Not able to select Aperture library in iTunes to share on AppleTV
I moved the Aperture Library (107Gb) to an external disk that is mounted to the iMac. In order to view the photo's on the AppleTV I need to change in iTunes in Home sharing the setting for the new location of the library. In Photo Sharing Preferences it is possible to see the new location and the aperture library. However it is impossible to select the new location on the external drive because it is greyed out. And now it is no longer possible to view the photo's on AppleTV. Is it only possible to view photo's when they are on the iMac where iTunes is installed? What do I miss?
Might be a Safari extension causing this ..
From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test.
If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.
Similar Messages
-
I am trying to sync my itunes with my ipod, but when I get to step 3 of syncing, it stops. Also, I deleted all the songs on my ipod, and when I go to my music in my ipod the songs are all still there and in a grey color and I'm not able to select them. How do I completely clear my ipod music, and how can I solve the syncing problem?
Sync works the same way it always has, connect the device, select the content desired to sync and sync.
All the media should be in iTunes already, iDevices are not and have never been backup devices.
If this is a new computer, move the content from the old computer to the new computer. -
Not able to select images in iphoto 8????
Since I've installed iphoto 8, I'm not able to select my pictures as I did with iphoto 6. When adding images through yahoo mail for example, I was able to before locate my iphoto folder, and it would give me a drop list of all the pictures. With iphoto 8, all I see is "iphoto library" and its faded out and I can't select it.
Does anyone know if this is just the way iphoto 8 works, or is there a way to fix this. The only solution I have found, is I have to copy the pictures on to my desktop and then select them from there.
Please help
Thank you in advanceTHe basic answer is to export them to a desktop folder and access them form there
for a comnplete discussion see TD's post here -- http://discussions.apple.com/thread.jspa?threadID=1199193&tstart=15
Larry Nebel -
please can anyone help me to download some apps for my iphone .. i am simply not able to log in to the itunes store , when i enter my apple id it says that it has not yet been used with the itunes store
Ok, you should generally only get this when you are converting your ID to an iTS account for the first time.
Sign into iTunes with your Apple ID and you should get this.... IRC once you agree or accept it's now an iTS account and you wont get that again. -
I am not able to burn a CD on Itunes
I am not able to burn a CD on Itunes. When I click burn it opens up the CD drive and I put in a black CD. When it goes back in it shows the computer is reading the disk, but then suddenly stops. No error message, just stops. At that point I did a diagnostics test and the following error appeared. Can anyone help me?
The last failed audio CD burn had error code -128(0xffffff80). It happened on drive D: HL-DT-ST DVDRAM GMA-4020B on -128(0xffffff80) media at speed 0X.You need to update your Mac OS X to at least 10.6.8.
Apple menu > Software update. -
I'm having problems (1) selecting onscreen text, (2) resizing menu boxes and selecting menues with the cursor. I'm not able to select menus and move them. I'm not sure how to correct this.
1) This is because of software version 1.1. See this
thread for some options as to how to go back to 1.0,
which will correct the problem...
http://discussions.apple.com/thread.jspa?threadID=3754
59&tstart=0
2) This tends to happen after videos. Give the iPod a
minute or two to readjust. It should now be more
accurate.
3) This?
iPod shows a folder icon with exclamation
point
4) Restore the iPod
5) Try these...
iPod Only Shows An Apple Logo and Will Not Start
Up
iPod Only Shows An Apple Logo
I think 3,4, and 5 are related. Try the options I
posted for each one.
btabz
I just noticed that one of the restore methods you posted was to put it into Disk Mode First rather than just use the resstore straight off, I Have tried that and seems to have solved the problem, If it has thank you. previously I have only tried just restoring it skipping this extra step. Hope my iPod stays healthy, if it doesnt its a warrenty job me thinks any way thanks again -
We recently had a new printer installed at work that has been set as the Default printer on my computer. When I go to print something from Firefox, I am not able to select the new printer from the printer window in the print box. The new printer does not show up
From another computer, go to http://www.mozilla.com/firefox/, click "Free download" button, click "Save File" button, select your flash drive in "Save as" window. "Firefox Setup 3.6.13.exe" file will be saved in your flash drive.
You just need to insert it in your new computer and double-click on "Firefox Setup 3.6.13.exe" from Windows Explorer and follow instructions. -
Not able to select sales area for reference BP in CRM system
Hi All
I am not able to select sales area data for the reference customer copied from r/3 to crm sysytem even through ORg. structure is properly maintain ( Object permitted in determination is ticked).
The field " Choose sale area is subpress/grey.
Please help me for the same.Hi Kishore,
So you manage get into Sales Area Data, but when you
try to select Sales Organization you get nothing?
(click Sales Org combo but no selection appear)?
