Not able to send Email in SOA Suite 12c,getting No matching driver found for delivery type = EMAIL

Hi All,
I am getting following Errror whlie Sending Testing Mail from Human Workflow .
No matching driver found for delivery type = EMAIL
I followed all the steps mentioned in blogs.
Steps that I followed--
1,Downloaded Gmail and Imap Certificate.
2.Imported in Keystore
3.Create a Email driver properties.
Than

Did you resolve this? I am running into the same problem. Not sure if it a configuration issue or an issue with 12c (go figure). I have tried both a blank sender address list and explicitly putting the target address in. Notification mode is set to email. I am using the Notification Test under Human Workflow/Notification Managent. Where else could it be trying to match the driver to EMAIL?
exception.type: ERROR
exception.severity: 2
exception.name: Error status received from UMS.
exception.description: Status detail :
  Status type : DELIVERY_TO_DRIVER:FAILURE,
  Status Content : No matching driver found for delivery type = EMAIL,
  Addressed to : EMAIL:[email protected],
  UMS Driver : null,
  UMS Message Id : dcb01e3ec0a8456856fe8a439e6ecf3f,
  Gateway message Id : null,
  Status Received at : Mon Jan 12 00:49:27 EST 2015.
exception.fix: Check status details and fix the underlying reason, which caused error.
>

Similar Messages

  • Itunes account is under a comcast address along with all my 800  tunes, my .me address is not connected to the music.  how do I get itunes match to work for my iphone

    itunes account is under a comcast address along with all my 8000 +  tunes, my .me address is not connected to the music.  how do I get itunes match to work for my iphone

    U.S. Cellular does not unlock iPhones: iPhone: Wireless carrier support and features - Apple Support
    Sell the iPhone to someone that wants to use U.S. Cellular, and use the proceeds to purchase an iPhone that is usable on the wireles carrier you prefer.

  • Not able to login to esb (soa suite 101034)

    Hiii
    I have soa suite 10134 MLR#7 is installed and using SOA Suite regularly.
    Suddenly today I'm not able to login to ESB Console. The other consoles bpel, em and ruleauthor are working normal.
    In the logs, I got
    java.lang.Exception: Failed to create "ejb/collaxa/system/DeliveryBean" bean; exception reported is: "java.lang.ClassCastException: __Proxy
    2046
    at __Proxy2046.create(Unknown Source)
    at com.oracle.bpel.client.util.BeanRegistry.lookupDeliveryBean(BeanRegistry.java:284)
    at com.oracle.bpel.client.delivery.DeliveryService.getDeliveryBean(DeliveryService.java:299)
    at com.oracle.bpel.client.delivery.DeliveryService.request(DeliveryService.java:85)
    at com.oracle.bpel.client.delivery.DeliveryService.request(DeliveryService.java:55)
    at org.quartz.core.JobRunShell.run(JobRunShell.java:191)
    at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:516)
    Any idea why that is happening !!!
    Edited by: user10545773 on Jul 9, 2009 10:47 PM
    Edited by: user10545773 on Jul 10, 2009 7:55 AM

    Hi
    JDeveloper Extensions (SOA or BPM) do NOT have any relationship to where the JDeveloper is installed (like which middleware home). As mentioned, its better to install JDeveloper in its own home.
    NOW, coming to getting the extensions for BPM or SOA, sometimes the Oracle Site may be down and hence online update may not work. Please see this below post, specially the 2 links I pasted there. I verified, they have downloadables for 11.6 version also. Just download them and apply the extensions manually.
    Re: Unable to connect to Update Center
    Thanks
    Ravi Jegga

  • Could not able to send email notification through approval workflow

    Hi,
    I am trying to send an email notification to the requester and approver on request creation and when the approver approves the request then an email should get triggered to the request with approve/reject outcome. All the SOA configuration has been done and also able to send test email through SOA console but could not able to send email through SOA composite.
    For configuring an email notification, I am using notification tab in ApprovalTask, but still problem is not resolved.
    Please help me in resolving the issue.
    Thanks.

    Use this link to check again whether you have configured the Email driver properties properly. http://www.iamidm.com/2012/09/oim-11g-r2-lab-6-managing-notifications.html
    Also check whether any firewall issue is there which is preventing OIM to contact the email server in sending out emails. Check the logs if there are any issues.
    Also check this system property 'RequestNotificationLevel'. This property indicates whether or not notification is sent to the requester and beneficiary when a request is created or the request status is changed. If the value is 0 for this system property, make it 1.
    I was facing a similar type of issue due to two reasons:
    1. System property
    2. Firewall
    Check both of them and try again.
    Edited by: Durgaprasad on Apr 15, 2013 2:08 AM

  • I'm not able to send emails with mail.ru. Receiving and reading is not a problem. When I create a email with mail.ru its not possible to send it although its stored in my mail.ru account as "still to be send". What can it be??

