Not able to start the RAC database service

Hi Experts,
I have created a RAC Database service . I have made two instances as preferred and no instance as available. When i am trying to start the service
(srvctl start service -s newser -d newdb) , the command is hanging.
Please help me out.
Thanks and Regards.

Hi Ivan,
Grateful for the clue.
We got the similar issue in the following 2 node RAC setting:
- hpux 11.31 v3 (rx3600 series)
- Oracle 10.2.0.4
I discovered in the logs under $ORACLE_HOME/log/node_1/racg/imon_some_db.log" :
2011-07-02 12:26:33.193: [ RACG][19] [3903][19][ora.bw_st.bw_st1.inst]: GIMH: GIM-00104: Health check failed to connect to instance.
GIM-00090: OS-dependent operation:mmap failed with status: 12
GIM-00091: OS failure message: Not enough space
GIM-00092: OS failure occurred at: sskgmsmr_13
Will try the patch to see whether gets fixed.
Best Regards,

Similar Messages

Not able to start one rac database

We had a 4 node RAC(11.2) environment in RH Linux.
it was running fine. By mistake we change the owner of the mount point where oracle clusterware and database installed on first node.
chown -R oracle:oinstall /u01
chmod -R 775 /u01
Due to this all services went down.
Later we change the owner, as it is on node2 and restart the services and server.
Now all the services are working fine. But oracle database is not coming up.
It is not able to read the spfile from ASM.
It is giving the error:
[oracle@ch-racsvr1 trace]$ sqlplus / as sysdba
SQL*Plus: Release 11.2.0.1.0 Production on Wed Oct 6 21:52:27 2010
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Connected to an idle instance.
SQL> startup
ORA-01078: failure in processing system parameters
ORA-01565: error in identifying file '+ORA_DATA/sgspace/spfilesgspace.ora'
ORA-17503: ksfdopn:2 Failed to open file +ORA_DATA/sgspace/spfilesgspace.ora
ORA-01034: ORACLE not available
ORA-27123: unable to attach to shared memory segment
Linux-x86_64 Error: 13: Permission denied
Additional information: 7077890
Additional information: 10
Please suggest, as i Think it is permissions issues. some file have permissions as rwsr-s--x in other nodes.

Hi;
You have related permisson on your path? You have permisson error.
By the way i suggest move your thread to Forum Home » Grid Computing » Real Application Clusters which you could get more quick response
Regard
Helios

