Not able to start DB after adding node

Hi all,
I have successfully added node RAC3 in 11gR2 RAC in RHEL5 Platfiorm
while starting DB I am getting the below error
[root@rac1 bin]# ./srvctl status database -d dev
Instance dev1 is not running on node rac1
Instance dev2 is not running on node rac2
Instance dev3 is not running on node rac3
[root@rac1 bin]# ./srvctl start database -d dev
PRCR-1079 : Failed to start resource ora.dev.db
ORA-29760: instance_number parameter not specified
CRS-2674: Start of 'ora.dev.db' on 'rac3' failed
CRS-2632: There are no more servers to try to place resource 'ora.dev.db' on that would satisfy its placement policy
[root@rac1 bin]# ./srvctl status database -d dev
Instance dev1 is running on node rac1
Instance dev2 is running on node rac2
Instance dev3 is not running on node rac3
[root@rac1 bin]#
[root@rac1 bin]# ./srvctl start database -d dev
PRCR-1079 : Failed to start resource ora.dev.db
ORA-29760: instance_number parameter not specified
CRS-2674: Start of 'ora.dev.db' on 'rac3' failed
CRS-2632: There are no more servers to try to place resource 'ora.dev.db' on that would satisfy its placement policyPlease suggest me...

I m getting the below :
[grid@rac3 ~]$ srvctl start database -d dev
PRCR-1079 : Failed to start resource ora.dev.db
ORA-01078: failure in processing system parameters
CRS-2674: Start of 'ora.dev.db' on 'rac2' failed
ORA-01078: failure in processing system parameters
CRS-2674: Start of 'ora.dev.db' on 'rac3' failed
ORA-01078: failure in processing system parameters
CRS-2674: Start of 'ora.dev.db' on 'rac1' failed
CRS-2632: There are no more servers to try to place resource 'ora.dev.db' on that would satisfy its placement policy
[grid@rac3 ~]$ srvctl status database -d dev
Instance dev1 is not running on node rac1
Instance dev2 is not running on node rac2
Instance dev3 is not running on node rac3
[grid@rac3 ~]$ Parameter file
[oracle@rac3 dbs]$ cat init_dev2.ora
dev3.__db_cache_size=272629760
dev2.__db_cache_size=272629760
dev1.__db_cache_size=281018368
dev3.__java_pool_size=4194304
dev2.__java_pool_size=4194304
dev1.__java_pool_size=4194304
dev3.__large_pool_size=4194304
dev2.__large_pool_size=4194304
dev1.__large_pool_size=4194304
dev1.__oracle_base='/raczone/11.2.0'#ORACLE_BASE set from environment
dev2.__oracle_base='/raczone/11.2.0'#ORACLE_BASE set from environment
dev3.__oracle_base='/raczone/11.2.0'#ORACLE_BASE set from environment
dev3.__pga_aggregate_target=343932928
dev2.__pga_aggregate_target=343932928
dev1.__pga_aggregate_target=343932928
dev3.__sga_target=507510784
dev2.__sga_target=507510784
dev1.__sga_target=507510784
dev3.__shared_io_pool_size=0
dev2.__shared_io_pool_size=0
dev1.__shared_io_pool_size=0
dev3.__shared_pool_size=218103808
dev2.__shared_pool_size=218103808
dev1.__shared_pool_size=209715200
dev3.__streams_pool_size=0
dev2.__streams_pool_size=0
dev1.__streams_pool_size=0
*.audit_file_dest='/raczone/11.2.0/admin/dev/adump'
*.audit_trail='db'
*.cluster_database=true
*.compatible='11.2.0.0.0'
*.control_files='+DATA1/dev/controlfile/current.260.786380999','+FRA/dev/controlfile/current.256.786380999'
*.db_block_size=8192
*.db_create_file_dest='+DATA1'
*.db_domain=''
*.db_name='dev'
*.db_recovery_file_dest='+FRA'
*.db_recovery_file_dest_size=4039114752
*.diagnostic_dest='/raczone/11.2.0'
*.dispatchers='(PROTOCOL=TCP) (SERVICE=devXDB)'
dev1.instance_number=1
dev2.instance_number=2
dev3.instance_number=3
*.log_archive_format='%t_%s_%r.dbf'
*.memory_target=848297984
*.open_cursors=300
*.processes=150
*.remote_listener='scan-cluster.raczone.com:1521'
*.remote_login_passwordfile='exclusive'
dev3.thread=3
dev1.thread=1
dev2.thread=1
dev3.undo_tablespace='UNDOTBS3'
dev2.undo_tablespace='UNDOTBS2'
dev1.undo_tablespace='UNDOTBS1'
[oracle@rac3 dbs]$

Similar Messages

  • Can't start EM after adding node to cluster

    Hi, I don't know if i choose the right forum. I have a problem with OEM after adding node to the cluster: It gives me an error:
    [oracle@nodedc3 bin]$ emctl start dbconsole
    Can't do setuid (cannot exec sperl)I think i can be a permissions issue like it was in my second thread. Thanks

    Hi, i have this package installed:
    [root@nodedc3 ~]# yum install perl-suidperl
    Loaded plugins: fastestmirror
    Loading mirror speeds from cached hostfile
    * base: centos.mirror.linuxwerk.com
    * extras: ftp.plusline.de
    * updates: mirror.optimate-server.de
    Setting up Install Process
    Package 4:perl-suidperl-5.8.8-40.el5_9.x86_64 already installed and latest version
    Nothing to doOEM on other nodes works perfectlly. Thanks

  • Not able to start the listener in oracle 10g  after the domain name changed

    Hi
    I had installed the oracle 10g on zLinux. It was working fine( was able to mount the database and start the listener). Now my server's domain name got changed. So i have added the new domain name in the tnsnames.ora and listeners.ora file . now i could able to mount the databases but am not able to start the listener . whille starting the listener , am getting the following error
    oracle@ptcr4d00:~> lsnrctl start
    LSNRCTL for Linux: Version 10.2.0.2.0 - Production on 05-AUG-2009 10:31:05
    Copyright (c) 1991, 2005, Oracle. All rights reserved.
    Starting /opt/oracle/10g/bin/tnslsnr: please wait...
    TNSLSNR for Linux: Version 10.2.0.2.0 - Production
    System parameter file is /opt/oracle/10g/network/admin/listener.ora
    Log messages written to /opt/oracle/10g/network/log/listener.log
    Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
    Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=PTCR4D00)(PORT=1521)))
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
    TNS-12547: TNS:lost contact
    TNS-12560: TNS:protocol adapter error
    TNS-00517: Lost contact
    Linux Error: 104: Connection reset by peer
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=PTCR4D00)(PORT=1521)))
    TNS-12541: TNS:no listener
    TNS-12560: TNS:protocol adapter error
    TNS-00511: No listener
    Linux Error: 111: Connection refused
    I have posted the contents of the tnsnames.ora and listeners.ora
    TNSNAMES.ORA
    TC =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = PTCR4D00)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = TC)
    EXTPROC_CONNECTION_DATA =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
    (CONNECT_DATA =
    (SID = PLSExtProc)
    (PRESENTATION = RO)
    LISTENERS.ORA
    SID_LIST_LISTENER =
    (SID_LIST =
    (SID_DESC =
    (SID_NAME = PLSExtProc)
    (ORACLE_HOME = /opt/oracle/10g)
    (PROGRAM = extproc)
    LISTENER =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
    (ADDRESS = (PROTOCOL = TCP)(HOST = PTCR4D00)(PORT = 1521))
    Could you please help me to resolve this issue ?
    Regards
    Mani

