Not able to see the option Export and Import Workflow(Task) in 4.6 System

I have some  custom workflows in 4.6 system, and i need to copy this workflow from 4.6 and move  to Ecc 6.0 and i was looking for the option Export/Import Workflow  in 4.6 but i did no see that option.Could you any one tell is there any other option where i can copy and move to ECC 6.0

Hi
  I think before you move or upgrade workflow Please go through the
1. [Document 1|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/103b1a61-294f-2a10-6491-9827479d0bf1?QuickLink=index&overridelayout=true]
Regards
Pavan
Edited by: Pavan Bhamidipati on Nov 10, 2011 12:43 PM

Similar Messages

  • I'm using Iphone 5 .After updating it with the latest software i.e iOS 7.0.6 I'm not able to see the wats app and imsg on my notification until and unless i activate the "Show on Lock Screen" which was not same as in the earlier software version.Help plz

    I'm using Iphone 5 .After updating it with the latest software i.e iOS 7.0.6 I'm not able to see the wats app and imsg on my notification center when my phone is locked until and unless i activate the "Show on Lock Screen" under each application. which was not same as in the earlier software version.I dnt want my messages or watsapp msges to be displayed on home screen when locked but should be displayed on the notification center on lock condition.
    Please suggest a solution or @Apple please get a software release which can remove this bug .

    We aren't Apple, just users like you. Have you tried a reset? Hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss)

  • Not able to see the history period and data

    Hello
    I have 2 time planning bucket periods - history of 24 months and future 14 months.
    have assigned both in the data view.
    i have loaded the data from infocube to planning area and i got the successful message.
    during the transfer i have used the key figure assignment feature and used my key figure which is zhistory.
    i have not used 9AVHISTORY.
    my issue is i am not able to see the history periods and hence not able to see the data in history.

    Hi
    The data get loaded and its also available in the planning area, as you defined the time bucket profile according it  i.e.24 month in past and 14 month in future. Its only while definition of data view you have not defined these flags you were unable to view this data.
    Hence as I mentioned data has correctly loaded in the planning area just not getting viewed.
    I hope this answers your question.
    Thanks
    Amol

  • I accidently changed the format of my Mozilla firefox so that the top part of my wall paper is showing I want the whole page to be the browser but I do not want to use the f11 option so that I am not able to see the top toolbar and i have no idea how

    The part above the tabs shows my wallpaper and I have no idea how to change it back to what it was like before.
    Thanks

    First of all, Excel file can't save to iBook.  (iBook only can view PDF files). That's why you don't see it in "open in" options.  In order for you to save excel, you will need a third party app like Numbers, Office2.  There are a few free apps that can use to view.  I used Office2 from Byte2, because I can not only store and view later, I can do some edit too.  Especially when you want to edit a few numbers and re send them to my office or clients will be very useful for me. 

  • I am not able to use the ftp export in Muse. When I enter my host, name and password, I get a long interlude of rainbow wheel and finally the message that my ftp host cannot be found. I have verified the name and that it is port 21. I can export to html a

    I am not able to use the ftp export in Muse. When I enter my host, name and password, I get a long interlude of rainbow wheel and finally the message that my ftp host cannot be found. I have verified the name and that it is port 21. I can export to html and use another ftp client to upload (to the same server) but this is tedious and making minor changes is painful. Have you encountered this and found a solution?

    Hi Susan,
    In that case I will recommend that you consult a local technician/IT team and see if there is some network connectivity issue with your machine.
    - Abhishek Maurya

  • HT1918 why i am not able to see the none option in the payment link?

    why i am not able to see the none option in the payment link?

    Did you create a new account using an email address not used with Apple before?
    Maybe your county does not allow a None.
    I am in the US and created a None account using those instructions.

  • HT2534 i am not able to see the payment option none

    i am not able to see the payment option none while using my apple id for the 1st time in itunes store

    Did you create a new account using an email address not used with Apple before?
    Maybe your county does not allow a None.
    I am in the US and created a None account using those instructions.

  • Not able to see the crystal reports XI version in the IE 7 and IE 8

    Hi Team,
    I am using web based application developed in VB,ASP,SQL SERVER,Crystal Reports(XI). I am able to see the Crystal Reports in IE 6. But i am not able to see the reports in IE 7 and IE 8. While clicking on the reports button it is showing the  red X image top left cornor.
    I am using CrystalActiveX viewer11 version for viewing the reports.
    In IE 6,if the client using fiirst time for vieiwing the reports,it will ask the Activexviewer control prompt and says ok,it will display the reports.
    Thanks and Regards
    Eshwar

