Not able to select Item category in KE27

Dear Experts,
I created a characteristic Item Category and I derivate this field through a user exit. When I tried to run KE27 excluding by Item category (some materials from specific item categories must not be revaluated), the system generates error KG018, not allowing me to put the item category in the selection.
Item categories doesnt show up in match code as its derived by a user exit.
Question: How can I make it possible to select the item category information in KE27?
Is it possible to derive to CO-PA direct from VBRP?
Is the error because I derive it from user-exit?
Kind Regards
Mayumi Blak

I found the answer myself!
I have to create the options for the characteristics in KES1.
KR
Mayumi Blak

Similar Messages

Not able to change item category of a sales order in VA02

Hi,
When I am going to transaction VA02 for changing an sales order it is not allowing me to change z item category of the line item. Can someone tell me if it is a configuration or some User exit/BADI might be there behind this behavior.
Note: Recently the system was upgraded to ECC 6.0 and after that only this problem was coming.
Thanks,
Chinmay

Hi Chinmay,
Based on your question, I assume you need to go through this links:
http://www.magnatraining.com/sap-item-category-determination-manual-vs-automatic/
http://help.sap.com/saphelp_46c/helpdata/en/dd/55fb13545a11d1a7020000e829fd11/content.htm
Also search this forum and if you dont find an answer then get back.
Please help yourselves with this link and if you still have further questions..get back.
Regards,
Raghu.

Not able to select lineitems in planner monitor,SAP GRC10 PC

Hello Experts,
We have created plans and we can able to see created plans in planner monitor under assessment planning in NWBC
we can able to select the plan name and send to recipient by using Notify button up to this everything is fine
but when we want to send more than one plans to recipients,not able to select the line items.
any idea to resolve this.
Thanks
GRC Admin

Hi,
Even if you can choose multiple lines by pressing ctrl key, Notification is
allowed for one plan at once. So, it won't allow you to do so.
Regards,
Smita.

Logic Pro 9 - Not able to select plugins via Inserts / Audio Units.

Hi
I have the program Logic Pro 9 version 9.1.6 (1700.43) (32- bit)
I use plugins like for example SampleTank and Realstrat . Everything has until recently worked fine, but I now have a problem.
When I choose a plugin I usually put the mouse on the box 'Inserts', press ALT and then a menu appears. Here I, among many menu items, at the bottom see ' Audio Units ' . At this point I usually could choose, for example SampleTank , .. but now I can only choose Apple features. That is to say - I can not choose my plugins in this menu anymore.
I've been around online and search . Here I was recommended to delete a file called com.apple.audiounits.cache . I have done this, but the problem is not solved.
I also have updated the operating system with latest MacOSX10.7.5 update . This has not helped .
All my plugins are also visible in Logic Audio Units Manager, and I can see that they are being loaded when Logic starts up.
The plugins also still works in projects created within the problem occurred. That is, - I can open for example SampleTank in a track in a project that is created and a half years ago.
So the exact problem is that I, in new projects, is not able to select plugins via Inserts / Audio Units .
Can you help me solve this problem?
Regards Henrik

Hekke44 wrote:
I do not think it is very user friendly, I must say.
For users of this system, it must surely be obvious that you very often have to choose musical instruments, also from instrument plug-ins.
Yes, often. That is why it is very obvious and simple for any experienced user.
Hekke44 wrote:
Why on earth is it so complicated to choose a musical instrument? If you are not currently using this system every day, you forget the such a detail about having to press down for several seconds to select an instrument.
I do not think it is complicated at all. And you do not have to press down for several seconds. I just timed, it is 0.4 seconds of clickholding. The holding is functional: you won't load a new instrument (and possiblly loose any work you had done on your sound) just because you accidentally clicked on a slot.
Hekke44 wrote:
There should be a nice big green button on the screen that read 'Select musical instrument', - then a menu where you can choose whether it should be one of Logics musical instruments, or a plugin instrument.
It would be user-friendly.
What is your view about these things?
You are basically saying it should be dumbed down to the level of some "any-kid-or-adult-idiot-can-use-it-out-of-the-box" smartphone app. I think you are overlooking that this is a Pro program, not a toy. I think you try to blame the software for the fact that you didn't know how to operate it. You're avoiding responsability. That's my view.

I'm having problems (1)selecting onscreen text, (2) having problems resizing menu boxes and selecting menues with the cursor. I'm not able to select menus and move them. I'm not sure how to correct this.