    Hi
    Please find the content of the /etc/hosts below
    # IP-Address Full-Qualified-Hostname Short-Hostname
    #127.0.0.1 localhost
    9.124.114.49 PTCR4D00
    # special IPv6 addresses
    ::1 localhost ipv6-localhost ipv6-loopback
    fe00::0 ipv6-localnet
    ff00::0 ipv6-mcastprefix
    ff02::1 ipv6-allnodes
    ff02::2 ipv6-allrouters
    ff02::3 ipv6-allhosts
    9.124.114.49 PTCR4D00 PTCR4D00
    Regards
    Mani

  • Not able to start OEM

    Hi,
    I have installed Orcle grid control10.2.0.1 on node 1.Its a 11gr2 rac database.
    But i am not able to start OEM.
    [oracle@rac1 bin]$ ./opmnctl status
    Processes in Instance: EnterpriseManager0.rac1.raczone.com
    -------------------+--------------------+---------+---------
    ias-component      | process-type       |     pid | status 
    -------------------+--------------------+---------+---------
    DSA                | DSA                |       0 | NONE   
    HTTP_Server        | HTTP_Server        |    8176 | Init   
    LogLoader          | logloaderd         |       0 | NONE   
    dcm-daemon         | dcm-daemon         |       0 | NONE   
    OC4J               | home               |    8168 | Init   
    WebCache           | WebCache           |    8191 | Alive  
    WebCache           | WebCacheAdmin      |     N/A | Down   
    [oracle@rac1 bin]$ ./opmnctl startproc ias-component=OC4J
    opmnctl: starting opmn managed processes...
    ================================================================================
    opmn id=rac1.raczone.com:6202
        no processes matched this request
    [oracle@rac1 bin]$ ./opmnctl startproc ias-component=DSA
    opmnctl: starting opmn managed processes...
    ================================================================================
    opmn id=rac1.raczone.com:6202
        no processes matched this request
    [oracle@rac1 bin]$ ./opmnctl startproc ias-component=HTTP_Server
    opmnctl: starting opmn managed processes...
    ================================================================================
    opmn id=rac1.raczone.com:6202
        no processes matched this request
    [oracle@rac1 bin]$ ./opmnctl status
    Processes in Instance: EnterpriseManager0.rac1.raczone.com
    -------------------+--------------------+---------+---------
    ias-component      | process-type       |     pid | status 
    -------------------+--------------------+---------+---------
    DSA                | DSA                |       0 | NONE   
    HTTP_Server        | HTTP_Server        |    8176 | Alive  
    LogLoader          | logloaderd         |       0 | NONE   
    dcm-daemon         | dcm-daemon         |       0 | NONE   
    OC4J               | home               |       0 | NONE   
    WebCache           | WebCache           |    8191 | Alive  
    WebCache           | WebCacheAdmin      |     N/A | Down   
    [oracle@rac1 bin]$ opmnctl startproc process-type=OC4J_EMPROV
    -bash: opmnctl: command not found
    [oracle@rac1 bin]$ ./opmnctl startproc process-type=OC4J_EMPROV
    opmnctl: starting opmn managed processes...
    ================================================================================
    opmn id=rac1.raczone.com:6202
        no enabled components for this request
    [oracle@rac1 bin]$ ./opmnctl startproc process-type=DSA
    opmnctl: starting opmn managed processes...
    ================================================================================
    opmn id=rac1.raczone.com:6202
        no enabled components for this request
    [oracle@rac1 bin]$ ./opmnctl status
    Processes in Instance: EnterpriseManager0.rac1.raczone.com
    -------------------+--------------------+---------+---------
    ias-component      | process-type       |     pid | status 
    -------------------+--------------------+---------+---------
    DSA                | DSA                |       0 | NONE   
    HTTP_Server        | HTTP_Server        |    8176 | Alive  
    LogLoader          | logloaderd         |       0 | NONE   
    dcm-daemon         | dcm-daemon         |       0 | NONE   
    OC4J               | home               |       0 | NONE   
    WebCache           | WebCache           |    8191 | Alive  
    WebCache           | WebCacheAdmin      |     N/A | Down   
    [oracle@rac1 bin]$ ./opmnctl stopall
    opmnctl: stopping opmn and all managed processes...
    [oracle@rac1 bin]$ ./opmnctl startall
    opmnctl: starting opmn and all managed processes...
    ================================================================================
    opmn id=rac1.raczone.com:6202
        3 of 4 processes started.
    ias-instance id=EnterpriseManager0.rac1.raczone.com
    ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    ias-component/process-type/process-set:
        OC4J/home/default_island
    Error
    --> Process (pid=9016)
        failed to start a managed process after the maximum retry limit
        Log:
        /raczone/oem/OracleHomes/oms10g/opmn/logs/OC4J~home~default_island~1
    [oracle@rac1 bin]$ ./opmnctl status
    Processes in Instance: EnterpriseManager0.rac1.raczone.com
    -------------------+--------------------+---------+---------
    ias-component      | process-type       |     pid | status 
    -------------------+--------------------+---------+---------
    DSA                | DSA                |     N/A | Down   
    HTTP_Server        | HTTP_Server        |    8936 | Alive  
    LogLoader          | logloaderd         |     N/A | Down   
    dcm-daemon         | dcm-daemon         |     N/A | Down   
    OC4J               | home               |     N/A | Down   
    WebCache           | WebCache           |    8963 | Alive  
    WebCache           | WebCacheAdmin      |    8945 | Alive  
    [oracle@rac1 bin]$ ./opmnctl startproc process-type=DSA
    opmnctl: starting opmn managed processes...
    ================================================================================
    opmn id=rac1.raczone.com:6202
        no enabled components for this request
    [oracle@rac1 bin]$ ./opmnctl status
    Processes in Instance: EnterpriseManager0.rac1.raczone.com
    -------------------+--------------------+---------+---------
    ias-component      | process-type       |     pid | status 
    -------------------+--------------------+---------+---------
    DSA                | DSA                |     N/A | Down   
    HTTP_Server        | HTTP_Server        |    8936 | Alive  
    LogLoader          | logloaderd         |     N/A | Down   
    dcm-daemon         | dcm-daemon         |     N/A | Down   
    OC4J               | home               |     N/A | Down   
    WebCache           | WebCache           |    8963 | Alive  
    WebCache           | WebCacheAdmin      |    8945 | Alive  
    [oracle@rac1 bin]$ cd ../
    [oracle@rac1 opmn]$ cd ../../agent10g/bin/
    [oracle@rac1 bin]$ ls -lrt emctl
    -rwxr--r-- 1 oracle oinstall 11777 Jun 19 20:59 emctl
    [oracle@rac1 bin]$ ./emctl status agent
    Oracle Enterprise Manager 10g Release 10.2.0.1.0. 
    Copyright (c) 1996, 2005 Oracle Corporation.  All rights reserved.
    Malformed URL: http://rac1.raczone.com:%EM_SERVLET_PORT%/emd/main/
    Error connecting to http://rac1.raczone.com:%EM_SERVLET_PORT%/emd/main/
    [oracle@rac1 bin]$