    Thanks your advise.But we are using following crystal reports (XI) version and we don't have CRXI with R1 and R2.
    CurrentVersion:11.0.0.895 ( CR Developer and Product Type:Full)
    Crystal Reportviewer11 configured in the IIS which is version (5.0). and configured the virtual folder to C:\Program Files\Common Files\Business Objects\3.0\crystalreportviewers11\.
    Our web application code also configured in the IIS at same level.
    When the user wants to see the reports through the application,it will ask the Plugin of Crystal Report Viewer and user will download this plugin and it will save in the IE plug ins.It will ask only first time viewing the reports for the next onwards it will not ask or prompt of the Activex control.
    So please suggest me, is there any upgrade version of this Crystal Reportviewer11 needs to be installed or any browser setting need to be configured for IE 7 and IE 8.
    waiting for your reply.
    Regards
    Eshwar

  • I have Photoshop Lightroom 5 and have downloaded Camera Raw 8.7.1 &DNG converter successfully. I have a new Sony Alpha 7 11 model ILCE-A7M2 that is supported by LR5. I am still not able to see the RAW pictures. The message says preview unavailable for thi

    I have Photoshop Lightroom 5 and have downloaded Camera Raw 8.7.1 &DNG converter successfully. I have a new Sony Alpha 7 11 model ILCE-A7M2 that is supported by LR5. I am still not able to see the RAW pictures. The message says preview unavailable for this file DSC-ARW. Whatelse I should be doing to see my pictures? Can someone help?
    Anita

    The support for that camera was added in the very latest release of Lightroom, version 5.7.1. Having downloaded Camera Raw 8.7.1 will have no effect on Lightroom because Lightroom doesn't use the Camera Raw plug-in. You need to make sure you have updated Lightroom to the very latest release in order to have support for that camera.

  • Replacement Needed. This iphone is not able to complete the activation process and needs to be replaced. Please visit your nearest apple store or authorized service center.

    Probably will never ever think of buying a locked phone from AT&T cause its one of the worst system integrations ever that these companies could think of.
    The entire problem started when I put in a request with at&t to unlock my iphone 4s (ios7) which did get approved. I performed the entire instructions they asked me to do, which is to backup and restore. After doing those instructions my iphone gave me an error message below
    The SIM card inserted in this iPhone does not appear to be supported.
    The SIM card that you currently installed in this iPhone is from a carrier that is not supported under the activation policy that is currently assigned by the activation server. This is not a hardware issue with the iPhone. Please insert another SIM card from a supported carrier or request that this iPhone be unlocked by your carrier. Please contact Apple for more information.
    Basically saying that at&t hasn't still unlocked the iphone which a really helpful apple executive was able to confirm. I initiated another unlock process from at&t in order to unlock the iphone, just to be sure that its not something wrong from my end. The nice at&t lady stayed on chat with me to unlock the iphone step my step while I was calling the apple tech too. And the apple tech confirmed again that the iphone is locked to at&t.
    Now, just a few minutes ago I tried another restore to see if any progress is being made and to my surprise I got an error message saying
    Replacement Needed. This iphone is not able to complete the activation process and needs to be replaced. Please visit your nearest apple store or authorized service center.
    I feel like I am just going around these two different "money hogger" companies which set certain rules and regulations to screw a regular phone buyer. I purchased this iphone in USA and trying to unlock in India, is it really this hard to simply unlock a device.
    For now I am going to try to call a apple office in india (apprently we don't have very many out here) and see if they can help me. But any other assistance regarding unlocking an iphone 4s would be helpful. I have however, tried checking IMEI.info, called up apple, talked to at&t (which always say go talk to apple) I do have a case number from apple as well in case an apple executive reads this discussion forum (case number: 566383594)
    Thanks

    You got a confirmation from AT&T that it was authorized. Is this correct? - Yes i did get an email authorization on the 21st.
    Then you connected the phone to a computer with the latest version of iTunes installed. You clicked on the phone's name in iTunes, then clicked "Backup Now". - Yes
    When that finished you clicked "Restore iPhone" (NOT "Restore Backup") - Yes
    Are you with me so far? - Yes.
    And @ Varjak is right that after the 3rd restore I get the replacement error. 
    Plus I have NEVER jailbroken the iPhone. To give you another update, I spoke to a really nice apple tech in India who was atleast able to get me out of the replacement error by doing a recovery mode option. However, the lastest restore still gives me the same error
    The SIM card inserted in this iPhone does not appear to be supported.
    The SIM card that you currently installed in this iPhone is from a carrier that is not supported under the activation policy that is currently assigned by the activation server. This is not a hardware issue with the iPhone. Please insert another SIM card from a supported carrier or request that this iPhone be unlocked by your carrier. Please contact Apple for more information.
    Message was edited by: jabgars

  • Not able to see the content of opened files (.jpg or .psd) in Photoshop CS6

    I recently downloaded Adobe Design and Web Premium CS6.  I am not able to see the content of any of the file I open (.psd or .jpg).  I do see the file has been opened as the file name appears on the open file tabs, I also see the preview of the file in the Navigator Window and list of layers in the layers window.  I am relatively new to this so might be missing on some option that needs to be turned on or something. 
    I am using Window 7 Professional, Service Pack 1, with 8GB RAM.
    Any suggesstion/help is greatly appreciated.