I'm having problems (1) selecting onscreen text, (2) resizing menu boxes and selecting menues with the cursor. I'm not able to select menus and move them. I'm not sure how to correct this.

1) This is because of software version 1.1. See this
thread for some options as to how to go back to 1.0,
which will correct the problem...
http://discussions.apple.com/thread.jspa?threadID=3754
59&tstart=0
2) This tends to happen after videos. Give the iPod a
minute or two to readjust. It should now be more
accurate.
3) This?
iPod shows a folder icon with exclamation
point
4) Restore the iPod
5) Try these...
iPod Only Shows An Apple Logo and Will Not Start
Up
iPod Only Shows An Apple Logo
I think 3,4, and 5 are related. Try the options I
posted for each one.
btabz
I just noticed that one of the restore methods you posted was to put it into Disk Mode First rather than just use the resstore straight off, I Have tried that and seems to have solved the problem, If it has thank you. previously I have only tried just restoring it skipping this extra step. Hope my iPod stays healthy, if it doesnt its a warrenty job me thinks any way thanks again

I am trying to sync my itunes with my ipod, but when I get to step 3 of syncing, it stops. Also, I deleted all the songs on my ipod, and when I go to my music in my ipod the songs are all still there and in a grey color and I'm not able to select them.

I am trying to sync my itunes with my ipod, but when I get to step 3 of syncing, it stops. Also, I deleted all the songs on my ipod, and when I go to my music in my ipod the songs are all still there and in a grey color and I'm not able to select them. How do I completely clear my ipod music, and how can I solve the syncing problem?

Sync works the same way it always has, connect the device, select the content desired to sync and sync.
All the media should be in iTunes already, iDevices are not and have never been backup devices.
If this is a new computer, move the content from the old computer to the new computer.

Migo cannot be done " PO does not contain any selectable items"

Dear SAP Gurus
We have a very urgent issue, while trying to do MIGO for a particular standard PO.
Some down payments have been done to this PO already and now when we try to do the MIGO, system is giving the error "PO does not contain any selectable items"
The accounting document which is created when the down payment is done can be seen in the purchase order History.
Please suggest soem solution
Thanks
kk

Hi Kavitha,
Please check whether all the po item quantities are received. If any open line items are there then go to item detail po tab in that Select Confirmation Tab and Check whether the confirmation is Z001. Change it to 0001 etc and save.
Try this, if unresolved revert back.
Reg,
Ashok
Assign points if useful.

I am not able to select a new network printer just installed at work to print to from Firefox. I have tried to reset the printer settings, but this did not work. Do I need to map Firefox to this new printer?

We recently had a new printer installed at work that has been set as the Default printer on my computer. When I go to print something from Firefox, I am not able to select the new printer from the printer window in the print box. The new printer does not show up

From another computer, go to http://www.mozilla.com/firefox/, click "Free download" button, click "Save File" button, select your flash drive in "Save as" window. "Firefox Setup 3.6.13.exe" file will be saved in your flash drive.
You just need to insert it in your new computer and double-click on "Firefox Setup 3.6.13.exe" from Windows Explorer and follow instructions.

Not able to select sales area for reference BP in CRM system

Hi All
I am not able to select sales area data for the reference customer copied from r/3 to crm sysytem even through ORg. structure is properly maintain ( Object permitted in determination is ticked).
The field " Choose sale area is subpress/grey.
Please help me for the same.

Hi Kishore,
So you manage get into Sales Area Data, but when you
try to select Sales Organization you get nothing?
(click Sales Org combo but no selection appear)?
How about field Distribution Channel and Division?
I am afraid some of these fields still not properly
set/transported to CRM.
In R/3, this BP has maintained under same Sales Area
which mapped in CRM Org Model right ?
What is role in CRM when you open the BP?
Have you check if there is any error in middleware
when downloading BP data to CRM?
Cheers,
Gun.

