Not able to set date and time

I have a problem with automatic date and time will not initiate. I have wireless connection verified; my DHCP is properly configured, the latest i-Tunes software update, homesharing ID matched with computer and security firewall verified configured properly for allowing all incoming connections. Second Apple TV 2 bought in past two days where it will not update wirelessly. Is this a port problem, NTP, or related to software update that went wrong?
Contacted router vendor to troubleshoot their device. Verified with my computer, the wireless router works. Has anyone seen this problem before?
Thanks!

Welcome to the Apple Community.
If you have previously been able to use your Apple TV without this problem, you might try restarting the Apple TV by removing ALL the cables for a 30 seconds. if this doesn't help try a restore.

Similar Messages

Network not able to set date and time

Live outside of US and have my new Apple TV set to my Air Express WiFi network but I have not found a way to set the date and time. I have set my region time zone but stll no luck. I cannot move forward with the installation until I resove this problem. So far my Apple TV is only good for Air Play of my Spotify music and YouTube. Without date and time can't even set iTunes. Help!

Welcome to the Apple Community.
Assuming this is not the first time you have used your Apple TV
You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
Also try restarting the router. (Also try removing it’s power cord for at least 30 seconds)
If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
If restoring from the Apple TV doesn't help, try restoring from iTunes using a USB cable.
If this is a new Apple TV, in addition to trying the above, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123.

My apple TV not able to set date and time

Pl let me know how to signin in iTunes in apple as date and time is not working

Assuming this is not the first time you have used your Apple TV
You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
Also try restarting the router. (Also try removing it’s power cord for at least 30 seconds)
If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
If restoring from the Apple TV doesn't help, try restoring from iTunes using a USB cable.
If this is a new Apple TV, in addition to trying the above, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123.

Not able to adjust date and time - format does not permit

Hello,
I just scanned one old photo as a JPG and then imported it to Aperture 2, I renamed the file 1976-07-01_01.jpg based on the date the pic was taken. Then I tried to adjust the date and time in Aperture but got this error window:
"Unable to adjust master file
Aperture was not able to adjust the date and time of the master file "pic.jpg" because it has a format that does not permit date modification."
What next?

I am having a similar problem. The time is off by 12 hours exactly (ahead). When I touch date and time, screen goes black for less than a second and then reverts to main screen with all of the icons. I have first generation touch and just noticed this problem. All of the software is up to date. Any one know of a fix for this?

Not able to adjust Date and Time

For about a month now I haven't been able to manually adjust the time and date. Everything else on my iPod works fine... but when I click to change time and date it just goes black for about one second then goes back to the main menu. I don't think anything has been added to it that is unsafe.. but to be sure I scanned all my folders that are on my iPod and then scanned my entire computer. Nothing came up in the scan.
I do have the most up to date version of the software that is out.
It currently says that it is Friday, February 23, 2007 at 5:33pm. It changed it's time and date on it's own... I can't correct it.
So if anyone knows how to fix this please tell me how.

I am having a similar problem. The time is off by 12 hours exactly (ahead). When I touch date and time, screen goes black for less than a second and then reverts to main screen with all of the icons. I have first generation touch and just noticed this problem. All of the software is up to date. Any one know of a fix for this?

"RT Set date and time" does not set seconds in UTC mode

Hallo,
I tried to set the time on my cRio 9012 with the function settimeUTC which is used by the "Set Date and Time" vi. But the seconds I enter are ADDED to the current time and not set as new value.
Even the vi shows this behaviour: I set up a vi in which the time is set in a loop (100ms delay) and read again. When I set local time the clock stops (as expected) but when I set the UTC time the seconds keep on running...
Can anybody help me with that problem???
Thanks
Florian
Solved!
Go to Solution.

