Not able to see the new form in Portal

Hi Experts
I have configured a new HR Form (Adobe) using HRASR_DT and the other SPRO links in ECC but when i log on to Portal I do not see this new form. I have configured the Process for the ISR Scenario same as the other forms but other forms are visible on the Portal UI but not this newly developed form. What could bw the reason for it?
I have validated the security roles etc.
Can anyone help me with what config/code I am missing?
Regards
Kushagra

Hi
Any help plz...

Similar Messages

I am not able to see the new drive

I have a Sun Blade 2500 with SUN 5.9 OS installed.I have on hard disk drive in it and now i attached another drive in this system but i am not able to see the new drive when i run the below command
bash-2.05# echo | format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
0. c0t0d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
/pci@1d,700000/scsi@4/sd@0,0
Specify disk (enter its number): Specify disk (enter its number):
==============================================
Although i can see two drives in the output of below command:
bash-2.05# iostat -E |grep Size
Size: 73.40GB <73400057856 bytes>
Size: 73.40GB <73400057856 bytes>
Size: 0.00GB <0 bytes>
Edited by: 842294 on Apr 6, 2011 4:40 AM

Resolved
bash-2.05# cfgadm -c configure c0
bash-2.05# echo | format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
0. c0t0d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
/pci@1d,700000/scsi@4/sd@0,0
1. c0t1d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
/pci@1d,700000/scsi@4/sd@1,0
Specify disk (enter its number): Specify disk (enter its number):

I have Photoshop Lightroom 5 and have downloaded Camera Raw 8.7.1 &DNG converter successfully. I have a new Sony Alpha 7 11 model ILCE-A7M2 that is supported by LR5. I am still not able to see the RAW pictures. The message says preview unavailable for thi

I have Photoshop Lightroom 5 and have downloaded Camera Raw 8.7.1 &DNG converter successfully. I have a new Sony Alpha 7 11 model ILCE-A7M2 that is supported by LR5. I am still not able to see the RAW pictures. The message says preview unavailable for this file DSC-ARW. Whatelse I should be doing to see my pictures? Can someone help?
Anita

The support for that camera was added in the very latest release of Lightroom, version 5.7.1. Having downloaded Camera Raw 8.7.1 will have no effect on Lightroom because Lightroom doesn't use the Camera Raw plug-in. You need to make sure you have updated Lightroom to the very latest release in order to have support for that camera.

BI Publisher: not able to see the xml data after creating a data model

I am learning BI publisher and trying to create a report data model
I created a new data model from the report tab, use query builder, able to see the results. Then i save it and try to launch XML view from clicking View .
I am getting unexpected exception, not able to see the XML view .
in the server console i got servlet exception, here is one of the line
com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303
Edited by: joysaha123 on Mar 17, 2010 6:07 PM

Hi karthik
Thanks for your response
Actually iam a beginner in java coding hence struggling to come up with the things
I tried putting your code and onserver side i see it is returning 09:12:17,234 INFO [STDOUT] [root: null]
actually the same program i wrote in java
and the same method i was calling from the main
and it is working fine and the xml document is getting displayed one important thing to be noted here is that the factory.newDocumentBuilder().parse(new File(filename));is returing XmlDocument
and the printing takes place
but the in same method public static Document parseXMLFile(String filename, boolean b) in servlet
the line factory.newDocumentBuilder().parse(new File(filename)); is returning DeferredDocumentImpl
and this creating problem , had it returned XmlDocument
i would have printed the elements one one
but as it is returning deferredimpl
iam unable to print the elements
could you please tell me why factory.newDocumentBuilder().parse(new File(filename)); is returning DeferredDocumentImpl
in servlets but in plain java pogram it is returing XmlDocument
Thanks
Bhanu

Not able to see the content of opened files (.jpg or .psd) in Photoshop CS6

I recently downloaded Adobe Design and Web Premium CS6. I am not able to see the content of any of the file I open (.psd or .jpg). I do see the file has been opened as the file name appears on the open file tabs, I also see the preview of the file in the Navigator Window and list of layers in the layers window. I am relatively new to this so might be missing on some option that needs to be turned on or something.
I am using Window 7 Professional, Service Pack 1, with 8GB RAM.
Any suggesstion/help is greatly appreciated.