J1IEX post than made error like does not contain any selectable items

Respected Sir,
We have purchase the Goods From SEZ unit and it wil be treated as import made.
We doing the following activities
1. Prepared the Import P.O.
2. released the same P.O.
3. Doing the MIRO for Custome Vendor
4. Capture the J1iex
than we fins the below mention ERROR & Diagnoses and ERROR
Document 4400000016   does not contain any selectable items
Message no. M7064
Diagnosis
The document or document item entered cannot be adopted.
Possible reasons for this are:
u2022     The document items have already been processed
(Suggest zero lines indicator set?).
u2022     the document items have been deleted or are blocked.
u2022     the document items have been created for a different plant.
u2022     (for reservations only) movements are not yet allowed for the reservation items.
u2022     (for reservations only) the document items are retrograde components of the order. These are posted using the order confirmations.
u2022     A confirmation must exist for the document items.
u2022     The document items must be released first.
u2022     The document is an R/2 document.
Procedure
Make sure your entries are correct.
u2022     If the system has already processed the total quantity, you can set the Suggest zero lines indicator. The system will suggest the quantity zero for the items that have already been processed.
u2022     If you have entered a particular item, cancel the item. If you do not enter an item, the system searches all of the open items in the document.
u2022     If the document is a purchase order, production order or a reservation, you can
Kindly doneedfull above mention error
Thanks & Regards
Bipin Shah

HI,
Please check whether all the vendor and excise details have been maintained in J1id. i.e Excise rate maintainance.
Hope this helps.
Regards,
Prasanna
Award pls if helpful

Document 4500016031   does not contain any selectable items

Hi Friends,
I am doing MIGO(godds receipt) and adopted following procedure for MIGO.
ME5J----->(Entered my Proj. defn---> executed
Select material T-20610.
Click the "Assign automatically" pushbutton.
Assign materials T-20620 and T-20630 the same way.
Display the overview of the assignments and then create the purchase order.
Click the "Assignments" pushbutton.
The purchase requisitions are sorted in the overview according to their assignments. You can create new purchase orders by clicking the "Process assignment" pushbutton.
Place your cursor on the line below vendor "C.E.B.".
Click the "Process assignment" pushbutton.
Confirm the first dialog box by clicking the "Continue" pushbutton.
If another dialog box appears, click "New purchase order".
The purchase order appears.
On the left-hand side of the overview, select your three purchase requisitions and copy them to the purchase order.
Click the "Copy" pushbutton.
Save the purchase order.
Click the "Save" pushbutton.
The purchase order number appears in the status bar.
Make a note of the order number:   ____4500016031________
Now I got the PO as per above procedure Now While I am doing MIGO---Goods receipt am getting the below message.
Any pointers is appreciated and will be rewarded.
Document 4500016031(PO)   does not contain any selectable items
Message no. M7064
Diagnosis
The document or document item entered cannot be adopted.
Possible reasons for this are:
o   The document items have already been processed
        (Suggest zero lines indicator set?).
o   the document items have been deleted or are blocked.
o   the document items have been created for a different plant.
o   (for reservations only) movements are not yet allowed for the
        reservation items.
o   (for reservations only) the document items are retrograde components
     of the order. These are posted using the order confirmations.
o   A confirmation must exist for the document items.
o   The document items must be released first.
o   The document is an R/2 document.
Procedure
Make sure your entries are correct.
o   If the system has already processed the total quantity, you can set
     the Suggest zero lines indicator. The system will suggest the
     quantity zero for the items that have already been processed.
o   If you have entered a particular item, cancel the item. If you do
     not enter an item, the system searches all of the open items in the
o   If the document is a purchase order, production order or a
     reservation, you can enter search criteria in the dialog box.
     You access the dialog box by choosing Enter with reference on the
     initial screen.
o   If the document is an SAP R/2 document, you have to cancel it
     manually by entering the reversal movement type.
Regards

Hi
Check item level Confirmation tab I think this PO is activated for Inbound delivery or Confirmation control
vIVEK

Not able to select images in iphoto 8????

Since I've installed iphoto 8, I'm not able to select my pictures as I did with iphoto 6. When adding images through yahoo mail for example, I was able to before locate my iphoto folder, and it would give me a drop list of all the pictures. With iphoto 8, all I see is "iphoto library" and its faded out and I can't select it.
Does anyone know if this is just the way iphoto 8 works, or is there a way to fix this. The only solution I have found, is I have to copy the pictures on to my desktop and then select them from there.
Please help
Thank you in advance

THe basic answer is to export them to a desktop folder and access them form there
for a comnplete discussion see TD's post here -- http://discussions.apple.com/thread.jspa?threadID=1199193&tstart=15
Larry Nebel

How do I import a camera video from iphoto to imovie? I went to file, import, camera archives and the video I want I am not able to select. I even tried dragging it from my desktop, but it will not allow me to do so. Please help?

How do I import a camera video from iphoto to imovie? I went to file, import, camera archives and the video I want I am not able to select. I even tried dragging it from my desktop, but it will not allow me to do so. Please help?

Use File/Import/Movie and navigate to the file.