Not able to start the oracle database with ASM

HI all,
WE are using oracle10.2.0.1 on OEL5.
I have mounted ASM but when i try to start the oracle database, it is asking "db is already started shut it down first"
[root@localhost ~]# /etc/init.d/oracleasm listdisks
VOL1
VOL2
[root@localhost ~]#
[root@localhost ~]# su - oracle
-bash-3.2$ sqlplus /nolog
SQL*Plus: Release 10.2.0.1.0 - Production on Mon May 31 02:12:06 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL> shutdown
ORA-01012: not logged on
SQL> startp mount
SP2-0734: unknown command beginning "startp mou..." - rest of line ignored.
SQL> conn / as sysdba
Connected.
SQL> shutdown
ASM diskgroups dismounted
ASM instance shutdown
SQL> startup mount
ASM instance started
Total System Global Area 130023424 bytes
Fixed Size                  2019032 bytes
Variable Size             102838568 bytes
ASM Cache                  25165824 bytes
ASM diskgroups mounted
SQL> exit
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
-bash-3.2$ export ORACLE_SID=dbtest
-bash-3.2$ sqlplus /nolog
SQL*Plus: Release 10.2.0.1.0 - Production on Mon May 31 02:13:30 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL> exit
-bash-3.2$ cd /u01/app/oracle/admin/dbtest/pfile/
-bash-3.2$ ls -l
total 8
-rw-r----- 1 oracle oinstall 2442 May 27 23:07 init.ora.427201023913
-rw-r--r-- 1 oracle oinstall 1406 May 31 01:44 sqlnet.log
-bash-3.2$ pwd
/u01/app/oracle/admin/dbtest/pfile
-bash-3.2$ sqlplus /nolog
SQL*Plus: Release 10.2.0.1.0 - Production on Mon May 31 02:14:00 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL> exit
-bash-3.2$ sqlplus "/as sysdba"
SQL*Plus: Release 10.2.0.1.0 - Production on Mon May 31 02:14:09 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
SQL> startup pfile="/u01/app/oracle/admin/dbtest/pfile/init.ora.427201023913';
ORA-01081: cannot start already-running ORACLE - shut it down first
SQL>
-bash-3.2$ ps -ef|grep ora
root      5501 5483 0 00:32 ?        00:00:00 hald-addon-storage: polling /dev/hdc
root      6333     1 0 00:32 ?        00:00:00 /bin/su -l oracle -c sh -c 'cd /u01/app/oracle/product/10.1.0/db_1/log/localhost/cssd; ulimit -c unlimited; exec /u01/app/oracle/product/10.1.0/db_1/bin/ocssd '
oracle    6527 6333 0 00:33 ?        00:00:00 /u01/app/oracle/product/10.1.0/db_1/bin/ocssd.bin
oracle    6849     1 0 00:49 ?        00:00:00 /u01/app/oracle/product/10.1.0/db_1/bin/tnslsnr LISTENER -inherit
root      7637 7617 0 01:53 pts/2    00:00:00 su - oracle
oracle    7638 7637 0 01:53 pts/2    00:00:00 -bash
root      7751 6763 0 02:11 pts/1    00:00:00 su - oracle
oracle    7752 7751 0 02:11 pts/1    00:00:00 -bash
oracle    7773     1 0 02:12 ?        00:00:00 oracledbtest (DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))
oracle    7777     1 0 02:13 ?        00:00:00 asm_pmon_dbtest
oracle    7779     1 0 02:13 ?        00:00:00 asm_psp0_dbtest
oracle    7781     1 0 02:13 ?        00:00:00 asm_mman_dbtest
oracle    7783     1 0 02:13 ?        00:00:00 asm_dbw0_dbtest
oracle    7785     1 0 02:13 ?        00:00:00 asm_lgwr_dbtest
oracle    7787     1 0 02:13 ?        00:00:00 asm_ckpt_dbtest
oracle    7789     1 0 02:13 ?        00:00:00 asm_smon_dbtest
oracle    7791     1 0 02:13 ?        00:00:00 asm_rbal_dbtest
oracle    7793     1 0 02:13 ?        00:00:00 asm_gmon_dbtest
oracle    7805 7752 0 02:15 pts/1    00:00:00 ps -ef
oracle    7806 7752 0 02:15 pts/1    00:00:00 grep ora
-bash-3.2$
{code}
so anybody can help me how to start the oracle database....

-bash-3.2$ sqlplus "/as sysdba"
SQL*Plus: Release 10.2.0.1.0 - Production on Mon May 31 02:26:11 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
SQL> show parameter instance
NAME                                 TYPE        VALUE
active_instance_count                integer
cluster_database_instances           integer     1
instance_groups                      string
instance_name                        string      dbtest
instance_number                      integer     0
instance_type                        string      asm
open_links_per_instance              integer     4
parallel_instance_group              string
parallel_server_instances            integer     1
SQL>
-bash-3.2$ sqlplus "/as sysdba"
SQL*Plus: Release 10.2.0.1.0 - Production on Mon May 31 02:26:11 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
SQL> show paramete instance_name
SP2-0158: unknown SHOW option "paramete"
instance "local"
SP2-0158: unknown SHOW option "_name"
SQL> show parameter instance
NAME                                 TYPE        VALUE
active_instance_count                integer
cluster_database_instances           integer     1
instance_groups                      string
instance_name                        string      dbtest
instance_number                      integer     0
instance_type                        string      asm
open_links_per_instance              integer     4
parallel_instance_group              string
parallel_server_instances            integer     1
SQL>
-bash-3.2$ ps -ef|grep pmon
oracle    7777     1 0 02:13 ?        00:00:00 asm_pmon_dbtest
oracle    7851 7752 0 02:32 pts/1    00:00:00 grep pmon
-bash-3.2$
-bash-3.2$