    Its a fresh installation
    nothing is logged in opms.log file
    [oracle@rac1 logs]$ ls -lrt
    total 196
    -rw------- 1 oracle oinstall     0 Jun 19 20:48 opmn.log
    -rw-r--r-- 1 root   root        90 Jun 25 17:06 DSA~1
    -rw-r--r-- 1 root   root        76 Jun 25 17:06 LogLoader~logloaderd~1
    -rw-r--r-- 1 root   root        51 Jun 25 17:06 dcm-daemon~dcm-daemon~dcm~1
    -rw------- 1 oracle oinstall  9043 Jul  4 12:26 ons.log
    -rw------- 1 oracle oinstall  3479 Jul  4 12:26 WebCache~WebCacheAdmin~1
    -rw------- 1 oracle oinstall  3400 Jul  4 12:26 WebCache~WebCache~1
    -rw------- 1 oracle oinstall 14009 Jul  4 12:26 HTTP_Server~1
    -rw------- 1 oracle oinstall 77612 Jul  4 12:26 OC4J~home~default_island~1
    drwx------ 2 oracle oinstall  4096 Jul  4 12:26 states
    -rw------- 1 oracle oinstall 57908 Jul  4 12:26 ipm.log
    [oracle@rac1 logs]$

  • Not able to start the NW04 CI instance.

    Hi All,
       I installed NW04 JAVA with EP 6.0 on Windows 2003 SP1 with MS SQL. I configured SCS and CI to run on Virtual hosts SAPENQ01 and SAPJ2EE respectively for HA. I have two node cluster. When I start CI and SCS on same host they started just fine and everything is working. I switched the SCS instance group to second node and tried to start the CI instnce on first node. The CI is not able to start.
        I tried starting CI manually also ... bust it just gives message on command line saying "STARTSAP continues ... ". No logs are created. It never starts jcontrol.exe process. And also when I see SAP MMC ... it is not showing SAP instances there.
    Any help is greatly appreciated.
    TIA,
    cvr/

    Hi,
    Did you adjust the profile files of the Web AS so that they use the virtual host names (wherever host names are used), not the real host names. For example, if the host name of the message server in the profile is the real hostname of the machine, after the switchover connection to message server would not be possible.
    In addition, you would also have to check the DB connection settings (through the config tool) and make sure the virtual hostnames are used there too.
    Hope that helps.
    P.S. the logs of the startsap are generated in the \usr\sap\<SID>\SCS<nr>\work\sapstart.log.

