Not able to send files to my Mac via bluetooth.
Hey i have mac os x 10.5, i am not able to sen files to my mac from my blackberry 8520. I have paired my bb and mac but when i try to send files from my bb it says "Failed to find service".
Please help.
Thanks.
Hi
go to system preference
and go to sharing
enable blue tooth sharing
Hope it helps
LH
Similar Messages
-
How do I send files from my IMAC via bluetooth to my new Ipad? They will not "pair" but they are connected and discoverable. I send a file from Imac snow leopard OS X 10.6 to the ipadusing bluetooth, but the failure message says the ipad does not have the necessary services. What are these? Do I neeed to have iphoto and ms word to send pix and .doc files?
File Sharing over Bluetooth is not a feature of iOS devices. iOS does not include the required Bluetooth profiles to allow this. You cannot add this feature, so you may as well stop trying.
-
I can't send file from my macbook via bluetooth
I have this problem, I can't send files from my Macbook with bluetooth. When I click on send a file nothing happens, as if I didn't clck at all. I can still receive files though. It was working last week and I haven't changed my settings since. I checked and everything was still enable. I installed Mackeeper not long ago, I scanned the computer and made a cleanup shortly before it stopped working, I dont know if it could have been the cleanup, but it's troublesome since that was how I transfered my music on my mp3 player. I made a software update too and it didn't change a thing. Please help!! I don't know what to do!
I guess I'm stumpted. If the iMessage server is telling you that the recipient's email address/phone number is not registered with iMessage when in fact they are, somehow it's not looking it up correctly (as it is when you try from your phone). Signing out of the account in preferences, then signing back in is about the only thing I can think of to "restart" iMessage. I suppose you could try signing out again, then restart your Mac and sign back in. If you didn't restart your Mac after you signed out of iCloud, you could try that too. If none of that works, you'll probably have to contact Apple support for assistance.
-
Not able to send file Using FTP in SSIS 2005
I am using SSIS 2005
I am trying to send file to ftp server using FTP task in SSIS but i am getting following error.
Error Message-:An error occurred in the requested FTP operation.
Detailed Description-:550 /FileName.txt: Access is denied.
RemotefilePath is /
I need a advice.
Thanks in advance.I got this error recently from the FTP task in SSIS:
Unable to send files using "FTP".
I had everything correct, by the book. I was trying to send a file, but I got the same error when trying to receive a file.
I already verified that I could send the file via command line FTP, so the FTP was not "secure FTP" (which wouldda required FileZilla or WinSCP or something similar) and my credentials were fine.
But I still got the above error. Heck, I was beginning to thing that the FTP task in SQL Server 2008 was broken and just couldn't send files.
Well, this issue is now resolved. The problem was in the
destination folder. I was assuming that the root folder for my FTP account held the files.
So I entered the destination folder as this:
/data_in/
But... the FTP task sees the root folder as one up from that.
So I had to use my account name in the path... meaning I had to change the destination folder to this:
/myaccountname/data_in/
(where "myaccountname" was my login to the FTP site.)
I hope this post helps someone else.
Donna -
When i plug my external hard drive into my mac i'm able to see all the files on it and move files off the hard drive to the mac, but not the other way around. I need to make more room on my mac and would really like these files to be on this particular external hard drive. Any help would be great!
Thank you
KrisThank you all. Sounds like i might as well buy a new (mac OS supported) external hard drive. Not worth the hassle/risk of taking all the old files off my current external HD.
Really appreciate all your help!
Kris -
Help me send files from my Mac to my BlackBerry
Friends:
I'm trying to send files to my BlackBerry via BlueTooth with no luck. I attempt to initiate receiving the files from my BlackBerry prior to sending it from my Mac, but I get the following error:
"File Transfer Connection Failed" (the file doesn't even begin to transfer)
Oddly enough I can send files from the BlackBerry via BlueTooth easily.
Sharing via BlueTooth is enabled on the Mac.
In manage connections, the the BlueTooth is ON but it has a little dash next
to the checkbox, not a green check mark like Wi-Fi and the Mobile Network do.