Not able to Start the oracle db error "ORA-01031: insufficient privileges"

Hi experts,
I have oracle 11g setup on so solaris. i changed the db_cache_size
& processes values and stopped the DB services after that i am not able to start the oracle DB. Listener is running.
when i start the db server its giving the below error(startup.log)
./dbstart: Starting up database "orcl"
Mon Sep 27 04:31:08 MDT 2010
SQL*Plus: Release 11.1.0.7.0 - Production on Mon Sep 27 04:31:08 2010
Copyright (c) 1982, 2008, Oracle. All rights reserved.
SQL> ERROR:
ORA-01031: insufficient privileges
SQL> ORA-01031: insufficient privileges
SQL>
./dbstart: Database instance "orcl" warm started.
Please help me to ressolve this issue.
Thanks
Krishna

yes, password file is there in /etc/passwd
here are the contents:
root:x:0:0:Super-User:/:/sbin/sh
lroot:x:0:0:Super-User:/:/sbin/sh
daemon:x:1:1::/:
bin:x:2:2::/usr/bin:/bin/false
sys:x:3:3::/:
adm:x:4:4:Admin:/var/adm:/bin/false
lp:x:71:8:Line Printer Admin:/usr/spool/lp:/bin/false
uucp:x:5:5:uucp Admin:/usr/lib/uucp:/bin/false
nuucp:x:9:9:uucp Admin:/var/spool/uucppublic:/usr/lib/uucp/uucico
listen:x:37:4:Network Admin:/usr/net/nls:/bin/false
nobody:x:60001:60001:Nobody:/:/bin/false
noaccess:x:60002:60002:No Access User:/:/bin/false
nobody4:x:65534:65534:SunOS 4.x Nobody:/:/bin/false
itunix:x:50000:14:IT Unix Account:/export/home/itunix:/bin/csh
hharika:x:765:38:Harpal Harika:/export/home/hharika:/bin/csh
prsingh:x:795:38:Pradeep Singh:/export/home/prsingh:/bin/csh
mmir:x:1229:21:Mir Monis Ali:/export/home/mmir:/bin/csh
bogunnai:x:1207:21:Bose Ogunnaike:/export/home/bogunnai:/bin/ksh
mpokala:x:2117:21:Mahesh Pokala:/export/home/mpokala:/bin/ksh
apopov:x:2385:38:Anton Popov:/export/home/apopov:/bin/csh
kkeith:x:2629:227:Kevin Keith:/home/kkeith:/usr/bin/ksh
sshd:x:22:22:SSH Privsep:/var/empty:/bin/false
patrol:x:2784:10:Patrol User:/opt/bmc:/usr/bin/ksh
smmsp:x:25:25:Sendmail Submission user:/none:/bin/false
ldap:x:50001:1002::/export/home/ldap:/bin/sh
perfuser:x:884:268::/export/home/perfuser:/bin/csh
webservd:x:80:80::/home/webservd:/bin/pfsh
oracle:x:156:40:Oracle Software Owner:/export/home/oracle:/bin/bash
perfuser_idc:x:64383:1::/home/perfuser_idc:/bin/sh
idc_perf:x:64384:292::/home/idc_perf:/bin/sh

Not able to start the weblogic server ....