  • Not able to start PIA

    hi gurus, i am not able to start my PIA. i am able to boot the app server successfully but i think there is some issue with the webserver. this is the URL of my PIA http://DELL-PC:80/psp/CPDMO/?cmd=login
    when i am trying to open the link to check websever (http://DELL-PC), it does not work. plus i am also not sure whether the port number 80 is correct. would you please also suggest me where all i can get this port number to verify?
    the below is the cmd text of webserver boot -
    Attempting to start WebLogic Server 'PIA'
    starting weblogic with Java version:
    java version "1.6.0_05"
    Java(TM) SE Runtime Environment (build 1.6.0_05-b13)
    BEA JRockit(R) (build R27.6.2-20_o-108500-1.6.0_05-20090120-1116-windows-ia32, compiled mode)
    java -jrockit -XnoOpt -XXnoJITInline -Xms512m -Xmx512m -Dtoplink.xml.platform=oracle.toplink.platform.xml.jaxp.JAXPPlatform -Djava.util
    .logging.config.file=D:\CPDMO_~1\webserv\CPDMO\applications\peoplesoft\logging.properties -Dorg.apache.commons.logging.Log=org.apache.c
    ommons.logging.impl.Jdk14Logger -Dweblogic.Name=PIA -Dps_vault=D:\CPDMO_~1\webserv\CPDMO\psvault -Djavax.net.ssl.trustStore=D:/CPDMO_P
    SHOME\webserv\CPDMO\keystore\pskey -Dweblogic.ProductionModeEnabled=true -Djava.security.policy=D:\WEBLOG~1\WLSERV~1.3\server\lib\weblo
    gic.policy -Dssl.debug=false -Dps_home=D:/CPDMO_PSHOME weblogic.Server
    <Jul 30, 2012 12:49:32 PM IST> <Notice> <WebLogicServer> <BEA-000395> <Following extensions directory contents added to the end of the
    classpath:
    D:\CPDMO_PSHOME\webserv\CPDMO\lib\pluto-1.0.1.jar;D:\CPDMO_PSHOME\webserv\CPDMO\lib\portlet-api-1.0.jar;D:\CPDMO_PSHOME\webserv\CPDMO\l
    ib\ps_patch.jar>
    <Jul 30, 2012 12:49:35 PM IST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with BEA JRockit(R) Version R27.6.2-20_o-
    108500-1.6.0_05-20090120-1116-windows-ia32 from BEA Systems, Inc.>
    <Jul 30, 2012 12:49:36 PM IST> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.1.0 Thu Jun 11 00:26:56 EDT 2009 122738
    5 >
    <Jul 30, 2012 12:49:36 PM IST> <Warning> <Management> <BEA-141274> <Production mode has specified at the command line via the weblogic.
    ProductionModeEnabled system property. This system property overrides the development mode setting contained in config.xml. However, th
    e console and WLST show the attribute values and defaults that correspond to the development mode specified in config.xml.>
    <Jul 30, 2012 12:49:38 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
    <Jul 30, 2012 12:49:38 PM IST> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
    <Jul 30, 2012 12:49:39 PM IST> <Notice> <Log Management> <BEA-170019> <The server log file D:\CPDMO_PSHOME\webserv\CPDMO\servers\PIA\lo
    gs\PIA_weblogic.log is opened. All server side log events will be written to this file.>
    <Jul 30, 2012 12:49:45 PM IST> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
    <Jul 30, 2012 12:49:53 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
    <Jul 30, 2012 12:49:53 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
    <Jul 30, 2012 12:50:28 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
    <Jul 30, 2012 12:50:30 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
    <Jul 30, 2012 12:50:31 PM IST> <Notice> <Security> <BEA-090171> <Loading the identity certificate and private key stored under the alia
    s DemoIdentity from the jks keystore file D:\WEBLOG~1\WLSERV~1.3\server\lib\DemoIdentity.jks.>
    <Jul 30, 2012 12:50:31 PM IST> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file D:\WEBLOG~1\WL
    SERV~1.3\server\lib\DemoTrust.jks.>
    <Jul 30, 2012 12:50:31 PM IST> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file D:\WEBLOG~1\JR
    OCKI~1.2-2\jre\lib\security\cacerts.>
    <Jul 30, 2012 12:50:31 PM IST> <Alert> <Security> <BEA-090152> <Demo trusted CA certificate is being used in production mode: [
    Version: V3
    Subject: CN=CACERT, OU=FOR TESTING ONLY, O=MyOrganization, L=MyTown, ST=MyState, C=US
    Signature Algorithm: MD5withRSA, OID = 1.2.840.113549.1.1.4
    Key: Sun RSA public key, 512 bits
    modulus: 9550192877869244258838480703390456015046425375252278279190673063544122510925482179963329236052146047356415957587628011282484
    772458983977898996276815440753
    public exponent: 65537
    Validity: [From: Fri Mar 22 01:42:27 IST 2002,
                   To: Wed Mar 23 01:42:27 IST 2022]
    Issuer: CN=CACERT, OU=FOR TESTING ONLY, O=MyOrganization, L=MyTown, ST=MyState, C=US
    SerialNumber: [    33f10648 fcde0deb 4199921f d64537f4]
    Certificate Extensions: 1
    [1]: ObjectId: 2.5.29.15 Criticality=true
    KeyUsage [
    Key_CertSign
    Algorithm: [MD5withRSA]
    Signature:
    0000: 9D 26 4C 29 C8 91 C3 A7 06 C3 24 6F AE B4 F8 82 .&L)......$o....
    0010: 80 4D AA CB 7C 79 46 84 81 C4 66 95 F4 1E D8 C4 .M...yF...f.....
    0020: E9 B7 D9 7C E2 23 33 A4 B7 21 E0 AA 54 2B 4A FF .....#3..!..T+J.
    0030: CB 21 20 88 81 21 DB AC 90 54 D8 7D 79 63 23 3C .! ..!...T..yc#<
    ] The system is vulnerable to security attacks, since it trusts certificates signed by the demo trusted CA.>
    <Jul 30, 2012 12:50:31 PM IST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[3]" is now listening on fe80:0:0:0:9089:6007:aac:
    55bb:443 for protocols iiops, t3s, ldaps, https.>
    <Jul 30, 2012 12:50:31 PM IST> <Notice> <Server> <BEA-002613> <Channel "Default[4]" is now listening on fe80:0:0:0:286d:3e9e:f19d:7779:
    8010 for protocols iiop, t3, ldap, snmp, http.>
    <Jul 30, 2012 12:50:31 PM IST> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 2001:0:9d38:953c:286d:3e9e:f19d:77
    79:8010 for protocols iiop, t3, ldap, snmp, http.>
    <Jul 30, 2012 12:50:31 PM IST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[4]" is now listening on fe80:0:0:0:286d:3e9e:f19d
    :7779:443 for protocols iiops, t3s, ldaps, https.>
    <Jul 30, 2012 12:50:31 PM IST> <Warning> <Server> <BEA-002611> <Hostname "DELL-PC", maps to multiple IP addresses: 14.98.136.134, fe80:
    0:0:0:286d:3e9e:f19d:7779%15, 2002:e62:8886:0:0:0:e62:8886, 2001:0:9d38:953c:286d:3e9e:f19d:7779>
    <Jul 30, 2012 12:50:31 PM IST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[7]" is now listening on 0:0:0:0:0:0:0:1:443 for p
    rotocols iiops, t3s, ldaps, https.>
    <Jul 30, 2012 12:50:31 PM IST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[8]" is now listening on 127.0.0.1:443 for protoco
    ls iiops, t3s, ldaps, https.>
    <Jul 30, 2012 12:50:31 PM IST> <Notice> <Server> <BEA-002613> <Channel "Default[6]" is now listening on fe80:0:0:0:7028:bf6f:a932:b82:8
    010 for protocols iiop, t3, ldap, snmp, http.>
    <Jul 30, 2012 12:50:31 PM IST> <Notice> <Server> <BEA-002613> <Channel "Default[7]" is now listening on 0:0:0:0:0:0:0:1:8010 for protoc
    ols iiop, t3, ldap, snmp, http.>
    <Jul 30, 2012 12:50:31 PM IST> <Notice> <Server> <BEA-002613> <Channel "Default[8]" is now listening on 127.0.0.1:8010 for protocols ii
    op, t3, ldap, snmp, http.>
    <Jul 30, 2012 12:50:31 PM IST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[1]" is now listening on 2002:e62:8886:0:0:0:e62:8
    886:443 for protocols iiops, t3s, ldaps, https.>
    <Jul 30, 2012 12:50:31 PM IST> <Notice> <Server> <BEA-002613> <Channel "Default[2]" is now listening on 14.98.136.134:8010 for protocol
    s iiop, t3, ldap, snmp, http.>
    <Jul 30, 2012 12:50:31 PM IST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[5]" is now listening on fe80:0:0:0:200:5efe:e62:8
    886:443 for protocols iiops, t3s, ldaps, https.>
    <Jul 30, 2012 12:50:31 PM IST> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on 2002:e62:8886:0:0:0:e62:8886:80
    10 for protocols iiop, t3, ldap, snmp, http.>
    <Jul 30, 2012 12:50:31 PM IST> <Notice> <Server> <BEA-002613> <Channel "Default[5]" is now listening on fe80:0:0:0:200:5efe:e62:8886:80
    10 for protocols iiop, t3, ldap, snmp, http.>
    <Jul 30, 2012 12:50:31 PM IST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[2]" is now listening on 14.98.136.134:443 for pro
    tocols iiops, t3s, ldaps, https.>
    <Jul 30, 2012 12:50:31 PM IST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure" is now listening on 2001:0:9d38:953c:286d:3e9e:f
    19d:7779:443 for protocols iiops, t3s, ldaps, https.>
    <Jul 30, 2012 12:50:31 PM IST> <Notice> <Server> <BEA-002613> <Channel "Default[3]" is now listening on fe80:0:0:0:9089:6007:aac:55bb:8
    010 for protocols iiop, t3, ldap, snmp, http.>
    <Jul 30, 2012 12:50:31 PM IST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[6]" is now listening on fe80:0:0:0:7028:bf6f:a932
    :b82:443 for protocols iiops, t3s, ldaps, https.>
    <Jul 30, 2012 12:50:31 PM IST> <Notice> <WebLogicServer> <BEA-000329> <Started WebLogic Admin Server "PIA" for domain "CPDMO" running i
    n Production Mode>
    <Jul 30, 2012 12:50:31 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
    <Jul 30, 2012 12:50:31 PM IST> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
    <Jul 30, 2012 12:50:33 PM IST> <Warning> <Log Management> <BEA-170011> <The LogBroadcaster on this server failed to broadcast log messa
    ges to the admin server. The Admin server may not be running. Message broadcasts to the admin server will be disabled.>
    Edited by: hick on Jul 30, 2012 12:59 PM

    looks like your configured pia to run on port 8010
    >
    <Jul 30, 2012 12:50:31 PM IST> <Notice> <Server> <BEA-002613> <Channel "Default[8]" is now listening on 127.0.0.1:8010 for protocols ii
    op, t3, ldap, snmp, http.>
    >
    Try following url:
    http://DELL-PC:8010/psp/CPDMO/?cmd=login

  • Not able to Start Hyperion EPM Architect services

    Hi,
    I have been facing issues with accessing FDM web application. The Error Desc is " An exception occured during the execution of the current web request. Please contact the administrator to review the stac trace in the event log for more information about the error."
    So we have tried to stop/restarted the Hyperion Services in Prod FDM server. But we are not able to start the below services after the stopping the services.
    Hyperion EPM Architect - Web Application
    Hyperion EPM Architect - Process Manager
    Hyperion EPM Architect - Job Manager
    Hyperion EPM Architect - Event Manager
    Hyperion EPM Architect - Engine Manager
    Hyperion EPM Architect - .Net JNI Bridge
    Also, we have rebooted the server. But these services are not up after the reboot. Please could you help to resolve this issue.
    Thanks,
    Aravindh K

    Thanks John. I got help from Oracle Support team to resolve the issue. This is a Common issue with the 11.1.1.3 version, the services take some time and Sometime start once before the other hence the issue. The issue is resolved after restarting the services manually in order.