Thanks for your ideas!
Migshttp://discussions.apple.com/forum.jspa?forumID=1003
http://www.howardforums.com/
I've found the easiest way on leopard(or panther & Tiger) is to use my ISP's web mail, and bear in mind I am using an LG phone and Verizon, to sent a message and attachment to my phone by To: [email protected] and then it comes to cell phone. I don't know if your carrier has such a # to send data like verizon does. Probably does. Depending on what machine and OS X I'm using, it all seems to work different. There are modem scripts in /Library/Modem\ Scripts for usage. But then Leopard Syspref seems to have a different style to setup those modems. Bluetooth is about like a chain saw. Tough, at best to start, sometimes. -
Sender File Adapter not able to get file via FTP from an external system
Hi,
I have a Sender File Adapter using FTP which polls a server every 10 seconds looking for a file ".xml". The adapter will connect and pick up the waiting file, but sometimes the adapter not able to get file via FTP from an external system. The file is on the server, but despite the polling, the adapter does not pick up it. There is no return error.
The connect mode is Permanently and the transfer mode is Binary.
Can you help me?
Thanks.
T.Hi Teresa,
does this case appears with a file size higher the others?
Personally, I do not recommend to have a polling under 1min.
10s could be too just, if the file is not small and/or if the file server is far (several kilometers) to where the Adapter Engine is, and/or this file server is beside a firewall. Do not forget also that, with previous points, you could have like a conflict, betwen the 1st polling and the 2nd polling, if in less 10s PI adapter has not enough time: to connect to the FTP server (several Km), find the file (perhaps among 100 other files in the directory), go back to the file to Adapter Engine server (several Km again), convert your file to XML message (with a complex Content Conversion), then check the XML structure, and when all that is done, return back to FTP server (several Km), to archive the source file... Well It's my understanding of a FTP exchange with FILE adapter...
If you really need a 10s polling, that's mean your have a pseudo real time interface. In that case, in my mind file should not be used! but we should use a Web service, JDBC JMS (any exchange without a physical object like a file). For me, it's a non-sens to have a file in that case.
regards.
mickael -
I have PDF files in iBooks on my iPad and am not able to sync them to my Mac computer. Please help!
You should be able to copy them over to your Mac's iTunes by connecting the iPad to it and doing File > Devices > Transfer Purchases (that should copy PDFs and epubs that are in iBooks, not just actual ibooks) - does that not work ?
-
I am not able to send my photos from my IPhone to my Mac. I went to my Cloud preferences and it is not allowing me to click on Photo Stream. When I went to "updates" is says I am updated.
with no information no one can help
what versions of software? have you followed the directions in this article - http://www.apple.com/icloud/setup/
LN -
I have a mac book pro. Since i updated to OS 10.8, I have experienced the following:
many of the programs don't respond.
Not able to transfer file (eg pdf file og movie (VLC).
The tech tool diagnostic software (as part of apple care protection plan) stops in the middle of scanning.First, know that if you have any old PPC-only applications they will no longer work. You should uninstall them completely. Secondly, applications that don't work may require upgrades for compatibility with Mountain Lion. Thirdly, you may have a dysfunctional upgrade for which you should try this:
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless. -
Notification mailer is not able to send mails to Outside domain i.e gmail
Hi All,
We are in 12.1.3 EBS application with 11.1.0.7 DB on Aix 64 bit platform:
resently we configured notification mailer with out any issues
But the issue is notifications are delivered to with in the domain itself but not to outside the domain i.e gmail and yahoo
SMTP server host name is owa.craftsmanautomation.com the same we used to configure the Notification mailer
Even we verified from os level using telnet utility as follows:
$ telnet owa.craftsmanautomation.com 25
Trying...
Connected to 192.168.5.8.
Escape character is '^]'.