Hi All,
I am using JDeveloper 11.1.1.6 .
I am not able to start the weblogic server .I am getting below Exception .I am not sure where I need to check,,
Error at line:2333 col:31 '' expected a valid beginning name character
at weblogic.xml.babel.scanner.Name.read(Name.java:33)
    at weblogic.xml.babel.scanner.Name.read(Name.java:20)
    at weblogic.xml.babel.scanner.OpenTag.read(OpenTag.java:58)
    at weblogic.xml.babel.scanner.Scanner.startState(Scanner.java:251)
    at weblogic.xml.babel.scanner.Scanner.scan(Scanner.java:178)
    at weblogic.xml.babel.baseparser.BaseParser.accept(BaseParser.java:533)
    at weblogic.xml.babel.baseparser.Space.parse(Space.java:19)
    at weblogic.xml.babel.baseparser.BaseParser.parseElement(BaseParser.java:474)
    at weblogic.xml.babel.baseparser.BaseParser.parseSome(BaseParser.java:326)
    at weblogic.xml.stax.XMLStreamReaderBase.advance(XMLStreamReaderBase.java:195)
    at weblogic.xml.stax.XMLStreamReaderBase.next(XMLStreamReaderBase.java:237)
    at oracle.security.jps.internal.policystore.xml.StaxPolicyStoreParser.processFunctionParameters(StaxPolicyStoreParser.java:2207)
    at oracle.security.jps.internal.policystore.xml.StaxPolicyStoreParser.processFunction(StaxPolicyStoreParser.java:2135)
    at oracle.security.jps.internal.policystore.xml.StaxPolicyStoreParser.processFunctions(StaxPolicyStoreParser.java:2072)
    at oracle.security.jps.internal.policystore.xml.StaxPolicyStoreParser.processAppPolicy(StaxPolicyStoreParser.java:796)
    at oracle.security.jps.internal.policystore.xml.StaxPolicyStoreParser.processPolicyStore(StaxPolicyStoreParser.java:521)
    at oracle.security.jps.internal.core.datastore.xml.XmlDataStoreParser.getDataStoreEntryStax(XmlDataStoreParser.java:120)
    at oracle.security.jps.internal.core.datastore.xml.XmlDataStoreParser.getDataStoreEntry(XmlDataStoreParser.java:180)
    at oracle.security.jps.internal.core.datastore.xml.XmlDataStoreParser.getDataStoreEntry(XmlDataStoreParser.java:187)
    at oracle.security.jps.internal.core.datastore.xml.XmlDataStore.loadXmlDataStore(XmlDataStore.java:411)
    at oracle.security.jps.internal.core.datastore.xml.XmlDataStore.<init>(XmlDataStore.java:276)
    at oracle.security.jps.internal.core.datastore.xml.XmlDataStore.getInstance(XmlDataStore.java:209)
    at oracle.security.jps.internal.policystore.xml.XmlPolicyStore.buildFromFile(XmlPolicyStore.java:492)
    at oracle.security.jps.internal.policystore.xml.XmlPolicyStore.<init>(XmlPolicyStore.java:276)
    at oracle.security.jps.internal.policystore.xml.XmlPolicyStoreProvider.getInstance(XmlPolicyStoreProvider.java:100)
    at oracle.security.jps.internal.policystore.xml.XmlPolicyStoreProvider.getInstance(XmlPolicyStoreProvider.java:74)
    at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.findServiceInstance(ContextFactoryImpl.java:139)
    at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.getContext(ContextFactoryImpl.java:170)
    at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.getContext(ContextFactoryImpl.java:191)
    at oracle.security.jps.internal.core.runtime.JpsContextFactoryImpl.getContext(JpsContextFactoryImpl.java:132)
    at oracle.security.jps.internal.core.runtime.JpsContextFactoryImpl.getContext(JpsContextFactoryImpl.java:127)
    at oracle.security.jps.internal.policystore.PolicyUtil$2.run(PolicyUtil.java:2827)
    at oracle.security.jps.internal.policystore.PolicyUtil$2.run(PolicyUtil.java:2821)
    at java.security.AccessController.doPrivileged(Native Method)
    at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPDPService(PolicyUtil.java:2821)
    at oracle.security.jps.internal.policystore.PolicyUtil.getPDPService(PolicyUtil.java:3097)
    at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:164)
    at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:369)
    at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
    at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
    at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
    at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
    at java.lang.Class.newInstance0(Class.java:355)
    at java.lang.Class.newInstance(Class.java:308)
    at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1339)
    at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1018)
    at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
    at weblogic.security.SecurityService.start(SecurityService.java:141)
    at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
<Jul 19, 2013 11:11:09 AM IST> <Error> <Security> <BEA-090892> <The loading of OPSS java security policy provider failed due to exception, see the exception stack trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: Cannot read from policy store. Reason is PolicyStore Error, javax.xml.stream.XMLStreamException: Error at line:2333 col:31 '
Thanks ...