This is going to be the weak point:
Intel(R) HD Graphics card
While the Intel HD chip is fine for general computer work, it is weak for programs, like Photoshop and Adobe Premiere. The driver support is usually very bad, as well. If Lenovo does not have updated drivers, that work better, about the only choice that one has with a laptop is to turn OFF graphics accleration, and wait for a new driver. That will probably be very slow in coming.
Good luck,
Hunt
PS - Noel's link will list what you are missing.

HT1918 why i am not able to see the none option in the payment link?

why i am not able to see the none option in the payment link?

Did you create a new account using an email address not used with Apple before?
Maybe your county does not allow a None.
I am in the US and created a None account using those instructions.

We are facing issue to open a static form PDF in Chrome Browser , which is loaded using Adobe FormService.Able to open in other browsers but not able to open the static forms in chrome with LC 11.0 version

We are facing issue to open a static form PDF in Chrome Browser
, which is loaded using Adobe FormService.
Able to open in other browsers but not able to open the static
forms in chrome with LC 11.0 version
Below error message:
The document you are trying to load
requires Adobe Reader 8 or higher. You may not have the Adobe Reader installed
or your viewing environment may not be properly configured to use Adobe Reader.
For information on how to install Adobe Reader and configure your viewing
environment please see http://www.adobe.com/go/pdf_forms_configure.
Please let us know do we have any option for disabling
<NoXFA/> tag by calling formService. RenderPDF() method on adobe service
For dynamic forms its working by adding <NOXFA/> in
DDX xml . only for static forms its not working because we are not using
assembler service for this forms.
Please let us know how we can disable XFA in static forms??????????????????

If anyone is reading this still looking for what caused the issue and how to fix it here is what I discovered.
The antivirus program our company uses, Bitdefender Antivirus Plus, was causing some of the PDF files not to open. After troubleshooting the different modules and settings the culprit was..
Scan SSL in Privacy Control Settings. Turning it OFF solved the problem and all the PDF files that previously would not open now open just fine. This issue has been sent to Bitdefender for them to review. If you use a different antivirus program and are having this issue try locating the Scan SSL setting and see if turning it off solves the problem.

I am not able to see the installed BI content object in the DWB

Hi ,
I am not able to see the installed BI content object in the DWB
and the BI server is new one, this is the First BI content info object I am installing.
for example I have selected 0Account BI content info object for installation
I followed the below steps for installation.
1 Drag and drop of 0Account info object in right side window.
2.Grouping option selected as only necessary objects.
3.collection mode selected as manual collection then executed using execuiton button.
4.selected the install all below option.
5.finally installed the object with install in background option.
job got finished successfully.
please let me know if I did any thing wrong and please post valuable suggestions.
Regards.
Srinivas

HI
If yor installing first time you have to select info area and object catalogs also else it will go and stored in unassigned nodes. whatever your doing the option for installing the business content everything is same, but in right hand side panesl select the info ares etc.
regards,
Chandra.

I am not able to see the data By request id in ODS

HI Gurus,
I am trying to do data loads from flatflies based on Region to ODS(We have flat files based on region for each region we have one flatfile) .I have loaded 2 files into ods.But when i am checking the data in ODS by request id .I am seeind 2 regions data on one request id .I am not able to see the data for other request id.
For example:
We have two flat files one is region 1: 5100 and region 2: 5030
Request id 1: contains region 5100 data
request id 2 : contains region 5030 data.
But when i am checking the data in ODS its showing 5100&5030 data onn request id 1.I am not seeing any data for requestid 2.
Please help me out.

