Not able to see video in facetime or any other video chat tool

I just bought a macbook pro(2011)... When ever I try to use facetime, I am not able to view the video of person in chat/conference... Though they are able to view my video...
This happens with google video (embedded in google chat) as well...
Any help? Thanks in advance...
I have tried after a software update as well...
Message was edited by: samkumar

You may have checked the Filter Check Box next to the Qualified Lookup cell in Data Manager, when the current table is the Main Table.
You use the Filter Checkbox to limit the qualified table records by the current search selections.
Secondly, you have see if there are any Qualified Links to the main table record you are viewing.
If not, create the Qualified links in Data manager, for the main table record and the Qualified Table Record.
Once this is done, you will see the Display fields of the Qualified table for which the links exists for the given main table record.
Message was edited by:
        Adhappan Thiagarajan

Similar Messages

  • When click on restore down button in firefox 32.0.3 the veritical scroll ba is missing and I am not able to view my gmail content or any other data properly..

    After openig Gmail or trying to search any information in google,when i click on restore down buton which is appear near close button,the vertical scroll bar is not showing,I have to maximize the window and then only I am able to view the hole content.

    You can check for problems caused by a corrupted localstore.rdf file.
    *http://kb.mozillazine.org/Corrupt_localstore.rdf

  • Not able to connect nokia lumia 510 with any other...

    Hi whenever I m connecting my Nokia lumia 51 with other mobile devices via Bluetooth it is showing not supported....please help me how can I connect to other mobile via Bluetooth

    try the post above yours.
    Using the search function and actually reading threads will reveal more that you may think..
    Click on the blue Star Icon below if my advice has helped you or press the 'Accept As Solution' link if I solved your problem..

  • Planner not able to see business rules

    Hi,
    I have given planner access to a user. And i have added validate and launch access to the business rule for that user. But after that when i login to worspace with that user i am not able to see the business rules.
    Any idea why is this happening?

    1. Have you added the location, in location tab?
    2. Are you able to see rules under Tools->BusinessRules?
    3. Is Admin is able to view rule?
    Cheers..!!!

  • SECATT - Not able to see the screen shots

    Hi All,
    I am trying to execute the SECATT for one of the testing of HR, but I am not able to see any of the screen shots in downloaded folder.
    While executing the test script I had selected the check boxes
    1) Save Screen shots
    2) Before User Inputs
    3) After user Inputs
    I am able to see the folder created after each executiion of the test script, but not able to see the screen shots in any format (like some of the blogs mention that screen shots will be in JPEG or in BMP format).
    We are on ECC6.0 EHP7 and we are using the sap GUI 730.
    Kindly Suggest.
    Regards,
    Umesh Chaudhari.

    Hi Umesh,
    I suspect that one of the below mentioned option is the reason for not getting the screen shots.
    1. It could be something to do with the SP level that you have.
    2. It could be because of a different path mentioned in Screenshot Path (default or user specific).
    3. The default path for the file containing the external variants is specified in the user-specific settings. 
    Procedure
      1.  From the menu in eCATT or the ABAP Workbench (transaction SE80), choose Utilities → Settings.
      2.  On the eCATT tab, choose the relevant tab and make the required changes.
    Path for Screenshots
    You can specify the default path for screenshots taken during the replay of SAPGUI commands.
    Regards,
    PB

  • When I go to create a new project in imovie using the iPhone 5, I am not able to see any of my video clips or photos that are saved on the device.

    When I go to create a new project in imovie using the iPhone 5, I am not able to see any of my video clips or photos that are saved on the device.

    When you move or copy the compound clips with their events into an external drive all the events should be there. Not clear on why you want to move them into a single event. You can drag and drop from one event to another.
    Why are you using compound clips? You can simply copy the project from each machine with used media onto the external drive and that should do it.

  • Not able to see recorded videos on Nokia 8mp 86

    Not able to see recorded vidoes on nokia phone 8 mp 86. Wherea as i can see them on picass or adobe .
    Tried all settings.
    Kinldy help out.
    Regards
    Pallavi

    Can you play 'em using the real player of your phone?

