is number this time its char. can anybody help me out how i can see the data in the pivot table. i already tried converting this column to number but still i am not able to see data in that values column.
    Thanks

    Hi copter,
    Place the month column in rows and value column in measure section and check if results are coming.If still it doesnt come i suppose you dint apply aggregation rules to value column.In pivot view click values column and aggregate by /select min or max or either server complex and check your results.
    (I suppose your aggregation rules is default)....Correct this one and you can place it in sections as per your requirement.
    Cheers,
    KK

  • Not able to see data in 0FIGL_V30 & 0FIGL_V31

    Hi,
    I've activated / installed standard business content for EpH3 i.e Mutltiprovider 0FIGL_M30 and entire data flow which includes reports and virtual providers 0FIGL_V30 & 0FIGL_V31.
    I'm able to see data in cubes where above virtual providers read data from. here is the link from help.sap.com
    http://help.sap.com/erp2005_ehp_03/helpdata/EN/6b/fdc62d9e0b444cb14b7f424d9f9cb7/frameset.htm
    Issue is i'm not able to see data in Virtual providers 0FIGL_V30 & 0FIGL_V31 and hence in reports.
    Can anyone advice please. thanks
    SD

    Hi All,
    Yes I've checked data in underlying cubes.
    Mulitprovider is fine.
    I've added Master Data for both 0GL_ACCTP  and 0ACCESSTP
    RFC connection is fine.
    No DTP & Transformation since this is Virtual Provider based on Functional Module.
    However when I debug FM for 0FIGL_V30 & 0FIGL_V31 - I see no data and thought there might be master data issue b/w 0GL_ACCOUNT & 0GLACCEXT but MD is fine.
    It just not pulling data.
    Is there some setting I'm missing?
    FM's used for Virtual Providers are
    0FIGL_V30  - RS_BCT_FIGL_SREP_DATA_GET_V30
    0FIGL_V31 - RS_BCT_FIGL_SREP_DATA_GET_V31
    SD

  • Not able to see Data in Xcelsius 2008

    Hi everyone,
    My question is I am not able to see data in Xcelsius spreadsheet although I am able to connect to SAP BW and also able to see and select query but when I select Cross Tab Data in output Values it is not displaying in Xcelsius spreadsheet
    System Info
    Xcelsius 2008 Enterprise Trial Version SP 3.0
    SAP BW 7.1 SP 6 ABAP and JAVA
    Any help would be appreciated

    Hi Rashid,
    When you are using the BW conenction in Xcelsius you will not see any data in the spreadsheet at design time or at preview time.
    To see the data you need to go SAP > Publish, then SAP > Launch to test the dashboard in the NetWeaver Portal as that is the only place where the data can be viewed.
    Regards
    Matt

  • Not able to see hierarchial org structure by clicking on Expand this branch

    Dear experts,
    I am currently using the Online data extraction via sap for Nakisa Integration with SAP Landscape.
    I have completed the configuration of Nakisa with the help of configuration guide and administrator guide - After completing administrator steps the org chart is visible - When i navigate to the org structure i can see the org unit under the org structure root that i configured as an administrator in the general settings section.
    When i click the + sign ie on expand this branch i am not able to see all teh org units under the displayed branch.
    Can you please guide me regarding how one can view the org structure below the selected branch when i click on expand this branch section.
    Manager Personnel Id is not maintained for this org unit - Should the user clicking on the expand this branch be the manager of the org unit to see the org structure.
    Regards
    HKishan

    Dear Luke,
    I am not able to see that navigation icons within an org chart box - The org unit that is displayed on clicking the orgchart does have branches in SAP but i am not able to see these navigation icons that lead me to these branches.
    Is there any specific step that needs to be done to see these branches.
    By the way what is the log file you are refering to is it the "PresentationResources.xml " or is it any other log file.
    Regards
    Hkishan

  • Not able to see the tree on the jspx page after running

    Hi All,
    This is something strange.I am dragging the VO on the page fragment from the data control as adf tree. And I am using the panel collection as component for adf tree.
    After running the jspx when I am moving to the fragment I am not able to see the tree.
    However when I am running the AM it is working properly for the view objects and view link used to populate the tree.
    Can anybody put some thoughts on this.
    Thanx
    Kanika

    Thnx for your replies..
    I am dropping taskflow as region . I am not using the switcher component.
    On left side of the page the tree is visible now. but the taskflow is not refreshing on the click of the tree node based on the value of the node.
    Please advice how to accompolish this now??

