Not able to select partial words in pdf

Hi Experts,
I have an issue of selecting text in the PDF, where a part of the text is not getting selected and the remaining part is getting selected. The case I have mentioned here uses a Small caps font where SmallCaps is applied through the Indesign application and not the actual Small Caps font being used. I am able to select the text when PDF is created through Postscript File from InDesign. When Directly exported from InDesign I face this issue. Please see the highlighted word "COMPEMENTARY ACCOUNTS" in the below screenshot from the InDesign document.
Here is the screenshot of the PDF which I created by exporting through InDesign.
And Here is the PDF created through postscript file from InDesign.
Could you please advice on this issue.

Let me see if I understand what you're doing. You create an InDesign document, export it to PDF, and then try to select some amount of text in the PDF. Is that correct? Which program are you using to open the PDF?
Jayesh_Kumar@int wrote:
…when PDF is created through Postscript File…
Are you using Distiller, or opening the PS file in another app like Preview or Acrobat?

Similar Messages

Not able to select paper based on pdf.. yes box is checked

I have adobe arcobat pro....I need to print loan documents using both letter and legal.....paper source will only chose either legal or letter..What to do, again yes the box is checked chose paper source based on pdf

Hi,
This one of the options we had explored, but it would be better if we can get the report by work center. The focus is to reduce the effort to get the report as there is need to get the same report for atleasr 8to 10 different group of work centers ( which are not in serial nos).
We would then need to put the work centers in the filters & save the layout.
Regards
Vineet

Not able to view Stamps in all .pdfs

Hi Adobe Community!
I'm not able to consistently view stamps in pdf's I have to review, both directly on the browser and on the application.
Before understanding stamps were an Adobe feature, I uninstalled and installed different version of Java (currently 1.6.0_41), Internet Explorer (currently IE8). When I understood it was Adobe, I installed the latest version (11.0.2), but still it does not show in all pdf's. I have Windows 7 Enterprise 32-bits SP1.
I know stamps are in a certain pdf because a colleague of mine can see them displayed once he opens the file. Opening the exact same file, I don't see them. On another pdf, I can see stamps. The only difference I find between both pdf's, is that the one where I can see stamps is "PDF Version: 1.6 (Acrobat 7.x)", and the one I can't is "PDF Version: 1.4 (Acrobat 5.x)".
Is there any Acrobat compatibility plug-in I'm missing? What can be the reason?
Thank you!

I faced same kind of problem some time back & found JInitiator as the cause. Try unintalling older Installation of JInitiator & reinstall it & it should work.

I'm having problems (1)selecting onscreen text, (2) having problems resizing menu boxes and selecting menues with the cursor. I'm not able to select menus and move them. I'm not sure how to correct this.

I'm having problems (1) selecting onscreen text, (2) resizing menu boxes and selecting menues with the cursor. I'm not able to select menus and move them. I'm not sure how to correct this.

1) This is because of software version 1.1. See this
thread for some options as to how to go back to 1.0,
which will correct the problem...
http://discussions.apple.com/thread.jspa?threadID=3754
59&tstart=0
2) This tends to happen after videos. Give the iPod a
minute or two to readjust. It should now be more
accurate.
3) This?
iPod shows a folder icon with exclamation
point
4) Restore the iPod
5) Try these...
iPod Only Shows An Apple Logo and Will Not Start
Up
iPod Only Shows An Apple Logo
I think 3,4, and 5 are related. Try the options I
posted for each one.
btabz
I just noticed that one of the restore methods you posted was to put it into Disk Mode First rather than just use the resstore straight off, I Have tried that and seems to have solved the problem, If it has thank you. previously I have only tried just restoring it skipping this extra step. Hope my iPod stays healthy, if it doesnt its a warrenty job me thinks any way thanks again

I am trying to sync my itunes with my ipod, but when I get to step 3 of syncing, it stops. Also, I deleted all the songs on my ipod, and when I go to my music in my ipod the songs are all still there and in a grey color and I'm not able to select them.

