Not able to see the Person who posts reply and asked the question.

Hi,
I am facing issue with Posts in MSDN forum. I am not getting the name of Person who replied and asked the question which earlier used to come below the Post.
Are all facing the same issue? I am using IE 8 and Google Chrome 33.0.1750.117 m.
Can anyone please help.
One good question is equivalent to ten best answers.

I am using Google Chrome Version 33.0.1750.146 m (updated today). I am seeing names fine.
It may be also your connection speed and some extra add-on you have.
For every expert, there is an equal and opposite expert. - Becker's Law
My blog
My TechNet articles
My Google Chrome is also updated to 33.0.1750.146 m, and I am using high speed internet connection in my organization, but still I am not able to
see poster details. Even there is no data coming below
"Asked by:" section at Top left corner of MSDN Forum.
One good question is equivalent to ten best answers.

Similar Messages

Is there anyway to sort a shared photostream according to the person who posted to it?

The situation is, my family went to disney last month and took lots of pictures and shared them all to the same stream (iPhones and camera). I just want to import all the ones that are not mine (ie, they are not in the imported event or my own personal phootstream) without reimporting (duplicating) all the ones I shared. (on the mac) The stream is about 80% my own pics since I was in charge of the camera. Is there a way to sort them by the person who posted so that I can select theirs only? If not, when I import the photstream, will it recognize duplicates? Thanks in advance!

No. You can not sort PhotoStreams at all
Once the photos are imported into iPhoto you're can make smart albums based on camera
LN

No question, I just wanna say thanks to the person who discovered how to change the correct dns to use FaceTime. The 8.8.8.8. Really work. Genius. Thanks again.

No question, I just wanna say thanks to the person who discovered how to change the correct dns to use FaceTime. The 8.8.8.8. Really work. Genius. Thanks again.

solved

Why users are not able to see certain printers even though they are in the Airgroup server table