    This is going to be the weak point:
    Intel(R) HD Graphics card
    While the Intel HD chip is fine for general computer work, it is weak for programs, like Photoshop and Adobe Premiere. The driver support is usually very bad, as well. If Lenovo does not have updated drivers, that work better, about the only choice that one has with a laptop is to turn OFF graphics accleration, and wait for a new driver. That will probably be very slow in coming.
    Good luck,
    Hunt
    PS - Noel's link will list what you are missing.

  • I am not able to see the Personal Hotspot in my iPad mini

    I am not able to see the Personal Hotspot in my iPad mini. I have a 3G account and I can´t share it because I can´t find the option Celullar into Settings --> General. Do you have any clue??
    Thanks!
    Pablo

    Hello!! thanks for your answer!!!
    I called them and they told me that my plan hasn´t any limitation... If I use this nanosim card on my iPhone I can see that option enabled... :-S
    Thanks!
    Pablo

  • Not able to see the Adapters@Integration Directory!!

    Hi,
    I have created Data types,Messages Types, Message Interface in Integration Repository.
    I have created a scenario in Directory and assigned Business systems too(I'm doing file to file scenario) and while trying to create Communication channels i'm unable to see the adapters under Parameters Tab.
    <b> Its not showing any Adapters in ADAPTER TYPE option and also
    Transport Protocol and
    Message Protocol are blank.</b>
    What could be the reason??
    Please guide me in order to complete my scenario.
    Thanks in Advance.
    LNM

    hi madduri,
    check these links....
    Not able to see the adapter types in ID
    Adapter Engine not found in ID
    <b>check the last post here.... u will get ur answer !!!</b>
    Adapter Type not found
    Do these steps
    1) Download XI7_0_SAP_BASIS_7.00_10_00.tpz which is available in a zipped format from the SAP Service Market Place.
    2) Unzip the contents and copy the file XI7_0_SAP_BASIS_7.00_10_00.tpz (if you are using PI 7.0 or else download the file for your XI version) to
    /usr/sap/<SAPSID>/SYS/global/xi/repository_server/import/
    3) Goto Repository (Design)
    4) Choose -> Tools -> Import Design Objects
    regards
    BILL
    **mark the thread  answered when u got ur answer

  • I am not able to see the installed BI content object in the DWB

    Hi ,
    I am not able to see the installed BI content object in the DWB
    and the BI server is new one, this is the First BI content info object I am installing.
    for example I have selected 0Account BI content info object for installation
    I followed the below steps for installation.
    1 Drag and drop of 0Account info object in right side window.
    2.Grouping option selected as only necessary objects.
    3.collection mode selected as manual collection then executed using execuiton button.
    4.selected the install all below option.
    5.finally installed the object with install in background option.
    job got finished successfully.
    please let me know if I did any thing wrong and please post valuable suggestions.
    Regards.
    Srinivas

    HI
    If yor installing first time you have to select info area and object catalogs also else it will go and stored in unassigned nodes. whatever your doing the option for installing the business content everything is same, but in right hand side panesl select the info ares etc.
    regards,
    Chandra.

  • Not able to see the TPZ files

    Hi,
    Please help.
    I am facing a problem while transporting a request to Production environment. I am using File Level Transport. When I create a transport file, it is successfully created in development system's /export location. Basis team moves the file production system's /import directory.
    But here I am not able to see the imported  tpzfile via Tool->import design objects , in Production environment.

    Hi,
    Please find below from sap help.
    After a successful import, the Integration Builder moves the imported TPZ files into the directory <systemDir>/xi/repository_server/importedFiles. The support package stack of imported software component versions is displayed on the Details tab page for the relevant software component version in the Integration Builder. If an error occurs, this information is important for support. Take one of the following precautions to retain the overview of the imported XI content:
    ●      If the release and the support package stack are clear from the file name of the TPZ file, simply leave the files in the directory importedFiles (see above).
    If a file with the same file name already exists in the directory importedFiles, the Integration Builder adds the date and time of the import to the file name of the imported export file. This enables you to check which file was imported last.
    ●      After a successful import, you can keep the packed files, from whose naming convention you can derive the support package stack. Move them into the directory importedFiles, for example.
    If version conflicts occur during the import, you can process and resolve them in the Enterprise Services Builder. In the case of corrupt export objects, you can force the import and skip objects that cannot be imported. The import is then incomplete and references to objects that are not imported are lost.
    Regards,
    Venkata S Pagolu

Maybe you are looking for