  • Not able to start a VM

    Hello,
    one of my VM was working fine, then i copied the entire VM from one OVM server to another. Now I am not able to start that VM.
    # xm create vm.cfg
    Using config file "./vm.cfg".
    Started domain OEL5u2 (id=25)
    It does give me the vm ID but it is not listed under "xm list"
    # xm list
    Name ID Mem VCPUs State Time(s)
    Domain-0 0 952 8 r----- 14808.1
    again i have to do xm create ..and the story repeats...
    I looked into logs and i see following:
    [2010-02-04 22:47:52 23777] INFO (XendDomain:1180) Domain OEL5u2 (25) unpaused.
    [2010-02-04 22:47:57 23777] WARNING (XendDomainInfo:1898) Domain has crashed: name=OEL5u2 id=25.
    [2010-02-04 22:47:57 23777] ERROR (XendDomainInfo:2032) VM OEL5u2 restarting too fast (Elapsed time: 4.960329 seconds). Refusing to restart to avoid loops.
    [2010-02-04 22:47:57 23777] DEBUG (XendDomainInfo:2748) XendDomainInfo.destroy: domid=25
    [2010-02-04 22:47:58 23777] DEBUG (XendDomainInfo:2221) Destroying device model
    [2010-02-04 22:47:58 23777] INFO (image:553) OEL5u2 device model terminated
    what's up with " restarting too fast" and how to avoid that ??
    -thnx

    here is the problem....
    My VM is still fine...I moved it back to the old host and it started working again..
    moved it back to the new host and it crashed again..
    it turned out to be that this new host had 72 GB of memory...hence the VM was crashing.
    I made the OVM server to see only 64 GB of memory and then I was able to start the VM on new host as well..
    then did some googling and came across this Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=448115
    Now I need to check whether i am upto the latest patch vesion for Oracle VM
    # cat /etc//redhat-release
    Oracle VM server release 2.2.0
    # uname -a
    Linux test_ovm 2.6.18-128.2.1.4.9.el5xen #1 SMP Fri Oct 9 14:57:31 EDT 2009 i686 i686 i386 GNU/Linux
    checking for any patches released after Oracle VM 2.2.0
    thnx
    Edited by: Dheeraj.Kabra on Feb 5, 2010 5:11 AM

  • Not able to start localagent

    Hi All,
    I am working on ODI 11g (11.1.1.5), and have created master and work repostiories on my laptop successfully.
    After follwoing instruction to update odiparam file with the password created using encode cammand, and specifying all the other paramaeters appropriately as per the instcutions to install the localagent, when I execute follwoing command from command promt;
    agent -NAME=localagent
    I get follwoing errors and hence the localagent could not be started;
    Pasting part of the error log thrown after the above command was executed;
    C:\oracle\product\11.1.1\Oracle_ODI_1\oracledi\agent\bin>agent -NAME=localagent
    OracleDI: Starting Agent ...
    2012-03-26 15:15:00.281 ERROR ODI-1131 Agent localagent encountered an error: OD
    I-1400: Agent localagent start failure: JDBC connection error occurs while conne
    cting to the master repository. Caused by: ODI-1441: Unable to connect to the ma
    ster repository at JBDC URL=jdbc:oracle:thin:@localhost:1521:orcl with USER=snpm
    1.
    ODI-1441: Unable to connect to the master repository at JBDC URL=jdbc:oracle:thi
    n:@localhost:1521:orcl with USER=snpm1.
    Caused By: java.sql.SQLException: Exception occurred while getting connection: o
    racle.ucp.UniversalConnectionPoolException: Cannot get Connection from Datasourc
    e: java.sql.SQLException: ORA-01017: invalid username/password; logon denied
    at oracle.ucp.util.UCPErrorHandler.newSQLException(UCPErrorHandler.java:
    488)
    at oracle.ucp.util.UCPErrorHandler.throwSQLException(UCPErrorHandler.jav
    a:163)
    at oracle.ucp.jdbc.PoolDataSourceImpl.getConnection(PoolDataSourceImpl.j
    ava:911)
    at oracle.ucp.jdbc.PoolDataSourceImpl.getConnection(PoolDataSourceImpl.j
    ava:857)
    at oracle.ucp.jdbc.PoolDataSourceImpl.getConnection(PoolDataSourceImpl.j
    ava:851)
    at oracle.odi.Agent.validateConnectionProperties(Agent.java:411)
    at oracle.odi.Agent.doGetDataSource(Agent.java:403)
    at oracle.odi.Agent.main(Agent.java:484)
    Caused by: oracle.ucp.UniversalConnectionPoolException: Cannot get Connection fr
    om Datasource: java.sql.SQLException: ORA-01017: invalid username/password; logo
    n denied
    Please let me know what is the issue, as I am following all the instrcutuions and still not able to start the agent.
    Below is the environment of my laptop
    OS - Windows XP processional edition
    oracle 11g
    ODI 11g
    Would appreciate help to resolve this error, since I am not able to go ahead and create projects, scenarios, ... and so on...
    Thanks in advance.
    Santosh

    set ODI_MASTER_DRIVER=oracle.jdbc.OracleDriver
    set ODI_MASTER_URL=jdbc:oracle:thin:@localhost:1521:orcl
    set ODI_MASTER_USER=snpm1
    set ODI_MASTER_ENCODED_PASS=hpfXp4IuUHo28R1kj4qXVbGhS
    set ODI_SECU_WORK_REP=WORKREP_PR2-1
    set ODI_JAVA_HOME=C:\oracle\product\11.1.1\Oracle_ODI_1\jrockit-jdk1.6.0_24
    Above parameters I changed.
    snpm1 is a oracle schame for master repository
    'hpfXp4IuUHo28R1kj4qXVbGhS' is a string created by 'encode oracle1' command executed at command prompt
    WORKREP_PR2-1 is work repository name
    C:\oracle\product\11.1.1\Oracle_ODI_1\jrockit-jdk1.6.0_24 is path for java home as per my local odi installation..
    I am able to connect to snpm1 schema in oracle, so why is the local agent getting issue, is there any problem withe the driver specified?
    When I tried to connect localagent whcih I defined in physical architecture, by pressing Test Connection buttion, it gave following error.
    oracle.odi.runtime.agent.invocation.InvocationException: ODI-1424: Agent host or port cannot be reached using http://localhost:20910/oraclediagent.
         at oracle.odi.runtime.agent.invocation.RemoteRuntimeAgentInvoker.reThrowAgentErrorAsInvocation(RemoteRuntimeAgentInvoker.java:1064)
         at oracle.odi.runtime.agent.invocation.RemoteRuntimeAgentInvoker.invoke(RemoteRuntimeAgentInvoker.java:272)
         at oracle.odi.runtime.agent.invocation.RemoteRuntimeAgentInvoker.invokeIsAlive(RemoteRuntimeAgentInvoker.java:409)
         at oracle.odi.ui.action.SnpsPopupActionTestAgentHandler.actionPerformed(SnpsPopupActionTestAgentHandler.java:67)
         at com.sunopsis.graphical.frame.edit.EditFrameSnpAgent.jButtonTestAgent_ActionPerformed(EditFrameSnpAgent.java:990)
    Thanks and Regards
    Santosh
    Edited by: 910192 on Mar 26, 2012 4:22 AM
    Edited by: 910192 on Mar 26, 2012 4:24 AM

  • Not able to Start the oracle db error "ORA-01031: insufficient privileges"