hi user,
did you check this.
diehn.net/blog &raquo; Blog Archive &raquo; Weblogic AdminServer refused to start &#8211; truncated syste…

Not able to start the listener in oracle 10g after the domain name changed

Hi
I had installed the oracle 10g on zLinux. It was working fine( was able to mount the database and start the listener). Now my server's domain name got changed. So i have added the new domain name in the tnsnames.ora and listeners.ora file . now i could able to mount the databases but am not able to start the listener . whille starting the listener , am getting the following error
oracle@ptcr4d00:~> lsnrctl start
LSNRCTL for Linux: Version 10.2.0.2.0 - Production on 05-AUG-2009 10:31:05
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting /opt/oracle/10g/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 10.2.0.2.0 - Production
System parameter file is /opt/oracle/10g/network/admin/listener.ora
Log messages written to /opt/oracle/10g/network/log/listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=PTCR4D00)(PORT=1521)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
TNS-12547: TNS:lost contact
TNS-12560: TNS:protocol adapter error
TNS-00517: Lost contact
Linux Error: 104: Connection reset by peer
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=PTCR4D00)(PORT=1521)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
Linux Error: 111: Connection refused
I have posted the contents of the tnsnames.ora and listeners.ora
TNSNAMES.ORA
TC =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = PTCR4D00)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = TC)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
LISTENERS.ORA
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /opt/oracle/10g)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS = (PROTOCOL = TCP)(HOST = PTCR4D00)(PORT = 1521))
Could you please help me to resolve this issue ?
Regards
Mani

Hi
Please find the content of the /etc/hosts below
# IP-Address Full-Qualified-Hostname Short-Hostname
#127.0.0.1 localhost
9.124.114.49 PTCR4D00
# special IPv6 addresses
::1 localhost ipv6-localhost ipv6-loopback
fe00::0 ipv6-localnet
ff00::0 ipv6-mcastprefix
ff02::1 ipv6-allnodes
ff02::2 ipv6-allrouters
ff02::3 ipv6-allhosts
9.124.114.49 PTCR4D00 PTCR4D00
Regards
Mani

Not able to start the Sun Java System Access Manager 7 Console

Hi All,
I have successfully installed the Sun Java System Portal Server 7 on RHEL 4.0.The problem I am facing is not able to start the Sun Java System Access Manager 7 Console while accessing the URL: http://fqdn:8080/amconsole
As soon as I try to access this URL it gives me following Excepiton:::::::
type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
com.iplanet.jato.NavigationException: Exception encountered during forward
Root cause = [java.lang.NullPointerException]
     com.iplanet.jato.view.ViewBeanBase.forward(ViewBeanBase.java:386)
     com.iplanet.jato.view.ViewBeanBase.forwardTo(ViewBeanBase.java:267)
     com.iplanet.am.console.base.ConsoleServletBase.onUncaughtException(ConsoleServletBase.java:338)
     com.iplanet.jato.ApplicationServletBase.fireUncaughtException(ApplicationServletBase.java:1023)
     com.iplanet.jato.ApplicationServletBase.processRequest(ApplicationServletBase.java:469)
     com.iplanet.jato.ApplicationServletBase.doPost(ApplicationServletBase.java:324)
     com.iplanet.jato.ApplicationServletBase.doGet(ApplicationServletBase.java:294)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:747)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:860)
     sun.reflect.GeneratedMethodAccessor106.invoke(Unknown Source)
     sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     java.lang.reflect.Method.invoke(Method.java:585)
     org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:249)
     java.security.AccessController.doPrivileged(Native Method)
     javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
     org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:282)
     org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:165)
If anyone have any idea about the cause of this error,please let me know.All suggestions are welcome .
Thanx and Regards,
Chirag.