I am trying to sync my itunes with my ipod, but when I get to step 3 of syncing, it stops. Also, I deleted all the songs on my ipod, and when I go to my music in my ipod the songs are all still there and in a grey color and I'm not able to select them. How do I completely clear my ipod music, and how can I solve the syncing problem?

Sync works the same way it always has, connect the device, select the content desired to sync and sync.
All the media should be in iTunes already, iDevices are not and have never been backup devices.
If this is a new computer, move the content from the old computer to the new computer.

I am not able to select a new network printer just installed at work to print to from Firefox. I have tried to reset the printer settings, but this did not work. Do I need to map Firefox to this new printer?

We recently had a new printer installed at work that has been set as the Default printer on my computer. When I go to print something from Firefox, I am not able to select the new printer from the printer window in the print box. The new printer does not show up

From another computer, go to http://www.mozilla.com/firefox/, click "Free download" button, click "Save File" button, select your flash drive in "Save as" window. "Firefox Setup 3.6.13.exe" file will be saved in your flash drive.
You just need to insert it in your new computer and double-click on "Firefox Setup 3.6.13.exe" from Windows Explorer and follow instructions.

Not able to select sales area for reference BP in CRM system

Hi All
I am not able to select sales area data for the reference customer copied from r/3 to crm sysytem even through ORg. structure is properly maintain ( Object permitted in determination is ticked).
The field " Choose sale area is subpress/grey.
Please help me for the same.

Hi Kishore,
So you manage get into Sales Area Data, but when you
try to select Sales Organization you get nothing?
(click Sales Org combo but no selection appear)?
How about field Distribution Channel and Division?
I am afraid some of these fields still not properly
set/transported to CRM.
In R/3, this BP has maintained under same Sales Area
which mapped in CRM Org Model right ?
What is role in CRM when you open the BP?
Have you check if there is any error in middleware
when downloading BP data to CRM?
Cheers,
Gun.

Not able to select images in iphoto 8????

Since I've installed iphoto 8, I'm not able to select my pictures as I did with iphoto 6. When adding images through yahoo mail for example, I was able to before locate my iphoto folder, and it would give me a drop list of all the pictures. With iphoto 8, all I see is "iphoto library" and its faded out and I can't select it.
Does anyone know if this is just the way iphoto 8 works, or is there a way to fix this. The only solution I have found, is I have to copy the pictures on to my desktop and then select them from there.
Please help
Thank you in advance

THe basic answer is to export them to a desktop folder and access them form there
for a comnplete discussion see TD's post here -- http://discussions.apple.com/thread.jspa?threadID=1199193&tstart=15
Larry Nebel

How do I import a camera video from iphoto to imovie? I went to file, import, camera archives and the video I want I am not able to select. I even tried dragging it from my desktop, but it will not allow me to do so. Please help?

How do I import a camera video from iphoto to imovie? I went to file, import, camera archives and the video I want I am not able to select. I even tried dragging it from my desktop, but it will not allow me to do so. Please help?

Use File/Import/Movie and navigate to the file.

Not able to edit the words "chapter" and "section" in the document workflow

Hi all,
I would like to point out something that could be a bug. The 2 words "chapter" and "section" are not editable in the document workflow: I can just change the title for each chapter and the title for each section, but I am not able to change the words "chapter" and "section".
The problem is, iBooks Author is using the words "chapter" and "section" (heading 1) to build the TOC: if I am using iBooks Author in English, but I am writing a text in French, I am not able to change "Chapter" into "Chapitre". The only way to go, what I found out, is to close the app, change the OSX Lion system language, log out, re-open iBooks Author and start a new book: opening an English book in the French version of iBooks Author will not change automatically the language in the workflow.
Does anybody has a trick to edit the words "chapter" and "section"?
Best regards,
Mauro