  • Apple TV and iTunes not able to see each other

    I think I have found a bug in either iTunes or Apple TV. My network configuration is a bit complicated so I will describe it first.
    Cable modem into my house hitting a Linksys WRT330N router at a central box in my laundry room. From there my house is hard wired to different rooms of the house. One goes to my office where I have a Apple Extreme N airport, connected to my PowerMac and my iTunes library. Again out of the central point in the laundry room again hard wired I have a wire going to my living room, where I have another Apple Extreme N airport, this is where my Apple TV is hard wired too. I have all the latest firmware and software installed on all my devices. Also both Airport Extreme's are setup using bridge mode and letting the Linksys serve the IP addresses for my network.
    Now to the problem. I can not explain when or why but my Apple TV and iTunes are not able to see each other after about 48 hours. I have tried all kinds of troubleshooting steps including changing my connection from being hard wired to wireless connecting directly to the Airport Extreme my iTunes computer is connected too. I know my network connection is good as I can see trailers and pull up video's from uTube.
    The only way to get them to see each other again is to do a factory reset of my Apple TV. After I do this they can both see each other again. But again after about 48 hours they lose the ability to see each other. I have taken these steps twice now to fix the problem
    I just finished reseting my Apple TV and am going to watch it to see when it stops working the next time.
    All of these problems started the other day when I introduced a new Apple Extreme N router in my my network. The airport Extreme seem to be working fine with my PS3 and XBox 360 that is also connected to it. So I don't think it's the router that is causing the problem.
    If I had to guess I would say something in the Apple TV is locking up. Although I have tried power cycling the Apple TV which does not fix the problem. I'm going through 3 routers to get between the Apple TV and the iTunes library somehow it appears the Apple TV is losing it way.
    I welcome any help as I don't want to have to keep factory resetting my Apple TV to keep it working.

    Fascinating just reading about your setup. I have a WRT350N and have noticed that it will drop its speed, sometimes down to 1Mbps. It seems to do so at about the same time every day, but usually comes back to speed in about 5 minutes. In my experience, the Apple TV will disconnect if the speed falls this low. Try monitoring the Linksys with Netstumbler, Vistumbler, or just in the Windows Network utility.
    Check the "lease obtained" and "lease expired" times for your router to see if that is when the network fails. I've just finished reading an angry thread over at the Linksys forum about the WRT330N where someone mentioned that the router wasn't renewing its lease.
    "I cannot set it run off automatic DHCP from the WRT330N, the router will not assign it an IP every time the lease expires, causing me to have to manually set an IP on the Print server. That's annoying. Having the router drop IP's to individual machines after 12-48 hours...very annoying."
    http://forums.linksys.com/linksys/board/message?board.id=Wireless_Routers&thread .id=67412
    If that is the problem, then I would consider setting up a Static IP address for your Apple TV. You can do that through the user interface -> Settings -> Network -> Configure ... (Quite intuitive as you only have change IP address and the subsequent details remain the same.)
    My router assigns IP Addresses in the ranges of 192.168.1.100 ->149. The idea here is to choose an address outside of that range but is not greater than 192.168.1.253 (and should not end in the number 1). You shouldn't have to change the linksys router as long as 50 clients are assigned in that range. You'll have to figure that out by accessing your router webpage at browser address 192.168.1.1 -> the default password is "admin" (without the quotes).
    Good luck.

  • Not able to see the data in the report

    Hi All
          In my cube i am having data.But when i am running the report ,i am not able to see the data.
        The error its throwing is -No Applicable data found.
        what could be the problem,please provide me the idea to solve the problem.
    Thanks&regards
    syam prasad dasari

    HI,
    See that any restrictions are there in the report(Filters)....Give the same restrictions in Listcube and see if you are getting data or not.....
    Thanks

  • Not able to see data in the qualifier table of the main tbl , Data Manager

    Hi,
    I have an issue of not able to see the data of two qualified table after populating them.
    It is in mdm-5.5 ps4.
    When populating data first time ,it shows up in those two table slots in the right side of the Data Manager.
    However subsequently it does not show up in those slots , only by right click on the table and selecting "View/edit", the window pops up where those data shows up.
    However unlike other qualified tables the data does not showup automatically for these two tables.
    Appreciate any suggestion or feedback on this.
    regards,
    -reo

    You may have checked the Filter Check Box next to the Qualified Lookup cell in Data Manager, when the current table is the Main Table.
    You use the Filter Checkbox to limit the qualified table records by the current search selections.
    Secondly, you have see if there are any Qualified Links to the main table record you are viewing.
    If not, create the Qualified links in Data manager, for the main table record and the Qualified Table Record.
    Once this is done, you will see the Display fields of the Qualified table for which the links exists for the given main table record.
    Message was edited by:
            Adhappan Thiagarajan

  • Not able to see data in Pivot table

    Hi,
    I have a issue with pivot table i have a column which displays values 0 and 1 and another column called month when i am placing this month column as a section and values column as a measure i am not seeing any values means i can see the month as header but instead showing 0 or 1 its showing blank columns. previously i created similar kind of table it worked but at that time values column data type is number this time its char. can anybody help me out how i can see the data in the pivot table. i already tried converting this column to number but still i am not able to see data in that values column.
    Thanks