Q: Why users are not able to see only certain printers even though they are in the Airgroup server table ?
A: In certain scenarios we may notice printers come up under the server /cache entries on the controller.
However when an airgroup user does search for printer, they may not see all the printers, certain printers may be not visible .
This is because the service IDs sent by the user in the MDNS query are not broadcast by these printers
In the below capture the Ipad sends query for service id "_universal_sub_ipp_tcplocal" and "_universal_sub_ipps_tcplocal" and hence the controller will
respond with the printers that broadcasts these service ids.
Non–Visible printer :
_printer._tcp.local PTR IN 7200 10.125.30.223 5820.05 Wed Mar 18 13:24:26 2015
_pdl-datastream._tcp.local PTR IN 7200 10.125.30.223 6112.25 Wed Mar 18 13:24:26 2015
_ipp._tcp.local PTR IN 7200 10.125.30.223 5888.15 Wed Mar 18 13:24:26 2015
_http._tcp.local PTR IN 7200 10.125.30.223 6293.88 Wed Mar 18 13:24:26 2015
NPIED487E.local A IN 240 10.125.30.223 194.43 Wed Mar 18 13:24:26 2015
hp LaserJet 4250 [ED487E]._printer._tcp.local SRV/NBSTAT IN 240 10.125.30.223 209.87 Wed Mar 18 13:24:26 2015
hp LaserJet 4250 [ED487E]._printer._tcp.local TXT IN 240 10.125.30.223 205.14 Wed Mar 18 13:24:26 2015
hp LaserJet 4250 [ED487E]._printer._tcp.local TXT IN 240 10.125.30.223 197.18 Wed Mar 18 13:24:26 2015
hp LaserJet 4250 [ED487E]._printer._tcp.local TXT IN 240 10.125.30.223 196.42 Wed Mar 18 13:24:26 2015
hp LaserJet 4250 [ED487E]._printer._tcp.local TXT IN 240 10.125.30.223 208.15 Wed Mar 18 13:24:26 2015
hp LaserJet 4250 [ED487E]._pdl-datastream._tcp.local SRV/NBSTAT IN 240 10.125.30.223 207.35 Wed Mar 18 13:24:26 2015
hp LaserJet 4250 [ED487E]._pdl-datastream._tcp.local TXT IN 240 10.125.30.223 200.64 Wed Mar 18 13:24:26 2015
hp LaserJet 4250 [ED487E]._ipp._tcp.local SRV/NBSTAT IN 240 10.125.30.223 209.44 Wed Mar 18 13:24:26 2015
Visible-printer :
_printer._tcp.local PTR IN 4500 10.125.26.29 3745.82 Wed Mar 18 13:24:51 2015
_universal._sub._ipp._tcp.local PTR IN 4500 10.125.26.29 3694.14 Wed Mar 18 13:24:51 2015
_ipp._tcp.local PTR IN 4500 10.125.26.29 3628.81 Wed Mar 18 13:24:51 2015
_pdl-datastream._tcp.local PTR IN 4500 10.125.26.29 3616.14 Wed Mar 18 13:24:51 2015
_http._tcp.local PTR IN 4500 10.125.26.29 3793.56 Wed Mar 18 13:24:51 2015
XRX9C934E25C52D.local A IN 120 10.125.26.29 355.03 Wed Mar 18 13:24:51 2015
Xerox WorkCentre 3615 (25:C5:2D)._printer._tcp.local SRV/NBSTAT IN 120 10.125.26.29 130.45 Wed Mar 18 13:24:51 2015
Xerox WorkCentre 3615 (25:C5:2D)._printer._tcp.local TXT IN 4500 10.125.26.29 3670.33 Wed Mar 18 13:24:51 2015
Xerox WorkCentre 3615 (25:C5:2D)._ipp._tcp.local SRV/NBSTAT IN 120 10.125.26.29 389.55 Wed Mar 18 13:24:51 2015
Xerox WorkCentre 3615 (25:C5:2D)._ipp._tcp.local TXT IN 4500 10.125.26.29 3640.60 Wed Mar 18 13:24:51 2015
Xerox WorkCentre 3615 (25:C5:2D)._pdl-datastream._tcp.local SRV/NBSTAT IN 120 10.125.26.29 210.97 Wed Mar 18 13:24:51 2015
In order to learn other printers we may need to use specific app provided by printer vendor on the client or configure the printers to send these service IDs.

The net 451 issues made it not work after a while but it affected the entire RWW site not just remote access:
http://blogs.technet.com/b/sbs/archive/2014/01/13/troubleshooting-an-unexpected-error-occurred-message-when-using-remote-web-access-to-connect-to-computers.aspx
Careful if you try and uninstall it, you'll need to put back net 4.0 and reconfigure some stuff.
Did it ever work?
Make sure the users have installed the certificate they need and turn on compatibility mode in IE (also make sure IE isn't locked down and disabling activeX).:
https://technet.microsoft.com/en-us/library/dd701173%28v=ws.10%29.aspx?f=255&MSPPError=-2147217396
-- Al

I am trying to communicate with third party instrument via usb but I dont know how to do it even in Ni-max I am not able to see usb port symbol in Devices and Interface section.

hello,
I am tring to communicate my Powersupply which is not from Ni via USB cable ,but I am not able to see my connection or usb symbole in Ni-max .
first time I am using this will you please guide me,and is there any driver i need to download for that?here I put one attachment regarding to this.
Thanks in advance.
Solved!
Go to Solution.
Attachments:
usb is not detected.png ‏182 KB

ya I know that,
thats y i asked you that y it is so because i am not able to see that usb port here i can see that much only.
thats y i got confused.
and I can see my hameg connection in my control panel and also in device manager.
http://www.hameg.com/drivers.0.html?&no_cache=1
this is website for hameg driver in that product select hmp4040 than hmp4000 list will open in that i have download third one in which plug and play is given.
or here i send my vi it might be helpful.
Attachments:
hmp4040 Output DC Volts.vi ‏17 KB