    I'm not able to send emails with mail.ru. Receiving is not a problem. Creating a mail is also not a problem and the mail will be stored at mail.ru as still to be send, only problem is its not possible to send. I noticed the buttons for sending change colour when used but they don't perform. What it is?

    Don't know what changed, but all of a sudden able to send emails by mail.ru ...... sorry for bothering.

  • My wife and I share the same email address and Apple ID.  We are not able to send and receive Text Messages to one another.

    My wife and I share the same email address and Apple ID. We are not able to send and receive Text Messages to one another. Is the cause of this because we share the same Apple ID? Will we have to set up 2 separate primary email addresses to be able to  send and receive Tex Messages to one another? Like I said, we share the same email address and woul like to keep it that way to keep up with our email together. Is there a way to by-pass having to set up 2 primary emaill addresses if this is the problem?
    Thanks.

    go to the settings and turn off imessage
    but that don't change the issue that you will never be able to facetime eachtoher
    the appleID is really meant as the handle that identify you it was not meant to be shared
    but can see that people may want to do not buy apps more then once

  • I am all of a sudden not able to send emails out from my outlook account on my iPhone.  Any suggestions?

    I am not able to send emails out from my outlook account on my iPhone 4s.  This feature has been working fine for 2 years and all of a sudden decided not to work.  I was able to receive emails but not send out.  I tried deleting the outlook account and recreating it but now I can't even recreate it.  It tells me it cannot verify my account information.  The interesting thing is that the account works fine on my PC, so I know my login info is correct.  Any help would be appreciated.
    Thanks

    Hello tmed32
    Check the website and log into webmail to see if there is anything you need to add to authorize it on other devices. Also check out the articles below to see if they can provide any further assistance.
    iOS: Setting up an Outlook.com, Hotmail, Live, or MSN email account
    http://support.apple.com/kb/ht1694
    iOS: Troubleshooting Mail
    http://support.apple.com/kb/TS3899
    Regards,
    -Norm G.  

  • TS3899 I have just set up an exchange email account and am not able to send emails, but I can receive. I have the exact same email account set up on my older IPad and it works fine. The account also works fine on my I phone. The new IPad was set up by my

    I have just added an exchange email account to my new IPad2. I am able to receive emails but I am not able to send messages from this account. I have the exact same account set up on my Old IPad and iPhone and am ble to send and receive. My work (where the server for this account is) gave me the IPad and set up the apple account. What am I missing?

    You might want to try removing they email account and setting it back up again

  • I am using i pad mini. I am going through a issue in which i am not able to send mails to my work email add wherein i am able to receive emails from same email id.

    i am using i pad mini. I am going through a issue in which i am not able to send mails to my work email add wherein i am able to receive emails from same email id.

    With one mailbox server in the production site and one in the DR site, you do not have high availability.  If the main site goes down, the cluster loses quorum and all databases dismount.  You must then force quorum or move the file share
    witness to restore quorum.
    I can't tell you why what you observed happened.  At the time of the problem I would have been looking at the transport queues to see what's queued and to where.
    I recommend you look at the configuration of your send connectors to ensure that none of them are dependent upon the DR site server.
    To send mail outside, you must allow relay.  To do this, I recommend you create a new receive connector that's configured to allow relay and restrict access to the application server to keep anyone else from using it to relay.  There are plenty
    of articles on the Internet that describe how to configure a relay connector.
    Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

  • Since yesterday I'm unable to send emails alleging I have exceeded the maximum number of emails per day, but I had only sent out 24 and NO bulk emailing -  (much less than 1000 as per the website) and I'm STILL not able to send emails.Any advice?

    Since yesterday I'm unable to send emails on any of my Apple devices. The revert is that I have exceeded the maximum number of emails per day, but I had only sent out 24 with no bulk emailing -  (much less than 1000 recipients as per the website) and I'm STILL not able to send emails. Any advice on how to solve this?

    I have asked a moderator to provide assistance, they will post an invite on this thread.
    Once you get a reply, if you click on their name, you will see a screen like this. Click on the link as shown below.
    Please do not send them a personal message, as they may not be on duty for a long time, and your message will not be tracked properly.
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • [SOLVED] Evolution :: not able to send email

    HI
    It was working before, but now I am not able to send email over work {office} smtp server.
    I have two accounts in Evolution, work and personal. For personal I am using my own debian server with postfix and I can send email over that.
    I did contact hosting company who we are using for work smtp server and they are saying that there is no incaming connection for my acount in time when I am trying to send email.
    I did install Thunderbird, wow, I can send email from work and personal account and with same configuration as evolution, port 25 with and without security (TLS).
    I think it is cleary problem of evolution, can someone explain me what could happen?
    Friend visit me today, He is using Evolution too, but he is running MINT, same problem.
    thanks for comments
    Last edited by jancici (2012-02-03 08:16:48)