How about field Distribution Channel and Division?
I am afraid some of these fields still not properly
set/transported to CRM.
In R/3, this BP has maintained under same Sales Area
which mapped in CRM Org Model right ?
What is role in CRM when you open the BP?
Have you check if there is any error in middleware
when downloading BP data to CRM?
Cheers,
Gun. -
I recently reinstalled iTunes, and now it won't recognize my iphone so I'm not able to sync the phone with iTunes. How do I fix this?
It has been shown there are problems with the latest update of iTunes and Windows computers. What you need to do is remove and reinstall iTunes, and make sure that you follow the steps in this support document exactly. http://support.apple.com/kb/ht1923. If you do not follow them exactly, you will just compound your problems. Once you do this, you should have no trouble having the phone recognized in iTunes.
-
I have tried to update IOS 5.1 in my Iphone 4 and unfortunately I got an error message and phone is stucked at restore point. It is not coming back to normal mode and is not able to detect my phone in iTunes. Please help me how to recover my Iphone IOS, unfortunately I don't have my iphone backup too.
we have a same problem
-
How do I import a camera video from iphoto to imovie? I went to file, import, camera archives and the video I want I am not able to select. I even tried dragging it from my desktop, but it will not allow me to do so. Please help?
Use File/Import/Movie and navigate to the file.
-
Not able to select speaker setup in creative audio cons
Hi, I'm using Creative X-FI Music. Due to a recent re-installation to Vista, after re-installation of drivers and software (with updates from creative support website), I'm still not able to select the speaker setup directly from the audio console. This has prevent me from calibrating my 5. speaker setu
ps.
Please help? Thanks....what's your os? if you have xp, you should try sp2...that fixed the problems i was having with my card when i upgraded...try telling windows to go to 5. sound through the sound devices in control panel and then go back to surrmixer and see if that works...
-
Not able to select a row in ALV in Webdynpro
Hi everyone,
I have developed a webdynpro application and I have declared component usage for SALV_WD_TABLE.
The data gets displayed in the ALV, but always the first row is selected.
When I try to select another row,I am not able to select.
Could anyone please suggest what might be the problem ?
Thanks in advance.
Regards,
Kumudha.Hi Manas,
Thanks for the inputs.
I am placing the code below for your reference.
I try to change the below as Display Text as Code...But it is not happening Plz check
method wddoinit.
if wd_this->ls_setup is initial.
select single * from yyua_c_setup into wd_this->ls_setup
where system_id = sy-sysid.
endif.
"adjustments for ALV
data lo_cmp_usage type ref to if_wd_component_usage.
lo_cmp_usage = wd_this->wd_cpuse_alv( ).
if lo_cmp_usage->has_active_component( ) is initial.
lo_cmp_usage->create_component( ).
endif.
data: l_ref_interfacecontroller type ref to iwci_salv_wd_table .
l_ref_interfacecontroller = wd_this->wd_cpifc_alv( ).
data: l_value type ref to cl_salv_wd_config_table,
lr_header_t type ref to cl_salv_wd_header,
lv_text type string.
l_value = l_ref_interfacecontroller->get_model( ).
data: lr_column_settings type ref to if_salv_wd_column_settings,
lr_input_field type ref to cl_salv_wd_uie_input_field,
lr_column type ref to cl_salv_wd_column.
Set column title and position
lr_column = l_value->if_salv_wd_column_settings~get_column( 'CSINSTA' ).
lr_column->set_position( 1 ).
lv_text = cl_wd_utilities=>get_otr_text_by_alias( 'Z_REFERENCE/REQUEST_NUMBER' ).
lr_column->r_header->set_text( 'Installation' ).
lr_column->r_header->set_ddic_binding_field( '00' ).
lr_column = l_value->if_salv_wd_column_settings~get_column( 'ERFUNAME' ).
|
lr_column->set_position( 18 ).
lv_text = cl_wd_utilities=>get_otr_text_by_alias( 'Z_REFERENCE/ACTIVITY_DATE' ).
lr_column->r_header->set_text( 'Job profile ext' ).
lr_column->r_header->set_ddic_binding_field( '00' ).
Hide columns
lr_column = l_value->if_salv_wd_column_settings~get_column( 'ERFTSTMP' ).
lr_column->set_visible( 0 ).
lr_column = l_value->if_salv_wd_column_settings~get_column( 'AETSTMP' ).
lr_column->set_visible( 0 ).
lr_column = l_value->if_salv_wd_column_settings~get_column( 'STATUS' ).
lr_column->set_visible( 0 ).
lr_column = l_value->if_salv_wd_column_settings~get_column( 'PRIO' ).
lr_column->set_visible( 0 ).
lr_column = l_value->if_salv_wd_column_settings~get_column( 'ISSUE' ).
lr_column->set_visible( 0 ).
data: lr_functions type ref to if_salv_wd_function_settings,
lr_function type ref to cl_salv_wd_function,
lr_button_t type ref to cl_salv_wd_fe_button.