Hi All,
I am having exactly the same problem with the same stack trace. Has anybody have an idea how to fix this?
I have downloaded the Java Identity Management Suite.(java_es-5-identsuite-ga-windows-x86.zip) The first time installation was fine and I was able to bring the Access Manager console. I was able to create users groups etc.
However, when I uninstalled and installed it again, I got exactly the same error described in the thread. Running "amserver start" and "amserver restart" did not help. I did the installation one more time
but again I got the same error.
Thanks for the help.
celikkan

Not able to Start Hyperion EPM Architect services

Hi,
I have been facing issues with accessing FDM web application. The Error Desc is " An exception occured during the execution of the current web request. Please contact the administrator to review the stac trace in the event log for more information about the error."
So we have tried to stop/restarted the Hyperion Services in Prod FDM server. But we are not able to start the below services after the stopping the services.
Hyperion EPM Architect - Web Application
Hyperion EPM Architect - Process Manager
Hyperion EPM Architect - Job Manager
Hyperion EPM Architect - Event Manager
Hyperion EPM Architect - Engine Manager
Hyperion EPM Architect - .Net JNI Bridge
Also, we have rebooted the server. But these services are not up after the reboot. Please could you help to resolve this issue.
Thanks,
Aravindh K

Thanks John. I got help from Oracle Support team to resolve the issue. This is a Common issue with the 11.1.1.3 version, the services take some time and Sometime start once before the other hence the issue. The issue is resolved after restarting the services manually in order.

NOt able to start the listener..

After Indtalling oracle 11g .. i am not able to start the listener
dbstart $ORACLE_HOME
lsnrctl start
ORACLE_SID=orcl
export ORACLE_SID
lsnrctl start
[oracle@test1 bin]$ lsnrctl start
LSNRCTL for Linux: Version 11.1.0.6.0 - Production on 27-DEC-2012 15:35:36
Copyright (c) 1991, 2007, Oracle. All rights reserved.
Starting /u01/app/oracle/product/11.1.0/db_1/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 11.1.0.6.0 - Production
System parameter file is /u01/app/oracle/product/11.1.0/db_1/network/admin/listener.ora
Log messages written to /u01/app/oracle/diag/tnslsnr/test1/listener/alert/log.xml
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1521)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=test1.com)(PORT=1521)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.1.0.6.0 - Production
Start Date 27-DEC-2012 15:35:37
Uptime 0 days 0 hr. 0 min. 0 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/11.1.0/db_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/diag/tnslsnr/test1/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=test1.com)(PORT=1521)))
**The listener supports no services**The command completed successfully
tried all posibalaties as here
Oracle 11g Listener Supports No services
Please help me beacuse of which my work is struck for whole day

[oracle@test1 bin]$ ps -ef|grep tns
oracle 13498 11176 0 16:41 pts/5 00:00:00 grep tns
[oracle@test1 bin]$
[oracle@test1 bin]$ lsnrctl start
LSNRCTL for Linux: Version 11.1.0.6.0 - Production on 27-DEC-2012 16:41:08
Copyright (c) 1991, 2007, Oracle. All rights reserved.
Starting /u01/app/oracle/product/11.1.0/db_1/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 11.1.0.6.0 - Production
System parameter file is /u01/app/oracle/product/11.1.0/db_1/network/admin/listener.ora
Log messages written to /u01/app/oracle/diag/tnslsnr/test1/listener/alert/log.xml
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1521)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=test1.com)(PORT=1521)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.1.0.6.0 - Production
Start Date 27-DEC-2012 16:41:10
Uptime 0 days 0 hr. 0 min. 0 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/11.1.0/db_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/diag/tnslsnr/test1/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=test1.com)(PORT=1521)))
The listener supports no services+The command completed successfully
[oracle@test1 bin]$
[oracle@test1 bin]$ echo $ORACLE_SID
orcl
[oracle@test1 bin]$ echo $ORACLE_HOME
/u01/app/oracle/product/11.1.0/db_1
[oracle@test1 bin]$
[oracle@test1 bin]$