Hi KT,
Thank you, but it's still in english.
I changed to "only number", then wrote the word "chapter" in french or italian or german before the number, then deleted the preview on the iPad and made a new preview, I still have the same result: the word "chapter" is still in the language of the app.
To be clear: I am writing a text using iBooks Author in italian. I have to translate the same text in french, the fastest way would be to rework the italian version (I already have all the multimedia stuff inside). I changed the italian word "Capitolo" (chapter) to the french one "Chapitre" (using the advices of AodhFFXI and K T). And for the first slide of the chapter that's fine.
But if I "close down" the first chapter slide or if I click on the top left botton to go to the chapter TOC, there I still have the word in italian, even if the word has been deleted in the layout:

Not able to select speaker setup in creative audio cons

Hi, I'm using Creative X-FI Music. Due to a recent re-installation to Vista, after re-installation of drivers and software (with updates from creative support website), I'm still not able to select the speaker setup directly from the audio console. This has prevent me from calibrating my 5. speaker setu
ps.
Please help? Thanks....

what's your os? if you have xp, you should try sp2...that fixed the problems i was having with my card when i upgraded...try telling windows to go to 5. sound through the sound devices in control panel and then go back to surrmixer and see if that works...

Not able to select a row in ALV in Webdynpro

Hi everyone,
I have developed a webdynpro application and I have declared component usage for SALV_WD_TABLE.
The data gets displayed in the ALV, but always the first row is selected.
When I try to select another row,I am not able to select.
Could anyone please suggest what might be the problem ?
Thanks in advance.
Regards,
Kumudha.

Hi Manas,
Thanks for the inputs.
I am placing the code below for your reference.
I try to change the below as Display Text as Code...But it is not happening Plz check
method wddoinit.
if wd_this->ls_setup is initial.
    select single * from yyua_c_setup into wd_this->ls_setup
      where system_id = sy-sysid.
endif.
"adjustments for ALV
data lo_cmp_usage type ref to if_wd_component_usage.
lo_cmp_usage =   wd_this->wd_cpuse_alv( ).
if lo_cmp_usage->has_active_component( ) is initial.
    lo_cmp_usage->create_component( ).
endif.
data: l_ref_interfacecontroller type ref to iwci_salv_wd_table .
l_ref_interfacecontroller = wd_this->wd_cpifc_alv( ).
data: l_value type ref to cl_salv_wd_config_table,
        lr_header_t type ref to cl_salv_wd_header,
        lv_text type string.
l_value = l_ref_interfacecontroller->get_model( ).
data: lr_column_settings type ref to if_salv_wd_column_settings,
        lr_input_field type ref to cl_salv_wd_uie_input_field,
        lr_column type ref to cl_salv_wd_column.
Set column title and position
lr_column = l_value->if_salv_wd_column_settings~get_column( 'CSINSTA' ).
lr_column->set_position( 1 ).
lv_text = cl_wd_utilities=>get_otr_text_by_alias( 'Z_REFERENCE/REQUEST_NUMBER' ).
lr_column->r_header->set_text( 'Installation' ).
lr_column->r_header->set_ddic_binding_field( '00' ).
lr_column = l_value->if_salv_wd_column_settings~get_column( 'ERFUNAME' ).
     |
lr_column->set_position( 18 ).
lv_text = cl_wd_utilities=>get_otr_text_by_alias( 'Z_REFERENCE/ACTIVITY_DATE' ).
lr_column->r_header->set_text( 'Job profile ext' ).
lr_column->r_header->set_ddic_binding_field( '00' ).
Hide columns
lr_column = l_value->if_salv_wd_column_settings~get_column( 'ERFTSTMP' ).
lr_column->set_visible( 0 ).
lr_column = l_value->if_salv_wd_column_settings~get_column( 'AETSTMP' ).
lr_column->set_visible( 0 ).
lr_column = l_value->if_salv_wd_column_settings~get_column( 'STATUS' ).
lr_column->set_visible( 0 ).
lr_column = l_value->if_salv_wd_column_settings~get_column( 'PRIO' ).
lr_column->set_visible( 0 ).
lr_column = l_value->if_salv_wd_column_settings~get_column( 'ISSUE' ).
lr_column->set_visible( 0 ).
data: lr_functions type ref to if_salv_wd_function_settings,
        lr_function type ref to cl_salv_wd_function,
        lr_button_t type ref to cl_salv_wd_fe_button.
Add self-defined functions in toolbar
lr_functions ?= l_value.
lr_function = lr_functions->create_function( 'SELECT' ).
create object lr_button_t.
lv_text = cl_wd_utilities=>get_otr_text_by_alias( 'Z_REFERENCE/VIEW' ).
lr_button_t->set_text( 'Select' ).
lr_function->set_editor( lr_button_t ).
data : LR_FUNCTION_SETTINGS TYPE REF TO CL_SALV_WD_CONFIG_TABLE.
create object LR_FUNCTION_SETTINGS.
SET row selectable as true
CALL METHOD LR_FUNCTION_SETTINGS->IF_SALV_WD_TABLE_SETTINGS~SET_ROW_SELECTABLE
EXPORTING
VALUE = ABAP_TRUE.
endmethod
Regards,
Kumudha.