    Hi copter,
    Place the month column in rows and value column in measure section and check if results are coming.If still it doesnt come i suppose you dint apply aggregation rules to value column.In pivot view click values column and aggregate by /select min or max or either server complex and check your results.
    (I suppose your aggregation rules is default)....Correct this one and you can place it in sections as per your requirement.
    Cheers,
    KK

  • Not able to see data in 0FIGL_V30 & 0FIGL_V31

    Hi,
    I've activated / installed standard business content for EpH3 i.e Mutltiprovider 0FIGL_M30 and entire data flow which includes reports and virtual providers 0FIGL_V30 & 0FIGL_V31.
    I'm able to see data in cubes where above virtual providers read data from. here is the link from help.sap.com
    http://help.sap.com/erp2005_ehp_03/helpdata/EN/6b/fdc62d9e0b444cb14b7f424d9f9cb7/frameset.htm
    Issue is i'm not able to see data in Virtual providers 0FIGL_V30 & 0FIGL_V31 and hence in reports.
    Can anyone advice please. thanks
    SD

    Hi All,
    Yes I've checked data in underlying cubes.
    Mulitprovider is fine.
    I've added Master Data for both 0GL_ACCTP  and 0ACCESSTP
    RFC connection is fine.
    No DTP & Transformation since this is Virtual Provider based on Functional Module.
    However when I debug FM for 0FIGL_V30 & 0FIGL_V31 - I see no data and thought there might be master data issue b/w 0GL_ACCOUNT & 0GLACCEXT but MD is fine.
    It just not pulling data.
    Is there some setting I'm missing?
    FM's used for Virtual Providers are
    0FIGL_V30  - RS_BCT_FIGL_SREP_DATA_GET_V30
    0FIGL_V31 - RS_BCT_FIGL_SREP_DATA_GET_V31
    SD

  • Not able to see Data in Xcelsius 2008

    Hi everyone,
    My question is I am not able to see data in Xcelsius spreadsheet although I am able to connect to SAP BW and also able to see and select query but when I select Cross Tab Data in output Values it is not displaying in Xcelsius spreadsheet
    System Info
    Xcelsius 2008 Enterprise Trial Version SP 3.0
    SAP BW 7.1 SP 6 ABAP and JAVA
    Any help would be appreciated

    Hi Rashid,
    When you are using the BW conenction in Xcelsius you will not see any data in the spreadsheet at design time or at preview time.
    To see the data you need to go SAP > Publish, then SAP > Launch to test the dashboard in the NetWeaver Portal as that is the only place where the data can be viewed.
    Regards
    Matt

  • Not able to see hierarchial org structure by clicking on Expand this branch

    Dear experts,
    I am currently using the Online data extraction via sap for Nakisa Integration with SAP Landscape.
    I have completed the configuration of Nakisa with the help of configuration guide and administrator guide - After completing administrator steps the org chart is visible - When i navigate to the org structure i can see the org unit under the org structure root that i configured as an administrator in the general settings section.
    When i click the + sign ie on expand this branch i am not able to see all teh org units under the displayed branch.
    Can you please guide me regarding how one can view the org structure below the selected branch when i click on expand this branch section.
    Manager Personnel Id is not maintained for this org unit - Should the user clicking on the expand this branch be the manager of the org unit to see the org structure.
    Regards
    HKishan

    Dear Luke,
    I am not able to see that navigation icons within an org chart box - The org unit that is displayed on clicking the orgchart does have branches in SAP but i am not able to see these navigation icons that lead me to these branches.
    Is there any specific step that needs to be done to see these branches.
    By the way what is the log file you are refering to is it the "PresentationResources.xml " or is it any other log file.
    Regards
    Hkishan

  • Not able to see the tree on the jspx page after running

    Hi All,
    This is something strange.I am dragging the VO on the page fragment from the data control as adf tree. And I am using the panel collection as component for adf tree.
    After running the jspx when I am moving to the fragment I am not able to see the tree.
    However when I am running the AM it is working properly for the view objects and view link used to populate the tree.
    Can anybody put some thoughts on this.
    Thanx
    Kanika

    Thnx for your replies..
    I am dropping taskflow as region . I am not using the switcher component.
    On left side of the page the tree is visible now. but the taskflow is not refreshing on the click of the tree node based on the value of the node.
    Please advice how to accompolish this now??

Maybe you are looking for