Hi,
Active data cant be seen by Request id but definitely change log table contains request id and list of records per request
Go to Manage ---> Contents tab --> New Data. Over here you can enter the request number and check the data request wise.....The same can be done for Change log
Check the log in SM37 if it exists there or not.
May be the number of records will be more and depending upon the system processses it will be taking time to load.ID request is loaded to ODS then it could be activation time
Hareesh

HT2534 i am not able to see the payment option none

i am not able to see the payment option none while using my apple id for the 1st time in itunes store

Did you create a new account using an email address not used with Apple before?
Maybe your county does not allow a None.
I am in the US and created a None account using those instructions.

Not able to see the data in the report

Hi All
      In my cube i am having data.But when i am running the report ,i am not able to see the data.
    The error its throwing is -No Applicable data found.
    what could be the problem,please provide me the idea to solve the problem.
Thanks&regards
syam prasad dasari

HI,
See that any restrictions are there in the report(Filters)....Give the same restrictions in Listcube and see if you are getting data or not.....
Thanks

Not able to see the tree on the jspx page after running

Hi All,
This is something strange.I am dragging the VO on the page fragment from the data control as adf tree. And I am using the panel collection as component for adf tree.
After running the jspx when I am moving to the fragment I am not able to see the tree.
However when I am running the AM it is working properly for the view objects and view link used to populate the tree.
Can anybody put some thoughts on this.
Thanx
Kanika

Thnx for your replies..
I am dropping taskflow as region . I am not using the switcher component.
On left side of the page the tree is visible now. but the taskflow is not refreshing on the click of the tree node based on the value of the node.
Please advice how to accompolish this now??

Report exection problem for one user - not able to see the data.

Hello Friends ,
Need some help . I have got the one ticket from bussniess side about the report execution .
Unfortunately , I am also not having authorisation of that report due to sensible data.
Problem - User is executing the report but some how he is not ABLE TO see the data for one company code Hierachy .
I executed the same report through RSSMQ via his user id , and I got the below message.
All value were selected . Hierachy Authorisation cannot be used.
A displayed hierachy requier a hierachy authorisation .
But when i checked his authorisation , I am able to see that he should have authorisation to all the hireachy .
could you please let me know , how can I check more ?
Regards,

after accessing the report , u go to su53 tcode and check the authorization and u can see what is problem in authorization for the that user and u can send the details to secuity team to rectify the issue ,

Not able to see the result in particular column of BPC report

Dear All,
I have problem in one of the BPC report where I am not able to see the result into one column but rest of the users are able to see the result for same column in same report without any issues.
Generally, I used this report frequently but having such problem from last few days. Excel has created any logs which I need to clear? Please advice.
Request your help to resolve such problem please.
If you need any information, please let me know.
Thank You
Kind Regards
Anukul

Hello Anukul,
In the report what type of data you are trying to check in that column. can you please brief about report.
And also please check the excel cell format (right click and check it is a numeric or character), which may help to resolve this issue.
Regards,
Rajesh.K

I am not able to see the valeus in the report on multiprovider.

Hi Gurus,
I have loaded an infoobject Document currency0DOC_CURRCY into DSO and assigned a constant "USD" to it and I am able to see that value in DSO through the display data.
Later I moved the DSO into multiprovider by loading the 0DOC_CURRCY in to multiprovider and wrote a query on it.
But I am not able to see the values for 0DOC_CURRCY in the report.
Why I am not able to see the valeus in the report which is executing on the multiprovider.
PLs help me with a solution.

Hi,
First step is to checck the data in the ODS.
Second is, You use Identify Characteristics and Select Key Figures to make InfoObject assignments between MultiProviders and InfoProviders.
If this is checked you 70 % of the job is Over in your creating multiprovider.
For more information
http://help.sap.com/saphelp_sm40/helpdata/en/cf/bc734190ba137de10000000a155106/content.htms
santosh

Not able to see the new form in Portal

Similar Messages

Maybe you are looking for