220 Capl-cas01.CRAFTSMAN.LOCAL Microsoft ESMTP MAIL Service ready at Thu, 12 Jul 2012 14:03:47 +0530
EHLO CAPL-PROD
250-Capl-cas01.CRAFTSMAN.LOCAL Hello [192.168.5.12]
250-SIZE
250-PIPELINING
250-DSN
250-ENHANCEDSTATUSCODES
250-STARTTLS
250-X-ANONYMOUSTLS
250-AUTH NTLM
250-X-EXPS GSSAPI NTLM
250-8BITMIME
250-BINARYMIME
250-CHUNKING
250-XEXCH50
250-XRDST
250 XSHADOW
MAIL FROM: [email protected]
250 2.1.0 Sender OK
RCPT TO: [email protected]
250 2.1.5 Recipient OK
DATA
354 Start mail input; end with <CRLF>.<CRLF>
Subject: Test message
Test message body
250 2.6.0 <[email protected]> [InternalId=85753] Queued mail for delivery
quit
221 2.0.0 Service closing transmission channel
Connection closed.
In the above command in place of FROM and TO mail-id's if we use any personal mail-id's getting error message as "Unable to Relay".Please suggest is there any changes we need to done at SMTP server Level or OS level or Application Level.
Thanks in Advance925263 wrote:
Hi Hussein,
Thanks Alot for your reply.
Currently we changed the SMTP Server(mail.craftsmanautomation.com).we used anoth SMTP server to configure Notification Mailer.Because previous one(owa.craftsmanautomation.com) is not able to send mail's to outside domains.
But in this case we got the below error message while testing.Below error message we captured from the output file of the script Oracle Workflow ATG Support: R12 Java Mailer Setup Diagnostic Test.
ERROR
[Nov 10, 2012 1:32:45 PM GMT+05:30]:1352534565017:-1:-1:capl-prod.craftsmanautomation.com:192.168.5.13:-1:-1:1:20420:SYSADMIN(0):-1:Thread[outboundThreadGroup1,5,outboundThreadGroup]:192.168.5.13:84096:1352529863628:11:ERROR:[SVC-GSM-WFMLRSVC-110812-10006 : oracle.apps.fnd.wf.mailer.SMTPOutboundProcessor.send(Message)]:Problem encountered when sending to {[[WFTEST <[email protected]>]]} -> javax.mail.SendFailedException: Invalid Addresses;
nested exception is:
class javax.mail.SendFailedException: 554 5.7.1 <[email protected]>: Sender address rejected: Access denied
Please see these docs.
Email Not Received javax.mail.SendFailedException: Invalid Addresses [ID 876835.1]
Workflow Notification Mailer Unable to Send E-Mail Notifications [ID 374804.1]
Unable to Email Proposal Documents to an 'External Address' [ID 1126223.1]
How to address Email Center: Outbox Processor Error: Invalid Addresses [ID 1399427.1]
Thanks,
Hussein -
not able to open mail from my mac, gmail repeatedly asking for password. but using same password able to open gmail on safari
okay well they got me to take out some .plist files to see if that would help it didn't. I'm not sure what ones that they deleted for my self maybe someone here would be abel to tell you what ones to take out but didn't work the one that came close to working was this going into keychain and deleting the account(s) then reading them again.
if you are to do this please back up first with Time Machine. You can do this with a usb drive.
Okay so go back to where you had internet accounts and make sure mail is shut. click the - on the account your having problems with then quit system preferences.
Okay so then press cmd and space bar at the same time then type 'keychain access' into the search then click on 'keychain access'
once it is open go to the top of the window and put your email address that you are having problems with.
once you have put in your full email, have a look at what comes up i deleted things in the kind colome with 'internet password' and anything with under name that had smtp.gmail.com or imap.gmail.com so it would look like this, map.gmail.com - internet password.
right click and delete them. make sure not to touch any other files that dont say them things on them.
Once you have done this quit keychain access and then restart the computer, once the computer is restarted go back to system preferences and internet accounts and re-add the account.
Hope this helps. if something is not clear just ask. -
Not able to get file from application server with read dataset
Hi,
Firstly i download a file from application server from read data set and then i sent this file as attachment. But problem is that i am able to send .jpg .bmp file but i am not able to send .pdf or .doc file so what can i do for that. ?