    Hi experts,
    I have oracle 11g setup on so solaris. i changed the db_cache_size
    & processes values and stopped the DB services after that i am not able to start the oracle DB. Listener is running.
    when i start the db server its giving the below error(startup.log)
    ./dbstart: Starting up database "orcl"
    Mon Sep 27 04:31:08 MDT 2010
    SQL*Plus: Release 11.1.0.7.0 - Production on Mon Sep 27 04:31:08 2010
    Copyright (c) 1982, 2008, Oracle. All rights reserved.
    SQL> ERROR:
    ORA-01031: insufficient privileges
    SQL> ORA-01031: insufficient privileges
    SQL>
    ./dbstart: Database instance "orcl" warm started.
    Please help me to ressolve this issue.
    Thanks
    Krishna

    yes, password file is there in /etc/passwd
    here are the contents:
    root:x:0:0:Super-User:/:/sbin/sh
    lroot:x:0:0:Super-User:/:/sbin/sh
    daemon:x:1:1::/:
    bin:x:2:2::/usr/bin:/bin/false
    sys:x:3:3::/:
    adm:x:4:4:Admin:/var/adm:/bin/false
    lp:x:71:8:Line Printer Admin:/usr/spool/lp:/bin/false
    uucp:x:5:5:uucp Admin:/usr/lib/uucp:/bin/false
    nuucp:x:9:9:uucp Admin:/var/spool/uucppublic:/usr/lib/uucp/uucico
    listen:x:37:4:Network Admin:/usr/net/nls:/bin/false
    nobody:x:60001:60001:Nobody:/:/bin/false
    noaccess:x:60002:60002:No Access User:/:/bin/false
    nobody4:x:65534:65534:SunOS 4.x Nobody:/:/bin/false
    itunix:x:50000:14:IT Unix Account:/export/home/itunix:/bin/csh
    hharika:x:765:38:Harpal Harika:/export/home/hharika:/bin/csh
    prsingh:x:795:38:Pradeep Singh:/export/home/prsingh:/bin/csh
    mmir:x:1229:21:Mir Monis Ali:/export/home/mmir:/bin/csh
    bogunnai:x:1207:21:Bose Ogunnaike:/export/home/bogunnai:/bin/ksh
    mpokala:x:2117:21:Mahesh Pokala:/export/home/mpokala:/bin/ksh
    apopov:x:2385:38:Anton Popov:/export/home/apopov:/bin/csh
    kkeith:x:2629:227:Kevin Keith:/home/kkeith:/usr/bin/ksh
    sshd:x:22:22:SSH Privsep:/var/empty:/bin/false
    patrol:x:2784:10:Patrol User:/opt/bmc:/usr/bin/ksh
    smmsp:x:25:25:Sendmail Submission user:/none:/bin/false
    ldap:x:50001:1002::/export/home/ldap:/bin/sh
    perfuser:x:884:268::/export/home/perfuser:/bin/csh
    webservd:x:80:80::/home/webservd:/bin/pfsh
    oracle:x:156:40:Oracle Software Owner:/export/home/oracle:/bin/bash
    perfuser_idc:x:64383:1::/home/perfuser_idc:/bin/sh
    idc_perf:x:64384:292::/home/idc_perf:/bin/sh

  • NOt able to start the listener..

    After Indtalling oracle 11g .. i am not able to start the listener
    dbstart $ORACLE_HOME
    lsnrctl start
    ORACLE_SID=orcl
    export ORACLE_SID
    lsnrctl start
    [oracle@test1 bin]$ lsnrctl start
    LSNRCTL for Linux: Version 11.1.0.6.0 - Production on 27-DEC-2012 15:35:36
    Copyright (c) 1991, 2007, Oracle. All rights reserved.
    Starting /u01/app/oracle/product/11.1.0/db_1/bin/tnslsnr: please wait...
    TNSLSNR for Linux: Version 11.1.0.6.0 - Production
    System parameter file is /u01/app/oracle/product/11.1.0/db_1/network/admin/listener.ora
    Log messages written to /u01/app/oracle/diag/tnslsnr/test1/listener/alert/log.xml
    Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1521)))
    Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=test1.com)(PORT=1521)))
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for Linux: Version 11.1.0.6.0 - Production
    Start Date 27-DEC-2012 15:35:37
    Uptime 0 days 0 hr. 0 min. 0 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Listener Parameter File /u01/app/oracle/product/11.1.0/db_1/network/admin/listener.ora
    Listener Log File /u01/app/oracle/diag/tnslsnr/test1/listener/alert/log.xml
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1521)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=test1.com)(PORT=1521)))
    **The listener supports no services**The command completed successfully
    tried all posibalaties as here
    Oracle 11g Listener Supports No services
    Please help me beacuse of which my work is struck for whole day

    [oracle@test1 bin]$ ps -ef|grep tns
    oracle 13498 11176 0 16:41 pts/5 00:00:00 grep tns
    [oracle@test1 bin]$
    [oracle@test1 bin]$ lsnrctl start
    LSNRCTL for Linux: Version 11.1.0.6.0 - Production on 27-DEC-2012 16:41:08
    Copyright (c) 1991, 2007, Oracle. All rights reserved.
    Starting /u01/app/oracle/product/11.1.0/db_1/bin/tnslsnr: please wait...
    TNSLSNR for Linux: Version 11.1.0.6.0 - Production
    System parameter file is /u01/app/oracle/product/11.1.0/db_1/network/admin/listener.ora
    Log messages written to /u01/app/oracle/diag/tnslsnr/test1/listener/alert/log.xml
    Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1521)))
    Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=test1.com)(PORT=1521)))
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for Linux: Version 11.1.0.6.0 - Production
    Start Date 27-DEC-2012 16:41:10
    Uptime 0 days 0 hr. 0 min. 0 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Listener Parameter File /u01/app/oracle/product/11.1.0/db_1/network/admin/listener.ora
    Listener Log File /u01/app/oracle/diag/tnslsnr/test1/listener/alert/log.xml
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1521)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=test1.com)(PORT=1521)))
    The listener supports no services+The command completed successfully
    [oracle@test1 bin]$
    [oracle@test1 bin]$ echo $ORACLE_SID
    orcl
    [oracle@test1 bin]$ echo $ORACLE_HOME
    /u01/app/oracle/product/11.1.0/db_1
    [oracle@test1 bin]$
    [oracle@test1 bin]$

  • Not able to start JAVA Central Instance

    Hello All,
                      After doing JAVA Support Pack through JSPM I am not able to start the JAVA Central Instance of Solman.
    Pasting the disp+work error.
    Tue Nov 10 09:17:54 2009
    J2EE server info
      start = TRUE
      state = STARTED
      pid = 6020
      argv[0] = G:\usr\sap\DSM\DVEBMGS01\exe\jcontrol.EXE
      argv[1] = G:\usr\sap\DSM\DVEBMGS01\exe\jcontrol.EXE
      argv[2] = pf=G:\usr\sap\DSM\SYS\profile\DSM_DVEBMGS01_GOLITSAPD36
      argv[3] = -DSAPSTART=1
      argv[4] = -DCONNECT_PORT=64990
      argv[5] = -DSAPSYSTEM=01
      argv[6] = -DSAPSYSTEMNAME=DSM
      argv[7] = -DSAPMYNAME=GOLITSAPD36_DSM_01
      argv[8] = -DSAPPROFILE=G:\usr\sap\DSM\SYS\profile\DSM_DVEBMGS01_GOLITSAPD36
      argv[9] = -DFRFC_FALLBACK=ON
      argv[10] = -DFRFC_FALLBACK_HOST=localhost
      start_lazy = 0
      start_control = SAP J2EE startup framework
    DpJ2eeStart: j2ee state = STARTED
    DpJ2eeLogin: j2ee state = CONNECTED
    Tue Nov 10 09:18:03 2009
    ***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
    ERROR => NiIRead: SiRecv failed for hdl 6 / sock 1320
        (SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:1714) [nixxi.cpp    4424]
    DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
    DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=6020)
    ERROR => DpProcKill: kill failed [dpntdisp.c   371]
    DpIJ2eeShutdown: j2ee state = SHUTDOWN
    Tue Nov 10 09:18:14 2009
    DpEnvCheckJ2ee: switch off j2ee start flag.
    Please suggest me.