Hi Andreas,
well it does not matter if I set a time zone in the MAX or not. In my example I was working on UTC + 0 but even when I set it to my local time (UTC + 1) I get the same behaviour modified by one hour.
My LabView Version is 8.5. In in the MAX under Software-> LabView-RealTime it says that I am using 8.5.0.
I suspect that the settime.out which is installed on the cRio is probably the root of the problem as VxWorks itself does not offer a function (at least I did not find one) to convert from broken down system time to system time in seconds. There only exist one to convert from broken down local time to system time in seconds ( mktime() ). The reverse function is available for both cases: gmtime() and localtime(). I also did not find a way to find out the offset of the local time. So I have to use the library function settimeUTC() from settime.out.
As I offered I can send you the settime.out file from my cRio for reference or maybe you can tell me how to find out what the version of the file is. It seems not to be an ELF file as I looked inside it to find some timestamp or version info...
Thanks so far
Florian

Can not set date and time

i can't not set date and time i live in florida and i am visiting hawaii.Brought my apple tv and airport express , created my own network to watch my apple tv but unable to set date and time on my apple tv.Pleas help.

Assuming this is not the first time you have used your Apple TV
You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
Also try restarting the router.
If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
If restoring from the Apple TV doesn't help, try restoring from iTunes using a USB cable.
If this is a new Apple TV, in addition to trying the above, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123.

Can not set date and time on a new Apple TV

can not set date and time in a new appletv

Hello lfsalas55,
You may need to verify that TCP port 123 on your router is open and available for use by your Apple TV.
Apple TV: TCP and UDP ports and protocols used
http://support.apple.com/kb/HT2463
Cheers,
Allen

TS4268 I changed set date and time automatically to "no" and I was able to activate iMessage. This seems contrary to all the troubleshooting discussions I've been reading.

Is there any definitive info on this subject?

When ATV is setting date and time, and hangs there, it usually indicate there isn't a network connection. Is your router still working, is the Internet for all the other computers on the same network working? Have you tried changing from WiFi connection to Ethernet or vice versa?

Keychain problem and "Set date and time automatically"

Something very strange appened to me today. I spent a few hours to get it through.
All starts when I decided to open System Preferences and *set date and time manually* (I lost date and time because I left my PowerBook without its battery for an hour). At the next login, Leopard was no more able to access keychain's stored passwords, even if all items on Keychain Access were right there. Everytime I tried to read one item's password, a pop-up window reminded me that I had not the right to do it. As soon as I set back "date and time" on automatic (time.euro.apple.com - for me) all became normal (all iCal reminders appeared at on time) and all services started to get their passwords from the stored list.
Sorry for my English (I'm from Italy).
Someone got the same issue?

That looks like the correct IP address for the Apple NTP. Not sure why your AEBS is not getting the time stamp.
Would you mind double-checking the following setting, using the AirPort Admin Utility?
AirPort Tab - Base Station Options: Logging/NTP
- Set Date & Time Automatically: time.apple.com (checked)
Is it possible that you have UDP blocked on port 123? Is your AEBS connected to another Internet router?

My AppleTV cannot set date and time. I've reset it, but after 3 hours, it is still trying

My AppleTV used to work fine. Someone messed with my Time Capsule, so I had to have it worked on. Since it was messed up, the AppleTV can't function. I reset it and updated everything. It said "Activating" and "setting date and time". After 3 hours, it is still trying to set the date and time. Now what do I do? Thanks for any help.

As I previously wrote in a former post:
I will first assume you are still setting up your new Apple TV. Is this is the case, use a website like canyouseeme.com to check if port 123 is open. If it is not, this is your issue of your Apple TV not being able to connect to the timeserver. Try contacting your Internet Service Provider for help with opening this port.
Otherwise, try hard resetting your Apple TV by disconnecting all power for 30 seconds. If the problem still persists, you may try hard resetting your router by also unplugging all power for 30 seconds.
Hope this worked out well for you. If you are having further troubles you can always connect it to iTunes using a micro-usb and restore it. Lastly, the Genius Bar will be more than happy to fix the problem for you if you'd like to make a reservation for your local Apple Store.

HT1595 Stuck on Setting Date and Time

Will not set Date and Time (just keeps trying).