My code is like below...
DATA : PATH TYPE STRING.
DATA: E_FILE LIKE RLGRAP-FILENAME.
CONCATENATE '/tmp/' NAME_WITH_EXT INTO E_FILE SEPARATED BY SPACE.
CONDENSE E_FILE NO-GAPS.
IF EXTENSION = 'TXT'.
OPEN DATASET E_FILE FOR INPUT IN TEXT MODE ENCODING DEFAULT WITH WINDOWS LINEFEED . " MESSAGE MSG.
IF SY-SUBRC <> 0.
WRITE: SY-SUBRC, MSG, ' LIKE ', C_FNAME.
ELSE.
WHILE SY-SUBRC = 0.
READ DATASET E_FILE INTO WA_C.
IF SY-SUBRC <> 0.
EXIT.
ENDIF.
APPEND WA_C TO IT_C.
ENDWHILE.
CLOSE DATASET E_FILE.
ENDIF.
ELSE.
OPEN DATASET E_FILE FOR INPUT IN BINARY MODE. " ENCODING DEFAULT. " INPUT IN BINARY MODE . " TEXT MODE ENCODING NON-UNICODE.
IF SY-SUBRC = 0.
DO .
READ DATASET E_FILE INTO GS_PDF_TAB.
IF SY-SUBRC = 0.
APPEND GS_PDF_TAB TO GT_PDF_TAB.
ELSE.
EXIT.
ENDIF.
ENDDO.
CLOSE DATASET E_FILE.
ENDIF.
ENDIF.
Regards,
Gurprit Bhatiadelete this line DEFAULT WITH WINDOWS LINEFEED and check this..
-
i am using i pad mini. I am going through a issue in which i am not able to send mails to my work email add wherein i am able to receive emails from same email id.
With one mailbox server in the production site and one in the DR site, you do not have high availability. If the main site goes down, the cluster loses quorum and all databases dismount. You must then force quorum or move the file share
witness to restore quorum.
I can't tell you why what you observed happened. At the time of the problem I would have been looking at the transport queues to see what's queued and to where.
I recommend you look at the configuration of your send connectors to ensure that none of them are dependent upon the DR site server.
To send mail outside, you must allow relay. To do this, I recommend you create a new receive connector that's configured to allow relay and restrict access to the application server to keep anyone else from using it to relay. There are plenty
of articles on the Internet that describe how to configure a relay connector.
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems." -
have downloaded flip4mac to watch .avi files on quicktime but still not able to access files. Any suggestions? Thanks L
Flip4Mac plays Windows Media content, not AVI content. The codec needed to play those specific AVI files is most likely part of Perian or VLC but may not exist for Mac OS X.
(97189)
Maybe you are looking for
-
I started out just simply trying to update my iphone 5 to ios 8.2 and it got stuck on the itunes plug in screen. I had to wait till then next day to ask my boyfriend to fix it because I have a chromebook and it can't get itunes. He did everthing appl
-
Web URL application in Dynamic Navigation
Hello all, in the dynamic navigation window I run an URL iview with HTML application with javascript. I receive in the dynamic navigation window an EPCF event with EPCMPROXY calls. After I receive the event I would like to navigate within the dynamic
-
Printing of pdf document from java application
Hello, I want to print out a pdf document which I get from a server as a byte-stream. I don't want to display or preview it on the client but print it out right away. Is there a way to do this? Thank you very much! Matthias
-
Read Time out error while posting XML file
Hi While posting the XML file from .NET application to XI I am getting following error : com.sap.engine.services.httpserver.exceptions.HttpIOException: Read timeout. The client has disconnected or a synchronization error has occurred. Read 62127 byte
-
I originally downloaded the trial version for evaluation two days ago and everything was working fine. As of yesterday the program is crashing constantly (every 5 - 10 minutes) when I am editing videos with MP3 sound and mpg video files. It crashes