Add self-defined functions in toolbar
lr_functions ?= l_value.
lr_function = lr_functions->create_function( 'SELECT' ).
create object lr_button_t.
lv_text = cl_wd_utilities=>get_otr_text_by_alias( 'Z_REFERENCE/VIEW' ).
lr_button_t->set_text( 'Select' ).
lr_function->set_editor( lr_button_t ).
data : LR_FUNCTION_SETTINGS TYPE REF TO CL_SALV_WD_CONFIG_TABLE.
create object LR_FUNCTION_SETTINGS.
SET row selectable as true
CALL METHOD LR_FUNCTION_SETTINGS->IF_SALV_WD_TABLE_SETTINGS~SET_ROW_SELECTABLE
EXPORTING
VALUE = ABAP_TRUE.
endmethod
Regards,
Kumudha. -
Not able to select a row in ALV?
Hi Experts,
I am enhancing a standard e-recruiting WD ABAP component.
It produces a search result as ALV.
I am not able to select any row in ALV by clicking it like we normally do in ALV.
I wrote below code to allow selection:
lo_value->if_wd_salv_table_settings~set_selection_mode( cl_wd_table=>e_selection_mode-single).
Even after this I am not able to select any row by clicking it.
Need help to solve this.
Regards,
Sumit OberoiHi,
To have the inputfields for the ALV.
Get the column references of the ALV table and for each column rference create a inputfield object
type CL_SALV_WD_UIE_INPUT_FIELD.
lo_value is model object.
CALL METHOD lo_value->if_salv_wd_column_settings~get_columns
RECEIVING
value = wd_this->lit_columns.
LOOP AT wd_this->lit_columns INTO wd_this->lis_columns.
lv_id = wd_this->lis_columns-id.
wd_this->gref_column = wd_this->lis_columns-r_column.
case lv_id.
when ' colname'.
CREATE OBJECT lr_input
EXPORTING
value_fieldname = lv_id.
CALL METHOD wd_this->gref_column->set_cell_editor
EXPORTING
value = lr_input.
when ' colname'.
CREATE OBJECT lr_input
EXPORTING
value_fieldname = lv_id.
CALL METHOD wd_this->gref_column->set_cell_editor
EXPORTING
value = lr_input.
endcase.
endloop.
Or you can take a attribute READ_ONLY for the node to which ALV table is bound.
Set the readonly property to abap_false (for input field) by looping through the table.
Get the column references and get the textview reference for each column and use the set_read_only
method by passing the attribute name.
This way the textview will now become the inputfield when the read_only property is set to abap_false.
Regards,
Lekha. -
Not able to select annotation in Adobe Reader X
Hi,
If I hide both toolbar and navigation panel then I am n't able to select annotation in Adobe Reader/Acrobat X. This wasn't the case with earlier version of Adobe.
So is this issue of latest Adobe?
Regards,
ArvindI checked in version 10.0.1 also. I am not able to select annotation with left mouse button click. This happens only when both toolbar and navigation panel are hidden. You can check this at your end.
And using RMB click, I am able to select annotation. I think this is an issue of latest Adobe as earlier we were able to select using LMB click even when both toolbar and navigation panel are hidden.
Regards,
Arvind
Maybe you are looking for
-
Issue while creating ADF Table programatically
Hi, I am trying to create a table programatically...And i implemented like below: RichTable phoneTable = new RichTable(); phoneTable.setEmptyText("No Phone Details yet"); getContactPhone(contactObj.getPhone());
-
Can't zoom on video mode on the iPad mini running IOS 7
Hi! i was playing with my iPad mini's camera app because of boredom, and i notice that if you switch to video on the default camera app there is no zoom... the virtual zoom? doesn't work, but on beta phase it was working fine... but now i'm running t
-
What is the keyboard shortcut to select multiple files?
I have the wireless keyboard and Mac OS 10.6.8. How do I select multiple contiguous files in Finder? I've tried shift + click, fn + click, control + click, option + click, and command + click, but nothing works. Is there some burried setting somewhe
-
If I get a user to enter their name as a variable and I am linking one movie to another using a button, is there a way to carry the user name forward into the second movie?
-
Max Number of records for BAPI 'BAPI_PBSRVAPS_GETDETAIL'
Hi All, Can you suggest me the number of records to be fed to the 'BAPI_PBSRVAPS_GETDETAIL'. I am using a few location products for 9 key figures.Whenever number of records in selection table increases BAPI behaves in a strange way and the code writt