Not able to registred the external Web service on CF8

I am not able to registred the external Web service on CF8 (Error creating web service. Please ensure that you have entered a correct Web Service name or URL.), but same Web service has no problem on CF6.1

Hi,
Please close this duplicated thread.
Thanks & Regards,
Nagarajan

Not able to start the Connection Digital Networking Replication Agent Service

Hi All,
I am getting the following alert through RTMT, when i tried to start the service in Unity Connection Serviceability, it doesn't start. Unity Connection 8.5.1. It is still in the stopped status, Although service is not important, however it is pushing a lot of rtmt alert. Could you please help me how to start this Connection Digital Networking Replication Agent Service.
Service operational status is DOWN. Connection Digital Networking Replication Agent.
Thanks
Barry

Thanks for Nadeem and Aokanlawon, for the quick reply.
1. You are right i got only one cluster i understand its not working, However howcome this service was started in pub UC and was working. I will disable anyway now as i got only one cluster. It all started when I started to fix the following alerts which was pushed by sub Unity Connections(Branchsite)
Failed to retrieve DbSpace usage information when running the "Monitor the Unity Connection databases" SysAgent task.
This alert started coming after there was a network connection drop between HQ cucm and the branch sub UC, after the drop, all ports disconnected between these two servers, services deactivated in Sub UC, after the network connection back again, ports connected back and the most of the services activated. However the following services were not in the running state in Sub UC. I found these information from the sysagent trace log. I thought to fix this error is to start the Connection Database Proxy in Sub UC. However this has stopped the following service 'Connection' Database Proxy' and 'Connection Digital Network Replication Agent' in Pub UC. I managed to start Connection Database Proxy in Pub UC, however Connection Digital Network Replication agent is now in deactivated status.
Critical Services
connection exchange notification web service
connection mailbox sync
connection message transfer agent
connection notifier
Optional services
Connection Database Proxy
Connection Digital Networking Replication Agent
Connection Speechview processor
2. How do I stop the alert from sub UC
Failed to retrieve DbSpace usage information when running the "Monitor the Unity Connection databases" SysAgent task.
Thanks

Not able to start the Presentation services and BI Server

Hi,
My prsentation services has gone down, after the changed the default rpd and oped another rpd which was password lock. De-Commented the AUTHENTICATION_TYPE = BYPASS_NQS and restarted the BI Server and stopped it again, then logged into the rpd without any password and then changed the password and close the BI Admin tool and started the BI Server.
But now the presentation server is not starting."Could not start the BI Presentation Services on the Local Computer. For more information, review system event log....."
The instanceconfig.xml has the right path "<CatalogPath>C:/OracleBIData/web/catalog/xxx</CatalogPath>
the catalog is the same as what is mentioned in the NSQConfig.ini.
Never this this kind of error before.
Can somebody please help.
Rgds,
Amit

Hi Saichand,
Sorry i had resolved it. Actually i had done some cryptotools for adding the Impersonator, and when i changed the RPD it gave me error bcos of that, i removed the entries from
credentialstore.xml and also from instanceconfig.xml and the Presentation Services where up.
I really appreciate your promptness in answering the question, do u get an alert in email or you keeping checking the site.
Thanks & Rgds
Amit

Not able to start the NW04 CI instance.