    Thanks, I was trying to check trafic on router, and I did not see where the problem is, well I did not check IP.
    Now, tcpdump show me the problem. I am using OPENDNS and here is output from tcpdump:
    08:52:14.287372 IP frodo.49219 > hit-nxdomain.opendns.com.smtp: Flags [s], seq 1810390044, win 14600, options [mss 1460,sackOK,TS val 34963370 ecr 0,nop,wscale 6], length 0
    E..<#.@.@.|...TdC.A..C..k.\.......9............
    08:52:15.288964 IP frodo.49219 > hit-nxdomain.opendns.com.smtp: Flags [s], seq 1810390044, win 14600, options [mss 1460,sackOK,TS val 34963671 ecr 0,nop,wscale 6], length 0
    E..<#.@.@.|...TdC.A..C..k.\.......9............
    08:52:17.292307 IP frodo.49219 > hit-nxdomain.opendns.com.smtp: Flags [s], seq 1810390044, win 14600, options [mss 1460,sackOK,TS val 34964272 ecr 0,nop,wscale 6], length 0
    E..<#.@.@.|...TdC.A..C..k.\.......9............
    checking again configuration of evolution and there is wrong spelling of smtp server.
    well, now I am confused, hot that happen.
    okay, thanks for help.

  • Not able to send emails via Mail anymore !?!?

    Very bizarre : since yesterday night, we are not able to send emails from all of our 3 accounts !?!?!? When we are sending an email Mail always ask us to enter our password. If not Mail says that we should choose another server to send our email but then after it keep asking us our password and the message always stay in my sending box ? Is there a way to solve that problem ?
    Thanks in advance

    Greetings,
    That sounds like a Mail issue (not iCal). You may get better response if you post in the Mail forum here:
    http://discussions.apple.com/forum.jspa?forumID=1338

  • Ipad and iPhone not able to send photos via email or text

    My iPad2 and iPhone (5s) are not able to send photos via emails or texts. They communicate with each other in sharing the photos but I can't send them out anywhere. Anyone have suggestions?

    You can choose Outlook Express by following steps:
    1) Launch Starter Edition.
    2) Choose Edit menu >> Preferences or press Ctrl + K, to launch preference dialog.
    3) Choose Email from side menu on preference dialog.
    4) in Client, 'Send Email Using :' set"Outlook Express" and press 'Ok'
    You are reasy to share your images.Let me know if it helps.
    Cheers!!!
    Agrawal

  • EDGE is in small letters and therefore I am not able to send/receive emails.

    Hi friends,
    I have recently purchase 8520 curve. I am not able to send /receive emails in my mobile because the word edge appears in small letters . Please help me by letting me know the procedure to solve the problem.

    Did you subscribe for BIS or paid the amount to your service provider? If so call them and request assitance with setting up your BB for internet. If you are already subscribed you can check on Manage Connections, Mobile Network Options, Data Services should be set to "On". But I suspect your BIS is not configured by your service provider so call them.

  • I'm not able to send email messages because my send option is not highlighted

    I'm not able to send email messages because my send option is not highlighted

    It appears you might need a Yahoo plus account to utilize it as an SMTP server.    The server address is plus.smtp.mail.yahoo.com
    Other than that, I would contact Yahoo support directly.  Ask them if they require password authentication. If they do, usually your e-mail address is your username.  Often they require port 587, 2626, or 2662.  Only Yahoo would know for certain which one to use.

Maybe you are looking for

  • AUDIGY ADVANCED

    Hi, I have recently bought a dell inspiron 9400 and it had an option in the programe menu to upgrade my current adio to sound blaster audigy advanced mb. so i did it and paid for it. at the end there was a message saying " you sound blaster audigy ad

  • ITunes does not turn on when iPhone attached.

    I know I'll feel stupid after somebody gives me the answer to this. But, what the heck, if I don't ask I won't get. So here it goes: My iTunes does not turn on automatically when I attach my iPhone to my Mac. I have to open the application manually.

  • JMS Adapter - Consuming empty opaque element

    Hi All, In a BPEL(lets say BPEL A) using JMS Adapter I am posting an message/payload into JMS Topic as Opaque element using produce_message. Now in another router(Bpel B) I am listening to this topic using consume_message and trying to retrive the me

  • Idoc unable to hit XI

    Hi All, Im actually executing the MM-SUS pre-shipped SAP scenario in XI. I have triggered the purchase order in the form of Idoc (orders.orders02) to XI (trans: me22n) It shows the status 03 in we02. but the idoc is not hitting xi and i dont see any

  • How to customize the link between archivelink and Alfresco

    hi, We are using Alfresco as content manager and we want to scan the invoices according to the "Late Storage with Bar Codes in FI" scenario [http://help.sap.com/saphelp_470/helpdata/en/46/c4317ffc4b11d195650000e82deb58/frameset.htm]. Each scanned inv