Not able to select speaker setup in creative audio cons

Hi, I'm using Creative X-FI Music. Due to a recent re-installation to Vista, after re-installation of drivers and software (with updates from creative support website), I'm still not able to select the speaker setup directly from the audio console. This has prevent me from calibrating my 5. speaker setu
ps.
Please help? Thanks....

what's your os? if you have xp, you should try sp2...that fixed the problems i was having with my card when i upgraded...try telling windows to go to 5. sound through the sound devices in control panel and then go back to surrmixer and see if that works...

Not able to select a row in ALV in Webdynpro

Hi everyone,
I have developed a webdynpro application and I have declared component usage for SALV_WD_TABLE.
The data gets displayed in the ALV, but always the first row is selected.
When I try to select another row,I am not able to select.
Could anyone please suggest what might be the problem ?
Thanks in advance.
Regards,
Kumudha.

Hi Manas,
Thanks for the inputs.
I am placing the code below for your reference.
I try to change the below as Display Text as Code...But it is not happening Plz check
method wddoinit.
if wd_this->ls_setup is initial.
    select single * from yyua_c_setup into wd_this->ls_setup
      where system_id = sy-sysid.
endif.
"adjustments for ALV
data lo_cmp_usage type ref to if_wd_component_usage.
lo_cmp_usage =   wd_this->wd_cpuse_alv( ).
if lo_cmp_usage->has_active_component( ) is initial.
    lo_cmp_usage->create_component( ).
endif.
data: l_ref_interfacecontroller type ref to iwci_salv_wd_table .
l_ref_interfacecontroller = wd_this->wd_cpifc_alv( ).
data: l_value type ref to cl_salv_wd_config_table,
        lr_header_t type ref to cl_salv_wd_header,
        lv_text type string.
l_value = l_ref_interfacecontroller->get_model( ).
data: lr_column_settings type ref to if_salv_wd_column_settings,
        lr_input_field type ref to cl_salv_wd_uie_input_field,
        lr_column type ref to cl_salv_wd_column.
Set column title and position
lr_column = l_value->if_salv_wd_column_settings~get_column( 'CSINSTA' ).
lr_column->set_position( 1 ).
lv_text = cl_wd_utilities=>get_otr_text_by_alias( 'Z_REFERENCE/REQUEST_NUMBER' ).
lr_column->r_header->set_text( 'Installation' ).
lr_column->r_header->set_ddic_binding_field( '00' ).
lr_column = l_value->if_salv_wd_column_settings~get_column( 'ERFUNAME' ).
     |
lr_column->set_position( 18 ).
lv_text = cl_wd_utilities=>get_otr_text_by_alias( 'Z_REFERENCE/ACTIVITY_DATE' ).
lr_column->r_header->set_text( 'Job profile ext' ).
lr_column->r_header->set_ddic_binding_field( '00' ).
Hide columns
lr_column = l_value->if_salv_wd_column_settings~get_column( 'ERFTSTMP' ).
lr_column->set_visible( 0 ).
lr_column = l_value->if_salv_wd_column_settings~get_column( 'AETSTMP' ).
lr_column->set_visible( 0 ).
lr_column = l_value->if_salv_wd_column_settings~get_column( 'STATUS' ).
lr_column->set_visible( 0 ).
lr_column = l_value->if_salv_wd_column_settings~get_column( 'PRIO' ).
lr_column->set_visible( 0 ).
lr_column = l_value->if_salv_wd_column_settings~get_column( 'ISSUE' ).
lr_column->set_visible( 0 ).
data: lr_functions type ref to if_salv_wd_function_settings,
        lr_function type ref to cl_salv_wd_function,
        lr_button_t type ref to cl_salv_wd_fe_button.
Add self-defined functions in toolbar
lr_functions ?= l_value.
lr_function = lr_functions->create_function( 'SELECT' ).
create object lr_button_t.
lv_text = cl_wd_utilities=>get_otr_text_by_alias( 'Z_REFERENCE/VIEW' ).
lr_button_t->set_text( 'Select' ).
lr_function->set_editor( lr_button_t ).
data : LR_FUNCTION_SETTINGS TYPE REF TO CL_SALV_WD_CONFIG_TABLE.
create object LR_FUNCTION_SETTINGS.
SET row selectable as true
CALL METHOD LR_FUNCTION_SETTINGS->IF_SALV_WD_TABLE_SETTINGS~SET_ROW_SELECTABLE
EXPORTING
VALUE = ABAP_TRUE.
endmethod
Regards,
Kumudha.

Not able to select Item category in KE27

Similar Messages

Maybe you are looking for