Hi i lost my phone yesturday and i was wondering how to i blacklist my iphone meaning that the person who has it cannot use the phone anymore

i was wondering how to blacklist my phone as i lost it and ive tracked it to an address but i dont want the phone in use anymore i want to make ure the phone is blocked

Contact your service provider. Only they could do that.
What To Do If Your iDevice Is Lost Or Stolen
If you activated Find My Phone before it was lost or stolen, you can track it only if Wi-Fi is enabled on the device. What you cannot do is track your device using a serial number or other identifying number. You cannot expect Apple or anyone else to find your device for you. You cannot recover your loss unless you insure your device for such loss. It is not covered by your warranty.
If your iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should have done in advance - before you lost it or it was stolen - and some things to do after the fact. Here are some suggestions:
This link, Re: Help! I misplaced / lost my iPhone 5 today morning in delta Chelsea hotel downtown an I am not able to track it. Please help!, has some good advice regarding your options when your iDevice is lost or stolen.
1. Reporting a lost or stolen Apple product
2. Find my lost iPod Touch
3. AT&T. Sprint, and Verizon can block stolen phones/tablets
4. What-To-Do-When-Iphone-Is-Stolen
5. What to do if your iOS device is lost or stolen
6. 6 Ways to Track and Recover Your Lost/Stolen iPhone
7. Find My iPhone
8. Report Stolen iPad | Stolen Lost Found Online
It pays to be proactive by following the advice on using Find My Phone before you lose your device:
1. Find My iPhone
2. Setup your iDevice on iCloud
3. OS X Lion/Mountain Lion- About Find My Mac
4. How To Set Up Free Find Your iPhone (Even on Unsupported Devices)

To the apex team (wiki, blog and ask the expert)

Dear fellows,
Can you give an indication when wiki, blog and/or ask the expert applications will be available.
I'm looking forward ......
Best regards.
Leo

I was able to do this by logging in with FTP. I deleted contents of the "Collaboration" folder, restarted and set up my sites. It all worked like new.

Not able to see My number its is locked and my facetime is not working?

Hi,
I bought an an I phone4S from Vodafone in qatar and i am using with another carrier Q tel I am unable to use the following features on my phone:
My phone and facetime with my Network provider when i put the Vodafone's card these work so can someone help me in this?
Regards

See also: Apple Tells Us Exactly Where FaceTime Is Not Available

I bough a Mac Pro 2010 second hand and deleted all the files without backing up now is asking me for the Apple ID of the person who installed maverick,any ideas

I bough a Mac Pro 2010 second hand and deleted all the files without backing up now is asking me for the Apple ID of the person who installed maverick,any ideas

If the Mac's firmware was updated, you can try this Internet Recovery:
Hold down Command + Option + R during restart or bootup; hold until you see a spinning globe (takes up to 10 minutes). Once in the Utilities window, use Disk utility to wipe the drive, then return to the window and choose to reinstall OS X. If that works, the OS will be installed without being tied to an Apple ID.
FWIW, if the firmware was updated, you will not be able to use the Snow leopard disk to install - I just did several tests and it does not work. You can, however, possibly install the SL onto an external drive and then clone it to the internal or (if you have a clone), boot from that and clone it back - I just tested that as well.
If the firmware was not updated, then you can use the SL install disk.

Urgent help of the person who coded this...