  • Not able to see the request in ODS to activate

    Hi all,
    I have a content ODS, i scheduled a infopack and the data came in thru ok. But inorder to upload the data into the cube, i know i need to activate it before. But when i rightclick and go to activate data in the context menu .. there is a popup which shows all the request id's in the ODS. but i'm not able to see my request to activate it ... Is there some flag has to be set inorder to see the requests in the activation list? once its activated, I think all i need to do is "UPDATE ODS DATA TO DATAPROVIDER" as it is a standard content. Is there something else i need to do ..Pls guide.
    Now, I have a new problem, when i'm trying to see the transfer structure, it doesnt open and i get a msg
    Transfer method 'TRFC with PSA' is not supported by the source system
    Diagnosis
    The PSA transfer method is used to transfer data from source system CRM to transfer structure 0xxx_xx_xx_I_BB. Source system CRM does not support a PSA transfer.
    Procedure
    Define the PSA in the source system.
    Its actually a content one i installed and i didnt do any customizations to it... Shouldnt it work out of box? If no!! how can i define PSA in the source system.
    Any help is appreciated.
    Mav.

    Hi Mave,
    Kindly check the following:
    1.) Are you sure that the loading process finished successfully in the ODS? Kindly ensure it did.
    2.) Have you tried providing a longer <b>Date Range</b> in the <i>Request Display</i> (lower right).
    --Jkyle

  • Report exection problem for one user - not able to see the data.

    Hello Friends ,
    Need some help . I have got the one ticket from bussniess side about the report execution .
    Unfortunately , I am also not having authorisation of that report due to sensible data.
    Problem - User is executing the report but some how he is not ABLE TO see the data for one company code Hierachy .
    I executed the same report through RSSMQ via his user id , and I got the  below message.
    All value were selected . Hierachy Authorisation cannot be used.
    A displayed hierachy requier a hierachy authorisation .
    But when i checked his authorisation , I am able to see that he should have authorisation to all the hireachy .
    could you please let me know , how can I check more ?
    Regards,

    after accessing the report , u go to su53 tcode and check the authorization and u can see what is problem in authorization for the that user and u can send the details to secuity team to rectify the issue ,

  • Not able to see the result in particular column of BPC report

    Dear All,
    I have problem in one of the BPC report where I am not able to see the result into one column but rest of the users are able to see the result for same column in same report without any issues.
    Generally, I used this report frequently but having such problem from last few days. Excel has created any logs which I need to clear? Please advice.
    Request your help to resolve such problem please.
    If you need any information, please let me know.
    Thank You
    Kind Regards
    Anukul

    Hello Anukul,
    In the report what type of data you are trying to check in that column. can you please brief about report.
    And also please check the excel cell format (right click and check it is a numeric or character), which may help to resolve this issue.
    Regards,
    Rajesh.K

  • Not able to see the records in master data

    Hi friends
    My requirement needs the data to be loaded from a RDM table.I created a data source in the R/3 and by using the extracto checker i am able to see the data.I created the info packages one for Attr and other Txt,replicated the datasource and loaded the data.I am able to see the data in the PSA and when i go into monitor in the infopackage it says the data has been loaded and it shows no errors.But I am not able to see this data in the master data info object.Can anyone please help me out???
    Mouli

    Hi
    Check out your infopackage setting: if its upto PSA or to MD table also
    Open Master data table in SE11 and check the OBJVERS field wether the MD is activated or not!
    Regards
    GSK

  • NOT ABLE TO SEE SQL EXPRESSION FIELDS IN CR2008

    Hi,
    I am not able to see the SQL EXPRESSION FIELDS in the FIELD EXPLORER of CR 2008.Can
    you please help me
    BABASHARI

    Hi,
    I would suggest you open the question in the Crystal Reports forum.
    Ingo