I was able to get my Apple TV working again by downgrading the firmware following the instructions in this message:
https://discussions.apple.com/message/20008613#20008613
In case that message disappears, here's my translation:
1. Connect your Apple TV to your computer via USB. Don't plug in the power cable.
2. Download the older 5.0.2 firmware from Apple here:
5.0.2 (Apple TV 2): AppleTV2,1_5.0.2_9B830_Restore.ipsw
5.0.2 (Apple TV 3): AppleTV3,1_5.0.2_9B830_Restore.ipsw
3. Open iTunes and select the Apple TV. Hold down the option key and press the restore button at the same time.
4. In the dialog that opens select the firmware that you downloaded.
5. The restore process will take a few minutes. Once it's done plug your Apple TV back into your TV. If the date and time message persists just press the menu button to skip it. This got mine working again.

Trying to setup my new ATV and it won't set date and time, and won't allow me to log in with my apple ID.

Trying to setup my new ATV and it won't set date and time, and won't allow me to log in with my apple ID to homeshare OR to test te network, which I know is correct since I changed it. I live in an apartment complex and the router is in my roommates room. ANY suggestions? I'm at the point where I may return this because it has been nothing but a hassle. I'm very annoyed and just want the product that I paid for to actually work.
The ABOUT section says Network Time: Skipped (reachable) and Activation: Failed (skipped)
I'm also using my MacBook Pro as the homesharing with iTunes up to date.

I had a similar issue wuth my new Apple TV. If you (or your roommate) are able to change the router firewall settings, do that first. I don't know the ports that you need, except that 123 is one of them (to set the time). Then restart the Apple TV. See if that will get you through the activation process. I actually ended up restoring mine to factory settings, but I'm not sure if that step was really necessary.
I understand your frustration, though. Getting the Apple TV to work was such a pain -- it almost feels like it is not really an Apple product.

HT1595 My apple tv stuck at setting date and time. Also when connecting yo network doesn't ask for network password

My apple tv stuck at setting date and time. Also when connecting yo network doesn't ask for network password

I just went through this last night. (Aug 15, 2013)
What I did to get back up and running. This is not the first time I have lost the network connection with my Apple TV 3
Products effected: Apple TV 3 and Home Sharing (My Apple TV 1 was not effected)
Power down (unplug) the Apple TV and power down your router ( in my case, it is a FIOS router, flipping the on/off works fine).
Power both items back up.
At this point, I usually can reenter my Apple ID and PW. and reconnect Home Sharing. But for some reason I was unable to reconnect last night but was able to get it reconnected in the morning. I was jut to tired to deal with it last night.
A new issue that is was able to fix after a good nights sleep.
I did figure out, (after trying to reenter my ID and PW many times and having it tell me that my ID and PW was wrong), that when using the Apple TV on screen keypad to type in the user ID. DO NOT use the ".com" keypad button. Instead type out each character for .com. ( or what ever ending you use for your ID account.)
Once I typed out my full ID and PW. everything is back to 100%

Iit is setting date and time but keeps going in circle . but never sets up

Try to use apple tv. But when turn it on. It is setting Date and time? But the cursur is just going around and around and nothing happen for a while. It doesnt set the time or date, so can watch apple tv.?why?

I have had this frustrating problem twice. Combinations of resets, restores, restarts of routers etc have been generally unsuccessful.
My Apple TV2 has full internet connectivity (through a internet cable, connected to a D-Link gigabit switch, connected to a Generation 4 Apple Time Capsule, connected to a high speed Comcast ARRIS modem).
The Apple TV2 works well with AirPlay, Youtube, HD movie trailers, HomeSharing music and photos, etc, but won't connect to NetFlix, allow movie rental, or allow iTunes purchased home computer programs to display due to not being conneted to an iTunes account.
And I can't connect to the iTunes store because the "time and date cannot be set".
Note that my iMac is connected to the same gigabit switch as my Apple TV2 and it can automatically set time and date, just fine. I tested by turning off the auto set, setting the wrong time, then turning it back on and having the system time and date properly reset... twice!
This time, my problem was solved by going into the Time Capsule, changine IPv6 setting from HOST to "Local Link". The Apple TV2 immediately knew the time and was able to connect to the iTunes store.
I recall that last time I "fixed" this problem, I changed that same setting from Local-Link to Host.
I agree with lagoed, Apple should fix this vexing problem, the sooner the better.

Not able to set date and time

Similar Messages

Maybe you are looking for