could the person who posted this code pls get back to me..cuz i can't seem to find u
cuz i would like to use this code of urs but i'm not sure exactly how it works out.
import java.awt.*;
public class DrawArrows
     public void drawArrow(Graphics g,int x1,int y1,int x2,int y2,int headLength,int headwidth)
     double theta;
     double theta2;
     int deltaX;
     int deltaY;
     int lengthdeltaX;
     int lengthdeltaY;
     int widthdeltaX;
     int widthdeltaY;
          deltaX=(x2-x1);
          deltaY=(y2-y1);
          theta=Math.atan((double)(deltaY)/(double)(deltaX));
     if(deltaX<0.0)theta2=theta+Math.PI;
     else theta2=theta;
     lengthdeltaX=-(int)(Math.cos(theta2)*headLength);
     lengthdeltaY=-(int)(Math.sin(theta2)*headLength);
     widthdeltaX=(int)(Math.sin(theta2)*headwidth);
     widthdeltaY=(int)(Math.cos(theta2)*headwidth);
     g.drawLine(x1,y1,x2,y2);
     g.drawLine(x2,y2,x2+lengthdeltaX+widthdeltaX,y2+lengthdeltaY-widthdeltaY);
     g.drawLine(x2,y2,x2+lengthdeltaX-widthdeltaX,y2+lengthdeltaY+widthdeltaY);
}i could only work out till the line
                                           deltaX=(x2-x1);
          deltaY=(y2-y1);
          theta=Math.atan((double)(deltaY)/(double)(deltaX));    pls let me know if u are still reading this or anyone else who can figure out the later part of the code.
thnx n cheerz

i could only work out till the line
deltaX=(x2-x1);
deltaY=(y2-y1);
theta=Math.atan((double)(deltaY)/(double)(deltaX));
I'm not the poster but these lines seem to compute the
angle of the arrow line.
BTW (to the posters): wouldn't the use of a
Polygon be better suited for this purpose ?Looks indeed like it is calculating the angle to the origin of a line segment.

Not able to see backend material document number in SUS

Hi,
A GR is created in ECC. It is avaiable for disply in the supplier's login. We are able to achieve this.
The question is "We are not able to see backend (ECC) material document number anywhere on the screen. We are only able to see the SUS Confirmation number (i.e. as per the number range assigned to BUS2233). Is it standard behavior?
Details: SRM7.0 SP07, ECC Ehp4, Using MM-SUS. Plan driven procurement.
Ganapathi

Dear Manjunath,
Thanks for the response.
We have noticed that, the back end (ECC) material documents are getting replicated to SUS as we are able to see this number in BBP_PD & BBP_PDBEH-BE_OBJECT_ID.
So, let me put the question this way.
Our issue is with display of document in the portal (BSP Pages).
For Example, in case of Invoice, the supplier can see the back end MIRO invoice document number with the "External Reference" Label, under Basic Data section. The case is NOT same with GR. The back end (ECC) material document number is NOT seen any of the layout (for end user, who has logged in as supplier).
Is it standard behavior? If we want that, the suppliers should be able to see the material document number in the portal, when a GR is created in ECC, what settings we have to do?
Ganapathi

Not able to see task of BPM process in UWL

Dear all,
I am not able to see my task in Portal UWL and getting an error in UWL workset saying, an error occured while trying to connect to provider and detail message says - Unexpected error occured: XMLParser: No data allowed here (:main:, row:6, col:2)
In the Portal Log i can see following error message -
process()
[EXCEPTION]
com.sap.engine.interfaces.webservices.runtime.ProtocolExceptionExt: Authentication failed. For details see log entry logID=0021288C0230293F0000000500006EB3 in security log.
at com.sap.engine.services.wssec.srt.protocols.ProviderSecurityProtocol.logThrowable(ProviderSecurityProtocol.java:1178)
at com.sap.engine.services.wssec.srt.protocols.ProviderSecurityProtocol.handleRequest(ProviderSecurityProtocol.java:527)
at com.sap.engine.services.webservices.espbase.server.runtime.ProtocolProcessor.protocolsHandleRequest0(ProtocolProcessor.java:95)
at com.sap.engine.services.webservices.espbase.server.runtime.ProtocolProcessor.protocolsHandleRequest(ProtocolProcessor.java:70)
at com.sap.engine.services.webservices.espbase.server.runtime.RuntimeProcessingEnvironment.preProcess(RuntimeProcessingEnvironment.java:483)
at com.sap.engine.services.webservices.espbase.server.runtime.RuntimeProcessingEnvironment.process(RuntimeProcessingEnvironment.java:322)
at com.sap.engine.services.webservices.runtime.servlet.ServletDispatcherImpl.doPostWOLogging(ServletDispatcherImpl.java:199)
at com.sap.engine.services.webservices.runtime.servlet.ServletDispatcherImpl.doPost(ServletDispatcherImpl.java:65)
at com.sap.engine.services.webservices.servlet.SoapServlet.doPost(SoapServlet.java:61)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:754)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:847)
I am using Portal 7.2 with SP level 08.
Thank and Regards,
M.D.Sahu