  • Service Desk end user not able to see messages

    Hi
    Im configuring service desk.Iam facing following issues.
    1. In solution manager service desk user could not able to see his submitted messages.He could able to submit his message and they are appearing in crm_dno_monitor. Is there any way he can see his submitted messages and message status.
    2. I have assigned following roles to user, but he couldnot able to send message and getting 513 error. If i assign sap_all to him, he is able to submit message. Just i wanted to know how can i avoid sap_all to him.
    ZSAP_SOL_SERVTRANS_CREATE
    ZSAP_SUPPDESK_CREATE
    ZSAP_SV_FDB_NOTIF_BC_CREATE
    Your help is highly appreciated
    Thanks
    Regards
    Mahi

    Hi Mahi,
    Please check about Workcenter:
    1160651:  Work Centers: How to Customize (Solution Manager)
    http://help.sap.com/saphelp_smehp1/helpdata/en/6a/4b4713fc2e45ad921a20b0831d07a5/content.htm
    Make sure the user has the following roles:
    SAP_SUPPDESK_CREATE
    SAP_SUPPCF_CREATE
    SAP_SMWORK_BASIC
    SAP_SMWORK_INCIDENT_MAN
    Message processor:
    SAP_SMWORK_BASIC
    SAP_SUPPDESK_CREATE
    SAP_SUPPDESK_PROCESS
    SAP_SUPPDESK_DISPLAY
      SAP_SMWORK_INCIDENT_MAN
    Concerning this please pay attention of the note:
      834534 - SAP Solution Manager roles in Release 7.0
    Error message 513 is probably caused by incorrect or incomplete
    customizing. Please review attached note 864195 for more details.
    Please also ensure note 1356510 has been applied in your system,
    you may find more explanation in note 1522809.
    Please check the authorizations for your key users. The key user
    shouldn't have the following value on authorization object CRM_TXT_ID:
    TEXTID   SU15
    ACTVT    02
    FM AI_SDK_KEY_USER_CHECK can be used to check a user is a key user or
    not. The key user should have limited authorizations on authorization
    object CRM_TXT_ID.
    Please check security guide for the message processor roles and
    other roles. You can download the security guide from below link which
    will be available to download after half an hour or so or you can also
    find security guide from below link:
    http://service.sap.com/instguides -> SAP Components -> SAP Solution
    Manager
    Thanks
    Regards,
    Vikram Jain

  • ITunes musical library located on a WD 2TB, ext. drv. Computer destroyed by virus; ED survived. Bought new laptop, connected ED. Not able to see library. ED shows as 'G:' 95% full. How can I reconnect my old library to new laptop?

    I had my iTunes musical library on an ext. drv. WD 2TB, ‘MY BOOK ESSENTIAL'. Three weeks ago, my computer was infected by a virus that fried it. It did not affect the external drive. I bought a new computer: a laptop, Dell XPS, Intel Core i7-2630QM CPU, Windows 7 Home Premium. I have been able to connect the WD external drive; however, I am not able to see the musical library in my iTunes or Explorer. ‘My Computer’ shows the external drive as ‘G:’ 95% full. It reads, 32.1 GB free of 1.36 TB. When I click on the drive to see its contents, it shows nothing. The library in iTunes also shows nothing. Can anyone help, please? How can I reconnect my old musical library to my new laptop and iTunes? Many thanks.

    Hmm, viruses don't generally "fry" drives. They can make bootable operating systems not bootable, hide data, and corrupt executable files. Software can potentially wipe all the data from the drive but it shouldn't be able to physically damage the drive. Bah! What's done is done.
    As to unhiding your files assuming they are just hidden....
    Hit Start > Run, type in CMD and press enter. Type the following at the prompt and then press enter:
    attrib -h -s -r g:\*.* /d /s
    This tells windows to clear the hidden, read-only, and system flags from all files on the drive, assuming of course your profile has the power to "see" the files and change them.
    If that doesn't work then you may need to take ownership of the drive first. The drive may have security settings that make it "belong" to an account on your old system. Right-click on the drive in Windows Explorer and click Properties. Click the Security tab, the Advanced button, the Owner tab, then the Edit tab. Make yourself the owner, then you can make any other changes to the security settings you want to back on the Permissions tab. (If you can't change the owner log out and log back in as Administrator). For iTunes your account (or everyone) and SYSTEM need full access to all files. Any changes you make should be applied to "This folder, subfolders and files", should be inheritable and you should also replace the permissions on all child objects.
    tt2

Maybe you are looking for