Not able to select a row in ALV?

Hi Experts,
I am enhancing a standard e-recruiting WD ABAP component.
It produces a search result as ALV.
I am not able to select any row in ALV by clicking it like we normally do in ALV.
I wrote below code to allow selection:
lo_value->if_wd_salv_table_settings~set_selection_mode( cl_wd_table=>e_selection_mode-single).
Even after this I am not able to select any row by clicking it.
Need help to solve this.
Regards,
Sumit Oberoi

Hi,
To have the inputfields for the ALV.
Get the column references of the ALV table and for each column rference create a inputfield object
type CL_SALV_WD_UIE_INPUT_FIELD.
lo_value is model object.
CALL METHOD lo_value->if_salv_wd_column_settings~get_columns
    RECEIVING
      value = wd_this->lit_columns.
LOOP AT wd_this->lit_columns INTO wd_this->lis_columns.
      lv_id = wd_this->lis_columns-id.
      wd_this->gref_column = wd_this->lis_columns-r_column.
case lv_id.
when ' colname'.
            CREATE OBJECT lr_input
              EXPORTING
                value_fieldname = lv_id.
            CALL METHOD wd_this->gref_column->set_cell_editor
              EXPORTING
                value = lr_input.
when ' colname'.
            CREATE OBJECT lr_input
              EXPORTING
                value_fieldname = lv_id.
            CALL METHOD wd_this->gref_column->set_cell_editor
              EXPORTING
                value = lr_input.
endcase.
endloop.
Or you can take a attribute READ_ONLY for the node to which ALV table is bound.
Set the readonly property to abap_false (for input field) by looping through the table.
Get the column references and get the textview reference for each column and use the set_read_only
method by passing the attribute name.
This way the textview will now become the inputfield when the read_only property is set to abap_false.
Regards,
Lekha.

Not able to select annotation in Adobe Reader X

Hi,
If I hide both toolbar and navigation panel then I am n't able to select annotation in Adobe Reader/Acrobat X. This wasn't the case with earlier version of Adobe.
So is this issue of latest Adobe?
Regards,
Arvind

I checked in version 10.0.1 also. I am not able to select annotation with left mouse button click. This happens only when both toolbar and navigation panel are hidden. You can check this at your end.
And using RMB click, I am able to select annotation. I think this is an issue of latest Adobe as earlier we were able to select using LMB click even when both toolbar and navigation panel are hidden.
Regards,
Arvind

Not able to select lineitems in planner monitor,SAP GRC10 PC

Hello Experts,
We have created plans and we can able to see created plans in planner monitor under assessment planning in NWBC
we can able to select the plan name and send to recipient by using Notify button up to this everything is fine
but when we want to send more than one plans to recipients,not able to select the line items.
any idea to resolve this.
Thanks
GRC Admin

Hi,
Even if you can choose multiple lines by pressing ctrl key, Notification is
allowed for one plan at once. So, it won't allow you to do so.
Regards,
Smita.

Not able to select partial words in pdf

Similar Messages

Maybe you are looking for