Hi Mithileshwar,
Start BPM Process Trigger - Read timed out
Regards,
V Srinivasan

Activation screen and asks the previous owner's Apple ID and password

Hello
case 45548
I have a problem with the activation of my iPhone 4S. I bought an iPhone in the store half a year ago used as a simple phone And then about a week ago I updated the IOS 7.0.4. After updating the iPhone has activation screen and asks the previous owner's Apple ID and password I do not know of any Apple ID or password, I had no contact with him. I can not use my iPhone for a week. I am so disappointed with this situation. Can you help me to disable this feature, please?
Serial number of my mobile is DNQHW1XUDTD2 and IMEI is 013173000524538. I attach a photo box
Дело 45548
У меня есть проблема с активацией моих IPhone 4S. Я купил iPhone в магазине полгода назад использоваться как простой телефон, а затем около недели назад я обновил IOS 7.0.4. После обновления iPhone имеет экран активации и просит предыдущего владельца Apple ID и пароль, я не знаю любого идентификатора Apple, или пароль, у меня не было никаких контактов с ним. Я не могу использовать мой iPhone в течение недели. Я так разочарован с этой ситуацией. Вы можете мне помочь, чтобы отключить эту функцию, пожалуйста?
Серийный номер моего мобильного телефона является DNQHW1XUDTD2 и IMEI является 013173000524538. Я придаю фото окно

You're facing activation lock: http://support.apple.com/kb/TI174 and http://support.apple.com/kb/PH13695. You need to contact the previous owner and have them remove Find My iPhone using these steps: http://support.apple.com/kb/PH2702?viewlocale=en_US

HT3529 if you have a restriction on your iphone can the person who put the restriction on the phone be able to see who i text with the other persons email?

i want to text my friend who recently moved from out of state but i have a restriction and she has a new number, would the person who put my restriction on my phone be able to see who i text if i text her on her Imessage account or no? i really miss her!

There is some issue going on with multiple people related to the Facebook for BlackBerry notifications. You're not alone in that respect.
Not sure if the issue is with Facebook or the application, but I'm leaning towards Facebook since it's pretty much sucked on my PC the last several days, too.
http://www.blackberryforums.com/aftermarket-software/204335-facebook-oddities-sep-15-2009-a.html
If you find a post here helpful, please consider giving the poster some Kudos

I am able to see my ipod touch 5th geneneratio in find my iphone on icloud but it is showing offline.... i think its stolen but i have locked it with a passcode and the person who i suspect doesnt know it... i wana get it back what should i do??

i am able to see my ipod touch 5th geneneration in find my iphone on icloud but it is showing offline.... i think its stolen but i have locked it with a passcode and the person who i suspect doesnt know it... i wana get it back what should i do??

lost/stolen
No app on the iPod is required.
- If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected, on a computer browser go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up or conbtinue to show off-line.
- You can also wipe/erase the iPod and have the iPod play a sound via iCloud.
iCloud: Erase your device
iCloud: Use Lost Mode
- If not shown/shown off, then you will have to use the old fashioned way, like if you lost a wallet or purse.
- Change the passwords for all accounts used on the iPod and report to police
- There is no way to prevent someone from restoring the iPod (it erases it) using it unless you had iOS 7 on the device. With iOS 7, one has to enter the Apple ID and password to restore the device.
- Apple will do nothing without a court order
Reporting a lost or stolen Apple product
- iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number

Not able to see the Person who posts reply and asked the question.

Similar Messages

Maybe you are looking for