    Hello Juan,
                        Pasting you the logs:
    dev_w0 :
    Tue Nov 10 20:41:04 2009
    A  GENER starting remote generation: BBP_ALERT_SB_NOTTRANSFERED (requested by W12).
    A  GENER starting remote generation: SAPLSI00 (requested by W12).
    A  GENER starting remote generation: SAPLBBP_PD_SC (requested by W12).

    A Tue Nov 10 20:41:10 2009
    A  GENER starting remote generation: SAPLBBP_PD (requested by W12).

    A Tue Nov 10 20:41:14 2009
    A  GENER starting remote generation: SAPLBBP_MS_C (requested by W12).
    A  GENER starting remote generation: SAPLBBP_PDH (requested by W12).

    A Tue Nov 10 20:41:17 2009
    A  GENER starting remote generation: SAPLCRM_ORDER_CB (requested by W12).

    M Tue Nov 10 21:16:04 2009
    M  *** ERROR => SosIAnchorArrayCreatable: T17/M0 in state cancel [thxxtool2.c  947]
    M  *** ERROR => SosIAnchorArrayCreatable: T17/M0 in state cancel [thxxtool2.c  947]
    M  *** ERROR => SosIAnchorArrayCreatable: T17/M0 in state cancel [thxxtool2.c  947]
    M  *** ERROR => SosIAnchorArrayCreatable: T17/M0 in state cancel [thxxtool2.c  947]

    M Tue Nov 10 21:16:05 2009
    M  *** ERROR => SosIAnchorArrayCreatable: T17/M0 in state cancel [thxxtool2.c  947]

    M Tue Nov 10 21:41:09 2009
    M  *** ERROR => SosIAnchorArrayCreatable: T17/M0 in state cancel [thxxtool2.c  947]
    M  *** ERROR => SosIAnchorArrayCreatable: T17/M0 in state cancel [thxxtool2.c  947]

    M Tue Nov 10 22:41:10 2009
    M  *** ERROR => SosIAnchorArrayCreatable: T17/M0 in state cancel [thxxtool2.c  947]
    std_server0.out :
    Nov 10, 2009 6:49:36 AM                            /System/Server [SAPEngine_Application_Thread[impl:3]_32] Group: EJBQL-SQL-Mapper: com.sap.sql.ejb.SQLMapper = com.sap.sql.ejb.common.CommonSQLMapper
    Nov 10, 2009 6:49:36 AM                            /System/Server [SAPEngine_Application_Thread[impl:3]_32] Group: EJBQL-SQL-Mapper: com.sap.sql.ejb.OpenSQLVerification = semantics
    Nov 10, 2009 6:49:36 AM                            /System/Server [SAPEngine_Application_Thread[impl:3]_32] Group: EJBQL-SQL-Mapper: com.sap.sql.ejb.SQLChecker = com.sap.sql.ejb.debug.OpenSQLChecker
    Nov 10, 2009 6:49:36 AM                            /System/Server [SAPEngine_Application_Thread[impl:3]_32] Group: List of currently effective properties ended.
    Nov 10, 2009 6:49:36 AM                            /System/Server [SAPEngine_Application_Thread[impl:3]_32] Group: Closing group
    SAP J2EE Engine Version 7.00   PatchLevel 51441.450 is shutting down!  PatchLevel 51441.450 November 22, 2008 15:34 GMT
    Stopping services.
      Service com.adobe~TrustManagerService stopped. (16 ms)
      Service tcdisdic~srv stopped. (0 ms)
      Service com.adobe~DocumentServicesConfiguration stopped. (0 ms)
      Service rfcengine stopped. (0 ms)
      Service webdynpro stopped. (0 ms)
      Service com.adobe~DocumentServicesDestProtoService stopped. (16 ms)
      Service pmi stopped. (31 ms)
      Service tcsecvsi~service stopped. (0 ms)
      Service tcsecdestinations~service stopped. (0 ms)
      Service tcsecwssec~service stopped. (0 ms)
      Service sld stopped. (0 ms)
      Service tcsecsecurestorage~service stopped. (0 ms)
      Service monitor stopped. (62 ms)
      Service adminadapter stopped. (0 ms)
      Service com.adobe~LicenseService stopped. (0 ms)
      Service basicadmin stopped. (15 ms)
      Service tcsmdserver~service stopped. (16 ms)
      Service configuration stopped. (0 ms)
      Service UT stopped. (0 ms)
      Service ejb stopped. (0 ms)
      Service servlet_jsp stopped. (62 ms)
      Service com.adobe~DocumentServicesLicenseSupportService stopped. (0 ms)
      Service ssl stopped. (0 ms)
      Service com.adobe~XMLFormService stopped. (16 ms)
      Service tcseccertrevoc~service stopped. (0 ms)
      Service com.adobe~DocumentServicesBinaries2 stopped. (0 ms)
      Service com.adobe~PDFManipulation stopped. (0 ms)
      Service com.adobe~DataManagerService stopped. (0 ms)
      Service keystore stopped. (0 ms)
      Service jms_provider stopped. (16 ms)
    std_dispatcher.out :
    Loading services.:
      Service keystore started. (16 ms).
      Service iiop started. (78 ms).
      Service httptunneling started. (0 ms).
      Service memory started. (15 ms).
      Service webservices started. (31 ms).
      Service security started. (0 ms).
      Service sld started. (46 ms).
      Service timeout started. (62 ms).
      Service licensing started. (16 ms).
      Service r3startup started. (125 ms).
      Service ssl started. (78 ms).
      Service jmx_notification started. (141 ms).
      Service shell started. (219 ms).
      Service telnet started. (297 ms).
      Service jmx started. (359 ms).
      Service p4 started. (985 ms).
      Service classload started. (16 ms).
      Service log_configurator started. (2968 ms).
      Service configuration started. (16 ms).
      Service jms_provider started. (1187 ms).
      Service tc.monitoring.logviewer started. (1375 ms).
      Service basicadmin started. (1328 ms).
      Service adminadapter started. (0 ms).
      Service http started. (1844 ms).
      Service monitor started. (766 ms).
    ServiceManager started for 6453 ms.
    Framework started for 10766 ms.
    SAP J2EE Engine Version 7.00   PatchLevel 51441.450 is running!
    PatchLevel 51441.450 November 22, 2008 15:34 GMT
    >
    Login :
    SAP J2EE Engine Version 7.00   PatchLevel 51441.450 is shutting down!  PatchLevel 51441.450 November 22, 2008 15:34 GMT
    Stopping services.
      Service classload stopped. (0 ms)
      Service tc.monitoring.logviewer stopped. (0 ms)
      Service p4 stopped. (16 ms)
      Service ssl stopped. (0 ms)
      Service keystore stopped. (0 ms)
      Service iiop stopped. (3000 ms)
      Service adminadapter stopped. (0 ms)
      Service monitor stopped. (15 ms)
      Service security stopped. (0 ms)
      Service jms_provider stopped. (1000 ms)
      Service basicadmin stopped. (0 ms)
      Service jmx stopped. (0 ms)
      Service webservices stopped. (0 ms)
      Service sld stopped. (0 ms)
      Service telnet stopped. (1000 ms)
      Service http stopped. (1000 ms)
      Service timeout stopped. (0 ms)
      Service configuration stopped. (0 ms)
      Service log_configurator stopped. (0 ms)
      Service memory stopped. (0 ms)
      Service r3startup stopped. (0 ms)
      Service licensing stopped. (0 ms)
      Service httptunneling stopped. (0 ms)
      Service shell stopped. (0 ms)
      Service jmx_notification stopped. (0 ms)
    Please suggest me Juan..