Hi All,
I installed NW04 JAVA with EP 6.0 on Windows 2003 SP1 with MS SQL. I configured SCS and CI to run on Virtual hosts SAPENQ01 and SAPJ2EE respectively for HA. I have two node cluster. When I start CI and SCS on same host they started just fine and everything is working. I switched the SCS instance group to second node and tried to start the CI instnce on first node. The CI is not able to start.
I tried starting CI manually also ... bust it just gives message on command line saying "STARTSAP continues ... ". No logs are created. It never starts jcontrol.exe process. And also when I see SAP MMC ... it is not showing SAP instances there.
Any help is greatly appreciated.
TIA,
cvr/

Hi,
Did you adjust the profile files of the Web AS so that they use the virtual host names (wherever host names are used), not the real host names. For example, if the host name of the message server in the profile is the real hostname of the machine, after the switchover connection to message server would not be possible.
In addition, you would also have to check the DB connection settings (through the config tool) and make sure the virtual hostnames are used there too.
Hope that helps.
P.S. the logs of the startsap are generated in the \usr\sap\<SID>\SCS<nr>\work\sapstart.log.

Not able to start the shadow instance in java only system

Hi All,
we are upgrading our portal system from 7.0 to 7.3EHP1 in oracle with HP-UX OS. We have started the upgrade and currently is in deploy shadow instance step of per-processing phase.we are getting error in deploy shadow instance step as below.
====================================================
Could not update components. Deployment of queue Queue_2014.07.17 at 17:00:17 completed with error Deployment error. See log /download/SUM/sdt/log/SWITCH/deploy_api.0.log for details. java.lang.RuntimeException: com.sap.engine.services.dc.api.deploy.EngineTimeoutException: [ERROR CODE DPL.DCAPI.1041] Deploy API could not retrieve the Result after 7200000 ms. Possible reasons: 1.J2EE Engine cannot start. Please check in Sap MMC or jcmon the engine status. -If the server is stopped please check the server log files why the engine cannot start. 2.Engine is up and running but deploy controller could not be looked up due to some Runtime exception. Please start telnet session to the SAP Application Server , check if the tc~bl~deploy_controller service is started. com.sap.engine.services.dc.api.deploy.EngineTimeoutException: [ERROR CODE DPL.DCAPI.1041] Deploy API could not retrieve the Result after 7200000 ms. Possible reasons: 1.J2EE Engine cannot start. Please check in Sap MMC or jcmon the engine status. -If the server is stopped please check the server log files why the engine cannot start. 2.Engine is up and running but deploy controller could not be looked up due to some Runtime exception. Please start telnet session to the SAP Application Server , check if the tc~bl~deploy_controller service is started.
===========================================================
We have observed that, shadow instance service only is not running. we tried to start the shadow instance services manually, same failing again .Only shadow central instance services(SCS) came up and running .Still shadow service is not coming up.
Please find the shadow instance service status.
==========================================================
epqas:eq1adm 50> sapcontrol -nr 02 -function GetProcessList
18.07.2014 01:48:11
GetProcessList
OK
name, description, dispstatus, textstatus, starttime, elapsedtime, pid
jstart, J2EE Server, GRAY, Stopped, , , 14997
epqas:eq1adm 51>
===========================================================
Kindly find the attached deploy shadow instance log and shadow work directory files. Please suggest me, if you came across this issue.
Kubendran A

please remove the archive, because if you use cache_archive, you can not use archive at same time for the same jar file.
Cooljavaus

After bring the Cluster and ASM is up, I'm not able to start the rdbms ins.

I am not able to bring the database up.
Cluster and ASM is up and running.
ORA-01078: failure in processing system parameters
LRM-00109: could not open parameter file '/oracle/app/oracle/product/11.1.0/db_1/dbs/initTMISC11G.ora'

That is wre the confusion is: I coud nt find it under O_H/dbs,
However the log file indicates that it is using spfile which is located at :
spfile = +DATA_TIER/dintw10g/parameterfile/spfile_dintw10g.ora
Now it checks only the /dbs directory only i guess.
Could you please how can i bring it up now.
Just for the information: ASM instance is up.

Not able to start the RAC database service

Similar Messages

Maybe you are looking for