  • Users are not able to save pdfs after editing - Adobe XI. They do not use the Win7 explorer preview pane.  If they completely close the Win7 explorer window, they can save - Adobe XI thinks the preview pane is open when it is not.

    Users are not able to save pdfs after editing.  Product is Adobe XI, OS is Win7 64-bit.  When saving, an error pops up that the file cannot be saved, it is in use.  If they save as a different name, it works.  Found several forums/blogs/etc that suggest the problem can be solved by closing the Window7 explorer preview pane.  They don't use the preview pane.  I figured out that if they completely close the explorer window, they can save.  But this means they have to open and close explorer for each file.

    Hi, I would like to chime in and say that this problem has not yet been resolved. It is extremely annoying when all I do is highlight a document in the file explorer and I get 5 errors (evenly spaced out about 20 seconds apart telling me that "Microsoft
    Word Cannot Start (24)". These errors persist even after windows explorer and word are closed. And I don't want to start terminating processes just to make them stop every time.
    I'm a little frustrated with this problem and the other problems I've encountered with MS Office 2013 with file corruption, crashing, 2010 compatibility issues, and the whole host of errors when trying to actually do WORK with Word.
    I do work with long, complex reports in Word because that's the best way available for myself (and my coworkers) to use. However, I sincerely regret upgrading to Office 2013 because of it. I love it, all of its features, and its interface, but I simply cannot
    use it without problems.
    Submitting an official complaint whenever the phone reps start up again in the morning.

  • Backwards Compatibility mapper module was not able to start

    Hi ,
    We have an issue with our SCOM 2012 agents not getting discovered because the Backwards Compatibility mapper module was not able to start.
    I checked few blogs and could see the remediation for SCOM 2007 SP1.
    http://blogs.msdn.com/b/mariussutara/archive/2008/03/11/backwards-compatibility-mapper-fails-to-start-event-on-opsmgr-2007-sp1.aspx
    These are in  the DMZ zone and are manually installed. i have bounced the health service folder as remediation but still looks the same.
    For test i have set the mssing NetBios name for the server and restarted the service. Still the server is not getting discovered and shows the below error.
    Log Name:      Operations Manager
    Source:        HealthService
    Date:          12/8/2014 6:13:23 PM
    Event ID:      1103
    Task Category: Health Service
    Level:         Warning
    Keywords:      Classic
    User:          N/A
    Computer:      Server.cc.domain
    Description:
    Summary: 1 rule(s)/monitor(s) failed and got unloaded, 1 of them reached the failure limit that prevents automatic reload. Management group "MG Group name". This is summary only event, please see other events with descriptions of unloaded rule(s)/monitor(s).
    Log Name:      Operations Manager
    Source:        Health Service Modules
    Date:          12/8/2014 6:13:23 PM
    Event ID:      10720
    Task Category: None
    Level:         Warning
    Keywords:      Classic
    User:          N/A
    Computer:      Server.cc.domain
    Description:
    The Backwards Compatibility mapper module was not able to start because discovery has not fully completed for this Health Service. This is a transient issue, the affected rule(s) will be unloaded and the Health Service will restart them when initialization
    is complete. 
    One or more workflows were affected by this.  
    Workflow name: System.Mom.BackwardCompatibility.ServiceStateMonitoring 
    Instance name: Server.cc.domain
    Instance ID: {E0B732FD-3908-E52B-2EAD-813F42F0C48E} 
    Management group: MG Group name
    Jesty Sam

    Hi Jesty,
    Based on the Article it seems to be for SCOM 2007 SP1.
    And as you mentioned you are using SCOM 2007 R2. I see that Microsoft has fixed this issue about the article you have mentioned above.
    Below is the article from MS for that.
    951380 Some
    computer properties for a cluster node may not be collected by the discovery process in System Center Operations Manager 2007 Service Pack 1
    Check the below link where MS has mentioned it has fixed this issue in SCOM 2007 R2.
    http://support.microsoft.com/kb/971410
    So i dont think it is necessary for
    you to install this Hotfix
    Gautam.75801

  • SAPMMC Java instance not able to start

    Hi All,
    I have installed CE.7.1 version yesterday after installing the same
    In SAPMMC Java instance -xxxx00) and the central services instance xxxxx01 both have been started.
    But when I am trying today java instance which is -xxxx00 is not able start.
    Here we can see 2 process 1 is Jstart.Exe (As java) which is showing status as stopped
    Where as igswd.exe which is showing running.
    So here problem is Jstart.Exe (As java) is not able to start.
    Can you suggest me what should I do to activate the same?
    Regards
    Ishikesh

    Hi Ishiikesh,
    Please check and update JAVA_HOME system enviromental variable in my computer (My computer > Priperties >> Advance >> Startup and Recovery >> Enviromental Variable >> System Variables >> Add new JAVA_HOME parameter with path for installed Java JDK)
    Also please check database server services (Start > Run > Services.msc >> Start your database services manually and change properties as automatic)
    Then try to re-start the server.
    Hope it helps
    Regards
    Arun

Maybe you are looking for

  • How to deploy and run  EJB in eclipse without XDoclet

    Hi Friends I am new in j2ee.In my academic project i want to do some ejb programming. For that purpose i want to write some ejb's.I have written all required class for ejb,created ejb-jar.xml file manually,weblogic .xml file manually. I am using webl

  • How to read the raw (volt) value of a AI scaled Fieldpoint Channel in Labiew?

    Is there a labview native vi to read the Raw value of a pre-scaled (Max) fieldpoint channel?  I can't seem to find anything in the advanced palette either... Thanks...

  • Error:ora-01031 Insuffiecient Privileges when using "conn / as sysdba"?

    HI all, I used oracle to login and used dbca to create a database. export ORACLE_SID=db9i sqlplus /nolog conn / as sysdba Error:ora-01031 Insuffiecient Privileges Notes: I can use "conn sys/pwd as sysdba" to connect instance.

  • Crash during firmware update

    I just tried to update my iPod Shuffle. I ran iPod Updater, it said "Update needed" and I clicked update button. In the middle of the update, Windows crashed and the iPod seems to be dead now. It isn't recognized by Windows anymore and iPod updater j

  • Acrobat Reader problem in mini-PC

    Hello, I have a mini PC, and can't use some preference settings in Adobe Acrobat Reader due to too small screen. For example, I can´'t see the OK-button.  Adobe has no scrollbar. Anybody who know how to solve this problem?